Re: [Asterisk-Users] Ok, Im confused
Not exactly :-) Actually, you can get FWD to work through a NAT. SIP will send its registration requests out the same port it expects a response on. This will create a mapping in your NAT so that when INVITEs appear from FWD the NAT can figure out which local host to send them to. Same thing happens with SIP between the caller and the local machine. RTP does the same trick too. I do this all the time with a Linksys router without any difficulty. Now things get a little more complicated if you have more than one SIP device behind the firewall that's trying to talk to the outside world. You'll need to configure each to use a unique SIP port, as well as a unique range of RTP ports. If not, the NAT will see more than one local_ip:proto:port tuple and will have to remap the port as the packet leaves the router. But since the VIA header in the SIP packets will refer to the original port, incoming SIP traffic will end up at the wrong local host. With * you can avoid these problems by having all traffic go through the * box. Do this by adding "reinvite=no" to your sip.conf, and configure your SIP phones to use * as a proxy. Do not turn on NAT in the SIP phones. Actual firewalls (as apposed to just NATs like on a Linksys) may pose additional problems depending on how they're configured. But that's probably now what you're experiencing. Cheers, -brian Scott Weis wrote: The simple answer probably is, If you have a NAT firewall (like a linksys, netgear, dlink, etc) it will not work. If your linux machine is directly connected follow the instructions on the wiki and it will work no problems. I could not get FWD to work at all until I made my linux box the outside edge of my network. Scott - Original Message - From: "James H. Thompson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, April 21, 2004 8:58 PM Subject: Re: [Asterisk-Users] Ok, Im confused You can post your .conf files. But here is a guess at what you may need replace "FWD##" with your freeworlddialup number and "mypassword" with your freeworlddialup password. in sip.conf context = from-fwd register=FWD##:[EMAIL PROTECTED]/FWD## [fwd] type=friend secret=mypassword username=FWD## host=fwd.pulver.com in phone.conf ... context=from-phone ... in extensions.conf [from-fwd] exten => FWD##,1,Dial(Phone/phone0) exten => i,2,Playback(invalid) [from-phone] exten => _.,1,SetCallerID(FWD##) exten => _.,2,SetCIDName(FWD##) exten => _.,3,Dial(SIP/${EXTEN:[EMAIL PROTECTED]) exten => _.,4,Playback(invalid) exten => _.,5,Hangup Jim James H. Thompson [EMAIL PROTECTED] - Original Message - From: "tmpm" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, April 21, 2004 1:24 PM Subject: Re: [Asterisk-Users] Ok, Im confused Thanks Jim, But that page started my trip off to confusionbeen theretried it 10 different ways...still no joy. I'll go through it once again, maybe Im missing something, I dont know. Im about ready to boot the penguin to the curb... I know its in there...I think Ive got it all configured, and I dial the outbound strings, and get a fast busy...I know one stinking letter off, and its whacked... HOW for example do I specify my one and only extension is the Internet phone jack? Phone0? Somehow theres got to be a tie-in...I cant find it. been thru extensions.conf, phones.conf, sip.conf..etc. groan.. At 18:40 4/21/2004, you wrote: Look here: http://www.voip-info.org/wiki-Asterisk+How+to+connect+to+FWD Jim James H. Thompson [EMAIL PROTECTED] - Original Message - From: "tmpm" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, April 21, 2004 11:50 AM Subject: [Asterisk-Users] Ok, Im confused Im totally a newbee at * Im confused. Ive got a FWD account, and it works on the winboxen. Ive got * up and can do the echotest etc, so its working. I want to get FWD