RE: [Asterisk-Users] 2 X100Ps give error
I moved the cards to different PCI slots and all is well. Thank you Sergio for your help. cameron. On Fri, 31 Oct 2003, Cameron Palmer wrote: > It looks like they have their own IRQ 10 and 11. > > cameron. > > On Fri, 31 Oct 2003, Sergio Serrano Revuelto wrote: > > > Try to do cat /proc/pci. You must verify that card doesn't share IRQ > > with USB or other component. > > > > > > srsergio > > > > > > > > > > -Mensaje original- > > De: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] En nombre de Cameron > > Palmer > > Enviado el: viernes, 31 de octubre de 2003 8:32 > > Para: [EMAIL PROTECTED] > > Asunto: RE: [Asterisk-Users] 2 X100Ps give error > > > > > > > > RESULTS of your suggestion. I had tried similar variations from the > > mailing list archives the result was the same. > > > > # modprobe wcfxo > > ZT_CHANCONFIG failed on channel 2: No such device or address (6) > > /lib/modules/2.4.22/misc/wcfxo.o: post-install wcfxo failed > > /lib/modules/2.4.22/misc/wcfxo.o: insmod wcfxo failed > > > > # ztcfg - > > Zaptel Configuration > > == > > > > Channel map: > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > > Channel 02: FXS Kewlstart (Default) (Slaves: 02) > > > > 2 channels configured. > > > > ZT_CHANCONFIG failed on channel 2: No such device or address (6) > > > > > > cameron. > > > > > > On Fri, 31 Oct 2003, Sergio Serrano Revuelto wrote: > > > > > Try to load module manually: modprobe wcfxo; ztcfg - > > > > > > srsergio > > > > > > > > > > > > > > > -Mensaje original- > > > De: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] En nombre de Cameron > > > Palmer Enviado el: viernes, 31 de octubre de 2003 6:27 > > > Para: [EMAIL PROTECTED] > > > Asunto: [Asterisk-Users] 2 X100Ps give error > > > > > > > > > I have two X100Ps in my zaptel.conf and have it configured: > > > > > > fxsks=1-2 > > > > > > When starting rc.zaptel I get the error: > > > > > > Loading zaptel framework... > > > Loading zaptel hardware modules: wcfxo wcusb > > > Running ztcfg... > > > ZT_CHANCONFIG failed on channel 2: No such device or address (6) > > > > > > As far as I can tell from the archived mailing lists I shouldn't have > > > this problem. > > > > > > I do notice a difference in lspci which concerns me: > > > > > > 00:0d.0 Communication controller: Tiger Jet Network Inc. Intel 537 > > > 00:0e.0 Serial controller: Tiger Jet Network Inc. Intel 537 > > > > > > Why is one listed as a Communication controller and the other a serial > > > controller? > > > > > > What I'm trying to do... > > > I have activated the second line option and put it into a call hunt > > > with > > > > > > the first line on my Vonage account. At the office I have a Konexx DWI > > > connecting my Nortel phone to my desktop running RedHat and a X100P. > > My > > > goal is seamless (as far as my boss in Santa Cruz can tell) > > connectivity > > > > > > between home and office but maintaining a low ongoing cost. Namely > > > about > > > > > > $60 per month. > > > > > > Other details... > > > > > > The home setup - > > > 2 7960G SIP phones > > > 1 ATA-186 > > > Linux (slackware 9.1) 2.4.22 on PIII 650MHz > > > Connected to Vonage over the POTS. > > > 2 X100P FXO Cards > > > > > > The office setup - > > > Dell Precision 650 > > > Redhat 9 > > > 1 X100P FXO Card > > > Konexx DWI connected to Nortel phone > > > > > > ___ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > ___ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > ___ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > ___ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] 2 X100Ps give error
It looks like they have their own IRQ 10 and 11. cameron. On Fri, 31 Oct 2003, Sergio Serrano Revuelto wrote: > Try to do cat /proc/pci. You must verify that card doesn't share IRQ > with USB or other component. > > > srsergio > > > > > -Mensaje original- > De: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] En nombre de Cameron > Palmer > Enviado el: viernes, 31 de octubre de 2003 8:32 > Para: [EMAIL PROTECTED] > Asunto: RE: [Asterisk-Users] 2 X100Ps give error > > > > RESULTS of your suggestion. I had tried similar variations from the > mailing list archives the result was the same. > > # modprobe wcfxo > ZT_CHANCONFIG failed on channel 2: No such device or address (6) > /lib/modules/2.4.22/misc/wcfxo.o: post-install wcfxo failed > /lib/modules/2.4.22/misc/wcfxo.o: