Re: [Asterisk-Users] UK Caller ID - Asterisk 1.2.5 - TDM4 Card
On Thu, Mar 16, 2006 at 11:28:34PM -, Magnus Kelly wrote: Has any one found any issues (bug?) with ver 1.2.5 as CallerID generated on an outgoing FXS port (to the handset) fails when UK tones are used, with a message 'Didn't finish Caller-ID spill. Cancelling.' Any tips on getting this running ? Looked at Mantis, but only known bugs seem to relate to XP100 cards - not the TDM card. To re-iterate it works with Bell tones and US caller-id, but when you change to UK (and v23), fails with the above message. In Zapata.conf channel1 callerid=xxx 123 also fails if setting callerid in the dial-plan. Using 2 x TDM400 cards, zaptel 1.2.4 and Asterisk 1.2.5 Steve -- NetTek Ltd UK mob +44-(0)7775 755503 UK +44-(0)20 79932612 / US +1-(310)8577715 / Fax +44-(0)20 7483 2455 Skype/GoogleTalk/AIM/Gizmo stevekennedyuk / MSN [EMAIL PROTECTED] Euro Tech News Blog http://eurotechnews.blogspot.com ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] UK Caller ID - Asterisk 1.2.5 - TDM4 Card
Has any one found any issues (bug?) with ver 1.2.5 as CallerID generated on an outgoing FXS port (to the handset) fails when UK tones are used, with a message 'Didn't finish Caller-ID spill. Cancelling.' Any tips on getting this running ? Looked at Mantis, but only known bugs seem to relate to XP100 cards - not the TDM card. Thanks ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] UK Caller ID with TDM400P
Title: Message Has anyone here managed to get UK Caller ID (BT) working using a TDM400P card?. I've gotthe latest drivers from CVS, but can't find clarification if UK caller ID is supported and if so what the settings should be. Cheers Graham ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Uk Caller id
Hi, we had 3 analog lines but our telco did't pass us the caller-id so Asterisk tried to identify the caller-id but found bad data. Setting usecallerid=no avoided the Warning. Be sure your telco sends you the caller id. Giorgio Chris Thompson wrote: Hey Thanks for the response but still no luck. I'm a bit baffeled, i might try running some of the old versions + patch and stick in my old x100p cards to see what happens unless anyone has any great ideas? However I didn't really understand why i would use usecallerid=no when i do* want to use caller id. Cheers Chris - Original Message - From: Giorgio Incantalupo [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Friday, July 22, 2005 4:17 PM Subject: Re: [Asterisk-Users] Uk Caller id Hi, put usecallerid=no Giorgio Chris Thompson wrote: Hi I have my new TDM400P installed and working. I'm running from cvs HEAD with a 2.6.12 kernel on debian. I can't seem to get Caller id working (in uk with clid supplied and working to line) but am a bit unclear on the docs and hence assume it is something I am doing wrong. I would really* appreciate if anyone could take a look below at my zapata.conf and see is there anything incorrect. I am least convinced on the usecallerid=uk option, but if set to 'yes' i get Jul 22 15:38:47 ERROR[19569]: callerid.c:266 callerid_feed: fsk_serie made mylen 0 (-20) Jul 22 15:38:47 WARNING[19569]: chan_zap.c:5796 ss_thread: CallerID feed failed: Success Jul 22 15:38:47 WARNING[19569]: chan_zap.c:5840 ss_thread: CallerID returned with error on channel 'Zap/2-1' :: zapata.conf :: [channels] context=default switchtype=national signalling=fxo_ls rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=uk callerid=asreceived cidsignalling=v23 cidstart=usehist callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes group=1 callgroup=1 pickupgroup=1 immediate=no progzone=uk musiconhold=default ; incoming channels signalling=fxs_ks group=2 context=incoming channel = 1-2 ; outgoing channels signalling=fxo_ks group=1 context=outgoing channel = 3 Thanks loads Chris ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- GIORGIO INCANTALUPO Tel. +39 02 9350 4780 (104) FGA Software 20017 Rho - Via Puccini, 8 E-Mail : [EMAIL PROTECTED] Internet: http://www.fgasoftware.com ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Uk Caller id