working, and all the pages ive seen on setup are most confusing. Is FWD setup like IAXTEL? Do i plug in my FWD info in the same places as the IAXTEL stuff? Ive been trying for a week now, and Im more lost than before. Ive got a Internet phonejack card in the penguin, phone0, and all I want to do at this point is make and receive calls thru FWD using that jackIll plug the house in later...Ill learn the other stuff later. No voicemail, no BS, no dial thru least cost routing, or nightlines just make it work as a phone. Im either more stupid than I think, or Im missing something major here. Ive got to the point the CLI shows me connected to FWD fine.(I think) Sip show users Username Secret Authen Def. Context a/c fwd.pulver.com secret md5,plaintext defaul
RE: [Asterisk-Users] Ok, Im confused
Take a look at my website http://www.mandra.homeip.net/asterisk the config files are also posted on the wiki. If you are still having problems call me at FWD 290805. Bill -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of tmpm Sent: Thursday, April 22, 2004 ONYX 3:27 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Ok, Im confused Its that now, its the machine facing my 4mb cablemodem...thanks.. At 01:54 4/22/2004, you wrote: >The simple answer probably is, If you have a NAT firewall (like a linksys, >netgear, dlink, etc) it will not work. > >If your linux machine is directly connected follow the instructions on the >wiki and it will work no problems. I could not get FWD to work at all until >I made my linux box the outside edge of my network. > >Scott >- Original Message - >From: "James H. Thompson" <[EMAIL PROTECTED]> >To: <[EMAIL PROTECTED]> >Sent: Wednesday, April 21, 2004 8:58 PM >Subject: Re: [Asterisk-Users] Ok, Im confused > > > > You can post your .conf files. > > > > But here is a guess at what you may need > > replace "FWD##" with your freeworlddialup number and "mypassword" with >your freeworlddialup > > password. > > > > in sip.conf > > > > context = from-fwd > > register=FWD##:[EMAIL PROTECTED]/FWD## > > > > [fwd] > > type=friend > > secret=mypassword > > username=FWD## > > host=fwd.pulver.com > > > > in phone.conf > > ... > > context=from-phone > > ... > > > > in extensions.conf > > > > [from-fwd] > > exten => FWD##,1,Dial(Phone/phone0) > > exten => i,2,Playback(invalid) > > > > [from-phone] > > exten => _.,1,SetCallerID(FWD##) > > exten => _.,2,SetCIDName(FWD##) > > exten => _.,3,Dial(SIP/${EXTEN:[EMAIL PROTECTED]) > > exten => _.,4,Playback(invalid) > > exten => _.,5,Hangup > > > > > > > > > > > > Jim > > > > James H. Thompson > > [EMAIL PROTECTED] > > > > - Original Message - > > From: "tmpm" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Wednesday, April 21, 2004 1:24 PM > > Subject: Re: [Asterisk-Users] Ok, Im confused > > > > > > > Thanks Jim, > > > But that page started my trip off to confusionbeen theretried it >10 > > > different ways...still no joy. > > > I'll go through it once again, maybe Im missing something, I dont know. >Im > > > about ready to boot the penguin to the curb... > > > I know its in there...I think Ive got it all configured, and I dial the > > > outbound strings, and get a fast busy...I know one stinking letter off, >and > > > its whacked... > > > HOW for example do I specify my one and only extension is the Internet > > > phone jack? Phone0? > > > Somehow theres got to be a tie-in...I cant find it. > > > been thru extensions.conf, phones.conf, sip.conf..etc. > > > groan.. > > > > > > At 18:40 4/21/2004, you wrote: > > > >Look here: > > > > http://www.voip-info.org/wiki-Asterisk+How+to+connect+to+FWD > > > > > > > >Jim > > > > > > > >James H. Thompson > > > >[EMAIL PROTECTED] > > > > > > > >- Original Message - > > > >From: "tmpm" <[EMAIL PROTECTED]> > > > >To: <[EMAIL PROTECTED]> > > > >Sent: Wednesday, April 