[Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Hello list, Did anyone already get the T410P card running in an HP-Compaq DL380 G4 server? If yes, how? I'm using Fedora Core 3 with 2.6.11-1.35_FC3smp Kernel package. Thanks in advance, Roland ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
What is your dmesg output when you fire up the card. There were some problems with TE410P and the intel chipset used in the DL380 G4's. You need firmware at least 'TE410P version c01a010b' Contact Digium and RMA if you have older firmware (basically the symptom will be everything is ok, but the never generates an interrupt under /proc/interrupts Cheers, Peter -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Roland Zagler Sent: Wednesday, 20 July 2005 4:52 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Hello list, Did anyone already get the T410P card running in an HP-Compaq DL380 G4 server? If yes, how? I'm using Fedora Core 3 with 2.6.11-1.35_FC3smp Kernel package. Thanks in advance, Roland ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Contact Digium Support. They have been very helpful with this issue (mention your using the G4 server with the Intel E7520 Chipset..) Cheers, Peter -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Erick Perez Sent: Saturday, 5 February 2005 5:51 AM To: Eric Bishop; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Has anyone on this list have a way to contact ServerWorks? they make the mobos for the G4. I dont have a G4 but i do know HP in the G line uses ServerWorks I have to make a full stop ordering on 2 G4 monsters because of this thread...However one friend is using a sangoma card without problems TE410P/ServerWork motherboard combo not working because of bus problems my less than 1 cent On Mon, 31 Jan 2005 20:42:47 +1100, Eric Bishop [EMAIL PROTECTED] wrote: Did anyone get anywhere with this thread? Any HP G4 series servers working? On Wed, 26 Jan 2005 09:46:31 +1100, Eric Bishop [EMAIL PROTECTED] wrote: Has anyone had any luck with this issue and new Asterisk/Zaptel releases (1.05/1.04)? I am still searching for a solution and waiting for that Eureka! moment.. On Thu, 20 Jan 2005 09:20:09 +0100, Tais M. Hansen [EMAIL PROTECTED] wrote: On Wednesday 19 January 2005 23:15, Eric Bishop wrote: Well guys this is truly bizarre. I managed to get a DL360 G3 to show interrupts with FC2 but not FC3. Exact same config and setup proceedure. Ofcourse neither FC2 or FC3 show interrupts with the DL360 G4. I think TE410P is just a flakey card. Anyone got a DL360 G3 going with a TE410P and FC3? I did manage to get a TE110P running on the DL380 G4. Still can't get the TE410P working in the G4 though. Supports your theory. Sadly we're now being forced to look elsewhere for PRI cards. -- Regards, Tais M. Hansen ComX Networks A/S Tel: +45-70257474 Fax: +45-70257374 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- --- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Has anyone on this list have a way to contact ServerWorks? they make the mobos for the G4. I dont have a G4 but i do know HP in the G line uses ServerWorks I have to make a full stop ordering on 2 G4 monsters because of this thread...However one friend is using a sangoma card without problems TE410P/ServerWork motherboard combo not working because of bus problems my less than 1 cent On Mon, 31 Jan 2005 20:42:47 +1100, Eric Bishop [EMAIL PROTECTED] wrote: Did anyone get anywhere with this thread? Any HP G4 series servers working? On Wed, 26 Jan 2005 09:46:31 +1100, Eric Bishop [EMAIL PROTECTED] wrote: Has anyone had any luck with this issue and new Asterisk/Zaptel releases (1.05/1.04)? I am still searching for a solution and waiting for that Eureka! moment.. On Thu, 20 Jan 2005 09:20:09 +0100, Tais M. Hansen [EMAIL PROTECTED] wrote: On Wednesday 19 January 2005 23:15, Eric Bishop wrote: Well guys this is truly bizarre. I managed to get a DL360 G3 to show interrupts with FC2 but not FC3. Exact same config and setup proceedure. Ofcourse neither FC2 or FC3 show interrupts with the DL360 G4. I think TE410P is just a flakey card. Anyone got a DL360 G3 going with a TE410P and FC3? I did manage to get a TE110P running on the DL380 G4. Still can't get the TE410P working in the G4 though. Supports your theory. Sadly we're now being forced to look elsewhere for PRI cards. -- Regards, Tais M. Hansen ComX Networks A/S Tel: +45-70257474 Fax: +45-70257374 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- --- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Did anyone get anywhere with this thread? Any HP G4 series servers working? On Wed, 26 Jan 2005 09:46:31 +1100, Eric Bishop [EMAIL PROTECTED] wrote: Has anyone had any luck with this issue and new Asterisk/Zaptel releases (1.05/1.04)? I am still searching for a solution and waiting for that Eureka! moment.. On Thu, 20 Jan 2005 09:20:09 +0100, Tais M. Hansen [EMAIL PROTECTED] wrote: On Wednesday 19 January 2005 23:15, Eric Bishop wrote: Well guys this is truly bizarre. I managed to get a DL360 G3 to show interrupts with FC2 but not FC3. Exact same config and setup proceedure. Ofcourse neither FC2 or FC3 show interrupts with the DL360 G4. I think TE410P is just a flakey card. Anyone got a DL360 G3 going with a TE410P and FC3? I did manage to get a TE110P running on the DL380 G4. Still can't get the TE410P working in the G4 though. Supports your theory. Sadly we're now being forced to look elsewhere for PRI cards. -- Regards, Tais M. Hansen ComX Networks A/S Tel: +45-70257474 Fax: +45-70257374 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Has anyone had any luck with this issue and new Asterisk/Zaptel releases (1.05/1.04)? I am still searching for a solution and waiting for that Eureka! moment.. On Thu, 20 Jan 2005 09:20:09 +0100, Tais M. Hansen [EMAIL PROTECTED] wrote: On Wednesday 19 January 2005 23:15, Eric Bishop wrote: Well guys this is truly bizarre. I managed to get a DL360 G3 to show interrupts with FC2 but not FC3. Exact same config and setup proceedure. Ofcourse neither FC2 or FC3 show interrupts with the DL360 G4. I think TE410P is just a flakey card. Anyone got a DL360 G3 going with a TE410P and FC3? I did manage to get a TE110P running on the DL380 G4. Still can't get the TE410P working in the G4 though. Supports your theory. Sadly we're now being forced to look elsewhere for PRI cards. -- Regards, Tais M. Hansen ComX Networks A/S Tel: +45-70257474 Fax: +45-70257374 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Wednesday 19 January 2005 23:15, Eric Bishop wrote: Well guys this is truly bizarre. I managed to get a DL360 G3 to show interrupts with FC2 but not FC3. Exact same config and setup proceedure. Ofcourse neither FC2 or FC3 show interrupts with the DL360 G4. I think TE410P is just a flakey card. Anyone got a DL360 G3 going with a TE410P and FC3? I did manage to get a TE110P running on the DL380 G4. Still can't get the TE410P working in the G4 though. Supports your theory. Sadly we're now being forced to look elsewhere for PRI cards. -- Regards, Tais M. Hansen ComX