Re: [Asterisk-Users] '#' doesn't work for me
Hi Brian, ATA is in SIP mode, and RFC2833 is used. Something else to check? Thanks, Dan - Original Message - From: "Brian West" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, August 14, 2003 6:16 PM Subject: Re: [Asterisk-Users] '#' doesn't work for me > Accually it will work with any codec if you use rfc2833. G711 is only > needed if you are passing DTMF inband. > > bkw > > On Thu, 14 Aug 2003, Martin Pycko wrote: > > > It works only with G711 (ulaw/alaw) > > > > regards > > Martin > > > > On Thu, 14 Aug 2003, Dan wrote: > > > > > Hi, > > > > > > I cannot use '#' to initiate transfers. > > > I have tried on different phones (7960, ATA, X-Lite). > > > When I press '#' during a call, nothing happen. > > > I have both T and t switches in Dial application. > > > The transfer function works with Flash key on ATA, but in a very strange > > > wayThe final destination is hunged up and then automatically called by > > > the initial caller... This behavior request to put on hook the phone > > > connected to the ATA in order to accept the transfer. During this period the > > > phone is busy for the caller, so I must use some tricks in the dialing macro > > > in order to acomodate this. > > > > > > Any other suggestions to better solve the transfer function? > > > > > > > > > BR, > > > Dan > > > > > > ___ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > ___ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] '#' doesn't work for me
Accually it will work with any codec if you use rfc2833. G711 is only needed if you are passing DTMF inband. bkw On Thu, 14 Aug 2003, Martin Pycko wrote: > It works only with G711 (ulaw/alaw) > > regards > Martin > > On Thu, 14 Aug 2003, Dan wrote: > > > Hi, > > > > I cannot use '#' to initiate transfers. > > I have tried on different phones (7960, ATA, X-Lite). > > When I press '#' during a call, nothing happen. > > I have both T and t switches in Dial application. > > The transfer function works with Flash key on ATA, but in a very strange > > wayThe final destination is hunged up and then automatically called by > > the initial caller... This behavior request to put on hook the phone > > connected to the ATA in order to accept the transfer. During this period the > > phone is busy for the caller, so I must use some tricks in the dialing macro > > in order to acomodate this. > > > > Any other suggestions to better solve the transfer function? > > > > > > BR, > > Dan > > > > ___ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] '#' doesn't work for me
Hi Martin, I use ATA-186 (G.711) with two analog phones. I can transfer using Flash, but nothing happen when press on '#'... There is something else I have to check? Thanks, Dan - Original Message - From: "Martin Pycko" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, August 14, 2003 5:56 PM Subject: Re: [Asterisk-Users] '#' doesn't work for me > It works only with G711 (ulaw/alaw) > > regards > Martin > > On Thu, 14 Aug 2003, Dan wrote: > > > Hi, > > > > I cannot use '#' to initiate transfers. > > I have tried on different phones (7960, ATA, X-Lite). > > When I press '#' during a call, nothing happen. > > I have both T and t switches in Dial application. > > The transfer function works with Flash key on ATA, but in a very strange > > wayThe final destination is hunged up and then automatically called by > > the initial caller... This behavior request to put on hook the phone > > connected to the ATA in order to accept the transfer. During this period the > > phone is busy for the caller, so I must use some tricks in the dialing macro > > in order to acomodate this. > > > > Any other suggestions to better solve the transfer function? > > > > > > BR, > > Dan > > > > ___ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] '#' doesn't work for me
