Re: [Asterisk-Users] ATA 186 Registration!!!!
You can only use the r option if you answer the call first exten = 106,1,Answer exten = 106,1,Dial(SIP/106,30,tr) other wise remove the r Erick Weber V. wrote: Thank you very much I just make the change and I'm up an running. One more quick question, why I can not hear the ring in the phone connected to the ATA, My extensions are configure as follow: exten = 106,1,Dial(SIP/106,30,tr) Thanks for the quick response Best Regards Erick - Original Message - From: Ejay Hire [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, February 23, 2004 7:01 PM Subject: RE: [Asterisk-Users] ATA 186 Registration Hi. Open http://ip.of.your.ata/dev and set LoginID0: and LoginID1: to your login Id. Then set UseLoginID: to 1. If you haven't already, set a password on the ATA by entering it into the UIPassword: field. This field does not have repeat to confirm, so type carefully. Last but not least, there is a bug in the v3.0 code for the 186's. If you use the TOS bit's to mark SIP for QOS, downgrade back to 2.1.6. In 3.0, the ata sets TOS to 0x0, and ignores the TOS: configuration field. Hope that helps, Ejay Hire ISDN-Net Network Engineer ...Providing VoIP services to Tennessee businesses since 2003 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Erick Weber V. Sent: Monday, February 23, 2004 5:24 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] ATA 186 Registration I'm tring to register my ATA to * and I getting the following message: Feb 23 18:13:04 NOTICE[1125329600]: chan_sip.c:5405 handle_request: Registration from 'sip:[EMAIL PROTECTED] user=phone' failed for 'xxx.xxx.xxx.xxx' I don't know what's wrong an why it register as user=phone??? Coul some one help me Thanks Erick ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] ATA 186 Registration!!!!
Hi. Open http://ip.of.your.ata/dev and set LoginID0: and LoginID1: to your login Id. Then set UseLoginID: to 1. If you haven't already, set a password on the ATA by entering it into the UIPassword: field. This field does not have repeat to confirm, so type carefully. Last but not least, there is a bug in the v3.0 code for the 186's. If you use the TOS bit's to mark SIP for QOS, downgrade back to 2.1.6. In 3.0, the ata sets TOS to 0x0, and ignores the TOS: configuration field. Hope that helps, Ejay Hire ISDN-Net Network Engineer ...Providing VoIP services to Tennessee businesses since 2003 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Erick Weber V. Sent: Monday, February 23, 2004 5:24 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] ATA 186 Registration I'm tring to register my ATA to * and I getting the following message: Feb 23 18:13:04 NOTICE[1125329600]: chan_sip.c:5405 handle_request: Registration from 'sip:[EMAIL PROTECTED] user=phone' failed for 'xxx.xxx.xxx.xxx' I don't know what's wrong an why it register as user=phone??? Coul some one help me Thanks Erick ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] ATA 186 Registration!!!!
Thank you very much I just make the change and I'm up an running. One more quick question, why I can not hear the ring in the phone connected to the ATA, My extensions are configure as follow: exten = 106,1,Dial(SIP/106,30,tr) Thanks for the quick response Best Regards Erick - Original Message - From: Ejay Hire [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, February 23, 2004 7:01 PM Subject: RE: [Asterisk-Users] ATA 186 Registration Hi. Open http://ip.of.your.ata/dev and set LoginID0: and LoginID1: to your login Id. Then set UseLoginID: to 1. If you haven't already, set a password on the ATA by entering it into the UIPassword: field. This field does not have repeat to confirm, so type carefully. Last but not least, there is a bug in the v3.0 code for the 186's. If you use the TOS bit's to mark SIP for QOS, downgrade back to 2.1.6. In 3.0, the ata sets TOS to 0x0, and ignores the TOS: configuration field. Hope that helps, Ejay Hire ISDN-Net Network Engineer ...Providing VoIP services to Tennessee businesses since 2003 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Erick Weber V. Sent: Monday, February 23, 2004 5:24 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] ATA 186 Registration I'm tring to register my ATA to * and I getting the following message: Feb 23 18:13:04 NOTICE[1125329600]: chan_sip.c:5405 handle_request: Registration from 'sip:[EMAIL PROTECTED] user=phone' failed for 'xxx.xxx.xxx.xxx' I don't know what's wrong an why it register as user=phone??? Coul some one help me Thanks Erick ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] ATA 186 Registration!!!!