Networks A/S Tel: +45-70257474 Fax: +45-70257374 pgpL97AQuIMRT.pgp Description: PGP signature ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Well guys this is truly bizarre. I managed to get a DL360 G3 to show interrupts with FC2 but not FC3. Exact same config and setup proceedure. Ofcourse neither FC2 or FC3 show interrupts with the DL360 G4. I think TE410P is just a flakey card. Anyone got a DL360 G3 going with a TE410P and FC3? On Tue, 18 Jan 2005 23:38:01 +1100, Eric Bishop [EMAIL PROTECTED] wrote: Can anybody who has got a working DL360 G3 or G4 with the TE410P showing interrupts please be kind enough to post to the list their BIOS version and settings as well as their zaptel.conf and zapata.conf. Also useful would be the the output of cat /proc/interrupts. If you had trouble getting it going and got it going would you also be kind enough to tell us how? On Mon, 17 Jan 2005 08:14:07 +1030, Peter Childs [EMAIL PROTECTED] wrote: Thanks for that. I'll keep an eye on the list, and cross my fingers :) Cheers, Peter -Original Message- From: Eric Bishop [mailto:[EMAIL PROTECTED] Sent: Saturday, 15 January 2005 12:06 PM To: Peter Childs; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Hi Peter, Basically they told me that they have several people complaining of the problem with G4 series servers and they their hardware engineers are going to order some of these servers and look into it. Currenly the only solution they have is to use a different motherboard. On Fri, 14 Jan 2005 16:10:10 +1030, Peter Childs [EMAIL PROTECTED] wrote: Gday Eric. Re: TE410P w/DL380 G4 no interrupts. Did you ever get a resolution to this issue. I have something similar in the newest version of the NEC rack mounted servers where the older versions of the servers worked fine. 3 days going and I'm going to pour some petrol on this box fairly shortly, and I think I will feel much better :) Cheers, Peter ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Can I ask what BIOS version you are running? Also what MPS Table Mode are you using (in the BIOS Advanced Options). I have thus far been getting no interrupts on either a G3 or G4 DL360. On Mon, 3 Jan 2005 14:14:56 -0500, Karl H. Putz [EMAIL PROTECTED] wrote: -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Monday, January 03, 2005 1:35 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Hi, Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? For me the card is detected fine, but the system just never sees an interrupt from the card. I've tried everything I can think of. The card definitely works. Its Fedora Core, but we also tried a stock 2.6.10 kernel. We tried with and without Hyperthreading, with noapic, we disabled all the hardware we could, etc etc... So - has anyone used this combination successfully? This customer has quite a thing for HP - so if the DL380 is going to be a problem, is there another rack-mount HP server that someone can vouch for with the TE410P? I am using DL360 G3s with dual Xeon processors (Hyperthreading turned on) with no problems. I am running a Whitebox 2.4 kernel. Karl Putz Thanks, Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Can anybody who has got a working DL360 G3 or G4 with the TE410P showing interrupts please be kind enough to post to the list their BIOS version and settings as well as their zaptel.conf and zapata.conf. Also useful would be the the output of cat /proc/interrupts. If you had trouble getting it going and got it going would you also be kind enough to tell us how? On Mon, 17 Jan 2005 08:14:07 +1030, Peter Childs [EMAIL PROTECTED] wrote: Thanks for that. I'll keep an eye on the list, and cross my fingers :) Cheers, Peter -Original Message- From: Eric Bishop [mailto:[EMAIL PROTECTED] Sent: Saturday, 15 January 2005 12:06 PM To: Peter Childs; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Hi Peter, Basically they told me that they have several people complaining of the problem with G4 series servers and they their hardware engineers are going to order some of these servers and look into it. Currenly the only solution they have is to use a different motherboard. On Fri, 14 Jan 2005 16:10:10 +1030, Peter Childs [EMAIL PROTECTED] wrote: Gday Eric. Re: TE410P w/DL380 G4 no interrupts. Did you ever get a resolution to this issue. I have something similar in the newest version of the NEC rack mounted servers where the older versions of the servers worked fine. 3 days going and I'm going to pour some petrol on this box fairly shortly, and I think I will feel much better :) Cheers, Peter ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Are these the G3 or G4 series? On Mon, 03 Jan 2005 11:52:09 -0800, Scott Stingel [EMAIL PROTECTED] wrote: Hi Steve- My customer has five DL320's and ten DL360's - all running asterisk with TE410P's with no problems - no 380's though. I'm using Fedora core 1 and 2.4.xxx kernel.. I'm assuming that you've done the correct initialization for the card: modprobe and ztcfg etc? Sounds like a 2.6 kernel issue if so. Regards Scott Stingel President, Emerging Voice Technology, Inc. www.evtmedia.com [EMAIL PROTECTED] wrote: Hi, Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? For me the card is detected fine, but the system just never sees an interrupt from the card. I've tried everything I can think of. The card definitely works. Its Fedora Core, but we also tried a stock 2.6.10 kernel. We tried with and without Hyperthreading, with noapic, we disabled all the hardware we could, etc etc... So - has anyone used this combination successfully? This customer has quite a thing for HP - so if the DL380 is going to be a problem, is there another rack-mount HP server that someone can vouch for with the TE410P? Thanks, Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users . ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Fri, 14 Jan 2005, Steve Hanselman wrote: Has anyone also logged a support call with Digium, it has to be either the card, Linux or the Zaptel drivers. Yes of course - we have a call open. Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Sat, 15 Jan 2005, Begumisa Gerald M wrote: Yup, I found their support very unhelpful and unwilling to go the extra (or even the first) mile.. Might ACPI (not APIC) have anything to do with this condition? I once had a hard time with a bunch of cards which were not taking interrupts. I disabled ACPI interrupt routing (from the grub boot prompt, put pci=noacpi) and everything started working. Well, these were TDM400P cards (5 of them) anyway with a different type of machine altogether but it just might be worth checking out. I did try pci=noacpi and also compiling the kernel with it turned off - both to no avail. Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Yup, I found their support very unhelpful and unwilling to go the extra (or even the first) mile.. On Sat, 15 Jan 2005 18:27:49 +1300, Matt Riddell [EMAIL PROTECTED] wrote: Eric Bishop wrote: I logged a support issue with HP and their response was that it's not their server that is the problem and if other cards show interrupts (which they do) there's nothing more they can do And you told them that this is the only server the cards don't work in? -- Cheers, Matt Riddell ___ http://www.sineapps.com/news.php (Daily Asterisk News - html) http://www.sineapps.com/rssfeed.php (Daily Asterisk News - rss) ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Yup, I found their support very unhelpful and unwilling to go the extra (or even the first) mile.. Might ACPI (not APIC) have anything to do with this condition? I once had a hard time with a bunch of cards which were not taking interrupts. I disabled ACPI interrupt routing (from the grub boot prompt, put pci=noacpi) and everything started working. Well, these were TDM400P cards (5 of them) anyway with a different type of machine altogether but it just might be worth checking out. Rgds, Gerald. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Has anyone also logged a support call with Digium, it has to be either the card, Linux or the Zaptel drivers. Steve -Original Message- From: Joshua McAdam [mailto:[EMAIL PROTECTED] Sent: 14 January 2005 06:30 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Has anyone logged a support issue with HP on this one? I still haven't been able to get it working so far, So I'm going to log a support issue here in australia to see what HP can do about this and was wondering if anyone else has. Josh -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alexander Lopez Sent: Monday, 10 January 2005 4:22 PM To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Make sure you has a span defined for each port on the TE410P. With out signaling it would not take interrupts. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Karl H. Putz Sent: Monday, January 10, 2005 12:38 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server I have been having this exact problem with a Tatung dual EMT-64 server as well. I have been trying to get a TE410P running and all looks great, driver loads, runs ztcfg OK, etc. but no interrupts are ever processed. One additional piece of info that I have not seen in this thread is that I am able to successfully start and run a T100P card in this system. In the same PCI slot, wct1xxp driver built from the same CVS HEAD version as the wct4xxp. Just hoping this might shed some light on the problem for any Digium folks monitoring the forum. Karl Putz ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users The information contained in this email is intended for the personal and confidential use of the addressee only. It may also be privileged information. If you are not the intended recipient then you are hereby notified that you have received this document in error and that any review, distribution or copying of this document is strictly prohibited. If you have received this communication in error, please notify Brendata immediately on: +44 (0)1268 466100, or email '[EMAIL PROTECTED]' Brendata (UK) Ltd Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX UK Registered Office as above. Registered in England No. 2764339 See our current vacancies at www.brendata.co.uk ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
I've logged a support call with digium and with our reseller here in Australia (ATP), but haven't had much of an answer from either so far. Does anyone know if the PCI interrupts configured to be edge triggered rather than level triggered or vice versa could have an effect on the TE410P's and does anyone know what method is used within the DL380 G4s? I'm guessing probably level because the chipset in them is so new, and maybe the PCI interface on the TE410P's expects edge triggering (could this be why they don't share interrupts very well?), so it doesn't generate interrupts properly? - I could be wrong and barking up the wrong tree completely here Does anyone have any ideas on this? This is the question I am thinking of asking HP support (What irq trigger method is used in the DL380 G4's - I can't find an option for this particular setting in the G4 BIOS.), because I've tried everything else I can think of to get the cards working (Different Linux Versions Kernel Versions, Different Zaptel Driver Versions, Putting the Card in Different Slots, Changing BIOS Settings etc). Josh -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Hanselman Sent: Friday, 14 January 2005 7:24 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Has anyone also logged a support call with Digium, it has to be either the card, Linux or the Zaptel drivers. Steve -Original Message- From: Joshua McAdam [mailto:[EMAIL PROTECTED] Sent: 14 January 2005 06:30 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Has anyone logged a support issue with HP on this one? I still haven't been able to get it working so far, So I'm going to log a support issue here in australia to see what HP can do about this and was wondering if anyone else has. Josh -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alexander Lopez Sent: Monday, 10 January 2005 4:22 PM To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Make sure you has a span defined for each port on the TE410P. With out signaling it would not take interrupts. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Karl H. Putz Sent: Monday, January 10, 2005 12:38 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server I have been having this exact problem with a Tatung dual EMT-64 server as well. I have been trying to get a TE410P running and all looks great, driver loads, runs ztcfg OK, etc. but no interrupts are ever processed. One additional piece of info that I have not seen in this thread is that I am able to successfully start and run a T100P card in this system. In the same PCI slot, wct1xxp driver built from the same CVS HEAD version as the wct4xxp. Just hoping this might shed some light on the problem for any Digium folks monitoring the forum. Karl Putz ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users The information contained in this email is intended for the personal and confidential use of the addressee only. It may also be privileged information. If you are not the intended recipient then you are hereby notified that you have received this document in error and that any review, distribution or copying of this document is strictly prohibited. If you have received this communication in error, please notify Brendata immediately on: +44 (0)1268 466100, or email '[EMAIL PROTECTED]' Brendata (UK) Ltd Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX UK Registered Office as above. Registered in England No. 2764339 See our current vacancies at www.brendata.co.uk ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Fri, 2005-01-14 at 09:23 +, Steve Hanselman wrote: Has anyone also logged a support call with Digium, it has to be either the card, Linux or the Zaptel drivers. You missed the obvious or the HP Compaq DL380 G4 server Regards, Adam ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
