[Asterisk-Users] error starting asterisk
Just upgraded to the current stable ver. when I start asterisk with -vcg I get the following error [pbx_loopback.so]Dec 23 19:25:33 WARNING[1633]: loader.c:258 ast_load_resource: /usr/lib/asterisk/modules/pbx_loopback.so: undefined symbol: pbx_substitute_variables_varshead Dec 23 19:25:33 WARNING[1633]: loader.c:440 load_modules: Loading module pbx_loopback.so failed! Asterisk CVS-v1-0-12/23/04-18:34:44 -Thanks Tim ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] error starting asterisk
Tim Lewis wrote: Just upgraded to the current stable ver. when I start asterisk with -vcg I get the following error [pbx_loopback.so]Dec 23 19:25:33 WARNING[1633]: loader.c:258 ast_load_resource: /usr/lib/asterisk/modules/pbx_loopback.so: undefined symbol: pbx_substitute_variables_varshead Dec 23 19:25:33 WARNING[1633]: loader.c:440 load_modules: Loading module pbx_loopback.so failed! When you downgrade from CVS-HEAD to 1.0.x CVS stable you have to remove the modules that are in CVS-HEAD, but not in 1.0.x CVS stable. Either that or you didn't remove the Asterisk source dir (and Zaptel source dir, and LibPRI source dir) before you downloaded the 1.0.x CVS. --Eric ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] error starting asterisk
[EMAIL PROTECTED] wrote: Tim Lewis wrote: Just upgraded to the current stable ver. when I start asterisk with -vcg I get the following error [pbx_loopback.so]Dec 23 19:25:33 WARNING[1633]: loader.c:258 ast_load_resource: /usr/lib/asterisk/modules/pbx_loopback.so: undefined symbol: pbx_substitute_variables_varshead Dec 23 19:25:33 WARNING[1633]: loader.c:440 load_modules: Loading module pbx_loopback.so failed! When you downgrade from CVS-HEAD to 1.0.x CVS stable you have to remove the modules that are in CVS-HEAD, but not in 1.0.x CVS stable. Either that or you didn't remove the Asterisk source dir (and Zaptel source dir, and LibPRI source dir) before you downloaded the 1.0.x CVS. I had the exact same problem, but was in the process of trying to figure it out myself. I did remove the Asterisk source directory before downloading the stable version. How do I remove the modules that are in CVS-HEAD? What's the best way to do clean up everything and do a fresh install of Asterisk stable? -- Nabeel Jafferali tel: 647.722.8457 x201 718.606.4190 x201 fwd: 46990 x201 email/msn: nabeelatjafferali.net smime.p7s Description: S/MIME cryptographic signature ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] error starting asterisk
Jeff remove the following directory /usr/lib/asterisk/modules/ On Thu, 2004-12-23 at 21:01, Nabeel Jafferali wrote: [EMAIL PROTECTED] wrote: Tim Lewis wrote: Just upgraded to the current stable ver. when I start asterisk with -vcg I get the following error [pbx_loopback.so]Dec 23 19:25:33 WARNING[1633]: loader.c:258 ast_load_resource: /usr/lib/asterisk/modules/pbx_loopback.so: undefined symbol: pbx_substitute_variables_varshead Dec 23 19:25:33 WARNING[1633]: loader.c:440 load_modules: Loading module pbx_loopback.so failed! When you downgrade from CVS-HEAD to 1.0.x CVS stable you have to remove the modules that are in CVS-HEAD, but not in 1.0.x CVS stable. Either that or you didn't remove the Asterisk source dir (and Zaptel source dir, and LibPRI source dir) before you downloaded the 1.0.x CVS. I had the exact same problem, but was in the process of trying to figure it out myself. I did remove the Asterisk source directory before downloading the stable version. How do I remove the modules that are in CVS-HEAD? What's the best way to do clean up everything and do a fresh install of Asterisk stable? ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] error starting asterisk
Nabeel Jafferali wrote: I had the exact same problem, but was in the process of trying to figure it out myself. I did remove the Asterisk source directory before downloading the stable version. How do I remove the modules that are in CVS-HEAD? As long as you are only using the stock modules that come with Aterisk you can just rm everything in /usr/lib/asterisk/modules --Eric ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Error starting Asterisk.
