[Asterisk-Users] Want to record call and put into users voicemail

2006-03-01 Thread duane . pudenz 

We want to allow users to record calls,
have the recording go to the users voicemail box, and then email the user
with the recording.

We are running Asterisk 1.2

Best regards,

Duane Pudenz
Network Infrastructure Manager
Shasta Industries

o. 602.532.3706
c. 602.692.0304___
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

[Asterisk-Users] Calls not going through

2006-02-23 Thread duane . pudenz 

When a call is placed out the Zap interface there is a long pause followed
by an error message from the telco that the call can not be placed as
dialed.

We have a tdm2413e with 11 1FB (POTS) lines.  The number being dialed is a
working local number, all dialed numbers get the same error.

What should we be looking for ?


Best regards,

Duane Pudenz
Network Infrastructure Manager
Shasta Industries

___
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

RE : [Asterisk-Users] Asterisk start errors with TDM2413E

2006-02-20 Thread duane . pudenz 

I do not think so by reading the documentation
however I have changed the settings and still get the same error when starting
Asterisk

Best regards,

Duane Pudenz
Network Infrastructure Manager
Shasta Industries




- Message from [EMAIL PROTECTED] on Mon, 20 Feb 2006 07:08:05
+0100 -



To:
'Asterisk Users Mailing List - Non-Commercial
Discussion' asterisk-users@lists.digium.com


Subject:
RE : [Asterisk-Users] Asterisk start errors with TDM2413E
Hi,

I believe that you have inverted fxo_ks and
fxs_ks into your zapata.cong file signaling= declaration...
Invert and redo the tests.

Good Luck !
Francois BERGERET,
France.
-Message d'origine-
De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
De la part de [EMAIL PROTECTED]
Envoyé : lundi 20 février 2006 04:34
À : asterisk-users@lists.digium.com
Objet : [Asterisk-Users] Asterisk start errors with TDM2413E


I get the following errors when starting Asterisk.


== Parsing '/etc/asterisk/zapata.conf': Found

   Feb 19 21:14:35 WARNING[10440]: chan_zap.c:920 zt_open:
Unable to specify channel 1: No such device 
   Feb 19 21:14:35 ERROR[10440]: chan_zap.c:6860 mkintf: Unable
to open channel 1: No such device 
   here = 0, tmp-channel = 1, channel = 1

   Feb 19 21:14:35 ERROR[10440]: chan_zap.c:10264 setup_zap:
Unable to register channel '1' 
   Feb 19 21:14:35 WARNING[10440]: loader.c:414 __load_resource:
chan_zap.so: load_module failed, returning -1 
   Feb 19 21:14:35 WARNING[10440]: loader.c:554 load_modules:
Loading module chan_zap.so failed! 
   [EMAIL PROTECTED] ~]# Ouch ... error while writing audio
data: : Broken pipe 


Software versions 
   asterisk-1.2.3 
   asterisk-addons-1.2.1 
   asterisk-perl-0.08 
   asterisk-sounds-1.2.1 
   libpri-1.2.2 
   zaptel-1.2.4 


Output from modprobes 
   [EMAIL PROTECTED] asterisk]# modprobe -v zaptel

   insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/zaptel.ko


   [EMAIL PROTECTED] asterisk]# modprobe -v wctdm24xxp

   install /sbin/modprobe --ignore-install wctdm24xxp 
/sbin/ztcfg 
   insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/wctdm24xxp.ko


    This takes at least 10 seconds to come back to
a prompt  


ztcfg output 
   [EMAIL PROTECTED] asterisk]# ztcfg -vv


   Zaptel Configuration 
   == 

   Channel map: 

   Channel 01: FXO Kewlstart (Default) (Slaves: 01)

   Channel 02: FXO Kewlstart (Default) (Slaves: 02)

   Channel 03: FXO Kewlstart (Default) (Slaves: 03)

   Channel 04: FXO Kewlstart (Default) (Slaves: 04)

   Channel 05: FXS Kewlstart (Default) (Slaves: 05)

   Channel 06: FXS Kewlstart (Default) (Slaves: 06)

   Channel 07: FXS Kewlstart (Default) (Slaves: 07)

   Channel 08: FXS Kewlstart (Default) (Slaves: 08)

   Channel 09: FXS Kewlstart (Default) (Slaves: 09)

   Channel 10: FXS Kewlstart (Default) (Slaves: 10)

   Channel 11: FXS Kewlstart (Default) (Slaves: 11)

   Channel 12: FXS Kewlstart (Default) (Slaves: 12)

   Channel 13: FXS Kewlstart (Default) (Slaves: 13)

   Channel 14: FXS Kewlstart (Default) (Slaves: 14)

   Channel 15: FXS Kewlstart (Default) (Slaves: 15)

