[Asterisk-Users] debian sarge & zaptel 1.2 & TDM400P
I run debian sarge with kernel-image-2.6.8-2-686, compiled and installed zaptel 1.2rc2 without any problem. Modules can be loaded without problem. Also I have TDM04M or TDM card with 4 FXO modules. /etc/zaptel.conf contains, as mentioned in Asterisk. The Future of telephony: fxsks=1-4 loadzone=us defaultzone=us ztcfg -vv shows me: Zaptel Configuration == Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 4 channels configured. And connected my phone line to the TDM card, of cource RJ45. In Asterisk book: Now that the FXO channel is configured, let’s test it. Run the zttool application and connect your PSTN line to the FXO port on your TDM400P. Once you have a phone line connected to your FXO port, you can watch the card come out of a RED alarm. But nothing becomes red. Any suggestions? Please help and sorry for my poor english. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Dialing out with FXO
I got TDM card with 4 FXO ports. But I need to dial out? How I can do this? Is it possible? Please help ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Dialing out with FXO
[EMAIL PROTECTED] wrote: FXO ports are for dialling outunless you use them for dialling in. PaulH - Original Message - From: "Dulmandakh Sukhbaatar" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" Sent: Wednesday, November 16, 2005 5:57 PM Subject: [Asterisk-Users] Dialing out with FXO I got TDM card with 4 FXO ports. But I need to dial out? How I can do this? Is it possible? Please help ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users FXO seems only to receive voice call? Isn't it? http://www.digium.com/index.php?menu=fxsvfxo shows this. I have no FXS card. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TDM04b on FreeBSD
Jason Becker wrote: Alejandro Mejia Evertsz wrote: Hi list! I successfully installed a Digium TDM04B card on FreeBSD 5.4 using zaptel drivers for FreeBSD (installed with ports). I'm using Asterisk CVS-Head and the card works fine, but when placing or recieving a call on any of the 4 fxo ports, users hear (both sides) a "clicking" noise. I also have a Wildcard X100P installed, and uses the same configuration (on zapata.conf) but that card doesn't make that strange noise during conversations. Please let me know if someone had this problem before me, and what you did to correct it. I don't know what else to try. Could the TDM400P be sharing an interrupt? systat? Regards, use should write it to bsd ML. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Asterisk 1.2 + Debian Sarge
Tzafrir Cohen wrote: On Tue, Nov 22, 2005 at 02:00:11PM -0700, Matt wrote: Looks like you need to install the kernel headers package. While you are at it be sure that you have the kernel source package installed also. apt-get install kernel-headers-`uname -r` should suffice. my $0.02 Juanjo Portela wrote: Dear Collegues I am trying to compile the new version (Asterisk.1.2) with my debian box and i get the following error when i compile the zaptel package: radio:/usr/src/asterisk-1.2/zaptel-1.2.0# make make: Warning: File `Makefile' has modification time 3.1e+08 s in the future Hmmm... better setup your clock properly And you should create symlink to your kernel header ln -s kernel-headers-`uname -r` linux I had no problem with compilation. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] wcfxo loads correclty after issuing twice the command "ztcfg -vvvv" !!
Bukoka Budoka wrote: Hi to all, when i issue the ztcfg command for the first time i get the message "Changing signalling on channel 1 from Unused to FXS Kewlstart". When i issue it for the second time i get the normal message "1 channels configured." Has anyone any ideas of why not to have the normal behavior on the first place (i mean without passing from "Unused to FXS Kewlstart" and then to "1 channels configured." ??? --- [EMAIL PROTECTED] ~]# ztcfg -vvv Zaptel Configuration == Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. Changing signalling on channel 1 from Unused to FXS Kewlstart [EMAIL PROTECTED] ~]# ztcfg -vvv Zaptel Configuration == Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. My Zaptel is as follows: fxsks=1 loadzone=us defaultzone=us -- My zapata is as follows: [channels] context=outgoing ;switchtype=national signalling=fxs_ks ;rxwink=300 ; Atlas seems to use long (250ms) winks ;flash=1 usecallerid=no hidecallerid=yes callwaiting=no usecallingpres=no callwaitingcallerid=no threewaycalling=no transfer=no cancallforward=no callreturn=no echocancel=yes echotraining=yes echocancelwhenbridged=yes rxgain=3.0 txgain=-1.0 group=1 callgroup=1 pickupgroup=1 immediate=yes cidsignalling=bell channel => 1 The zaptel driver as well as the wcfxo driver is loaded in rc.local: modprobe zaptel modprobe wcfxo /sbin/ztcfg -v /usr/sbin/asterisk -vvv &> /var/log/asterisk/status-log & thank you all, Budoka. _ Don't just search. Find. Check out the new MSN Search! http://search.msn.com/ ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users If you run ztcfg first time after a new configuration, it will show first screen, specially when you change signalling configs. Afterward ztcfg will show second, until you make change. :D ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