Caller id is deffinately passed (checked by plugging phone straight into line). So its me + asterisk is the problem :) most likely my config. Cheers Chris - Original Message - From: Giorgio Incantalupo [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Monday, July 25, 2005 10:53 AM Subject: Re: [Asterisk-Users] Uk Caller id Hi, we had 3 analog lines but our telco did't pass us the caller-id so Asterisk tried to identify the caller-id but found bad data. Setting usecallerid=no avoided the Warning. Be sure your telco sends you the caller id. Giorgio Chris Thompson wrote: Hey Thanks for the response but still no luck. I'm a bit baffeled, i might try running some of the old versions + patch and stick in my old x100p cards to see what happens unless anyone has any great ideas? However I didn't really understand why i would use usecallerid=no when i do* want to use caller id. Cheers Chris - Original Message - From: Giorgio Incantalupo [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Friday, July 22, 2005 4:17 PM Subject: Re: [Asterisk-Users] Uk Caller id Hi, put usecallerid=no Giorgio Chris Thompson wrote: Hi I have my new TDM400P installed and working. I'm running from cvs HEAD with a 2.6.12 kernel on debian. I can't seem to get Caller id working (in uk with clid supplied and working to line) but am a bit unclear on the docs and hence assume it is something I am doing wrong. I would really* appreciate if anyone could take a look below at my zapata.conf and see is there anything incorrect. I am least convinced on the usecallerid=uk option, but if set to 'yes' i get Jul 22 15:38:47 ERROR[19569]: callerid.c:266 callerid_feed: fsk_serie made mylen 0 (-20) Jul 22 15:38:47 WARNING[19569]: chan_zap.c:5796 ss_thread: CallerID feed failed: Success Jul 22 15:38:47 WARNING[19569]: chan_zap.c:5840 ss_thread: CallerID returned with error on channel 'Zap/2-1' :: zapata.conf :: [channels] context=default switchtype=national signalling=fxo_ls rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=uk callerid=asreceived cidsignalling=v23 cidstart=usehist callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes group=1 callgroup=1 pickupgroup=1 immediate=no progzone=uk musiconhold=default ; incoming channels signalling=fxs_ks group=2 context=incoming channel = 1-2 ; outgoing channels signalling=fxo_ks group=1 context=outgoing channel = 3 Thanks loads Chris ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- GIORGIO INCANTALUPO Tel. +39 02 9350 4780 (104) FGA Software 20017 Rho - Via Puccini, 8 E-Mail : [EMAIL PROTECTED] Internet: http://www.fgasoftware.com ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Uk Caller id
Hiya, Just as a thought - I have caller ID provided by NTL (cable) and was getting 'bad data' - turned out that my A and B wires were wired the wrong way round on my 'home brew' lead. As soon as I reversed them - worked fine! Have a go - someone will correct me if I'm wrong but I had the card wired in wrong and it didn't stop anything from working or being blown so as a quick test ... Wayne. Giorgio Incantalupo wrote: Hi, we had 3 analog lines but our telco did't pass us the caller-id so Asterisk tried to identify the caller-id but found bad data. Setting usecallerid=no avoided the Warning. Be sure your telco sends you the caller id. Giorgio Chris Thompson wrote: Hey Thanks for the response but still no luck. I'm a bit baffeled, i might try running some of the old versions + patch and stick in my old x100p cards to see what happens unless anyone has any great ideas? However I didn't really understand why i would use usecallerid=no when i do* want to use caller id. Cheers Chris ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Uk Caller id
Hi I have my new TDM400P installed and working. I'm running from cvs HEAD with a 2.6.12 kernel on debian. I can't seem to get Caller id working (in uk with clid supplied and working to line) but am a bit unclear on the docs and hence assume it is something I am doing wrong. I would really* appreciate if anyone could take a look below at my zapata.conf and see is there anything incorrect. I am least convinced on the usecallerid=uk option, but if set to 'yes' i get Jul 22 15:38:47 ERROR[19569]: callerid.c:266 callerid_feed: fsk_serie made mylen 0 (-20)Jul 22 15:38:47 WARNING[19569]: chan_zap.c:5796 ss_thread: CallerID feed failed: SuccessJul 22 15:38:47 WARNING[19569]: chan_zap.c:5840 ss_thread: CallerID returned with error on channel 'Zap/2-1' :: zapata.conf :: [channels]context=defaultswitchtype=nationalsignalling=fxo_lsrxwink=300 ; Atlas seems to use long (250ms) winksusecallerid=ukcallerid=asreceivedcidsignalling=v23cidstart=usehistcallwaiting=yesusecallingpres=yescallwaitingcallerid=yesthreewaycalling=yestransfer=yescanpark=yescancallforward=yescallreturn=yesechocancel=yesechocancelwhenbridged=yesgroup=1callgroup=1pickupgroup=1immediate=noprogzone=ukmusiconhold=default ; incoming channels signalling=fxs_ksgroup=2context=incomingchannel = 1-2 ; outgoing channels signalling=fxo_ksgroup=1context=outgoingchannel = 3 Thanks loads Chris ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Uk Caller id