I'm assuming that other non Digium cards work in it, but yes, you're right. Has anybody run any other PCI cards in those slots under Linux and seen interrupts from those cards? Steve -Original Message- From: Adam Goryachev [mailto:[EMAIL PROTECTED] Sent: 14 January 2005 09:51 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server On Fri, 2005-01-14 at 09:23 +, Steve Hanselman wrote: Has anyone also logged a support call with Digium, it has to be either the card, Linux or the Zaptel drivers. You missed the obvious or the HP Compaq DL380 G4 server Regards, Adam ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users The information contained in this email is intended for the personal and confidential use of the addressee only. It may also be privileged information. If you are not the intended recipient then you are hereby notified that you have received this document in error and that any review, distribution or copying of this document is strictly prohibited. If you have received this communication in error, please notify Brendata immediately on: +44 (0)1268 466100, or email '[EMAIL PROTECTED]' Brendata (UK) Ltd Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX UK Registered Office as above. Registered in England No. 2764339 See our current vacancies at www.brendata.co.uk ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Steve Hanselman wrote: I'm assuming that other non Digium cards work in it, but yes, you're right. Has anybody run any other PCI cards in those slots under Linux and seen interrupts from those cards? You'd be hard pressed to find a standard card requiring accurate interrupts 1000 times per second... -- Cheers, Matt Riddell ___ http://www.sineapps.com/news.php (Daily Asterisk News - html) http://www.sineapps.com/rssfeed.php (Daily Asterisk News - rss) ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Any interrupts would be useful, that's the issue, the interrupt count is zero. -Original Message- From: Matt Riddell [mailto:[EMAIL PROTECTED] Sent: 14 January 2005 11:16 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Steve Hanselman wrote: I'm assuming that other non Digium cards work in it, but yes, you're right. Has anybody run any other PCI cards in those slots under Linux and seen interrupts from those cards? You'd be hard pressed to find a standard card requiring accurate interrupts 1000 times per second... -- Cheers, Matt Riddell ___ http://www.sineapps.com/news.php (Daily Asterisk News - html) http://www.sineapps.com/rssfeed.php (Daily Asterisk News - rss) ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users The information contained in this email is intended for the personal and confidential use of the addressee only. It may also be privileged information. If you are not the intended recipient then you are hereby notified that you have received this document in error and that any review, distribution or copying of this document is strictly prohibited. If you have received this communication in error, please notify Brendata immediately on: +44 (0)1268 466100, or email '[EMAIL PROTECTED]' Brendata (UK) Ltd Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX UK Registered Office as above. Registered in England No. 2764339 See our current vacancies at www.brendata.co.uk ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Hi Peter, Basically they told me that they have several people complaining of the problem with G4 series servers and they their hardware engineers are going to order some of these servers and look into it. Currenly the only solution they have is to use a different motherboard. On Fri, 14 Jan 2005 16:10:10 +1030, Peter Childs [EMAIL PROTECTED] wrote: Gday Eric. Re: TE410P w/DL380 G4 no interrupts. Did you ever get a resolution to this issue. I have something similar in the newest version of the NEC rack mounted servers where the older versions of the servers worked fine. 3 days going and I'm going to pour some petrol on this box fairly shortly, and I think I will feel much better :) Cheers, Peter ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
I logged a support issue with HP and their response was that it's not their server that is the problem and if other cards show interrupts (which they do) there's nothing more they can do On Fri, 14 Jan 2005 16:30:25 +1000, Joshua McAdam [EMAIL PROTECTED] wrote: Has anyone logged a support issue with HP on this one? I still haven't been able to get it working so far, So I'm going to log a support issue here in australia to see what HP can do about this and was wondering if anyone else has. Josh -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alexander Lopez Sent: Monday, 10 January 2005 4:22 PM To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Make sure you has a span defined for each port on the TE410P. With out signaling it would not take interrupts. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Karl H. Putz Sent: Monday, January 10, 2005 12:38 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server I have been having this exact problem with a Tatung dual EMT-64 server as well. I have been trying to get a TE410P running and all looks great, driver loads, runs ztcfg OK, etc. but no interrupts are ever processed. One additional piece of info that I have not seen in this thread is that I am able to successfully start and run a T100P card in this system. In the same PCI slot, wct1xxp driver built from the same CVS HEAD version as the wct4xxp. Just hoping this might shed some light on the problem for any Digium folks monitoring the forum. Karl Putz ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
It's most definately something to do with the G4 series both DL360 and DL380. Most G3 series owners are reporting it working OK. On Fri, 14 Jan 2005 20:50:40 +1100, Adam Goryachev [EMAIL PROTECTED] wrote: On Fri, 2005-01-14 at 09:23 +, Steve Hanselman wrote: Has anyone also logged a support call with Digium, it has to be either the card, Linux or the Zaptel drivers. You missed the obvious or the HP Compaq DL380 G4 server Regards, Adam ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Eric Bishop wrote: I logged a support issue with HP and their response was that it's not their server that is the problem and if other cards show interrupts (which they do) there's nothing more they can do And you told them that this is the only server the cards don't work in? -- Cheers, Matt Riddell ___ http://www.sineapps.com/news.php (Daily Asterisk News - html) http://www.sineapps.com/rssfeed.php (Daily Asterisk News - rss) ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Has anyone logged a support issue with HP on this one? I still haven't been able to get it working so far, So I'm going to log a support issue here in australia to see what HP can do about this and was wondering if anyone else has. Josh -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alexander Lopez Sent: Monday, 10 January 2005 4:22 PM To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Make sure you has a span defined for each port on the TE410P. With out signaling it would not take interrupts. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Karl H. Putz Sent: Monday, January 10, 2005 12:38 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server I have been having this exact problem with a Tatung dual EMT-64 server as well. I have been trying to get a TE410P running and all looks great, driver loads, runs ztcfg OK, etc. but no interrupts are ever processed. One additional piece of info that I have not seen in this thread is that I am able to successfully start and run a T100P card in this system. In the same PCI slot, wct1xxp driver built from the same CVS HEAD version as the wct4xxp. Just hoping this might shed some light on the problem for any Digium folks monitoring the forum. Karl Putz ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