L.S., I have a Pentium 800Mhz with 394MB memory, 80GB HD and FreeBSD installed on it. I installed Asterisk with the "ports-collection" of FreeBSD. When I start Asterisk, it gives the following error: Hostname kernel: pid 11802 (asterisk), uid 0: exited on signal 11 (core dumped). When I issue the command asterisk -c I can see only a warning for file chan_oss.c: I don't work right with non-full duplex sounds cards Does anybody have a hunch? If necessary I can ofcourse provide the full output of asterisk -c... Thanks in advance Oscar ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Error starting Asterisk.
On Mon, 25 Oct 2004 20:32:51 +0200, Oscar Bults [EMAIL PROTECTED] wrote: When I issue the command asterisk -c I can see only a warning for file chan_oss.c: I don't work right with non-full duplex sounds cards try noload = chan_oss.so in /etc/asterisk/modules.conf and see if it works without OSS. rgds benjk -- Sunrise Telephone Systems, 9F Shibuya Daikyo Bldg., 1-13-5 Shibuya, Tokyo, Japan. NB: Spam filters in place. Messages unrelated to the * mailing lists may get trashed. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Error starting Asterisk.
The warning is gone, but asterisk still exits with the same error. Thanks for taking the effort though ;-) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Benjamin on Asterisk Mailing Lists Sent: Monday, October 25, 2004 8:48 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Error starting Asterisk. On Mon, 25 Oct 2004 20:32:51 +0200, Oscar Bults [EMAIL PROTECTED] wrote: When I issue the command asterisk -c I can see only a warning for file chan_oss.c: I don't work right with non-full duplex sounds cards try noload = chan_oss.so in /etc/asterisk/modules.conf and see if it works without OSS. rgds benjk -- Sunrise Telephone Systems, 9F Shibuya Daikyo Bldg., 1-13-5 Shibuya, Tokyo, Japan. NB: Spam filters in place. Messages unrelated to the * mailing lists may get trashed. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Error starting Asterisk.
On Mon, 25 Oct 2004 20:32:51 +0200, Oscar Bults [EMAIL PROTECTED] wrote: I can see only a warning for file chan_oss.c: I don't work right with non-full duplex sounds cards Does anybody have a hunch? If necessary I can ofcourse provide the full output of asterisk -c... I've never installed on FreeBSD, but I'm going throw a wild guess out there. In modules.conf, try disabling the chan_alsa and chan_oss drivers. noload = chan_alsa.so noload = chan_oss.so I didn't verify the above config as I am just trying to remember, but I'm pretty sure thats right :) Give that a shot and see if you get an difference. HTH, Leif Madsen. http://www.asteriskdocs.org ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Error starting Asterisk.
Hiya Leif, Noload = chan_alsa.so is a standard setting Noload = chan_oss.so makes the warning go away but asterisk still exits with the same error.. Thanks for trying to help me ;-) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leif Madsen Sent: Monday, October 25, 2004 8:52 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Error starting Asterisk. On Mon, 25 Oct 2004 20:32:51 +0200, Oscar Bults [EMAIL PROTECTED] wrote: I can see only a warning for file chan_oss.c: I don't work right with non-full duplex sounds cards Does anybody have a hunch? If necessary I can ofcourse provide the full output of asterisk -c... I've never installed on FreeBSD, but I'm going throw a wild guess out there. In modules.conf, try disabling the chan_alsa and chan_oss drivers. noload = chan_alsa.so noload = chan_oss.so I didn't verify the above config as I am just trying to remember, but I'm pretty sure thats right :) Give that a shot and see if you get an difference. HTH, Leif Madsen. http://www.asteriskdocs.org ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Error starting Asterisk.