insmod wcfxo failed > > # ztcfg - > Zaptel Configuration > == > > Channel map: > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > Channel 02: FXS Kewlstart (Default) (Slaves: 02) > > 2 channels configured. > > ZT_CHANCONFIG failed on channel 2: No such device or address (6) > > > cameron. > > > On Fri, 31 Oct 2003, Sergio Serrano Revuelto wrote: > > > Try to load module manually: modprobe wcfxo; ztcfg - > > > > srsergio > > > > > > > > > > -Mensaje original- > > De: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] En nombre de Cameron > > Palmer Enviado el: viernes, 31 de octubre de 2003 6:27 > > Para: [EMAIL PROTECTED] > > Asunto: [Asterisk-Users] 2 X100Ps give error > > > > > > I have two X100Ps in my zaptel.conf and have it configured: > > > > fxsks=1-2 > > > > When starting rc.zaptel I get the error: > > > > Loading zaptel framework... > > Loading zaptel hardware modules: wcfxo wcusb > > Running ztcfg... > > ZT_CHANCONFIG failed on channel 2: No such device or address (6) > > > > As far as I can tell from the archived mailing lists I shouldn't have > > this problem. > > > > I do notice a difference in lspci which concerns me: > > > > 00:0d.0 Communication controller: Tiger Jet Network Inc. Intel 537 > > 00:0e.0 Serial controller: Tiger Jet Network Inc. Intel 537 > > > > Why is one listed as a Communication controller and the other a serial > > controller? > > > > What I'm trying to do... > > I have activated the second line option and put it into a call hunt > > with > > > > the first line on my Vonage account. At the office I have a Konexx DWI > > connecting my Nortel phone to my desktop running RedHat and a X100P. > My > > goal is seamless (as far as my boss in Santa Cruz can tell) > connectivity > > > > between home and office but maintaining a low ongoing cost. Namely > > about > > > > $60 per month. > > > > Other details... > > > > The home setup - > > 2 7960G SIP phones > > 1 ATA-186 > > Linux (slackware 9.1) 2.4.22 on PIII 650MHz > > Connected to Vonage over the POTS. > > 2 X100P FXO Cards > > > > The office setup - > > Dell Precision 650 > > Redhat 9 > > 1 X100P FXO Card > > Konexx DWI connected to Nortel phone > > > > ___ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > ___ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] 2 X100Ps give error
Try to do cat /proc/pci. You must verify that card doesn't share IRQ with USB or other component. srsergio -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de Cameron Palmer Enviado el: viernes, 31 de octubre de 2003 8:32 Para: [EMAIL PROTECTED] Asunto: RE: [Asterisk-Users] 2 X100Ps give error RESULTS of your suggestion. I had tried similar variations from the mailing list archives the result was the same. # modprobe wcfxo ZT_CHANCONFIG failed on channel 2: No such device or address (6) /lib/modules/2.4.22/misc/wcfxo.o: post-install wcfxo failed /lib/modules/2.4.22/misc/wcfxo.o: insmod wcfxo failed # ztcfg - Zaptel Configuration == Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) 2 channels configured. ZT_CHANCONFIG failed on channel 2: No such device or address (6) cameron. On Fri, 31 Oct 2003, Sergio Serrano Revuelto wrote: > Try to load module manually: modprobe wcfxo; ztcfg - > > srsergio > > > > > -Mensaje original- > De: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] En nombre de Cameron > Palmer Enviado el: viernes, 31 de octubre de 2003 6:27 > Para: [EMAIL PROTECTED] > Asunto: [Asterisk-Users] 2 X100Ps give error > > > I have two X100Ps in my zaptel.conf and have it configured: > > fxsks=1-2 > > When starting rc.zaptel I get the error: > > Loading zaptel framework... > Loading zaptel hardware modules: wcfxo wcusb > Running ztcfg... > ZT_CHANCONFIG failed on channel 2: No such device or address (6) > > As far as I can tell from the archived mailing lists I shouldn't have > this problem. > > I do notice a difference in lspci which concerns me: > > 00:0d.0 Communication controller: Tiger Jet Network Inc. Intel 537 > 00:0e.0 Serial controller: Tiger Jet Network Inc. Intel 537 > > Why is one listed as a Communication controller and the other a serial > controller? > > What I'm trying to do... > I have activated the second line option and put it into a call hunt > with > > the first line on my Vonage account. At the office I have a Konexx DWI > connecting my Nortel phone to my desktop running RedHat and a X100P. My > goal is seamless (as far as my boss in Santa Cruz can tell) connectivity > > between home and office but maintaining a low ongoing cost. Namely > about > > $60 per month. > > Other details... > > The home setup - > 2 7960G SIP phones > 1 ATA-186 > Linux (slackware 9.1) 2.4.22 on PIII 650MHz > Connected to Vonage over the POTS. > 2 X100P FXO Cards > > The office setup - > Dell Precision 650 > Redhat 9 > 1 X100P FXO Card > Konexx DWI connected to Nortel phone > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] 2 X100Ps give error