I have been having this exact problem with a Tatung dual EMT-64 server as well. I have been trying to get a TE410P running and all looks great, driver loads, runs ztcfg OK, etc. but no interrupts are ever processed. One additional piece of info that I have not seen in this thread is that I am able to successfully start and run a T100P card in this system. In the same PCI slot, wct1xxp driver built from the same CVS HEAD version as the wct4xxp. Just hoping this might shed some light on the problem for any Digium folks monitoring the forum. Karl Putz ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Make sure you has a span defined for each port on the TE410P. With out signaling it would not take interrupts. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Karl H. Putz Sent: Monday, January 10, 2005 12:38 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server I have been having this exact problem with a Tatung dual EMT-64 server as well. I have been trying to get a TE410P running and all looks great, driver loads, runs ztcfg OK, etc. but no interrupts are ever processed. One additional piece of info that I have not seen in this thread is that I am able to successfully start and run a T100P card in this system. In the same PCI slot, wct1xxp driver built from the same CVS HEAD version as the wct4xxp. Just hoping this might shed some light on the problem for any Digium folks monitoring the forum. Karl Putz ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Fri, 7 Jan 2005, Eric Bishop wrote: The problem definately seems to be G4 server related, most folks with G3's seem to be unaffected. Anyone know where there might be a changelog of G3-G4? That might reveal some pertinent information. 2nd hand info from HP seemed to be that the main change is the raid controller integrated on the main board. Also, PCI riser is no longer hot-swap as standard; that is an option. Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Eric Bishop wrote: Well it's clear now that this is not an isolated issue. Has anyone been in touch with Digium about this issue? I have logged a support issue with them, but thus far have not received a response. Anyone had better luck with Digium support and the Compaq/HP G4 server series? On Wed, 5 Jan 2005 18:05:22 +0100, Tais M. Hansen [EMAIL PROTECTED] wrote: On Monday 03 January 2005 19:34, [EMAIL PROTECTED] wrote: Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? We're struggeling with the same thing right now. We have several TE410Ps working on DL380G3s, but have so far been unsuccessful in getting it to work on the G4. Our G4 config is dual xeon 3.6ghz, 2gb ram, kernel 2.6.10 and 2.4.28. zaptel and wct4xxp modules loads fine. At this point the flashing red lights on the wct4xxp are turned off. zttool shows all spans are OK, no matter if there are anything plugged in. -- Regards, Tais M. Hansen ComX Networks A/S Tel: +45-70257474 Fax: +45-70257374 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users I just installed few TE410P in ml330/350 G3 dual Xeon 3.6ghz without any problem (kernel 2.6.8) Coulds you describe the problem more specificaly. Jack ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Wednesday 05 January 2005 21:43, Steven Critchfield wrote: While browsing the Wiki, I found this bit of information. Maybe it will help you out some. http://www.voip-info.org/wiki-Asterisk+TE410p+No+Interrupts Sadly it didn't do anything for me. Is there anyway to get any kind of status or something from the card. Any indicator of whats going on? -- Regards, Tais M. Hansen ComX Networks A/S Tel: +45-70257474 Fax: +45-70257374 pgpFwG2zlIoeX.pgp Description: PGP signature ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Thu, 2005-01-06 at 12:36 +0100, Tais M. Hansen wrote: On Wednesday 05 January 2005 21:43, Steven Critchfield wrote: While browsing the Wiki, I found this bit of information. Maybe it will help you out some. http://www.voip-info.org/wiki-Asterisk+TE410p+No+Interrupts Sadly it didn't do anything for me. Is there anyway to get any kind of status or something from the card. Any indicator of whats going on? Since you don't have any interupts firing, I wouldn't expect the card to be interactive with anything else. I don't remember for sure if you had tried it with IOAPIC turned off. I did look back and see that you only have 9 IRQs actually in use so the normal PIC should be fine. I would try that after a full power down and power disconnect. The power disconnect should get everything internal to reset and initialize properly on next power up. -- Steven Critchfield [EMAIL PROTECTED] ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Thu, 6 Jan 2005, pbx wrote: I just installed few TE410P in ml330/350 G3 dual Xeon 3.6ghz without any problem (kernel 2.6.8) Coulds you describe the problem more specificaly. Jack Suggest you review the thread where you will find several explanations of the problem. It's on G4 servers it seems. Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Thu, 6 Jan 2005, Steven Critchfield wrote: I don't remember for sure if you had tried it with IOAPIC turned off. I did look back and see that you only have 9 IRQs actually in use so the normal PIC should be fine. I would try that after a full power down and power disconnect. The power disconnect should get everything internal to reset and initialize properly on next power up. I tried it that way, with no difference. Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
The problem definately seems to be G4 server related, most folks with G3's seem to be unaffected. Anyone know where there might be a changelog of G3-G4? That might reveal some pertinent information. On Thu, 6 Jan 2005 16:53:09 +0200 (SAST), [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: On Thu, 6 Jan 2005, Steven Critchfield wrote: I don't remember for sure if you had tried it with IOAPIC turned off. I did look back and see that you only have 9 IRQs actually in use so the normal PIC should be fine. I would try that after a full power down and power disconnect. The power disconnect should get everything internal to reset and initialize properly on next power up. I tried it that way, with no difference. Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