On Mon, 2004-10-25 at 15:16, Oscar Bults wrote: The warning is gone, but asterisk still exits with the same error. Thanks for taking the effort though ;-) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Benjamin on Asterisk Mailing Lists Sent: Monday, October 25, 2004 8:48 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Error starting Asterisk. On Mon, 25 Oct 2004 20:32:51 +0200, Oscar Bults [EMAIL PROTECTED] wrote: When I issue the command asterisk -c I can see only a warning for file chan_oss.c: I don't work right with non-full duplex sounds cards try noload = chan_oss.so in /etc/asterisk/modules.conf and see if it works without OSS. rgds benjk Start up Asterisk with a 'g' option so it will do a core dump when it crashes. (i.e. asterisk -gc) Then you can load the core dump into gdb and get a backtrace to see exactly where it is failing. -Seth -- Seth Remington SaberLogic, LLC 661-B Weber Drive Wadsworth, Ohio 44281 Phone: (330)335-6442 Fax: (330)336-8559 ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Error starting Asterisk.
..I got the coredump, I got gdb, I can issue commands at the gdb-cli. But I have no idea how to do a backtrace... Thanks though (I hoped this was a somewhat known error) for your effort -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Seth Remington Sent: Monday, October 25, 2004 9:53 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Error starting Asterisk. On Mon, 2004-10-25 at 15:16, Oscar Bults wrote: The warning is gone, but asterisk still exits with the same error. Thanks for taking the effort though ;-) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Benjamin on Asterisk Mailing Lists Sent: Monday, October 25, 2004 8:48 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Error starting Asterisk. On Mon, 25 Oct 2004 20:32:51 +0200, Oscar Bults [EMAIL PROTECTED] wrote: When I issue the command asterisk -c I can see only a warning for file chan_oss.c: I don't work right with non-full duplex sounds cards try noload = chan_oss.so in /etc/asterisk/modules.conf and see if it works without OSS. rgds benjk Start up Asterisk with a 'g' option so it will do a core dump when it crashes. (i.e. asterisk -gc) Then you can load the core dump into gdb and get a backtrace to see exactly where it is failing. -Seth -- Seth Remington SaberLogic, LLC 661-B Weber Drive Wadsworth, Ohio 44281 Phone: (330)335-6442 Fax: (330)336-8559 ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Error starting Asterisk.
bt should do it. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Oscar Bults Sent: Monday, October 25, 2004 2:14 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Error starting Asterisk. ..I got the coredump, I got gdb, I can issue commands at the gdb-cli. But I have no idea how to do a backtrace... Thanks though (I hoped this was a somewhat known error) for your effort -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Seth Remington Sent: Monday, October 25, 2004 9:53 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Error starting Asterisk. On Mon, 2004-10-25 at 15:16, Oscar Bults wrote: The warning is gone, but asterisk still exits with the same error. Thanks for taking the effort though ;-) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Benjamin on Asterisk Mailing Lists Sent: Monday, October 25, 2004 8:48 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Error starting Asterisk. On Mon, 25 Oct 2004 20:32:51 +0200, Oscar Bults [EMAIL PROTECTED] wrote: When I issue the command asterisk -c I can see only a warning for file chan_oss.c: I don't work right with non-full duplex sounds cards try noload = chan_oss.so in /etc/asterisk/modules.conf and see if it works without OSS. rgds benjk Start up Asterisk with a 'g' option so it will do a core dump when it crashes. (i.e. asterisk -gc) Then you can load the core dump into gdb and get a backtrace to see exactly where it is failing. -Seth -- Seth Remington SaberLogic, LLC 661-B Weber Drive Wadsworth, Ohio 44281 Phone: (330)335-6442 Fax: (330)336-8559 ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Error starting Asterisk/SOLVED