   Channel 16: FXS Kewlstart (Default) (Slaves: 16)


   16 channels configured. 


zaptel.conf 
   fxoks=1-4 
   fxsks=5-16 
   defaultzone=us 
   loadzone=us 


zapata.conf 
   [channels] 

   signalling=fxo_ks 
   echocancel=yes 
   echocancelwhenbridged=yes 
   usecallerid=yes 
   context=outstation 
   channel= 1-4 


   signalling=fxs_ks 
   echocancel=yes 
   echocancelwhenbridged=yes 
   usecallerid=yes 
   group=2 
   context=incomingpstn 
   channel= 5-16 


Best regards,

Duane Pudenz
Network Infrastructure Manager
Shasta Industries

___
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

RE : [Asterisk-Users] Asterisk start errors with TDM2413E

2006-02-20 Thread duane . pudenz 

Issue resolved, Thanks Digium!

The module slot closest to the bracket
that contains the connector is the last slot. I assumed that the
first slot would be at the bracket.

Silly user error, never assume.

Best regards,

Duane Pudenz
Network Infrastructure Manager
Shasta Industries

o. 602.532.3706
c. 602.692.0304

__

I do not think so by reading the documentation
however I have changed the settings and still get the same error when starting
Asterisk

Best regards,

Duane Pudenz
Network Infrastructure Manager
Shasta Industries




- Message from [EMAIL PROTECTED] on Mon, 20 Feb 2006 07:08:05
+0100 -



To:
'Asterisk Users Mailing List - Non-Commercial
Discussion' asterisk-users@lists.digium.com


Subject:
RE : [Asterisk-Users] Asterisk start errors with TDM2413E
Hi,

I believe that you have inverted fxo_ks and
fxs_ks into your zapata.cong file signaling= declaration...
Invert and redo the tests.

Good Luck !
Francois BERGERET,
France.
-Message d'origine-
De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
De la part de [EMAIL PROTECTED]
Envoyé : lundi 20 février 2006 04:34
À : asterisk-users@lists.digium.com
Objet : [Asterisk-Users] Asterisk start errors with TDM2413E


I get the following errors when starting Asterisk.


== Parsing '/etc/asterisk/zapata.conf': Found

   Feb 19 21:14:35 WARNING[10440]: chan_zap.c:920 zt_open:
Unable to specify channel 1: No such device 
   Feb 19 21:14:35 ERROR[10440]: chan_zap.c:6860 mkintf: Unable
to open channel 1: No such device 
   here = 0, tmp-channel = 1, channel = 1

   Feb 19 21:14:35 ERROR[10440]: chan_zap.c:10264 setup_zap:
Unable to register channel '1' 
   Feb 19 21:14:35 WARNING[10440]: loader.c:414 __load_resource:
chan_zap.so: load_module failed, returning -1 
   Feb 19 21:14:35 WARNING[10440]: loader.c:554 load_modules:
Loading module chan_zap.so failed! 
   [EMAIL PROTECTED] ~]# Ouch ... error while writing audio
data: : Broken pipe 


Software versions 
   asterisk-1.2.3 
   asterisk-addons-1.2.1 
   asterisk-perl-0.08 
   asterisk-sounds-1.2.1 
   libpri-1.2.2 
   zaptel-1.2.4 


Output from modprobes 
   [EMAIL PROTECTED] asterisk]# modprobe -v zaptel

   insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/zaptel.ko


   [EMAIL PROTECTED] asterisk]# modprobe -v wctdm24xxp

   install /sbin/modprobe --ignore-install wctdm24xxp 
/sbin/ztcfg 
   insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/wctdm24xxp.ko


    This takes at least 10 seconds to come back to
a prompt  


ztcfg output 
   [EMAIL PROTECTED] asterisk]# ztcfg -vv


   Zaptel Configuration 
   == 

   Channel map: 

   Channel 01: FXO Kewlstart (Default) (Slaves: 01)

   Channel 02: FXO Kewlstart (Default) (Slaves: 02)

   Channel 03: FXO Kewlstart (Default) (Slaves: 03)

   Channel 04: FXO Kewlstart (Default) (Slaves: 04)

   Channel 05: FXS Kewlstart (Default) (Slaves: 05)

   Channel 06: FXS Kewlstart (Default) (Slaves: 06)

   Channel 07: FXS Kewlstart (Default) (Slaves: 07)

   Channel 08: FXS Kewlstart (Default) (Slaves: 08)

   Channel 09: FXS Kewlstart (Default) (Slaves: 09)

   Channel 10: FXS Kewlstart (Default) (Slaves: 10)

   Channel 11: FXS Kewlstart (Default) (Slaves: 11)