21, 2004 11:50 AM > > > >Subject: [Asterisk-Users] Ok, Im confused > > > > > > > > > > > > > Im totally a newbee at * > > > > > > > > > > Im confused. > > > > > Ive got a FWD account, and it works on the winboxen. Ive got * up >and can > > > > > do the echotest etc, so its working. > > > > > > > > > > I want to get FWD working, and all the pages ive seen on setup are >most > > > > > confusing. > > > > > Is FWD setup like IAXTEL? Do i plug in my FWD info in the same >places as > > > > > the IAXTEL stuff? > > > > > Ive been trying for a week now, and Im more lost than before. > > > > > > > > > > Ive got a Internet phonejack card in the penguin, phone0, and all I > > > > want to > > > > > do at this point is make and receive calls thru FWD using that >jackIll > > > > > plug the house in later...Ill learn the other stuff later. No > >
Re: [Asterisk-Users] Ok, Im confused
Its that now, its the machine facing my 4mb cablemodem...thanks.. At 01:54 4/22/2004, you wrote: The simple answer probably is, If you have a NAT firewall (like a linksys, netgear, dlink, etc) it will not work. If your linux machine is directly connected follow the instructions on the wiki and it will work no problems. I could not get FWD to work at all until I made my linux box the outside edge of my network. Scott - Original Message - From: "James H. Thompson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, April 21, 2004 8:58 PM Subject: Re: [Asterisk-Users] Ok, Im confused > You can post your .conf files. > > But here is a guess at what you may need > replace "FWD##" with your freeworlddialup number and "mypassword" with your freeworlddialup > password. > > in sip.conf > > context = from-fwd > register=FWD##:[EMAIL PROTECTED]/FWD## > > [fwd] > type=friend > secret=mypassword > username=FWD## > host=fwd.pulver.com > > in phone.conf > ... > context=from-phone > ... > > in extensions.conf > > [from-fwd] > exten => FWD##,1,Dial(Phone/phone0) > exten => i,2,Playback(invalid) > > [from-phone] > exten => _.,1,SetCallerID(FWD##) > exten => _.,2,SetCIDName(FWD##) > exten => _.,3,Dial(SIP/${EXTEN:[EMAIL PROTECTED]) > exten => _.,4,Playback(invalid) > exten => _.,5,Hangup > > > > > > Jim > > James H. Thompson > [EMAIL PROTECTED] > > - Original Message - > From: "tmpm" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, April 21, 2004 1:24 PM > Subject: Re: [Asterisk-Users] Ok, Im confused > > > > Thanks Jim, > > But that page started my trip off to confusionbeen theretried it 10 > > different ways...still no joy. > > I'll go through it once again, maybe Im missing something, I dont know. Im > > about ready to boot the penguin to the curb... > > I know its in there...I think Ive got it all configured, and I dial the > > outbound strings, and get a fast busy...I know one stinking letter off, and > > its whacked... > > HOW for example do I specify my one and only extension is the Internet > > phone jack? Phone0? > > Somehow theres got to be a tie-in...I cant find it. > > been thru extensions.conf, phones.conf, sip.conf..etc. > > groan.. > > > > At 18:40 4/21/2004, you wrote: > > >Look here: > > > http://www.voip-info.org/wiki-Asterisk+How+to+connect+to+FWD > > > > > >Jim > > > > > >James H. Thompson > > >[EMAIL PROTECTED] > > > > > >- Original Message - > > >From: "tmpm" <[EMAIL PROTECTED]> > > >To: <[EMAIL PROTECTED]> > > >Sent: Wednesday, April 21, 2004 11:50 AM > > >Subject: [Asterisk-Users] Ok, Im confused > > > > > > > > > > Im totally a newbee at * > > > > > > > > Im confused. > > > > Ive got a FWD account, and it works on the winboxen. Ive got * up and can > > > > do the echotest etc, so its working. > > > > > > > > I want to get FWD working, and all the pages ive seen on setup are most > > > > confusing. > > > > Is FWD setup like IAXTEL? Do i plug in my FWD info in the