OK, this is the output of the backtrace #0 0x2952ef53 in unpack_huff () from /usr/local/lib/asterisk/modules/codec_mp3_d.so #1 0x295213bb in cup3_init () from /usr/local/lib/asterisk/modules/codec_mp3_d.so #2 0x2951f7b3 in L3audio_decode_MPEG1 () from /usr/local/lib/asterisk/modules/codec_mp3_d.so #3 0x2951f640 in L3audio_decode () from /usr/local/lib/asterisk/modules/codec_mp3_d.so #4 0x29519ef0 in audio_decode () from /usr/local/lib/asterisk/modules/codec_mp3_d.so #5 0x29519c52 in _init () from /usr/local/lib/asterisk/modules/codec_mp3_d.so #6 0x0805abd9 in ast_translate () #7 0x0805af39 in ast_register_translator () #8 0x29519e32 in load_module () from /usr/local/lib/asterisk/modules/codec_mp3_d.so #9 0x080538cf in ast_load_resource () #10 0x08053d70 in load_modules () #11 0x0807b554 in main () #12 0x0804fb42 in _start () So I added Noload=codec_mp3_d.so to modules.conf Asterisk is now running but I have not yet found out what the impact isSeems to me that this has something to do with the soundcard giving a warning. If someone knows what this module does please let me know? Thanks to all for their hints and suggestions. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Giagnocavo Sent: Monday, October 25, 2004 10:21 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Error starting Asterisk. bt should do it. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Oscar Bults Sent: Monday, October 25, 2004 2:14 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Error starting Asterisk. ..I got the coredump, I got gdb, I can issue commands at the gdb-cli. But I have no idea how to do a backtrace... Thanks though (I hoped this was a somewhat known error) for your effort -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Seth Remington Sent: Monday, October 25, 2004 9:53 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Error starting Asterisk. On Mon, 2004-10-25 at 15:16, Oscar Bults wrote: The warning is gone, but asterisk still exits with the same error. Thanks for taking the effort though ;-) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Benjamin on Asterisk Mailing Lists Sent: Monday, October 25, 2004 8:48 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Error starting Asterisk. On Mon, 25 Oct 2004 20:32:51 +0200, Oscar Bults [EMAIL PROTECTED] wrote: When I issue the command asterisk -c I can see only a warning for file chan_oss.c: I don't work right with non-full duplex sounds cards try noload = chan_oss.so in /etc/asterisk/modules.conf and see if it works without OSS. rgds benjk Start up Asterisk with a 'g' option so it will do a core dump when it crashes. (i.e. asterisk -gc) Then you can load the core dump into gdb and get a backtrace to see exactly where it is failing. -Seth -- Seth Remington SaberLogic, LLC 661-B Weber Drive Wadsworth, Ohio 44281 Phone: (330)335-6442 Fax: (330)336-8559 ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Error starting
Simon Brown wrote: I have just downloaded V1.0 from CVS and when I try to start Asterisk (after compiling and installing) I get this error: Oct 11 15:51:29 ERROR[1076241024]: chan_zap.c:6205 mkintf: Unable to get parameters Oct 11 15:51:29 ERROR[1076241024]: chan_zap.c:9134 setup_zap: Unable to register channel '2' Oct 11 15:51:29 WARNING[1076241024]: loader.c:334 ast_load_resource: chan_zap.so: load_module failed, returning -1 == Unregistered channel type 'Tor' == Unregistered channel type 'Zap' Oct 11 15:51:29 WARNING[1076241024]: loader.c:429 load_modules: Loading module chan_zap.so failed! Does anyone have any ideas what is wrong? Did you upgrade to V1.0, or is this a brand-new installation? New install: Do you have any digium cards on the machine? If not then that's probably why it's throwing up the 'Loading module chan_zap.so failed' error. If you're going to run the * box without any of the digium cards then you need to add noload = chan_zap.so in /etc/asterisk/modules.conf New install, have digium card: Perhaps your box isn't recognizing the card due to an IRQ issue? run the dmesg command and make sure there's something in the output that shows your box recognizes the existence of the card. Perhaps posting a bit more information about your setup might help. Cheers Flynn ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Error starting