   Channel 12: FXS Kewlstart (Default) (Slaves: 12)

   Channel 13: FXS Kewlstart (Default) (Slaves: 13)

   Channel 14: FXS Kewlstart (Default) (Slaves: 14)

   Channel 15: FXS Kewlstart (Default) (Slaves: 15)

   Channel 16: FXS Kewlstart (Default) (Slaves: 16)


   16 channels configured. 


zaptel.conf 
   fxoks=1-4 
   fxsks=5-16 
   defaultzone=us 
   loadzone=us 


zapata.conf 
   [channels] 

   signalling=fxo_ks 
   echocancel=yes 
   echocancelwhenbridged=yes 
   usecallerid=yes 
   context=outstation 
   channel= 1-4 


   signalling=fxs_ks 
   echocancel=yes 
   echocancelwhenbridged=yes 
   usecallerid=yes 
   group=2 
   context=incomingpstn 
   channel= 5-16 


Best regards,

Duane Pudenz
Network Infrastructure Manager
Shasta Industries

___
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

[Asterisk-Users] Asterisk start errors with TDM2413E

2006-02-19 Thread duane . pudenz 

I get the following errors when starting
Asterisk.

   == Parsing
'/etc/asterisk/zapata.conf': Found
  Feb 19 21:14:35
WARNING[10440]: chan_zap.c:920 zt_open: Unable to specify channel 1: No
such device
  Feb 19 21:14:35
ERROR[10440]: chan_zap.c:6860 mkintf: Unable to open channel 1: No such
device
  here = 0, tmp-channel
= 1, channel = 1
  Feb 19 21:14:35
ERROR[10440]: chan_zap.c:10264 setup_zap: Unable to register channel '1'
  Feb 19 21:14:35
WARNING[10440]: loader.c:414 __load_resource: chan_zap.so: load_module
failed, returning -1
  Feb 19 21:14:35
WARNING[10440]: loader.c:554 load_modules: Loading module chan_zap.so failed!
  [EMAIL PROTECTED]
~]# Ouch ... error while writing audio data: : Broken pipe


Software versions
  asterisk-1.2.3
  asterisk-addons-1.2.1
  asterisk-perl-0.08
  asterisk-sounds-1.2.1
  libpri-1.2.2
  zaptel-1.2.4


Output from modprobes
  [EMAIL PROTECTED]
asterisk]# modprobe -v zaptel
  insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/zaptel.ko

  [EMAIL PROTECTED]
asterisk]# modprobe -v wctdm24xxp
  install /sbin/modprobe
--ignore-install wctdm24xxp  /sbin/ztcfg
  insmod /lib/modules/2.6.14-1.1656_FC4smp/misc/wctdm24xxp.ko

   This
takes at least 10 seconds to come back to a prompt 


ztcfg output
  [EMAIL PROTECTED]
asterisk]# ztcfg -vv

  Zaptel Configuration
  ==

  Channel map:

  Channel 01: FXO
Kewlstart (Default) (Slaves: 01)
  Channel 02: FXO
Kewlstart (Default) (Slaves: 02)
  Channel 03: FXO
Kewlstart (Default) (Slaves: 03)
  Channel 04: FXO
Kewlstart (Default) (Slaves: 04)
  Channel 05: FXS
Kewlstart (Default) (Slaves: 05)
  Channel 06: FXS
Kewlstart (Default) (Slaves: 06)
  Channel 07: FXS
Kewlstart (Default) (Slaves: 07)
  Channel 08: FXS
Kewlstart (Default) (Slaves: 08)
  Channel 09: FXS
Kewlstart (Default) (Slaves: 09)
  Channel 10: FXS
Kewlstart (Default) (Slaves: 10)
  Channel 11: FXS
Kewlstart (Default) (Slaves: 11)
  Channel 12: FXS
Kewlstart (Default) (Slaves: 12)
  Channel 13: FXS
Kewlstart (Default) (Slaves: 13)
  Channel 14: FXS
Kewlstart (Default) (Slaves: 14)
  Channel 15: FXS
Kewlstart (Default) (Slaves: 15)
  Channel 16: FXS
Kewlstart (Default) (Slaves: 16)

  16 channels configured.


zaptel.conf
  fxoks=1-4
  fxsks=5-16
  defaultzone=us
  loadzone=us


zapata.conf
  [channels]

  signalling=fxo_ks
  echocancel=yes
  echocancelwhenbridged=yes
  usecallerid=yes
  context=outstation
  channel= 1-4


  signalling=fxs_ks
  echocancel=yes
  echocancelwhenbridged=yes
  usecallerid=yes
  group=2
  context=incomingpstn
  channel= 5-16


Best regards,

Duane Pudenz
Network Infrastructure Manager
Shasta Industries___
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users