[Asterisk-Users] IBM x306
Hi, This is a little off-topic,but if someone has any info, it could help me a LOT!, I am building an asterisk pbx (1.0.9) on an IBM x306 SCSI machine,my problem is that the BIOS assigns the same IRQ to the SCSI controller, and the TDM400P, i have tried several options of making the bios change the IRQ, but it will always move them together, anyone with some info about my options ? Thanks, Marco. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] IBM x306
Can you try a different slot on the PCI bus?? > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Marco Supino > Sent: Saturday, September 24, 2005 8:51 PM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] IBM x306 > > Hi, > > This is a little off-topic,but if someone has any info, it > could help me a LOT!, > > I am building an asterisk pbx (1.0.9) on an IBM x306 SCSI > machine,my problem is that the BIOS assigns the same IRQ to > the SCSI controller, and the TDM400P, i have tried several > options of making the bios change the IRQ, but it will always > move them together, anyone with some info about my options ? > > Thanks, > > Marco. > > ___ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] IBM x306
On Sun, 25 Sep 2005, Marco Supino wrote: > I am building an asterisk pbx (1.0.9) on an IBM x306 SCSI machine,my > problem is that the BIOS assigns the same IRQ to the SCSI controller, > and the TDM400P, i have tried several options of making the bios change > the IRQ, but it will always move them together, anyone with some info > about my options ? Linux usually don't care about Bios settings, you could try kernel cmdline parameters. Acpi and IRQ are google terms for it. Stefan ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] IBM x306
Only one PCI slot can hold the full size card like the TDM400P , the other slot has a smaller opening on the case. Marco. Alexander Lopez wrote: Can you try a different slot on the PCI bus?? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marco Supino Sent: Saturday, September 24, 2005 8:51 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] IBM x306 Hi, This is a little off-topic,but if someone has any info, it could help me a LOT!, I am building an asterisk pbx (1.0.9) on an IBM x306 SCSI machine,my problem is that the BIOS assigns the same IRQ to the SCSI controller, and the TDM400P, i have tried several options of making the bios change the IRQ, but it will always move them together, anyone with some info about my options ? Thanks, Marco. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] IBM x306
Hi, I tried setpci INTERRUPT_LEVEL (or something similar, cant remmeber now), and also setpci seems like it changed the IRQ, lspci -v still shows the old IRQ Marco. Stefan de Konink wrote: On Sun, 25 Sep 2005, Marco Supino wrote: I am building an asterisk pbx (1.0.9) on an IBM x306 SCSI machine,my problem is that the BIOS assigns the same IRQ to the SCSI controller, and the TDM400P, i have tried several options of making the bios change the IRQ, but it will always move them together, anyone with some info about my options ? Linux usually don't care about Bios settings, you could try kernel cmdline parameters. Acpi and IRQ are google terms for it. Stefan ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] IBM x306
On Sun, Sep 25, 2005 at 03:04:31AM +0200, Stefan de Konink wrote: > On Sun, 25 Sep 2005, Marco Supino wrote: > > > I am building an asterisk pbx (1.0.9) on an IBM x306 SCSI machine,my > > problem is that the BIOS assigns the same IRQ to the SCSI controller, > > and the TDM400P, i have tried several options of making the bios change > > the IRQ, but it will always move them together, anyone with some info > > about my options ? > > Linux usually don't care about Bios settings, you could try kernel cmdline > parameters. Acpi and IRQ are google terms for it. But it's the hardware (bios? interrupt controller) that sends the interrupts in the first place. Right? -- Tzafrir Cohen | [EMAIL PROTECTED] | VIM is http://tzafrir.org.il | | a Mutt's [EMAIL PROTECTED] | | best ICQ# 16849755 | | friend ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] IBM x306
> On Sun, Sep 25, 2005 at 03:04:31AM +0200, Stefan de Konink wrote: > > On Sun, 25 Sep 2005, Marco Supino wrote: > > > > > I am building an asterisk pbx (1.0.9) on an IBM x306 SCSI machine,my > > > problem is that the BIOS assigns the same IRQ to the SCSI controller, > > > and the TDM400P, i have tried several options of making the bios change > > > the IRQ, but it will always move them together, anyone with some info > > > about my options ? > > > > Linux usually don't care about Bios settings, you could try kernel cmdline > > parameters. Acpi and IRQ are google terms for it. > > But it's the hardware (bios? interrupt controller) that sends the > interrupts in the first place. Right? > I am pretty sure you can set the IRQs in BIOS on the X306. I looked at an x305 quickly and you can go into BIOS, select advanced setup, then PNP/PCI Options, change to manual and set your IRQs there. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] IBM x306
I am building an asterisk pbx (1.0.9) on an IBM x306 SCSI machine,my problem is that the BIOS assigns the same IRQ to the SCSI controller, and the TDM400P, i have tried several options of making the bios change the IRQ, but it will always move them together, anyone with some info about my options ? Check the BIOS options -- many others in the x3nn Series as well as the Netfinity before them allow you to specify the IRQ per slot through a deeply buried BIOS config option. I'm not near my rack of IBM servers to boot one to get the exact path but email me offline if you can't find it. g. -- George Pajari, netVOICE communications604 484 VOIP (484 8647 x102) Open Source VoIP/Telephony Specialists 1 877 NET VOIP (638 8647 x102) www.netvoice.ca www.ip-centrex.ca www.digium.ca www.grandstream.ca www.sipura.ca www.snom.ca ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] IBM x306