I will certainly try that. Please also let me know your progress.. On Tue, 4 Jan 2005 22:12:23 +0200 (SAST), [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: On Mon, 3 Jan 2005 [EMAIL PROTECTED] wrote: Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? Thanks for all the postings on this thread. I have a new and completely untested theory - the G4 has the option of a non-hotplug or a hotplug PCI riser cage. My new theory is that my problems with the TE410P have something to do with hotplug. Now I don't know what riser cage my customer ordered, but I see it has two slots with quick release clips holding the cards in, one with a screw. So just maybe the quick-release implies hotplug. I don't know much about PCI-Hotplug, but there's an option in the kernel config about having a Compaq PCI Hotplug controller. Do I have one of those?... I see some irq related stuff in the source of the compaq hotplug driver in the kernel - so perhaps I'm not loading that, or it doesn't work on the DL380 G4 right... Maybe even if I don't have the hotplug riser I still need this driver... Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Monday 03 January 2005 19:34, [EMAIL PROTECTED] wrote: Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? We're struggeling with the same thing right now. We have several TE410Ps working on DL380G3s, but have so far been unsuccessful in getting it to work on the G4. Our G4 config is dual xeon 3.6ghz, 2gb ram, kernel 2.6.10 and 2.4.28. zaptel and wct4xxp modules loads fine. At this point the flashing red lights on the wct4xxp are turned off. zttool shows all spans are OK, no matter if there are anything plugged in. -- Regards, Tais M. Hansen ComX Networks A/S Tel: +45-70257474 Fax: +45-70257374 pgpBbG4BeTDZW.pgp Description: PGP signature ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Wed, 5 Jan 2005, Eric Bishop wrote: I will certainly try that. Please also let me know your progress.. Didn't help for me. I also tried removing one processor with no benefit. So I've now given up. Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Tue, 2005-01-04 at 17:05 +1100, Eric Bishop wrote: And I thought it was just me going crazy. I have the exact same issue on a HP-Compaq DL360 G4 server (1U rackmount version). I have tried everything that has been mentioned here and more. Even replaced the TE410P card (so know it's not the card). I have tried with FC2, FC3 and RHEL 3. Have tried kernel 2.4.X and 2.6.X. Have tried vanilla kernels and stock fedora kernels. Have tried every known BIOS tweak. I have tried a different card in the slot (firewire card) and that does show interrupts, but no matter what I do I can't get the TE410P to show any interrupts. Loading the zaptel driver appears to work but the lights on the TE410P just go off (rather than the normal blinking). My /proc/interrupts always looks as follows: If anyone has the solution to this I owe you big! [EMAIL PROTECTED] ~]# cat /proc/interrupts CPU0 0: 111005341IO-APIC-edge timer 1: 9IO-APIC-edge i8042 8: 1IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 12: 66IO-APIC-edge i8042 14: 7870IO-APIC-edge ide0 185: 0 IO-APIC-level t4xxp 193: 26141 IO-APIC-level cciss0 201:1139611 IO-APIC-level eth0 NMI: 0 LOC: 111010062 ERR: 0 MIS: 0 [EMAIL PROTECTED] ~]# Have also tried replacing the card, changinf PCI slots and messing with the BIOS all with the same result. If anyone can help I would be very grateful.. While browsing the Wiki, I found this bit of information. Maybe it will help you out some. http://www.voip-info.org/wiki-Asterisk+TE410p+No+Interrupts -- Steven Critchfield [EMAIL PROTECTED] ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Well it's clear now that this is not an isolated issue. Has anyone been in touch with Digium about this issue? I have logged a support issue with them, but thus far have not received a response. Anyone had better luck with Digium support and the Compaq/HP G4 server series? On Wed, 5 Jan 2005 18:05:22 +0100, Tais M. Hansen [EMAIL PROTECTED] wrote: On Monday 03 January 2005 19:34, [EMAIL PROTECTED] wrote: Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? We're struggeling with the same thing right now. We have several TE410Ps working on DL380G3s, but have so far been unsuccessful in getting it to work on the G4. Our G4 config is dual xeon 3.6ghz, 2gb ram, kernel 2.6.10 and 2.4.28. zaptel and wct4xxp modules loads fine. At this point the flashing red lights on the wct4xxp are turned off. zttool shows all spans are OK, no matter if there are anything plugged in. -- Regards, Tais M. Hansen ComX Networks A/S Tel: +45-70257474 Fax: +45-70257374 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
I really am at my wits end about this one. Some people report this card and server working fine while others (like myself) can't get it going no matter what. I have been told by the Digium distributor in our country that this card simply not compatible with some motherboards. Sounds very weak for such an expemsive card On Tue, 04 Jan 2005 17:15:54 +1100, Adam Goryachev [EMAIL PROTECTED] wrote: Just wondering, has anyone tried asking HP/Compaq about this problem? Since it *ONLY* shows up on their servers, and only on specific models, perhaps they cut one corner too many? Regards, Adam On Tue, 2005-01-04 at 17:05 +1100, Eric Bishop wrote: And I thought it was just me going crazy. I have the exact same issue on a HP-Compaq DL360 G4 server (1U rackmount version). I have tried everything that has been mentioned here and more. Even replaced the TE410P card (so know it's not the card). I have tried with FC2, FC3 and RHEL 3. Have tried kernel 2.4.X and 2.6.X. Have tried vanilla kernels and stock fedora kernels. Have tried every known BIOS tweak. I have tried a different card in the slot (firewire card) and that does show interrupts, but no matter what I do I can't get the TE410P to show any interrupts. Loading the zaptel driver appears to work but the lights on the TE410P just go off (rather than the normal blinking). My /proc/interrupts always looks as follows: If anyone has the solution to this I owe you big! On Tue, 4 Jan 2005 09:36:47 +1000, Joshua McAdam [EMAIL PROTECTED] wrote: I'm also having the same problem at the moment with a DL380 G4 SMP, I've tried Redhat 8.0, with smp and non smp stock 2.4 kernels and also a vanilla 2.4.22, SuSe 9.0 with smp and non smp stock 2.4 kernels. I've also tried SuSe 9.1 x86-64 (with 2.6 SMP Non SMP) with no success. I've tried with hyperthreading on and off, I/O Prefetch etc on and off within the BIOS - pretty much anything I thought could make a difference... I've also tried the card in all 3 PCI slots in the above configurations... Anyone got any other ideas? ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Tue, Jan 04, 2005 at 10:13:27PM +1100, Eric Bishop wrote: I really am at my wits end about this one. Some people report this card and server working fine while others (like myself) can't get it going no matter what. I have been told by the Digium distributor in our country that this card simply not compatible with some motherboards. Sounds very weak for such an expemsive card I have a 410 working in a DL360 fine (FC2) - had to get the right zaptel config or the system would crash, but once that was sorted all went fine. Steve -- NetTek Ltd Phone/Fax +44-(0)20 7483 2455 SMS steve-epage (at) gbnet.net [body] gpg 1024D/468952DB 2001-09-19 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
