Re: [Asterisk-Users] Making a call using MGCP
Hi Florian! In my case, I will have the number ready to be dialed; the user won't dial digit by digit. I'll have to dial directly to a specific number (in this case 5220107) through media gateway. So, I won't have the NTFY messages... Thanks, Leonardo - Original Message - From: Florian Overkamp [EMAIL PROTECTED] To: 'Asterisk Users Mailing List - Non-Commercial Discussion' asterisk-users@lists.digium.com Sent: Monday, January 10, 2005 4:23 AM Subject: RE: [Asterisk-Users] Making a call using MGCP Hi, -Original Message- I have a question about CreateConnection (CRCX) at MGCP. For example, I have the phone number 5220107 and want to make a call for it using MGCP through a media gateway. How can I proceed? I know the command I must send to the media gateway should be like this: CRCX trans_id endpoint MGCP 1.0 C, L, M and X parameters SDP parameters My question is: where do I inform (which parameter) the number I want to call (5220107)?? MGCP sends each action and each digit separately: NTFY 11165 aaln/[EMAIL PROTECTED] MGCP 1.0 NCS 1.0 X: 725a06fb O: D/9 Where D/9 indicates the user pressing '9'. Best regards, Florian ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Making a call using MGCP
Sirs, I have a question about CreateConnection (CRCX) at MGCP. For example, I have the phone number 5220107 and want to make a call for it using MGCP through a media gateway. How can I proceed? I know the command I must send to the media gateway should be like this: CRCX trans_id endpoint MGCP 1.0 C, L, M and X parameters SDP parameters My question is: where do I inform (which parameter) the number I want to call (5220107)?? Thanks Leonardo ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Making a call using MGCP
Sirs, I have a question about CreateConnection (CRCX) at MGCP. For example, I have the phone number 5220107 and want to make a call for it using MGCP through a media gateway. How can I proceed? I know the command I must send to the media gateway should be like this: CRCX trans_id endpoint MGCP 1.0 C, L, M and X parameters SDP parameters My question is: where do I inform (which parameter) the number I want to call (5220107)?? Thanks Leonardo ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] MGCP phone
Does anyone know somefreeMGCP softphone? Nowadays I'm using one from eyeP Media, but it is trial for 30 days and it's expiring... Any ideas? Thanks, Leonardo ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] MGCP parameters
Sirs,
According to RFC 2705 (MGCP), these are the parameters that are used in the
transactions:
ReturnCode,
Connection-parameters
-- DeleteConnection(CallId,
EndpointId,
ConnectionId,
[Encapsulated NotificationRequest,]
[Encapsulated EndpointConfiguration])
ReturnCode,
-- DeleteConnection( CallId,
EndpointId,
ConnectionId,
Reason-code,
Connection-parameters)
ReturnCode,
-- DeleteConnection( CallId,
EndpointId)
ReturnCode,
-- DeleteConnection( EndpointId)
ReturnCode,
EndPointIdList|{
[RequestedEvents,]
[DigitMap,]
[SignalRequests,]
[RequestIdentifier,]
[NotifiedEntity,]
[ConnectionIdentifiers,]
[DetectEvents,]
[ObservedEvents,]
[EventStates,]
[BearerInformation,]
[RestartReason,]
[RestartDelay,]
[ReasonCode,]
[Capabilities]}
--- AuditEndPoint(EndpointId,
[RequestedInfo])
ReturnCode,
[CallId,]
[NotifiedEntity,]
[LocalConnectionOptions,]
[Mode,]
[RemoteConnectionDescriptor,]
[LocalConnectionDescriptor,]
[ConnectionParameters]
--- AuditConnection(EndpointId,
ConnectionId,
RequestedInfo)
ReturnCode,
[NotifiedEntity]
--- RestartInProgress ( EndPointId,
RestartMethod,
[RestartDelay,]
[Reason-code])
ReturnCode
-- EndpointConfiguration( EndpointId,
BearerInformation)
ReturnCode
-- NotificationRequest( EndpointId,
[NotifiedEntity,]
[RequestedEvents,]
RequestIdentifier,
[DigitMap,]
[SignalRequests,]
[QuarantineHandling,]
[DetectEvents,]
[encapsulated EndpointConfiguration])
ReturnCode
-- Notify( EndpointId,
[NotifiedEntity,]
RequestIdentifier,
ObservedEvents)
ReturnCode,
ConnectionId,
[SpecificEndPointId,]
[LocalConnectionDescriptor,]
[SecondEndPointId,]
[SecondConnectionId]
--- CreateConnection(CallId,
EndpointId,
[NotifiedEntity,]
[LocalConnectionOptions,]
Mode,
[{RemoteConnectionDescriptor |
SecondEndpointId}, ]
[Encapsulated NotificationRequest,]
[Encapsulated EndpointConfiguration])
ReturnCode,
[LocalConnectionDescriptor]
--- ModifyConnection(CallId,
EndpointId,
ConnectionId,
[NotifiedEntity,]
[LocalConnectionOptions,]
[Mode,]
[RemoteConnectionDescriptor,]
[Encapsulated NotificationRequest,]
[Encapsulated EndpointConfiguration])
My questions:
1) I am using Asterisk and a softphone called MGCP eyeP Phone. I was
watching the traffic between them at Ethereal and observed that some of them
have extra parameters. Example: CreateConnection has Request Identifier
(X), that is not described on RFC 2705. Should I ignore or consider it?
