Re: [Asterisk-Users] Setting CallerID on UK BRI line
yep, my mobile displays caller id for other numbers - and it even works perfectly displaying caller id information set by a cheap ISDN pbx on the *same* ISDN line as the Asterisk box. Curious. Even without setting a callerid on the outgoing calls I get "No Caller ID" on my mobile (or other phones - including other BT lines). BT are not withholding a number and I can change the callerID presented on the other phone system and it works perfectly. Strange, I will investigate more later. Remembering that you can only set caller ID to numbers that have been issued to you by BT, assuming you have a valid telephone number of, for example, 0118 321 1234 Try: SetCallerID(4) SetCallerID(34) SetCallerID(234) SetCallerID(11234) SetCallerID(211234) Normally you find it's either the 6 digit version or the single digit version that works with BT. Linus ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Setting CallerID on UK BRI line
Hi Nick, yep, my mobile displays caller id for other numbers - and it even works perfectly displaying caller id information set by a cheap ISDN pbx on the *same* ISDN line as the Asterisk box. Curious. Even without setting a callerid on the outgoing calls I get "No Caller ID" on my mobile (or other phones - including other BT lines). BT are not withholding a number and I can change the callerID presented on the other phone system and it works perfectly. Strange, I will investigate more later. Thanks, Benjamin "Nick Barnes" <[EMAIL PROTECTED]> Sent by: [EMAIL PROTECTED] 19/10/2004 12:18 Please respond to Asterisk Users Mailing List - Non-Commercial Discussion <[EMAIL PROTECTED]> To "'Asterisk Users Mailing List - Non-Commercial Discussion'" <[EMAIL PROTECTED]> cc Subject RE: [Asterisk-Users] Setting CallerID on UK BRI line Benjamin: > So I dial 9 followed by my mobile number and the call comes > through fine but the display says "No Caller ID". Assuming that your mobile is displaying caller IDs for other numbers and your ISDN lines are with BT. There are two ways in which the number can be withheld: 1 - Caller ID is withheld on the line you're calling from. If this is the case, prefix the dialed number with '1470' which should release the caller ID. 2 - You're blocking the caller ID yourself. If this is the case, remove the prefix '141' from the dialed number. If you don't set a caller ID to anything or set it to an invalid number, BT will default the caller ID to the base number of the ISDN device, so remove the 'SetCallerID' line to do your testing. Otherwise, you need only four or six least significant digits of the number for the SetCallerID command. Nick Barnes ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users This email has been scanned for all viruses by the MessageLabs SkyScan service - please check that your Hichrom Virus Scanner is running and up to date!. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Setting CallerID on UK BRI line
On Tue, 19 Oct 2004 [EMAIL PROTECTED] wrote: > I'm at work now and don't have my access to my asterisk box (which isn't > much use as I can't post debug data or other lines from the config files). > Just wondered if anyone had done this and where I was going wrong (I have > tried different number in addition to 3317**, like 011893317**, 93317**, > 7** and entirely ficticious numbers). The console shows the caller ID > being set but nothing appears on the remote phone. You need to ask your BT contact how many callerid digits they expect. A common configuration is the same number of digits as are given to you for DDI. Also you will often need prilocaldialplan=unknown for EuroISDN. This means the number is just digits in the form agreed to by you and your telco which is what is normally used for outgoing number presentation for EuroISDN. Again, check with your BT contact: * verify that the line is set to accept calling number identification * the expected "Type Of Number" and "Numbering Plan" for the id * the expected number of digits to send. Peter ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Setting CallerID on UK BRI line
Benjamin: > So I dial 9 followed by my mobile number and the call comes > through fine but the display says "No Caller ID". Assuming that your mobile is displaying caller IDs for other numbers and your ISDN lines are with BT. There are two ways in which the number can be withheld: 1 - Caller ID is withheld on the line you're calling from. If this is the case, prefix the dialed number with '1470' which should release the caller ID. 2 - You're blocking the caller ID yourself. If this is the case, remove the prefix '141' from the dialed number. If you don't set a caller ID to anything or set it to an invalid number, BT will default the caller ID to the base number of the ISDN device, so remove the 'SetCallerID' line to do your testing. Otherwise, you need only four or six least significant digits of the number for the SetCallerID command. Nick Barnes ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Setting CallerID on UK BRI line
Hi all, was just wondering if there were any special things I had to do to set the outgoing caller ID on a UK BRI (EUROISDN) line. I've got a line in my extensions.conf which says: exten => _9.,1,SetCallerID(3317**) This is then followed by the dial command. So I dial 9 followed by my mobile number and the call comes through fine but the display says "No Caller ID". I'm at work now and don't have my access to my asterisk box (which isn't much use as I can't post debug data or other lines from the config files). Just wondered if anyone had done this and where I was going wrong (I have tried different number in addition to 3317**, like 011893317**, 93317**, 7** and entirely ficticious numbers). The console shows the caller ID being set but nothing appears on the remote phone. Thanks for your help! Benjamin ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