this is an italian code and works... try it. [channels] ; -- canale 4 -- language=en faxdetect=both musiconhold=default group=2 canpark=yes context=inbound signalling=fxs_ks usecallerid=no ; echo cancel echocancel=128 ; range from 32 to 256(=echo 100%) echocancelwhenbridged=yes ; yes = 400 msec echotraining=200 channel=4 Bruno De Luca Graziosi Chris Thompson wrote: Hi I have my new TDM400P installed and working. I'm running from cvs HEAD with a 2.6.12 kernel on debian. I can't seem to get Caller id working (in uk with clid supplied and working to line) but am a bit unclear on the docs and hence assume it is something I am doing wrong. I would really* appreciate if anyone could take a look below at my zapata.conf and see is there anything incorrect. I am least convinced on the usecallerid=uk option, but if set to 'yes' i get Jul 22 15:38:47 ERROR[19569]: callerid.c:266 callerid_feed: fsk_serie made mylen 0 (-20) Jul 22 15:38:47 WARNING[19569]: chan_zap.c:5796 ss_thread: CallerID feed failed: Success Jul 22 15:38:47 WARNING[19569]: chan_zap.c:5840 ss_thread: CallerID returned with error on channel 'Zap/2-1' :: zapata.conf :: [channels] context=default switchtype=national signalling=fxo_ls rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=uk callerid=asreceived cidsignalling=v23 cidstart=usehist callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes group=1 callgroup=1 pickupgroup=1 immediate=no progzone=uk musiconhold=default ; incoming channels signalling=fxs_ks group=2 context=incoming channel = 1-2 ; outgoing channels signalling=fxo_ks group=1 context=outgoing channel = 3 Thanks loads Chris ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users BRUNO DE LUCA Tel. +39 02 9350 4780 (102) FGA Software 20017 Rho - Via Puccini, 8 E-Mail : [EMAIL PROTECTED] Internet: http://www.fgasoftware.com ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Uk Caller id
Hey Thanks for the response but still no luck. I'm a bit baffeled, i might try running some of the old versions + patch and stick in my old x100p cards to see what happens unless anyone has any great ideas? However I didn't really understand why i would use usecallerid=no when i do* want to use caller id. Cheers Chris - Original Message - From: Giorgio Incantalupo [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Friday, July 22, 2005 4:17 PM Subject: Re: [Asterisk-Users] Uk Caller id Hi, put usecallerid=no Giorgio Chris Thompson wrote: Hi I have my new TDM400P installed and working. I'm running from cvs HEAD with a 2.6.12 kernel on debian. I can't seem to get Caller id working (in uk with clid supplied and working to line) but am a bit unclear on the docs and hence assume it is something I am doing wrong. I would really* appreciate if anyone could take a look below at my zapata.conf and see is there anything incorrect. I am least convinced on the usecallerid=uk option, but if set to 'yes' i get Jul 22 15:38:47 ERROR[19569]: callerid.c:266 callerid_feed: fsk_serie made mylen 0 (-20) Jul 22 15:38:47 WARNING[19569]: chan_zap.c:5796 ss_thread: CallerID feed failed: Success Jul 22 15:38:47 WARNING[19569]: chan_zap.c:5840 ss_thread: CallerID returned with error on channel 'Zap/2-1' :: zapata.conf :: [channels] context=default switchtype=national signalling=fxo_ls rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=uk callerid=asreceived cidsignalling=v23 cidstart=usehist callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes group=1 callgroup=1 pickupgroup=1 immediate=no progzone=uk musiconhold=default ; incoming channels signalling=fxs_ks group=2 context=incoming channel = 1-2 ; outgoing channels signalling=fxo_ks group=1 context=outgoing channel = 3 Thanks loads Chris ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Uk Caller id
that's correct :-) Bruno De Luca wrote: this is an italian code and works... try it. [channels] ; -- canale 4 -- language=en faxdetect=both musiconhold=default group=2 canpark=yes context=inbound signalling=fxs_ks usecallerid=no ; echo cancel echocancel=128 ; range from 32 to 256(=echo 100%) echocancelwhenbridged=yes ; yes = 400 msec echotraining=200 channel=4 Bruno De Luca Graziosi Chris Thompson wrote: Hi I have my new TDM400P installed and working. I'm running from cvs HEAD with a 2.6.12 kernel on debian. I can't seem to get Caller id working (in uk with clid supplied and working to line) but am a bit unclear on the docs and hence assume it is something I am doing wrong. I would really* appreciate if anyone could take a look below at my zapata.conf and see is there anything incorrect. I am least convinced on the usecallerid=uk option, but if set to 'yes' i get Jul 22 15:38:47 ERROR[19569]: callerid.c:266 