I have been running Asterisk happily for many months and I was trying to upgrade from CVS-HEAD-08/13/04-10 Simon Brown -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of el Flynn Sent: Monday, 11 October 2004 16:09 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Error starting Simon Brown wrote: I have just downloaded V1.0 from CVS and when I try to start Asterisk (after compiling and installing) I get this error: Oct 11 15:51:29 ERROR[1076241024]: chan_zap.c:6205 mkintf: Unable to get parameters Oct 11 15:51:29 ERROR[1076241024]: chan_zap.c:9134 setup_zap: Unable to register channel '2' Oct 11 15:51:29 WARNING[1076241024]: loader.c:334 ast_load_resource: chan_zap.so: load_module failed, returning -1 == Unregistered channel type 'Tor' == Unregistered channel type 'Zap' Oct 11 15:51:29 WARNING[1076241024]: loader.c:429 load_modules: Loading module chan_zap.so failed! Does anyone have any ideas what is wrong? Did you upgrade to V1.0, or is this a brand-new installation? New install: Do you have any digium cards on the machine? If not then that's probably why it's throwing up the 'Loading module chan_zap.so failed' error. If you're going to run the * box without any of the digium cards then you need to add noload = chan_zap.so in /etc/asterisk/modules.conf New install, have digium card: Perhaps your box isn't recognizing the card due to an IRQ issue? run the dmesg command and make sure there's something in the output that shows your box recognizes the existence of the card. Perhaps posting a bit more information about your setup might help. Cheers Flynn ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Error starting
From what I have seen so far on this list if you are running a version of CVS-Head prior to release of Asterisk 1.0 then you should keep it and not try to change or upgrade it. It would appear that there are a lot of recent changes that may break if you try to upgrade to current CVS-Head, and conversely that 1.0 is missing a lot of functionality that was present in August / September CVS-Head. Craig - Original Message - From: Simon Brown [EMAIL PROTECTED] To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion [EMAIL PROTECTED] Sent: Monday, October 11, 2004 2:16 PM Subject: RE: [Asterisk-Users] Error starting I have been running Asterisk happily for many months and I was trying to upgrade from CVS-HEAD-08/13/04-10 Simon Brown -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of el Flynn Sent: Monday, 11 October 2004 16:09 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Error starting Simon Brown wrote: I have just downloaded V1.0 from CVS and when I try to start Asterisk (after compiling and installing) I get this error: Oct 11 15:51:29 ERROR[1076241024]: chan_zap.c:6205 mkintf: Unable to get parameters Oct 11 15:51:29 ERROR[1076241024]: chan_zap.c:9134 setup_zap: Unable to register channel '2' Oct 11 15:51:29 WARNING[1076241024]: loader.c:334 ast_load_resource: chan_zap.so: load_module failed, returning -1 == Unregistered channel type 'Tor' == Unregistered channel type 'Zap' Oct 11 15:51:29 WARNING[1076241024]: loader.c:429 load_modules: Loading module chan_zap.so failed! Does anyone have any ideas what is wrong? Did you upgrade to V1.0, or is this a brand-new installation? New install: Do you have any digium cards on the machine? If not then that's probably why it's throwing up the 'Loading module chan_zap.so failed' error. If you're going to run the * box without any of the digium cards then you need to add noload = chan_zap.so in /etc/asterisk/modules.conf New install, have digium card: Perhaps your box isn't recognizing the card due to an IRQ issue? run the dmesg command and make sure there's something in the output that shows your box recognizes the existence of the card. Perhaps posting a bit more information about your setup might help. Cheers Flynn ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Error starting
I have just downloaded V1.0 from CVS and when I try to start Asterisk (after compiling and installing) I get this error: Oct 11 15:51:29 ERROR[1076241024]: chan_zap.c:6205 mkintf: Unable to get parameters Oct 11 15:51:29 ERROR[1076241024]: chan_zap.c:9134 setup_zap: Unable to register channel '2' Oct 11 15:51:29 WARNING[1076241024]: loader.c:334 ast_load_resource: chan_zap.so: load_module failed, returning -1 == Unregistered channel type 'Tor' == Unregistered channel type 'Zap' Oct 11 15:51:29 WARNING[1076241024]: loader.c:429 load_modules: Loading module chan_zap.so failed! Does anyone have any ideas what is wrong? Simon Brown ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