same places as > > > > the IAXTEL stuff? > > > > Ive been trying for a week now, and Im more lost than before. > > > > > > > > Ive got a Internet phonejack card in the penguin, phone0, and all I > > > want to > > > > do at this point is make and receive calls thru FWD using that jackIll > > > > plug the house in later...Ill learn the other stuff later. No > > > voicemail, no > > > > BS, no dial thru least cost routing, or nightlines just make it > > > work as > > > > a phone. > > > > > > > > Im either more stupid than I think, or Im missing something major here. > > > > > > > > Ive got to the point the CLI shows me connected to FWD fine.(I think) > > > > Sip show users > > > > > > > > Username Secret Authen Def. Context a/c > > > > fwd.pulver.com secret md5,plaintext default no > > > > > > > > Need some basic, stupidly simple scripts here...I dont need or want to > > > dial > > > > 1-700 or *9 or any other crap, just make it work like the stupid winbox > > > > phone for now...Ill read the wiki for a couple years, and then maybe I can > > > > do voicemail or whatever... > > > > >
Re: [Asterisk-Users] Ok, Im confused
Thanks Jim will do... At 20:58 4/21/2004, you wrote: You can post your .conf files. But here is a guess at what you may need replace "FWD##" with your freeworlddialup number and "mypassword" with your freeworlddialup password. in sip.conf context = from-fwd register=FWD##:[EMAIL PROTECTED]/FWD## [fwd] type=friend secret=mypassword username=FWD## host=fwd.pulver.com in phone.conf ... context=from-phone ... in extensions.conf [from-fwd] exten => FWD##,1,Dial(Phone/phone0) exten => i,2,Playback(invalid) [from-phone] exten => _.,1,SetCallerID(FWD##) exten => _.,2,SetCIDName(FWD##) exten => _.,3,Dial(SIP/${EXTEN:[EMAIL PROTECTED]) exten => _.,4,Playback(invalid) exten => _.,5,Hangup Jim James H. Thompson [EMAIL PROTECTED] - Original Message - From: "tmpm" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, April 21, 2004 1:24 PM Subject: Re: [Asterisk-Users] Ok, Im confused > Thanks Jim, > But that page started my trip off to confusionbeen theretried it 10 > different ways...still no joy. > I'll go through it once again, maybe Im missing something, I dont know. Im > about ready to boot the penguin to the curb... > I know its in there...I think Ive got it all configured, and I dial the > outbound strings, and get a fast busy...I know one stinking letter off, and > its whacked... > HOW for example do I specify my one and only extension is the Internet > phone jack? Phone0? > Somehow theres got to be a tie-in...I cant find it. > been thru extensions.conf, phones.conf, sip.conf..etc. > groan.. > > At 18:40 4/21/2004, you wrote: > >Look here: > > http://www.voip-info.org/wiki-Asterisk+How+to+connect+to+FWD > > > >Jim > > > >James H. Thompson > >[EMAIL PROTECTED] > > > >- Original Message - > >From: "tmpm" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Wednesday, April 21, 2004 11:50 AM > >Subject: [Asterisk-Users] Ok, Im confused > > > > > > > Im totally a newbee at * > > > > > > Im confused. > > > Ive got a FWD account, and it works on the winboxen. Ive got * up and can > > > do the echotest etc, so its working. > > > > > > I want to get FWD working, and all the pages ive seen on setup are most > > > confusing. > > > Is FWD setup like IAXTEL? Do i plug in my FWD info in the same places as > > > the IAXTEL stuff? > > > Ive been trying for a week now, and Im more lost than before. > > > > > > Ive got a Internet phonejack card in the penguin, phone0, and all I > > want to > > > do at this point is make and receive calls thru FWD using that jackIll > > > plug the house in later...Ill learn the other stuff later. No > > voicemail, no > > > BS, no dial thru least cost routing, or nightlines just make it > > work as > > > a phone. > > > > > > Im either more stupid than I think, or Im missing something major here. > > > > > > Ive got to the point the CLI shows me connected to FWD fine.