Hi all, we have same problem with a x346. Mainly, TE410P shares IRQ with network card and if you change IRQ for this slot, automatically change IRQ in network card. Any idea? srsergio -Mensaje original- De: George Pajari [mailto:[EMAIL PROTECTED] Enviado el: lunes, 26 de septiembre de 2005 10:09 Para: Asterisk Users Mailing List - Non-Commercial Discussion Asunto: Re: [Asterisk-Users] IBM x306 >>> I am building an asterisk pbx (1.0.9) on an IBM x306 SCSI machine,my >>> problem is that the BIOS assigns the same IRQ to the SCSI >>> controller, and the TDM400P, i have tried several options of making >>> the bios change the IRQ, but it will always move them together, >>> anyone with some info about my options ? >> Check the BIOS options -- many others in the x3nn Series as well as the Netfinity before them allow you to specify the IRQ per slot through a deeply buried BIOS config option. I'm not near my rack of IBM servers to boot one to get the exact path but email me offline if you can't find it. g. -- George Pajari, netVOICE communications604 484 VOIP (484 8647 x102) Open Source VoIP/Telephony Specialists 1 877 NET VOIP (638 8647 x102) www.netvoice.ca www.ip-centrex.ca www.digium.ca www.grandstream.ca www.sipura.ca www.snom.ca ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.11.6/111 - Release Date: 23/09/2005 ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] IBM x306 - some progress
Hi, I asked yesterday about a problem with x306 and IRQ sharing, didnt get much info, now, i was playing with lspci, and see something strange, lspci -v shows me the TDM400P card is on IRQ 7, and the SCSI card is also on IRQ 7, lspci -bv (from the man - b - shows "bus-centric view, as seen by the BUS and not by the kernel) shows me the TDM400P is on IRQ 5, why does the kernel puts it on IRQ 7 ? any insights much appriciated. Marco. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] IBM x306 - some progress
Hi Marco, As far as I can recall, the IBM setup utility can enable you to change the IRQ of the SCSI controller. In addition, I've never seen a WildCard board bound to IRQ7 on any box, which is very weird in it self. I'm flying over to Ireland today (actually, at the airport right now), and I'm coming back on Sunday. If You'd like, you can bring your box to my office after Rosh-Hashana, and I'll try to help you out. Nir S -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marco Supino Sent: Monday, September 26, 2005 10:06 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] IBM x306 - some progress Hi, I asked yesterday about a problem with x306 and IRQ sharing, didnt get much info, now, i was playing with lspci, and see something strange, lspci -v shows me the TDM400P card is on IRQ 7, and the SCSI card is also on IRQ 7, lspci -bv (from the man - b - shows "bus-centric view, as seen by the BUS and not by the kernel) shows me the TDM400P is on IRQ 5, why does the kernel puts it on IRQ 7 ? any insights much appriciated. Marco. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] IBM x306 - some progress
I dug up my Netfinity ServeRaid readme: "Power on your system and observe the screen. Press F1 when the "Press F1 for Configuration/Setup" and "Press F2 for Diagnostics" messages appear. The Configuration/Setup Utility main menu will appear. Select Advanced Setup using the Up or Down arrow key and press Enter. Select System Service Processor Settings using the Up or Down arrow key and press Enter. -->Change System Service Processor Hardware Interrupt from Autoconfigure to IRQ 5. <-- Press Esc. Select PCI Bus Control using the Up or Down arrow key and press Enter. Select Planar Device PCI Interrupt Routing using the up or down arrow keys and press Enter. -->Change Planar Raid IRQ from Autoconfigure to an available IRQ using the Left or Right arrow key.<-- Notes: If IRQ 10 is available, use IRQ 10. If a PCI RAID adapter card is also installed on your system, select Slot Device PCI Interrupt Routing using the Up or Down arrow key and press Enter. Change the IRQ for the slot used from Autoconfigure to an available IRQ (you can share the Planar RAID IRQ)." In my Netfinity w/ TDM400, I have the TDM set to IRQ 15, the IDE controller disabled (don't care about the CD-ROM), my PRI TDM card to IRQ 11, VGA set to IRQ3 (COM ports disabled) and my ServeRaid set to IRQ9. IRQ 5 is used for the System Service Processor. IIRC all this I set in the F1 Setup. Rule of thumb best practice is to disable any hardware in the system that isn't needed specifically: USB, COM ports, parallel and this should give you plenty of elbow room to juggle interrupts. hth -Original Message- From: Nir Simionovich [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 27, 2005 1:48 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] IBM x306 - some progress Hi Marco, As far as I can recall, the IBM setup utility can enable you to change the IRQ of the SCSI controller. In addition, I've never seen a WildCard board bound to IRQ7 on any box, which is very weird in it self. I'm flying over to Ireland today (actually, at the airport right now), and I'm coming back on Sunday. If You'd like, you can bring your box to my office after Rosh-Hashana, and I'll try to help you out. Nir S -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marco Supino Sent: Monday, September 26, 2005 10:06 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] IBM x306 - some progress Hi, I asked yesterday about a problem with x306 and IRQ sharing, didnt get much info, now, i was playing with lspci, and see something strange, lspci -v shows me the TDM400P card is on IRQ 7, and the SCSI card is also on IRQ 7, lspci -bv (from the man - b - shows "bus-centric view, as seen by the BUS and not by the kernel) shows me the TDM400P is on IRQ 5, why does the kernel puts it on IRQ 7 ? any insights much appriciated. Marco. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