2) There are some parameters that don't have identifier? I mean, Request
Identifier is X:; Observed Events is O: ; Call ID is C: ... These
are them:
- Notified Entity
- Remote Connection Descriptor
- encapsulated Endpoint Configuration
- Second Endpoint Id
- encapsulated Notification Request
2.1) How can I identify them when they exist?
2.2) What means encapsulated parameters??
Thanks in advance,
Leonardo
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
[Asterisk-Users] MGCP Transaction identifiers
I know this is not the most appropriated list to this, but I will try: Does anyone know what is the criteria to the generation of the transaction identifiers in MGCP? I mean, are they generated by a randomic method? I'm using Asterisk and MGCP eyeP Phone and observed that the RSIP and NTFY (methods created by the gateway) use high values in the transaction identifiers, while the RQNT, AUEP, CRCX and DLCX (by the call agent)use low values for it. I hope I could explain my doubt! Here are some examples: RSIP 18696 aaln/[EMAIL PROTECTED] MGCP 1.0 RQNT 8 aaln/[EMAIL PROTECTED] MGCP 1.0 AUEP 9 aaln/[EMAIL PROTECTED] MGCP 1.0 RSIP 27232 aaln/[EMAIL PROTECTED] MGCP 1.0 RQNT 3 aaln/[EMAIL PROTECTED] MGCP 1.0 NTFY 27219 aaln/[EMAIL PROTECTED] MGCP 1.0 CRCX 2 aaln/[EMAIL PROTECTED] MGCP 1.0 DLCX 26 aaln/[EMAIL PROTECTED] MGCP 1.0 Thanks, Leonardo J. Tramontina ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Unable to create channel of type 'Zap' (cause 0)
No, I'm not in USA!! Besides this, my Asterisk is not making external calls; it is installed for some tests... I forgot to say... I'm making these tests in order to test the TE110P card we bought. Leonardo - Original Message - From: Steven Critchfield [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion [EMAIL PROTECTED] Sent: Friday, December 03, 2004 6:14 PM Subject: Re: [Asterisk-Users] Unable to create channel of type 'Zap' (cause 0) On Fri, 2004-12-03 at 16:39 -0300, Leonardo Tramontina wrote: Hi, I've created a test at extensions.conf like this with 3 steps: ; When dial , get the first available channel and dial do 482343400 exten = ,1,Dial(Zap/g1/482343400,5,rt) 482-343-400 Are you missing a number? Looks like it to me, well if you are in the US. -- Steven Critchfield [EMAIL PROTECTED] ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Unable to create channel of type 'Zap' (cause 0)
I don't think the problem is in the number of digits because, as I said, I'm not making a real call... I'm not redirecting to the real number 482343400 (my Asterisk is not connected to another network)... I just want to allocate one channel to test my TE110P!!! Leonardo - Original Message - From: Julio Arruda [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion [EMAIL PROTECTED] Sent: Friday, December 03, 2004 7:20 PM Subject: Re: [Asterisk-Users] Unable to create channel of type 'Zap' (cause 0) Remarks inline Leonardo J. Tramontina wrote: No, I'm not in USA!! Besides this, my Asterisk is not making external calls; it is installed for some tests... I forgot to say... I'm making these tests in order to test the TE110P card we bought. - Original Message - From: Steven Critchfield [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion [EMAIL PROTECTED] Sent: Friday, December 03, 2004 6:14 PM Subject: Re: [Asterisk-Users] Unable to create channel of type 'Zap' (cause 0) On Fri, 2004-12-03 at 16:39 -0300, Leonardo Tramontina wrote: Hi, I've created a test at extensions.conf like this with 3 steps: ; When dial , get the first available channel and dial do 482343400 exten = ,1,Dial(Zap/g1/482343400,5,rt) 482-343-400 Are you missing a number? Looks like it to me, well if you are in the US. Brazil, a DN has 8 digits. This way for quite some time. This would be a local dialed call, for a regular phone. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Unable to create channel of type 'Zap' (cause 0)