RESULTS of your suggestion. I had tried similar variations from the mailing list archives the result was the same. # modprobe wcfxo ZT_CHANCONFIG failed on channel 2: No such device or address (6) /lib/modules/2.4.22/misc/wcfxo.o: post-install wcfxo failed /lib/modules/2.4.22/misc/wcfxo.o: insmod wcfxo failed # ztcfg - Zaptel Configuration == Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) 2 channels configured. ZT_CHANCONFIG failed on channel 2: No such device or address (6) cameron. On Fri, 31 Oct 2003, Sergio Serrano Revuelto wrote: > Try to load module manually: modprobe wcfxo; ztcfg - > > srsergio > > > > > -Mensaje original- > De: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] En nombre de Cameron > Palmer > Enviado el: viernes, 31 de octubre de 2003 6:27 > Para: [EMAIL PROTECTED] > Asunto: [Asterisk-Users] 2 X100Ps give error > > > I have two X100Ps in my zaptel.conf and have it configured: > > fxsks=1-2 > > When starting rc.zaptel I get the error: > > Loading zaptel framework... > Loading zaptel hardware modules: wcfxo wcusb > Running ztcfg... > ZT_CHANCONFIG failed on channel 2: No such device or address (6) > > As far as I can tell from the archived mailing lists I shouldn't have > this > problem. > > I do notice a difference in lspci which concerns me: > > 00:0d.0 Communication controller: Tiger Jet Network Inc. Intel 537 > 00:0e.0 Serial controller: Tiger Jet Network Inc. Intel 537 > > Why is one listed as a Communication controller and the other a serial > controller? > > What I'm trying to do... > I have activated the second line option and put it into a call hunt with > > the first line on my Vonage account. At the office I have a Konexx DWI > connecting my Nortel phone to my desktop running RedHat and a X100P. My > goal is seamless (as far as my boss in Santa Cruz can tell) connectivity > > between home and office but maintaining a low ongoing cost. Namely about > > $60 per month. > > Other details... > > The home setup - > 2 7960G SIP phones > 1 ATA-186 > Linux (slackware 9.1) 2.4.22 on PIII 650MHz > Connected to Vonage over the POTS. > 2 X100P FXO Cards > > The office setup - > Dell Precision 650 > Redhat 9 > 1 X100P FXO Card > Konexx DWI connected to Nortel phone > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] 2 X100Ps give error
Try to load module manually: modprobe wcfxo; ztcfg - srsergio -Mensaje original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de Cameron Palmer Enviado el: viernes, 31 de octubre de 2003 6:27 Para: [EMAIL PROTECTED] Asunto: [Asterisk-Users] 2 X100Ps give error I have two X100Ps in my zaptel.conf and have it configured: fxsks=1-2 When starting rc.zaptel I get the error: Loading zaptel framework... Loading zaptel hardware modules: wcfxo wcusb Running ztcfg... ZT_CHANCONFIG failed on channel 2: No such device or address (6) As far as I can tell from the archived mailing lists I shouldn't have this problem. I do notice a difference in lspci which concerns me: 00:0d.0 Communication controller: Tiger Jet Network Inc. Intel 537 00:0e.0 Serial controller: Tiger Jet Network Inc. Intel 537 Why is one listed as a Communication controller and the other a serial controller? What I'm trying to do... I have activated the second line option and put it into a call hunt with the first line on my Vonage account. At the office I have a Konexx DWI connecting my Nortel phone to my desktop running RedHat and a X100P. My goal is seamless (as far as my boss in Santa Cruz can tell) connectivity between home and office but maintaining a low ongoing cost. Namely about $60 per month. Other details... The home setup - 2 7960G SIP phones 1 ATA-186 Linux (slackware 9.1) 2.4.22 on PIII 650MHz Connected to Vonage over the POTS. 2 X100P FXO Cards The office setup - Dell Precision 650 Redhat 9 1 X100P FXO Card Konexx DWI connected to Nortel phone ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
