RE: [Asterisk-Users] Echo on a PRI
Thanks Everyone! I appreciate all the feed back. Right now I am using a Digium T400P card and my system, although it is fast, has a slight load, about 15% due to some mysql activity. I know that Digium as a new card the TE410P. Does anyone have any experience in the new card and is the speed difference likely to help with the echo? Also, if I put in a second processor, is that likely to help with the echo? Thanks Again, Dave -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Goldfein Sent: Monday, July 19, 2004 5:13 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Echo on a PRI Hi, I recently set up the following in a production system (2.8 GHZ Xeon, 1 Gig Memory, Dell 2650). Telco - PRI - Asterisk - T1 - PBX I am getting an occasional noticeable echo on some of the phone lines (random inbound and outbound). Everyone I ask keeps telling me that I can't be having echo since I am on a PRI, which is a digital circuit. Ok, so I can't be having echo, but I am! Does anyone have any ideas of what might be causing the echo in this situation? Thanks, Dave ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Echo on a PRI
It does seem to be on its own irq. Detected Tormenta 2 Quad T1/PRI or E1/PRA at 0xfcf00800/0xfcf0 irq 20 Nothing else seems to be on irq 20. I don't know enough about the following line to know if it has any impact: PCI-APIC IRQ transform: (B1,I8,P0) - 20 Thanks, Dave -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wiley E. Siler Sent: Monday, July 19, 2004 5:28 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] Echo on a PRI I think I saw a reference to a similar problem and it regarded IRQ issues on the machine in question. IF there was IRQ sharing, cagey things happened. But if the T1 card had a static IRQ, it resolved the issue. Does your T1 card have a dedicated IRQ? I am sure someone will be able to explain further and possibly give you some validation on your Mobo too? Thanks, Wiley -Original Message- From: David Goldfein [mailto:[EMAIL PROTECTED] Sent: Monday, July 19, 2004 5:13 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Echo on a PRI Hi, I recently set up the following in a production system (2.8 GHZ Xeon, 1 Gig Memory, Dell 2650). Telco - PRI - Asterisk - T1 - PBX I am getting an occasional noticeable echo on some of the phone lines (random inbound and outbound). Everyone I ask keeps telling me that I can't be having echo since I am on a PRI, which is a digital circuit. Ok, so I can't be having echo, but I am! Does anyone have any ideas of what might be causing the echo in this situation? Thanks, Dave ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Echo on a PRI
Hi, I recently set up the following in a production system (2.8 GHZ Xeon, 1 Gig Memory, Dell 2650). Telco - PRI - Asterisk - T1 - PBX I am getting an occasional noticeable echo on some of the phone lines (random inbound and outbound). Everyone I ask keeps telling me that I can't be having echo since I am on a PRI, which is a digital circuit. Ok, so I can't be having echo, but I am! Does anyone have any ideas of what might be causing the echo in this situation? Thanks, Dave ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Two outbound calls at once
Actually, if I place 2 calls at once, one from the Vodavi and one from a single line on a channel bank, it all works correctly. If I place 2 calls at once from the Vodavi (attached to * via a T1, not PRI) I have the problem. It doesn't matter what numbers I call. There is no problem placing 2 calls at once from the Vodavi when it is connected directly to the CO, but only when I run it through *. Thanks, Dave -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of C. Maj Sent: Friday, July 09, 2004 8:43 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Two outbound calls at once On Thu, 8 Jul 2004, David Goldfein waxed: Hello, I am having an issue with making two simultaneous outbound calls. When I dial, both phones try to take the same channel and it causes an error. Anyone have any suggestions. My set up is as follows: CO - PRI - ASTERISK - VODAVI(pbx). Thanks, Dave *CLI 8's It doesn't look like you have a channel collision problem, other than the same far end number being dialed. Are you able to place at least one call with success ? --Chris -- Chris Maj, Rochester cmaj_at_freedomcorpse_dot_com Pronunciation Guide: Maj == May ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Two outbound calls at once
Hello, I am having an issue with making two simultaneous outbound calls. When I dial, both phones try to take the same channel and it causes an error. Anyone have any suggestions. My set up is as follows: CO PRI ASTERISK VODAVI(pbx). Thanks, Dave *CLI -- Starting simple switch on 'Zap/69-1' -- Executing Wait(Zap/69-1, .1) in new stack -- Executing DISA(Zap/69-1, no-password|local) in new stack -- Starting simple switch on 'Zap/68-1' -- Executing Wait(Zap/68-1, .1) in new stack -- Executing DISA(Zap/68-1, no-password|local) in new stack Jul 8 20:44:20 WARNING[-1394406480]: cdr.c:286 ast_cdr_init: CDR already initialized on 'Zap/69-1' -- Executing Dial(Zap/69-1, Zap/g2/6022831234) in new stack -- Called g2/6022831234 Jul 8 20:44:20 WARNING[-1416709200]: cdr.c:286 ast_cdr_init: CDR already initialized on 'Zap/68-1' -- Executing Dial(Zap/68-1, Zap/g2/6022831234) in new stack -- Called g2/6022831234 -- Channel 0/2, span 2 got hangup -- Forcing restart of channel 0/2 on span 2 since channel reported in use -- Hungup 'Zap/26-1' == No one is available to answer at this time -- Executing Congestion(Zap/68-1, ) in new stack -- Channel 0/1, span 2 got hangup -- B-channel 0/2 successfully restarted on span 2 -- Hungup 'Zap/25-1' == No one is available to answer at this time -- Executing Congestion(Zap/69-1, ) in new stack == Spawn extension (local, 2831234, 2) exited non-zero on 'Zap/69-1' -- Hungup 'Zap/69-1' == Spawn extension (local, 2831234, 2) exited non-zero on 'Zap/68-1' -- Hungup 'Zap/68-1'
RE: [Asterisk-Users] Asterisk Hylafax
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rémi Letot Sent: Monday, March 15, 2004 2:48 PM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Asterisk Hylafax Ignace CARIA [EMAIL PROTECTED] writes: Hi, I'd like to install ON THE SAME Machine, Asterisk and Hylafax. On http://www.voip-info.org/, I've found this: If you have an ISDN card supporting CAPI, there is a driver that connects the Hylafax wiki-Hylafax fax server directly to an Asterisk ISDN connection. (http://www.voip-info.org/wiki-Asterisk+and+faxes) Is somebody can help me to deploy both on the same machine (Asterisk is already running...impressive ;-) ) Don't know if it still applies, anyway here it is. I have * and hylafax running on the same machine. One extension is reserved for fax, the others are voice. I just configured chan_capi to manage all voice extensions, and capi4hylafax on the fax extension. Everything is fine, the capi layer isolates all those applications. couic -- Rémi aka hobbes ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users