(I think) > > > Sip show users > > > > > > Username Secret Authen Def. Context a/c > > > fwd.pulver.com secret md5,plaintext default no > > > > > > Need some basic, stupidly simple scripts here...I dont need or want to > > dial > > > 1-700 or *9 or any other crap, just make it work like the stupid winbox > > > phone for now...Ill read the wiki for a couple years, and then maybe I can > > > do voicemail or whatever... > > > > > > frustrated...and I know its showing...sri > > > > > > ___ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > To UNSUBSCRIBE or update options visit: > > >http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > >___ > >Asterisk-Users mailing list > >[EMAIL PROTECTED] > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > >http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Ok, Im confused
Not sure specifically about FWD specifically but you can get * sip to register from behind NAT in general but look at this link and work with the NAT options in the sip.conf , general section, if you Asterisk box in behind a NAT device such as a linksys. In some cases in may be neccessay to plug port on your NAT device. General 5060 and 1 thru 2 to the internal ip of your Asterisk box. FYI if you external IP changes on your NAT device you will need account for that in your sip.conf . Also, in this configuration it will work best with canreinvite=no for all sip devices. http://www.voip-info.org/wiki-Asterisk+SIP+NAT+solutions - Original Message - From: "Scott Weis" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, April 22, 2004 1:54 AM Subject: Re: [Asterisk-Users] Ok, Im confused > The simple answer probably is, If you have a NAT firewall (like a linksys, > netgear, dlink, etc) it will not work. > > If your linux machine is directly connected follow the instructions on the > wiki and it will work no problems. I could not get FWD to work at all until > I made my linux box the outside edge of my network. > > Scott > - Original Message - > From: "James H. Thompson" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, April 21, 2004 8:58 PM > Subject: Re: [Asterisk-Users] Ok, Im confused > > > > You can post your .conf files. > > > > But here is a guess at what you may need > > replace "FWD##" with your freeworlddialup number and "mypassword" with > your freeworlddialup > > password. > > > > in sip.conf > > > > context = from-fwd > > register=FWD##:[EMAIL PROTECTED]/FWD## > > > > [fwd] > > type=friend > > secret=mypassword > > username=FWD## > > host=fwd.pulver.com > > > > in phone.conf > > ... > > context=from-phone > > ... > > > > in extensions.conf > > > > [from-fwd] > > exten => FWD##,1,Dial(Phone/phone0) > > exten => i,2,Playback(invalid) > > > > [from-phone] > > exten => _.,1,SetCallerID(FWD##) > > exten => _.,2,SetCIDName(FWD##) > > exten => _.,3,Dial(SIP/${EXTEN:[EMAIL PROTECTED]) > > exten => _.,4,Playback(invalid) > > exten => _.,5,Hangup > > > > > > > > > > > > Jim > > > > James H. Thompson > > [EMAIL PROTECTED] > > > > - Original Message - > > From: "tmpm" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Wednesday, April 21, 2004 1:24 PM > > Subject: Re: [Asterisk-Users] Ok, Im confused > > > > > > > Thanks Jim, > > > But that page started my trip off to confusionbeen theretried it > 10 > > > different ways...still no joy. > > > I'll go through it once again, maybe Im missing something, I dont know. > Im > > > about ready to boot the penguin to the curb... > > > I know its in there...I think Ive got it all configured, and I dial the > > > outbound strings, and get a fast busy...I know one stinking letter off, > and > > > its whacked... > > > HOW for example do I