In your sip.conf file, where you're describing your ata-186, make sure that your username is the same as the [description] above the phone. Mine starts out like [cisco] type=friend username=cisco secret=* nat=yes host=dynamic My UID0 on the ata-186 is 'cisco' and the password matches the secret in the sip.conf file. I couldn't get it to register either until the bit in brackets matched the username, then it worked fine. I have both channels of my ata 186 registering as different extensions. Tim -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Erick Weber V. Sent: Monday, February 23, 2004 8:24 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] ATA 186 Registration I'm tring to register my ATA to * and I getting the following message: Feb 23 18:13:04 NOTICE[1125329600]: chan_sip.c:5405 handle_request: Registration from 'sip:[EMAIL PROTECTED] user=phone' failed for 'xxx.xxx.xxx.xxx' I don't know what's wrong an why it register as user=phone??? Coul some one help me Thanks Erick ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] ATA-186 Registration Issue
Hi y'all, I have an ATA-186 and it seems to be timing out. After allowing sometime to pass, the device seems to disapear, causing requests for extensions directed to the ATA, to default to vmail. Is there something I can do to keep this from happening? Regards, Phillip Upgrade to the most recent ATA-186 code, which at my last peek was 2.17 JT ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] ATA-186 Registration Issue
You wouldn't happen to have this, would you? Or know of where I can download it, without signing up w/ Cisco? Regards, Phillip -- Phillip C. Jackson [EMAIL PROTECTED] - This mail sent through IMP: http://horde.org/imp/ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] ATA-186 Registration Issue
I just checked on Cisco software center ... There is no 2.17 version ... The latest one, which was released on Oct 22,2003 is 2.16.1, file name : ata18x-v2-16-1-030709a-2.zip Do you need one ? Regards, Alexander http://asterisk.xvoip.com unofficial Asterisk Online Forums Come and share your information. Open your mind to community. - Original Message - From: Phillip Jackson [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, October 26, 2003 8:59 PM Subject: Re: [Asterisk-Users] ATA-186 Registration Issue You wouldn't happen to have this, would you? Or know of where I can download it, without signing up w/ Cisco? Regards, Phillip -- Phillip C. Jackson [EMAIL PROTECTED] - This mail sent through IMP: http://horde.org/imp/ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] ATA-186 Registration Issue
All, -- I've upgraded my ATA-186 successfully to: ata000af453d1a9 Version: v2.16.1 ata18x (Build 030709a) Below is a link to my config, on the ATA: http://www.jacksongrp.com/telephony/dev.htm -- I am utilizing both lines on the Cisco 7960. I have been able to break things on occasion (from recieving calls on ATA - asterisk routes directly to mailbox) by calling one line of the ATA from my Cisco 7960, answering, then blind transfering the call to another line on the ATA. It seems, after doing this, that I can still call out from either of the two lines on the ATA, but I cannot call into those lines - asterisk comedian vmail answers (it's not so funny!) :-) However, I think things may be OK now, as I've upgraded software again, and went through my configs. SO .. can you take a look at my config - how does it compare to yours? AND, have you, also, experienced similar problems? Solutions? Cheers, Phillip ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] ATA-186 Registration Issue
Utilizing both lines on the Cisco ATA-186! Not, 7960 - it's late! Regards, Phillip On Oct 26, 2003, at 11:45 PM, Phillip Jackson, President CEO wrote: All, -- I've upgraded my ATA-186 successfully to: ata000af453d1a9 Version: v2.16.1 ata18x (Build 030709a) Below is a link to my config, on the ATA: http://www.jacksongrp.com/telephony/dev.htm -- I am utilizing both lines on the Cisco 7960. I have been able to break things on occasion (from recieving calls on ATA - asterisk routes directly to mailbox) by calling one line of the ATA from my Cisco 7960, answering, then blind transfering the call to another line on the ATA. It seems, after doing this, that I can still call out from either of the two lines on the ATA, but I cannot call into those lines - asterisk comedian vmail answers (it's not so funny!) :-) However, I think things may be OK now, as I've upgraded software again, and went through my configs. SO .. can you take a look at my config - how does it compare to yours? AND, have you, also, experienced similar problems? Solutions? Cheers, Phillip ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
