Re: [Asterisk-Users] Detect alternate line in Broadvoice inbound context
Just as a followup, you need to be a bit careful and test this out if
you make any changes to your Broadvoice account. I added a second
virtual number and they switched the number that was previously
specifying a distinctive ring of Bellcore-dr3 to Bellcore-dr4. The last
number added now specifies Bellcore-dr3. Sending the number would be so
much more reliable...
MARK.
Mark Hulber wrote:
Ok, your solution does work but in looking at my console output I saw
that SIPGetHeader was deprecated for the new dialplan function
SIP_HEADER. Below is my modification. You don't need a priority+101.
exten => 212999,1,Set(Var_Alert=${SIP_HEADER(Alert-Info)})
exten => 212999,n,GotoIf($["${Var_Alert}" =
""]?x-916999,1:x-212999,1)
In this case, the 212 number is the primary number.
Thanks,
MARK.
Samy Antoun wrote:
Mark,
1. Make sure that SIPGetHeader application is registered
CLI> show application SIPGetHeader
if it is registered you'll get
-= Info about application 'SIPGetHeader' =-
[Synopsis]
Get a SIP header from an incoming call
[Description]
SIPGetHeader(var=headername):
Sets a channel variable to the content of a SIP header
Skips to priority+101 if header does not exist
Otherwise returns 0
If not,
Your application(s) is (are) not registered
If the application is not registered, I can't recommend anything for
you, I had an Asterisk system with ver 1.0 (no SIPGetHeader) and I
tried to patch it with any of the following with no luck:
http://bugs.digium.com/bug_view_page.php?bug_id=0002838
http://bugs.digium.com/view.php?id=2924
If you have it registered, here is a sample of my setup:
[bvdr]
exten => s,1,Answer exten => s,2,DigitTimeout(5) exten =>
s,3,ResponseTimeout(10) exten =>
s,4,SIPGetHeader(Var_Alert=Alert-Info) exten =>
s,5,GotoIf($["${Var_Alert}" =
""]?ext-local,320,1) exten =>
s,6,Goto(ext-local,200,1)
This setup for ONE Distinctive Ring only (Bellcore-dr3), if you have
more than one, you can use "sip debug" to retrieve the header
information
The BEST reference for this subject is:
http://voxilla.com/PNphpBB2-viewtopic-t-3935-highlight-dring1.html
Hope this helps
__ Start your day with Yahoo! - Make
it your home page! http://www.yahoo.com/r/hs
__ Yahoo! Mail - PC Magazine Editors'
Choice 2005 http://mail.yahoo.com
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Detect alternate line in Broadvoice inbound context
Ok, your solution does work but in looking at my console output I saw that
SIPGetHeader was deprecated for the new dialplan function SIP_HEADER. Below is
my modification. You don't need a priority+101.
exten => 212999,1,Set(Var_Alert=${SIP_HEADER(Alert-Info)})
exten => 212999,n,GotoIf($["${Var_Alert}" =
""]?x-916999,1:x-212999,1)
In this case, the 212 number is the primary number.
Thanks,
MARK.
Samy Antoun wrote:
Mark,
1. Make sure that SIPGetHeader application is registered
CLI> show application SIPGetHeader
if it is registered you'll get
-= Info about application 'SIPGetHeader' =-
[Synopsis]
Get a SIP header from an incoming call
[Description]
SIPGetHeader(var=headername):
Sets a channel variable to the content of a SIP header
Skips to priority+101 if header does not exist
Otherwise returns 0
If not,
Your application(s) is (are) not registered
If the application is not registered, I can't recommend anything for
you, I had an Asterisk system with ver 1.0 (no SIPGetHeader) and I
tried to patch it with any of the following with no luck:
http://bugs.digium.com/bug_view_page.php?bug_id=0002838
http://bugs.digium.com/view.php?id=2924
If you have it registered, here is a sample of my setup:
[bvdr]
exten => s,1,Answer
exten => s,2,DigitTimeout(5)
exten => s,3,ResponseTimeout(10)
exten => s,4,SIPGetHeader(Var_Alert=Alert-Info)
exten => s,5,GotoIf($["${Var_Alert}" =
""]?ext-local,320,1)
exten => s,6,Goto(ext-local,200,1)
This setup for ONE Distinctive Ring only (Bellcore-dr3), if you have
more than one, you can use "sip debug" to retrieve the header
information
The BEST reference for this subject is:
http://voxilla.com/PNphpBB2-viewtopic-t-3935-highlight-dring1.html
Hope this helps
__
Start your day with Yahoo! - Make it your home page!
http://www.yahoo.com/r/hs
__
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Detect alternate line in Broadvoice inbound context
Mark,
1. Make sure that SIPGetHeader application is registered
CLI> show application SIPGetHeader
if it is registered you'll get
-= Info about application 'SIPGetHeader' =-
[Synopsis]
Get a SIP header from an incoming call
[Description]
SIPGetHeader(var=headername):
Sets a channel variable to the content of a SIP header
Skips to priority+101 if header does not exist
Otherwise returns 0
If not,
Your application(s) is (are) not registered
If the application is not registered, I can't recommend anything for
you, I had an Asterisk system with ver 1.0 (no SIPGetHeader) and I
tried to patch it with any of the following with no luck:
http://bugs.digium.com/bug_view_page.php?bug_id=0002838
http://bugs.digium.com/view.php?id=2924
If you have it registered, here is a sample of my setup:
[bvdr]
exten => s,1,Answer
exten => s,2,DigitTimeout(5)
exten => s,3,ResponseTimeout(10)
exten => s,4,SIPGetHeader(Var_Alert=Alert-Info)
exten => s,5,GotoIf($["${Var_Alert}" =
""]?ext-local,320,1)
exten => s,6,Goto(ext-local,200,1)
This setup for ONE Distinctive Ring only (Bellcore-dr3), if you have
more than one, you can use "sip debug" to retrieve the header
information
The BEST reference for this subject is:
http://voxilla.com/PNphpBB2-viewtopic-t-3935-highlight-dring1.html
Hope this helps
__
Start your day with Yahoo! - Make it your home page!
http://www.yahoo.com/r/hs
__
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Detect alternate line in Broadvoice inbound context
There was a patch for chan_sip a while back that broke out what context a call rang into based on the distinctive ring information that was sent by the peer. This is what I use to distinguish different dialed numbers from them. On 11/21/05, Mark Hulber <[EMAIL PROTECTED]> wrote: > I have a single Broadvoice account with more than one number. I am > trying to distinguish between the numbers on an inbound call. I have > already tried using different incoming extensions that match each number > but it always defaults to the primary. Someone earlier mentioned > SIPGetHeader as a possible solution but I'm not sure how that would > work. The only field that might possibly contain the distinctive number > that I can tell is "list_route" but I have never used SIPGetHeader and > don't know if it even makes sense in this case. > > Does anyone have a solution for this? I also tried DNID with no luck. > > MARK. > ___ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > -- Bird's The Word Technologies, Inc. http://www.btwtech.com/ ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Detect alternate line in Broadvoice inbound context
I have a single Broadvoice account with more than one number. I am trying to distinguish between the numbers on an inbound call. I have already tried using different incoming extensions that match each number but it always defaults to the primary. Someone earlier mentioned SIPGetHeader as a possible solution but I'm not sure how that would work. The only field that might possibly contain the distinctive number that I can tell is "list_route" but I have never used SIPGetHeader and don't know if it even makes sense in this case. Does anyone have a solution for this? I also tried DNID with no luck. MARK. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
