Re: [asterisk-users] Asterisk server hangs on after only few hours again.
johnny_xing wrote: hi, everyone, i have been sufferred for the asterisk hang on problem for so long and i just reinstalled the whole thing yesterday, but again this morning the server hangs on again, you could not call in through PSTN line and the ppl also could not call out throught the server, there is simply engaged dial tone when you try to do so. and the only thing i can do is to restart asterisk server after some hours or one day. i am using asterisk 1.2.17 + zaptel 1.2.16 + freepbx 2.2.1. Any one please give me some advice on this? thanks so much really, or how I can monitor and debug the problems when I happened again next time. My guess would be that you have a hardware issue. Either a bad piece of hardware or a hardware compatibility issue. Check the output of "cat /proc/interrupts" to make sure you don't have any IRQ sharing. I have personally not had good luck with Digium analog cards, but most people seem to use then without issue. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Asterisk server hangs on after only few hours again.
hi, everyone, i have been sufferred for the asterisk hang on problem for so long and i just reinstalled the whole thing yesterday, but again this morning the server hangs on again, you could not call in through PSTN line and the ppl also could not call out throught the server, there is simply engaged dial tone when you try to do so. and the only thing i can do is to restart asterisk server after some hours or one day. i am using asterisk 1.2.17 + zaptel 1.2.16 + freepbx 2.2.1. [EMAIL PROTECTED] ~]# tail /var/log/asterisk/full Apr 5 09:38:17 DEBUG[6351] manager.c: Manager received command 'Command' Apr 5 09:38:17 DEBUG[6351] manager.c: Manager received command 'Command' Apr 5 09:38:17 DEBUG[6351] manager.c: Manager received command 'Command' Apr 5 09:38:31 DEBUG[6305] chan_sip.c: Stopping retransmission on '293c2fcd70fb [EMAIL PROTECTED] ' of Request 102: Match Found Apr 5 09:38:32 DEBUG[6299] chan_iax2.c: Peer lastms 286, historicms 286, maxms 2000 Apr 5 09:38:34 VERBOSE[6262] logger.c: -- Remote UNIX connection Apr 5 09:38:34 VERBOSE[8867] logger.c: -- Remote UNIX connection disconnect ed Apr 5 09:38:35 DEBUG[6305] chan_sip.c: Stopping retransmission on '777d42677b83 [EMAIL PROTECTED] ' of Request 102: Match Found Apr 5 09:38:37 DEBUG[6305] chan_sip.c: Stopping retransmission on '03d3c07e09b3 [EMAIL PROTECTED] ' of Request 102: Match Found Apr 5 09:38:37 DEBUG[6305] chan_sip.c: Stopping retransmission on '525fcce86064 Any one please give me some advice on this? thanks so much really, or how I can monitor and debug the problems when I happened again next time. Best Regards, Johnny ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Asterisk Server Hangs
whats kernel version ? check in "dmesg" for system messagesCheers,Giovanni Miano2005/12/29, Dushyanth Harinath <[EMAIL PROTECTED] >:Hey guys,Asterisk Server Specs :Asterisk version :CLI> show version Asterisk SVN-trunk-r7230 built by [EMAIL PROTECTED] on a i686 running Linuxon 2005-12-25 16:14:47 UTCSystem details :Centos 4.2 (Final)Linux ip-pbx 2.6.9-22.ELsmp #1 SMPIntel Dual Xeon 3.06Ghz Intel SE7501CW2 MotherboardDigium cards : T110P (E1) , TDM22B, TDM31B, TDM24012BI added TDM24012B yes'day but haven't configured or used it yet. Itsjust connected to the system. The same problem used to occur before adding TDM24012B to the mix.This setup hangs up i,e total freeze cant ssh, cant login even from thesystem console and nothing in system logs or asterisk logs point me toany obvious problem. There is no coredump in /tmp too. Asterisk also freezes up the server when i issue a stop now command inthe CLI sometimes.The only call traffic at this moment are SIP to SIP internal calls, SIPto ZAP external calls and ZAP to SIP incoming calls. In all there must be a total of 10 simultaneous calls.Im using queues, rxfax, txfax, voicemail, meetme (still testing).This happens three or four times in a day.I cant see any IRQ misses in zttool and zttest output is below. Opened pseudo zap interface, measuring accuracy...99.987793% 99.987793% 99.987793% 99.987793% 100.00% 100.00%99.987793%99.987793% 100.00% 100.00% 100.00% 99.987793% 100.00%99.987793% 100.00%Best: 100.00 -- Worst: 99.987793 -- Average: 99.992300Found the below messages in dmesg but seems informational rather than aerror.Dec 27 22:04:24 asterisk kernel: zaptel Disabled echo canceller because of tone (tx) on channel 32Dec 29 21:02:12 asterisk kernel: zaptel Disabled echo canceller becauseof tone (rx) on channel 35I dont know what the problem could be. I followed the doc at http://www.voip-info.org/wiki-Asterisk+debugging and started asteriskusing safe_asterisk and applied the logger related changes.Wat else i can do to debug this issue ?Dushyanth___ --Bandwidth and Colocation provided by Easynews.com --Asterisk-Users mailing listTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users-- Giovanni Miano ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Asterisk Server Hangs
Hey guys, Asterisk Server Specs : Asterisk version : CLI> show version Asterisk SVN-trunk-r7230 built by [EMAIL PROTECTED] on a i686 running Linux on 2005-12-25 16:14:47 UTC System details : Centos 4.2 (Final) Linux ip-pbx 2.6.9-22.ELsmp #1 SMP Intel Dual Xeon 3.06Ghz Intel SE7501CW2 Motherboard Digium cards : T110P (E1) , TDM22B, TDM31B, TDM24012B I added TDM24012B yes'day but haven't configured or used it yet. Its just connected to the system. The same problem used to occur before adding TDM24012B to the mix. This setup hangs up i,e total freeze cant ssh, cant login even from the system console and nothing in system logs or asterisk logs point me to any obvious problem. There is no coredump in /tmp too. Asterisk also freezes up the server when i issue a stop now command in the CLI sometimes. The only call traffic at this moment are SIP to SIP internal calls, SIP to ZAP external calls and ZAP to SIP incoming calls. In all there must be a total of 10 simultaneous calls. Im using queues, rxfax, txfax, voicemail, meetme (still testing). This happens three or four times in a day. I cant see any IRQ misses in zttool and zttest output is below. Opened pseudo zap interface, measuring accuracy... 99.987793% 99.987793% 99.987793% 99.987793% 100.00% 100.00% 99.987793% 99.987793% 100.00% 100.00% 100.00% 99.987793% 100.00% 99.987793% 100.00% Best: 100.00 -- Worst: 99.987793 -- Average: 99.992300 Found the below messages in dmesg but seems informational rather than a error. Dec 27 22:04:24 asterisk kernel: zaptel Disabled echo canceller because of tone (tx) on channel 32 Dec 29 21:02:12 asterisk kernel: zaptel Disabled echo canceller because of tone (rx) on channel 35 I dont know what the problem could be. I followed the doc at http://www.voip-info.org/wiki-Asterisk+debugging and started asterisk using safe_asterisk and applied the logger related changes. Wat else i can do to debug this issue ? Dushyanth ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users