I really am at my wits end about this one. Some people report this card and server working fine while others (like myself) can't get it going no matter what. I have been told by the Digium distributor in our country that this card simply not compatible with some motherboards. Sounds very weak for such an expemsive card I have a 410 working in a DL360 fine (FC2) - had to get the right zaptel config or the system would crash, but once that was sorted all went fine. Steve I have been trying to get a span up from XO on a DL360 running Whitebox using the 410 card. The system had been acting normally but I was constantly in a Red alarm state. I had been using the Stable V1.0 branch of all sources having done a CVS update as late as 01/03/05. I went ahead and removed all libraries, executables, and modules and downloaded the current development branch from CVS last evening and my link is now established without alarm. The updates to libpri and zaptel in the CVS Head may well address other difficulties with newer systems/motherboards. Karl Putz ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
I gave up on an HP 1U server (hmm, I think it was a DL 140) It seemed like the E100 I tried to put in didn't play nice with the server monitoring ASIC on the MB. I tried several distros and kernels, and even installed HP's driver set for one (Suse I think). Same card and config worked fine in a plain Toshiba desktop, so that is where it is at the moment, T. On 4 Jan 2005, at 11:13, Eric Bishop wrote: I really am at my wits end about this one. Some people report this card and server working fine while others (like myself) can't get it going no matter what. I have been told by the Digium distributor in our country that this card simply not compatible with some motherboards. Sounds very weak for such an expemsive card On Tue, 04 Jan 2005 17:15:54 +1100, Adam Goryachev [EMAIL PROTECTED] wrote: Just wondering, has anyone tried asking HP/Compaq about this problem? Since it *ONLY* shows up on their servers, and only on specific models, perhaps they cut one corner too many? Regards, Adam On Tue, 2005-01-04 at 17:05 +1100, Eric Bishop wrote: And I thought it was just me going crazy. I have the exact same issue on a HP-Compaq DL360 G4 server (1U rackmount version). I have tried everything that has been mentioned here and more. Even replaced the TE410P card (so know it's not the card). I have tried with FC2, FC3 and RHEL 3. Have tried kernel 2.4.X and 2.6.X. Have tried vanilla kernels and stock fedora kernels. Have tried every known BIOS tweak. I have tried a different card in the slot (firewire card) and that does show interrupts, but no matter what I do I can't get the TE410P to show any interrupts. Loading the zaptel driver appears to work but the lights on the TE410P just go off (rather than the normal blinking). My /proc/interrupts always looks as follows: If anyone has the solution to this I owe you big! On Tue, 4 Jan 2005 09:36:47 +1000, Joshua McAdam [EMAIL PROTECTED] wrote: I'm also having the same problem at the moment with a DL380 G4 SMP, I've tried Redhat 8.0, with smp and non smp stock 2.4 kernels and also a vanilla 2.4.22, SuSe 9.0 with smp and non smp stock 2.4 kernels. I've also tried SuSe 9.1 x86-64 (with 2.6 SMP Non SMP) with no success. I've tried with hyperthreading on and off, I/O Prefetch etc on and off within the BIOS - pretty much anything I thought could make a difference... I've also tried the card in all 3 PCI slots in the above configurations... Anyone got any other ideas? ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Mon, 3 Jan 2005 [EMAIL PROTECTED] wrote: Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? Thanks for all the postings on this thread. I have a new and completely untested theory - the G4 has the option of a non-hotplug or a hotplug PCI riser cage. My new theory is that my problems with the TE410P have something to do with hotplug. Now I don't know what riser cage my customer ordered, but I see it has two slots with quick release clips holding the cards in, one with a screw. So just maybe the quick-release implies hotplug. I don't know much about PCI-Hotplug, but there's an option in the kernel config about having a Compaq PCI Hotplug controller. Do I have one of those?... I see some irq related stuff in the source of the compaq hotplug driver in the kernel - so perhaps I'm not loading that, or it doesn't work on the DL380 G4 right... Maybe even if I don't have the hotplug riser I still need this driver... Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Hi, Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? For me the card is detected fine, but the system just never sees an interrupt from the card. I've tried everything I can think of. The card definitely works. Its Fedora Core, but we also tried a stock 2.6.10 kernel. We tried with and without Hyperthreading, with noapic, we disabled all the hardware we could, etc etc... So - has anyone used this combination successfully? This customer has quite a thing for HP - so if the DL380 is going to be a problem, is there another rack-mount HP server that someone can vouch for with the TE410P? Thanks, Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Mon, 2005-01-03 at 20:34 +0200, [EMAIL PROTECTED] wrote: Hi, Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? For me the card is detected fine, but the system just never sees an interrupt from the card. I've tried everything I can think of. The card definitely works. Its Fedora Core, but we also tried a stock 2.6.10 kernel. We tried with and without Hyperthreading, with noapic, we disabled all the hardware we could, etc etc... So - has anyone used this combination successfully? This customer has quite a thing for HP - so if the DL380 is going to be a problem, is there another rack-mount HP server that someone can vouch for with the TE410P? Might want to check the archives, but I seem to remember a comment once before about having to go into the BIOS and provision an IRQ for the card before it will be seen properly. -- Steven Critchfield [EMAIL PROTECTED] ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Monday, January 03, 2005 1:35 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Hi, Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? For me the card is detected fine, but the system just never sees an interrupt from the card. I've tried everything I can think of. The card definitely works. Its Fedora Core, but we also tried a stock 2.6.10 kernel. We tried with and without Hyperthreading, with noapic, we disabled all the hardware we could, etc etc... So - has anyone used this combination successfully? This customer has quite a thing for HP - so if the DL380 is going to be a problem, is there another rack-mount HP server that someone can vouch for with the TE410P? I am using DL360 G3s with dual Xeon processors (Hyperthreading turned on) with no problems. I am running a Whitebox 2.4 kernel. Karl Putz Thanks, Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Mon, 3 Jan 2005, Steven Critchfield wrote: Might want to check the archives, but I seem to remember a comment once before about having to go into the BIOS and provision an IRQ for the card before it will be seen properly. Hi Steven, Thanks for the suggestion - there is a (unique) IRQ assigned, though I did see that the actual IRQ that Linux sees in the end is not the one I assigned (even with noapic). Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