callerid_feed: fsk_serie made mylen 0 (-20) Jul 22 15:38:47 WARNING[19569]: chan_zap.c:5796 ss_thread: CallerID feed failed: Success Jul 22 15:38:47 WARNING[19569]: chan_zap.c:5840 ss_thread: CallerID returned with error on channel 'Zap/2-1' :: zapata.conf :: [channels] context=default switchtype=national signalling=fxo_ls rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=uk callerid=asreceived cidsignalling=v23 cidstart=usehist callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes group=1 callgroup=1 pickupgroup=1 immediate=no progzone=uk musiconhold=default ; incoming channels signalling=fxs_ks group=2 context=incoming channel = 1-2 ; outgoing channels signalling=fxo_ks group=1 context=outgoing channel = 3 Thanks loads Chris ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users BRUNO DE LUCA Tel. +39 02 9350 4780 (102) FGA Software 20017 Rho - Via Puccini, 8 E-Mail : [EMAIL PROTECTED] Internet: http://www.fgasoftware.com ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users __ Informazione NOD32 1.1175 (20050721) __ Questo messaggio รจ stato controllato dal Sistema Antivirus NOD32 http://www.nod32.it -- Cheers Andrea Andrea Cristofanini CEO Gedam Europe S.r.l. CEO Gedam Advanced Communication LTD mobile : +39 3291871756 office : +39 011 5694900 www.gedameurope.com ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] uk caller id
Graham Turner [EMAIL PROTECTED] lazily top-posted: i have installed asterisk / zaptel from cvs distribution as of 17/09/04 so i assume this does it If you have a TDM/FXO then you'll need the latest CVS code. If you have a X100P then you'll need any CVS (the latest is usually a good choice) and some patches. I have the X100P running with today's CVS version and with UK (BT) Caller*ID support. have configured zapata.conf as per instruction but i would have expected to have seen the callerid on the asterisk console as it receives the call but then may be not ?? the relevant my extensions.conf is ; exten = s,1,answer exten = s,2,Dial(SIP/1001|10) it is quite possible that callerid is being seen by * but i would have expected it to have been echoed to the console or at least written to the CDR entries ??? There's no need to answer before dialling, btw. The SIP phone's answer will filter through the system. Aside from that, the (UK) Caller*ID will only be available if you have one of the setups described above (TDM with latest CVS code or X100P with patches). going a bit further on, the whole point of this exercise is to allow this CALLERID to be displayed on the console of a SIP peer (7940 ip phone) that is defined as an asterisk extension That will happen once you're set up, yes. -- _/ _/ _/_/_/_/ _/_/ _/_/_/ _/_/ _/_/_/ _/_/ _/_/_/_/_/ _/ K e v i n W a l s h _/ _/_/ _/ _/ _/_/ _/_/[EMAIL PROTECTED] _/ _/ _/_/_/_/ _/_/_/_/ _/_/ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] uk caller id
kevin, i will give the latest cvs of asterisk (and libpri / zaptel ) as seems good practice would you be happy to share with me (off topic if necessary) your zapata.conf (for X100P ??) GT - Original Message - From: Kevin Walsh [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion [EMAIL PROTECTED] Sent: Tuesday, September 21, 2004 10:41 AM Subject: RE: [Asterisk-Users] uk caller id Graham Turner [EMAIL PROTECTED] lazily top-posted: i have installed asterisk / zaptel from cvs distribution as of 17/09/04 so i assume this does it If you have a TDM/FXO then you'll need the latest CVS code. If you have a X100P then you'll need any CVS (the latest is usually a good choice) and some patches. I have the X100P running with today's CVS version and with UK (BT) Caller*ID support. have configured zapata.conf as per instruction but i would have expected to have seen the callerid on the asterisk console as it receives the call but then may be not ?? the relevant my extensions.conf is ; exten = s,1,answer exten = s,2,Dial(SIP/1001|10) it is quite possible that callerid is being seen by * but i would have expected it to have been echoed to the console or at least written to the CDR entries ??? There's no need to answer before dialling, btw. The SIP phone's answer will filter through the system. Aside from that, the (UK) Caller*ID will only be available if you have one of the setups described above (TDM with latest CVS code or X100P with patches). going a bit further on, the whole point of this exercise is to allow this CALLERID to be displayed on the console of a SIP peer (7940 ip phone) that is defined as an asterisk extension That will happen once you're set up, yes. -- _/ _/ _/_/_/_/ _/_/ _/_/_/ _/_/ _/_/_/ _/_/ _/_/_/_/_/ _/ K e v i n W a l s h _/ _/_/ _/ _/ _/_/ _/_/[EMAIL PROTECTED] _/ _/ _/_/_/_/ _/_/_/_/ _/_/ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] uk caller id
