[asterisk-users] BRI/ISDN, misdn.conf/misdn-init.conf, OpenVOX B100P and Etisalat in Dubai
Hi All, We've got msidn configured: Port 1: TE-mode BRI S/T interface line (for phone lines) -> Protocol: DSS1 (Euro ISDN) -> childcnt: 2 mISDN_close: fid(3) isize(131072) inbuf(0x8fd5060) irp(0x8fd5060) iend(0x8fd5060) and running on Asterisk 1.4.21.2: pbx*CLI> misdn show stacks BEGIN STACK_LIST: * Port 1 Type TE Prot. PMP L2Link UP L1Link:UP Blocked:0 Debug:0 but I'm not sure how to check our settings are right with Etisalat, as above then goes to: pbx*CLI> misdn show stacks BEGIN STACK_LIST: * Port 1 Type TE Prot. PMP L2Link DOWN L1Link:DOWN Blocked:0 Debug:0 /etc/misdn-init.conf: card=1,hfcpci te_ptmp=1 poll=128 dsp_poll=128 dsp_options=0 dtmfthreshold=100 debug=0 /etc/asterisk/misdn.conf: [general] debug = 0 method=standard bridging=no stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh [default] context=misdn language=en musicclass=default senddtmf=yes far_alerting=no allowed_bearers=all nationalprefix=0 internationalprefix=00 rxgain=0 txgain=0 te_choose_channel=no pmp_l1_check=no reject_cause=16 need_more_infos=no nttimeout=no method=standard dialplan=0 localdialplan=0 cpndialplan=0 early_bconnect=yes incoming_early_audio=no nodialtone=no callgroup=1 pickupgroup=1 presentation=-1 screen=-1 echocancel=yes jitterbuffer=4000 jitterbuffer_upper_threshold=0 hdlc=no [isdn] ports=1 context=from-pstn msns=* Now we've setup PRi before, but not BRI and not in Dubai. If anyone has an idea or config that would be great and I'd make sure it goes on voip-info.org for others too. Thanks, Gavin. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] BRI/ISDN, misdn.conf/misdn-init.conf, OpenVOX B100P and Etisalat in Dubai
Hi Gavin, if you can make and receive calls it works...do not worry if your line is shown as DOWN, some telco turns it off but it works without problem. Remember to ask your telco for the right signalling and set it the right way (PTP or PMP). Giorgio Incantalupo Gavin Henry wrote: > Hi All, > > We've got msidn configured: > > Port 1: TE-mode BRI S/T interface line (for phone lines) > -> Protocol: DSS1 (Euro ISDN) > -> childcnt: 2 > > > mISDN_close: fid(3) isize(131072) inbuf(0x8fd5060) irp(0x8fd5060) > iend(0x8fd5060) > > > and running on Asterisk 1.4.21.2: > > pbx*CLI> misdn show stacks > BEGIN STACK_LIST: > * Port 1 Type TE Prot. PMP L2Link UP L1Link:UP Blocked:0 Debug:0 > > but I'm not sure how to check our settings are right with Etisalat, as > above then goes to: > > pbx*CLI> misdn show stacks > BEGIN STACK_LIST: > * Port 1 Type TE Prot. PMP L2Link DOWN L1Link:DOWN Blocked:0 Debug:0 > > /etc/misdn-init.conf: > > card=1,hfcpci > te_ptmp=1 > poll=128 > dsp_poll=128 > dsp_options=0 > dtmfthreshold=100 > debug=0 > > /etc/asterisk/misdn.conf: > > [general] > debug = 0 > method=standard > bridging=no > stop_tone_after_first_digit=yes > append_digits2exten=yes > dynamic_crypt=no > crypt_prefix=** > crypt_keys=test,muh > > [default] > context=misdn > language=en > musicclass=default > senddtmf=yes > far_alerting=no > allowed_bearers=all > nationalprefix=0 > internationalprefix=00 > rxgain=0 > txgain=0 > te_choose_channel=no > pmp_l1_check=no > reject_cause=16 > need_more_infos=no > nttimeout=no > method=standard > dialplan=0 > localdialplan=0 > cpndialplan=0 > early_bconnect=yes > incoming_early_audio=no > nodialtone=no > callgroup=1 > pickupgroup=1 > presentation=-1 > screen=-1 > echocancel=yes > jitterbuffer=4000 > jitterbuffer_upper_threshold=0 > hdlc=no > > [isdn] > ports=1 > context=from-pstn > msns=* > > > Now we've setup PRi before, but not BRI and not in Dubai. > > If anyone has an idea or config that would be great and I'd make sure > it goes on voip-info.org for others too. > > Thanks, > Gavin. > > ___ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] BRI/ISDN, misdn.conf/misdn-init.conf, OpenVOX B100P and Etisalat in Dubai
Gavin Henry wrote: > Hi All, > > We've got msidn configured: > > Port 1: TE-mode BRI S/T interface line (for phone lines) > -> Protocol: DSS1 (Euro ISDN) > -> childcnt: 2 > I don't know if it depends on the card, but in my case I need to set the termination jumper on TE mode for lines from PSTN. Mind to check the TE/NT jumper as well. > te_ptmp=1 > > (...) > > [isdn] > ports=1 > context=from-pstn > msns=* Here you have set PTMP, usually used with DID, and then you have MSN, usually used with PTP (at least here is how my telephone company use it). Find out if you use PTP or PTMP. Regards, Paulo Santos -- HTML e-mail is evil. Go plain text. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] BRI/ISDN, misdn.conf/misdn-init.conf, OpenVOX B100P and Etisalat in Dubai
2009/3/12 Paulo Santos : > Gavin Henry wrote: >> Hi All, >> >> We've got msidn configured: >> >> Port 1: TE-mode BRI S/T interface line (for phone lines) >> -> Protocol: DSS1 (Euro ISDN) >> -> childcnt: 2 >> > > I don't know if it depends on the card, but in my case I need to set the > termination jumper on TE mode for lines from PSTN. Mind to check the > TE/NT jumper as well. > > >> te_ptmp=1 >> >> (...) >> >> [isdn] >> ports=1 >> context=from-pstn >> msns=* Everything worked first time, so thanks! ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] BRI/ISDN, misdn.conf/misdn-init.conf, OpenVOX B100P and Etisalat in Dubai
2009/3/12 Giorgio Incantalupo : > Hi Gavin, > > if you can make and receive calls it works...do not worry if your line > is shown as DOWN, some telco turns it off but it works without problem. > Remember to ask your telco for the right signalling and set it the right > way (PTP or PMP). Thanks. It's all working with above, I just hadn't tested an inbound call. Pretty lucky really ;-) ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users