No, I don't have anything connected on the TE110P. After the Unable to create channel of type 'Zap' (cause 0) message, I also get the CHANUNAVAIL... Is not possible test a channel from the card without connections on it?? Leonardo - Original Message - From: Eric Wieling [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion [EMAIL PROTECTED] Sent: Friday, December 03, 2004 9:12 PM Subject: Re: [Asterisk-Users] Unable to create channel of type 'Zap' (cause 0) Leonardo J. Tramontina wrote: I don't think the problem is in the number of digits because, as I said, I'm not making a real call... I'm not redirecting to the real number 482343400 (my Asterisk is not connected to another network)... I just want to allocate one channel to test my TE110P!!! Do you have a T-1 or E-1 connected to the TE100P? If not Asterisk will give you a CHANUNAVAIL ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Asterisk+ MGCP
I meant the MGCP messages were not "happening", as
SIP were when a call happens... I can't watch them working... Did you understand
what is happening? Unfortunately I don't have a print-screen now, because all
the machines are in the company and now I'm at home. But I could get them on
Monday.
Thanks
Leonardo
- Original Message -
From:
Duane
Cox
To: Asterisk Users Mailing List -
Non-Commercial Discussion
Sent: Saturday, November 27, 2004 2:10
AM
Subject: Re: [Asterisk-Users] Asterisk+
MGCP
There are mgcp examples in
configs/mgcp.conf.sample in the source dir.
What do you mean by "...I found some problems
with the MGCP messages..."
You have to be more specific than that if you
would like help on the topic.
Duane Cox
- Original Message -----
From:
Leonardo J.
Tramontina
To: [EMAIL PROTECTED]
Sent: Friday, November 26, 2004 7:32
PM
Subject: [Asterisk-Users] Asterisk+
MGCP
Hi,
I have the following situation: I've installed
Asterisk at Machine 1 (M1 - IP: 192.168.1.145) and X-Lite
(X_lite-Xten-Win32-1103m.exe from www.xten.com) at Machine 2 (M2 - IP:
192.168.1.100) and Machine 3 (M3 - IP: 192.168.1.200).
I need to catch the SIP and MGCP messages that
will appear when M2 calls to M3 and vice versa.
The SIP messages are working (I don't have
problems with the config file), but I found some problems with the MGCP
messages. The "mgcp.conf" seems to be allright (also the "extensions.conf"),
but the messages are not working...
Does anyone have an example of "mgcp.conf" and
"extensions.conf"? Is there another file to config? And at X-Lite, is it
necessary setup something else?
Thanks in advance!
Leonardo J. Tramontina
___Asterisk-Users
mailing
list[EMAIL PROTECTED]http://lists.digium.com/mailman/listinfo/asterisk-usersTo
UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___Asterisk-Users
mailing
list[EMAIL PROTECTED]http://lists.digium.com/mailman/listinfo/asterisk-usersTo
UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Asterisk+ MGCP
Hi, I have the following situation: I've installed Asterisk at Machine 1 (M1 - IP: 192.168.1.145) and X-Lite (X_lite-Xten-Win32-1103m.exe from www.xten.com) at Machine 2 (M2 - IP: 192.168.1.100) and Machine 3 (M3 - IP: 192.168.1.200). I need to catch the SIP and MGCP messages that will appear when M2 calls to M3 and vice versa. The SIP messages are working (I don't have problems with the config file), but I found some problems with the MGCP messages. The "mgcp.conf" seems to be allright (also the "extensions.conf"), but the messages are not working... Does anyone have an example of "mgcp.conf" and "extensions.conf"? Is there another file to config? And at X-Lite, is it necessary setup something else? Thanks in advance! Leonardo J. Tramontina ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