Graham Turner [EMAIL PROTECTED] wrote: dear all, i am looking to enable CALLERID on an Asterisk system comprising a X101P FXO interface connecting to BT PSTN in the uk seems this is supported by the interface but there seems to be varying information on how to enable it in zapata.conf 1. usecallerid=uk 2. ukcallerid=yes being two of the configuration statements offered The current method is usecallerid = uk. Of course, you need to patch Zaptel and Asterisk first. The ukcallerid = yes was used in an earlier version of the patch. -- _/ _/ _/_/_/_/ _/_/ _/_/_/ _/_/ _/_/_/ _/_/ _/_/_/_/_/ _/ K e v i n W a l s h _/ _/_/ _/ _/ _/_/ _/_/[EMAIL PROTECTED] _/ _/ _/_/_/_/ _/_/_/_/ _/_/ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] uk caller id
Kevin, thanks for post reply . i have installed asterisk / zaptel from cvs distribution as of 17/09/04 so i assume this does it have configured zapata.conf as per instruction but i would have expected to have seen the callerid on the asterisk console as it receives the call but then may be not ?? the relevant my extensions.conf is ; exten = s,1,answer exten = s,2,Dial(SIP/1001|10) it is quite possible that callerid is being seen by * but i would have expected it to have been echoed to the console or at least written to the CDR entries ??? would you have any suggestions as to how to confirm this going a bit further on, the whole point of this exercise is to allow this CALLERID to be displayed on the console of a SIP peer (7940 ip phone) that is defined as an asterisk extension thanks 4 yr help GT - Original Message - From: Kevin Walsh [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion [EMAIL PROTECTED] Sent: Sunday, September 19, 2004 1:48 PM Subject: RE: [Asterisk-Users] uk caller id Graham Turner [EMAIL PROTECTED] wrote: dear all, i am looking to enable CALLERID on an Asterisk system comprising a X101P FXO interface connecting to BT PSTN in the uk seems this is supported by the interface but there seems to be varying information on how to enable it in zapata.conf 1. usecallerid=uk 2. ukcallerid=yes being two of the configuration statements offered The current method is usecallerid = uk. Of course, you need to patch Zaptel and Asterisk first. The ukcallerid = yes was used in an earlier version of the patch. -- _/ _/ _/_/_/_/ _/_/ _/_/_/ _/_/ _/_/_/ _/_/ _/_/_/_/_/ _/ K e v i n W a l s h _/ _/_/ _/ _/ _/_/ _/_/[EMAIL PROTECTED] _/ _/ _/_/_/_/ _/_/_/_/ _/_/ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] uk caller id
dear all, i am looking to enable CALLERID on an Asterisk system comprising a X101P FXO interface connecting to BT PSTN in the uk seems this is supported by the interface but there seems to be varying information on how to enable it in zapata.conf 1. usecallerid=uk 2. ukcallerid=yes being two of the configuration statements offered TIA GT ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] UK Caller ID and X100p
Hi I really need caller id to work in the UK, I understand that the X100p uses a US chipset,two questions 1) is that a product that converts UK to US caller id in line Not really the answer you were looking for, but if you get a line from a non-BT supplier (e.g. NTL or Telewest) you are quite likely to find that CLI works. Linus ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] UK Caller ID and X100p
- Original Message - From: Linus Surguy [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, September 10, 2003 9:46 AM Subject: Re: [Asterisk-Users] UK Caller ID and X100p Hi I really need caller id to work in the UK, I understand that the X100p uses a US chipset,two questions 1) is that a product that converts UK to US caller id in line Not really the answer you were looking for, but if you get a line from a non-BT supplier (e.g. NTL or Telewest) you are quite likely to find that CLI works. Linus Hi, .. or if it is still FSK based, you can try to modify the callerid.c file and recompile * in order to work with your provider. See the list archive for details. BR, Dan ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] UK Caller ID and X100p
Hi I really need caller id to work in the UK, I understand that the X100p uses a US chipset,two questions 1) is that a product that converts UK to US caller id in line or 2) would it be possible to have modem that supports CID in parallel with the line and the x100p.The modem reads the line and reports the cid to asterisk Just thinking outloud Robb ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users