I have 3 DL380 G4's in production, only difference that I can tell is that I am running a 2.4.22 kernel. Chris -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, January 03, 2005 11:35 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Hi, Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? For me the card is detected fine, but the system just never sees an interrupt from the card. I've tried everything I can think of. The card definitely works. Its Fedora Core, but we also tried a stock 2.6.10 kernel. We tried with and without Hyperthreading, with noapic, we disabled all the hardware we could, etc etc... So - has anyone used this combination successfully? This customer has quite a thing for HP - so if the DL380 is going to be a problem, is there another rack-mount HP server that someone can vouch for with the TE410P? Thanks, Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Mon, 3 Jan 2005, Chris Modesitt wrote: I have 3 DL380 G4's in production, only difference that I can tell is that I am running a 2.4.22 kernel. Great info - thanks. I'll try a 2.4.22 kernel in the morning. Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Mon, 3 Jan 2005, Scott Stingel wrote: Hi Steve- My customer has five DL320's and ten DL360's - all running asterisk with TE410P's with no problems - no 380's though. I'm using Fedora core 1 and 2.4.xxx kernel.. I'm assuming that you've done the correct initialization for the card: modprobe and ztcfg etc? Sounds like a 2.6 kernel issue if so. Hi Scott, Confident the config was done right - took zaptel.conf/zapata.conf off a tc2120 box in which the card works fine. We'll try a 2.4 kernel - thanks for your advice too! Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
HP servers are generally very solid machines. Are you running SMP? That could make a difference in IRQ behavior. Brian Greul Texas Shirt Company www.txshirts.com 713-802-0369 / 713-861-6261 (fax) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Monday, January 03, 2005 2:04 PM To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server On Mon, 3 Jan 2005, Scott Stingel wrote: Hi Steve- My customer has five DL320's and ten DL360's - all running asterisk with TE410P's with no problems - no 380's though. I'm using Fedora core 1 and 2.4.xxx kernel.. I'm assuming that you've done the correct initialization for the card: modprobe and ztcfg etc? Sounds like a 2.6 kernel issue if so. Hi Scott, Confident the config was done right - took zaptel.conf/zapata.conf off a tc2120 box in which the card works fine. We'll try a 2.4 kernel - thanks for your advice too! Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
On Mon, 3 Jan 2005 [EMAIL PROTECTED] wrote: HP servers are generally very solid machines. Are you running SMP? That could make a difference in IRQ behavior. I'm no Fedora Core expert,, but I tried both Fedora Core's single and smp kernels (they put the choice in Grub). Also built vanilla 2.6.10. Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
I'm also having the same problem at the moment with a DL380 G4 SMP, I've tried Redhat 8.0, with smp and non smp stock 2.4 kernels and also a vanilla 2.4.22, SuSe 9.0 with smp and non smp stock 2.4 kernels. I've also tried SuSe 9.1 x86-64 (with 2.6 SMP Non SMP) with no success. I've tried with hyperthreading on and off, I/O Prefetch etc on and off within the BIOS - pretty much anything I thought could make a difference... I've also tried the card in all 3 PCI slots in the above configurations... Anyone got any other ideas? Thanks Josh -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, 4 January 2005 6:22 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server On Mon, 3 Jan 2005 [EMAIL PROTECTED] wrote: HP servers are generally very solid machines. Are you running SMP? That could make a difference in IRQ behavior. I'm no Fedora Core expert,, but I tried both Fedora Core's single and smp kernels (they put the choice in Grub). Also built vanilla 2.6.10. Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
And I thought it was just me going crazy. I have the exact same issue on a HP-Compaq DL360 G4 server (1U rackmount version). I have tried everything that has been mentioned here and more. Even replaced the TE410P card (so know it's not the card). I have tried with FC2, FC3 and RHEL 3. Have tried kernel 2.4.X and 2.6.X. Have tried vanilla kernels and stock fedora kernels. Have tried every known BIOS tweak. I have tried a different card in the slot (firewire card) and that does show interrupts, but no matter what I do I can't get the TE410P to show any interrupts. Loading the zaptel driver appears to work but the lights on the TE410P just go off (rather than the normal blinking). My /proc/interrupts always looks as follows: If anyone has the solution to this I owe you big! [EMAIL PROTECTED] ~]# cat /proc/interrupts CPU0 0: 111005341IO-APIC-edge timer 1: 9IO-APIC-edge i8042 8: 1IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 12: 66IO-APIC-edge i8042 14: 7870IO-APIC-edge ide0 185: 0 IO-APIC-level t4xxp 193: 26141 IO-APIC-level cciss0 201:1139611 IO-APIC-level eth0 NMI: 0 LOC: 111010062 ERR: 0 MIS: 0 [EMAIL PROTECTED] ~]# Have also tried replacing the card, changinf PCI slots and messing with the BIOS all with the same result. If anyone can help I would be very grateful.. On Tue, 4 Jan 2005 09:36:47 +1000, Joshua McAdam [EMAIL PROTECTED] wrote: I'm also having the same problem at the moment with a DL380 G4 SMP, I've tried Redhat 8.0, with smp and non smp stock 2.4 kernels and also a vanilla 2.4.22, SuSe 9.0 with smp and non smp stock 2.4 kernels. I've also tried SuSe 9.1 x86-64 (with 2.6 SMP Non SMP) with no success. I've tried with hyperthreading on and off, I/O Prefetch etc on and off within the BIOS - pretty much anything I thought could make a difference... I've also tried the card in all 3 PCI slots in the above configurations... Anyone got any other ideas? Thanks Josh -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, 4 January 2005 6:22 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server On Mon, 3 Jan 2005 [EMAIL PROTECTED] wrote: HP servers are generally very solid machines. Are you running SMP? That could make a difference in IRQ behavior. I'm no Fedora Core expert,, but I tried both Fedora Core's single and smp kernels (they put the choice in Grub). Also built vanilla 2.6.10. Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