http://www.bkw.org/~brian/ata.html Pay attention to connectmode and audiomode Its how I set it up and it works. bkw On Thu, 14 Aug 2003, Dan wrote: > Hi Brian, > > ATA is in SIP mode, and RFC2833 is used. > Something else to check? > > Thanks, > Dan > > > - Original Message - > From: "Brian West" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, August 14, 2003 6:16 PM > Subject: Re: [Asterisk-Users] '#' doesn't work for me > > > > Accually it will work with any codec if you use rfc2833. G711 is only > > needed if you are passing DTMF inband. > > > > bkw > > > > On Thu, 14 Aug 2003, Martin Pycko wrote: > > > > > It works only with G711 (ulaw/alaw) > > > > > > regards > > > Martin > > > > > > On Thu, 14 Aug 2003, Dan wrote: > > > > > > > Hi, > > > > > > > > I cannot use '#' to initiate transfers. > > > > I have tried on different phones (7960, ATA, X-Lite). > > > > When I press '#' during a call, nothing happen. > > > > I have both T and t switches in Dial application. > > > > The transfer function works with Flash key on ATA, but in a very > strange > > > > wayThe final destination is hunged up and then automatically > called by > > > > the initial caller... This behavior request to put on hook the phone > > > > connected to the ATA in order to accept the transfer. During this > period the > > > > phone is busy for the caller, so I must use some tricks in the dialing > macro > > > > in order to acomodate this. > > > > > > > > Any other suggestions to better solve the transfer function? > > > > > > > > > > > > BR, > > > > Dan > > > > > > > > ___ > > > > Asterisk-Users mailing list > > > > [EMAIL PROTECTED] > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > ___ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > ___ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] '#' doesn't work for me
And remember to use Dial with t option Martin On Thu, 14 Aug 2003, Brian West wrote: > http://www.bkw.org/~brian/ata.html > > Pay attention to connectmode and audiomode Its how I set it up and it > works. > > bkw > > On Thu, 14 Aug 2003, Dan wrote: > > > Hi Brian, > > > > ATA is in SIP mode, and RFC2833 is used. > > Something else to check? > > > > Thanks, > > Dan > > > > > > - Original Message - > > From: "Brian West" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Thursday, August 14, 2003 6:16 PM > > Subject: Re: [Asterisk-Users] '#' doesn't work for me > > > > > > > Accually it will work with any codec if you use rfc2833. G711 is only > > > needed if you are passing DTMF inband. > > > > > > bkw > > > > > > On Thu, 14 Aug 2003, Martin Pycko wrote: > > > > > > > It works only with G711 (ulaw/alaw) > > > > > > > > regards > > > > Martin > > > > > > > > On Thu, 14 Aug 2003, Dan wrote: > > > > > > > > > Hi, > > > > > > > > > > I cannot use '#' to initiate transfers. > > > > > I have tried on different phones (7960, ATA, X-Lite). > > > > > When I press '#' during a call, nothing happen. > > > > > I have both T and t switches in Dial application. > > > > > The transfer function works with Flash key on ATA, but in a very > > strange > > > > > wayThe final destination is hunged up and then automatically > > called by > > > > > the initial caller... This behavior request to put on hook the phone > > > > > connected to the ATA in order to accept the transfer. During this > > period the > > > > > phone is busy for the caller, so I must use some tricks in the dialing > > macro > > > > > in order to acomodate this. > > > > > > > > > > Any other suggestions to better solve the transfer function? > > > > > > > > > > > > > > > BR, > > > > > Dan > > > > > > > > > > ___ > > > > > Asterisk-Users mailing list > > > > > [EMAIL PROTECTED] > > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > > > > ___ > > > > Asterisk-Users mailing list > > > > [EMAIL PROTECTED] > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > ___ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > > > ___ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] '#' doesn't work for me
Ya what he said! :P On Thu, 14 Aug 2003, Martin Pycko wrote: > And remember to use Dial with t option > > Martin > > On Thu, 14 Aug 2003, Brian West wrote: > > > http://www.bkw.org/~brian/ata.html > > > > Pay attention to connectmode and audiomode Its how I set it up and it > > works. > > > > bkw > > > > On Thu, 14 Aug 2003, Dan wrote: > > > > > Hi Brian, > > > > > > ATA is in SIP mode, and RFC2833 is used. > > > Something else to check? > > > > > > Thanks, > > > Dan > > > > > > > > > ----- Original Message - > > > From: "Brian West" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Thursday, August 14, 2003 6:16 PM > > > Subject: Re: [Asterisk-Users] '#' doesn't work for me > > > > > > > > > > Accually it will work with any codec if you use rfc2833. G711 is only > > > > needed if you are passing DTMF inband. > > > > > > > > bkw > > > > > > > > On Thu, 14 Aug 2003, Martin Pycko wrote: > > > > > > > > > It works only with G711 (ulaw/alaw) > > > > > > > > > > regards > > > > > Martin > > > > > > > > > > On Thu, 14 Aug 2003, Dan wrote: > > > > > > > > > > > Hi, > > > > > > > > > > > > I cannot use '#' to initiate transfers. > > > > > > I have tried on different phones (7960, ATA, X-Lite). > > > > > > When I press '#' during a call, nothing happen. > > > > > > I have both T and t switches in Dial application. > > > > > > The transfer function works with Flash key on ATA, but in a very > > > strange > > > > > > wayThe final destination is hunged up and then automatically > > > called by > > > > > > the initial caller... This behavior request to put on hook the phone > > > > > > connected to the ATA in order to accept the transfer. During this > > > period the > > > > > > phone is busy for the caller, so I must use some tricks in the dialing > > > macro > > > > > > in order to acomodate this. > > > > > > > > > > > > Any other suggestions to better solve the transfer function? > > > > > > > > > > > > > > > > > > BR, > > > > > > Dan > > > > > > > > > > > > ___ > > > > > > Asterisk-Users mailing list > > > > > > [EMAIL PROTECTED] > > > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > > > > > > > ___ > > > > > Asterisk-Users mailing list > > > > > [EMAIL PROTECTED] > > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > ___ > > > > Asterisk-Users mailing list > > > > [EMAIL PROTECTED] > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > > > > > > > > ___ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > ___ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] '#' doesn't work for me
It works only with G711 (ulaw/alaw) regards Martin On Thu, 14 Aug 2003, Dan wrote: > Hi, > > I cannot use '#' to initiate transfers. > I have tried on different phones (7960, ATA, X-Lite). > When I press '#' during a call, nothing happen. > I have both T and t switches in Dial application. > The transfer function works with Flash key on ATA, but in a very strange > wayThe final destination is hunged up and then automatically called by > the initial caller... This behavior request to put on hook the phone > connected to the ATA in order to accept the transfer. During this period the > phone is busy for the caller, so I must use some tricks in the dialing macro > in order to acomodate this. > > Any other suggestions to better solve the transfer function? > > > BR, > Dan > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] '#' doesn't work for me
Hi Brain, Strange, but changing the parameter ConnectMode from 0x0060400 to 0x00460400 solve this issue. But even more strange is that I have tried to change it back and it still works..?!?! Now I have another problem. Using '#' and trying to transfer the call to 701 (parking) it is transfered, the parking number is told, music on hold is started on the other partybut.. then the other party is hanged up.. I have 'Ttr' as switches in the Dial command. Thanks, Dan - Original Message - From: "Brian West" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, August 14, 2003 9:25 PM Subject: Re: [Asterisk-Users] '#' doesn't work for me > http://www.bkw.org/~brian/ata.html > > Pay attention to connectmode and audiomode Its how I set it up and it > works. > > bkw > > On Thu, 14 Aug 2003, Dan wrote: > > > Hi Brian, > > > > ATA is in SIP mode, and RFC2833 is used. > > Something else to check? > > > > Thanks, > > Dan > > > > > > - Original Message ----- > > From: "Brian West" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Thursday, August 14, 2003 6:16 PM > > Subject: Re: [Asterisk-Users] '#' doesn't work for me > > > > > > > Accually it will work with any codec if you use rfc2833. G711 is only > > > needed if you are passing DTMF inband. > > > > > > bkw > > > > > > On Thu, 14 Aug 2003, Martin Pycko wrote: > > > > > > > It works only with G711 (ulaw/alaw) > > > > > > > > regards > > > > Martin > > > > > > > > On Thu, 14 Aug 2003, Dan wrote: > > > > > > > > > Hi, > > > > > > > > > > I cannot use '#' to initiate transfers. > > > > > I have tried on different phones (7960, ATA, X-Lite). > > > > > When I press '#' during a call, nothing happen. > > > > > I have both T and t switches in Dial application. > > > > > The transfer function works with Flash key on ATA, but in a very > > strange > > > > > wayThe final destination is hunged up and then automatically > > called by > > > > > the initial caller... This behavior request to put on hook the phone > > > > > connected to the ATA in order to accept the transfer. During this > > period the > > > > > phone is busy for the caller, so I must use some tricks in the dialing > > macro > > > > > in order to acomodate this. > > > > > > > > > > Any other suggestions to better solve the transfer function? > > > > > > > > > > > > > > > BR, > > > > > Dan > > > > > > > > > > ___ > > > > > Asterisk-Users mailing list > > > > > [EMAIL PROTECTED] > > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > > > > ___ > > > > Asterisk-Users mailing list > > > > [EMAIL PROTECTED] > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > ___ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > > > ___ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] '#' doesn't work for me
Well I wasn't sure :) But if it works than it works :) Martin On Thu, 14 Aug 2003, Brian West wrote: > Accually it will work with any codec if you use rfc2833. G711 is only > needed if you are passing DTMF inband. > > bkw > > On Thu, 14 Aug 2003, Martin Pycko wrote: > > > It works only with G711 (ulaw/alaw) > > > > regards > > Martin > > > > On Thu, 14 Aug 2003, Dan wrote: > > > > > Hi, > > > > > > I cannot use '#' to initiate transfers. > > > I have tried on different phones (7960, ATA, X-Lite). > > > When I press '#' during a call, nothing happen. > > > I have both T and t switches in Dial application. > > > The transfer function works with Flash key on ATA, but in a very strange > > > wayThe final destination is hunged up and then automatically called by > > > the initial caller... This behavior request to put on hook the phone > > > connected to the ATA in order to accept the transfer. During this period the > > > phone is busy for the caller, so I must use some tricks in the dialing macro > > > in order to acomodate this. > > > > > > Any other suggestions to better solve the transfer function? > > > > > > > > > BR, > > > Dan > > > > > > ___ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > ___ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] '#' doesn't work for me
Do you have transfer turn on in zapata.conf? transfer=yes Hi, I cannot use '#' to initiate transfers. I have tried on different phones (7960, ATA, X-Lite). When I press '#' during a call, nothing happen. I have both T and t switches in Dial application. The transfer function works with Flash key on ATA, but in a very strange wayThe final destination is hunged up and then automatically called by the initial caller... This behavior request to put on hook the phone connected to the ATA in order to accept the transfer. During this period the phone is busy for the caller, so I must use some tricks in the dialing macro in order to acomodate this. Any other suggestions to better solve the transfer function? BR, Dan ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] '#' doesn't work for me
Hi, The problem was not related to ZAP channel. Even between two local SIP phone was the same. I have solve it just changing something in the ATA configuration and then butting back the old value. I still don't know the cause. Thanks, Dan - Original Message - From: "James Sizemore" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, August 15, 2003 3:34 PM Subject: Re: [Asterisk-Users] '#' doesn't work for me > Do you have transfer turn on in zapata.conf? > transfer=yes > > > >Hi, > > > >I cannot use '#' to initiate transfers. > >I have tried on different phones (7960, ATA, X-Lite). > >When I press '#' during a call, nothing happen. > >I have both T and t switches in Dial application. > >The transfer function works with Flash key on ATA, but in a very strange > >wayThe final destination is hunged up and then automatically called by > >the initial caller... This behavior request to put on hook the phone > >connected to the ATA in order to accept the transfer. During this period the > >phone is busy for the caller, so I must use some tricks in the dialing macro > >in order to acomodate this. > > > >Any other suggestions to better solve the transfer function? > > > > > >BR, > >Dan > > > >___ > >Asterisk-Users mailing list > >[EMAIL PROTECTED] > >http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