specify my one and only extension is the Internet > > > phone jack? Phone0? > > > Somehow theres got to be a tie-in...I cant find it. > > > been thru extensions.conf, phones.conf, sip.conf..etc. > > > groan.. > > > > > > At 18:40 4/21/2004, you wrote: > > > >Look here: > > > > http://www.voip-info.org/wiki-Asterisk+How+to+connect+to+FWD > > > > > > > >Jim > > > > > > > >James H. Thompson > > > >[EMAIL PROTECTED] > > > > > > > >- Original Message - > > > >From: "tmpm" <[EMAIL PROTECTED]> > > > >To: <[EMAIL PROTECTED]> > > > >Sent: Wednesday, April 21, 2004 11:50 AM > > > >Subject: [Asterisk-Users] Ok, Im confused > > > > > > > > > > > > > Im totally a newbee at * > > > > > > > > > > Im confused. > > > > > Ive got a FWD account, and it works on the winboxen. Ive got * up > and can > > > > > do the echotest etc, so its working. > > > > > > > > > > I want to get FWD working, and all the pages ive seen on setup are > most > > > > > confusing. > > > > > Is FWD setup like IAXTEL? Do i plug in my FWD info in the same > places as > > > > > the IAXTEL stuff? > > > > > Ive been trying for a
Re: [Asterisk-Users] Ok, Im confused
The simple answer probably is, If you have a NAT firewall (like a linksys, netgear, dlink, etc) it will not work. If your linux machine is directly connected follow the instructions on the wiki and it will work no problems. I could not get FWD to work at all until I made my linux box the outside edge of my network. Scott - Original Message - From: "James H. Thompson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, April 21, 2004 8:58 PM Subject: Re: [Asterisk-Users] Ok, Im confused > You can post your .conf files. > > But here is a guess at what you may need > replace "FWD##" with your freeworlddialup number and "mypassword" with your freeworlddialup > password. > > in sip.conf > > context = from-fwd > register=FWD##:[EMAIL PROTECTED]/FWD## > > [fwd] > type=friend > secret=mypassword > username=FWD## > host=fwd.pulver.com > > in phone.conf > ... > context=from-phone > ... > > in extensions.conf > > [from-fwd] > exten => FWD##,1,Dial(Phone/phone0) > exten => i,2,Playback(invalid) > > [from-phone] > exten => _.,1,SetCallerID(FWD##) > exten => _.,2,SetCIDName(FWD##) > exten => _.,3,Dial(SIP/${EXTEN:[EMAIL PROTECTED]) > exten => _.,4,Playback(invalid) > exten => _.,5,Hangup > > > > > > Jim > > James H. Thompson > [EMAIL PROTECTED] > > - Original Message - > From: "tmpm" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, April 21, 2004 1:24 PM > Subject: Re: [Asterisk-Users] Ok, Im confused > > > > Thanks Jim, > > But that page started my trip off to confusionbeen theretried it 10 > > different ways...still no joy. > > I'll go through it once again, maybe Im missing something, I dont know. Im > > about ready to boot the penguin to the curb... > > I know its in there...I think Ive got it all configured, and I dial the > > outbound strings, and get a fast busy...I know one stinking letter off, and > > its whacked... > > HOW for example do I specify my one and only extension is the Internet > > phone jack? Phone0? > > Somehow theres got to be a tie-in...I cant find it. > > been thru extensions.conf, phones.conf, sip.conf..etc. > > groan.. > > > > At 18:40 4/21/2004, you wrote: > > >Look here: > > > http://www.voip-info.org/wiki-Asterisk+How+to+connect+to+FWD > > > > > >Jim > > > > > >James H. Thompson > > >[EMAIL PROTECTED] > > > > > >- Original Message - > > >From: "tmpm" <[EMAIL PROTECTED]> > > >To: <[EMAIL PROTECTED]> > > >Sent: Wednesday, April 21, 2004 11:50 AM > > >Subject: [Asterisk-Users] Ok, Im confused > > > > > > > > > > Im totally a newbee at * > > > > > > > > Im confused. > > > > Ive got a FWD account, and it works on the winboxen. Ive got * up and can > > > > do the echotest etc, so its working. > > > > > > > > I want to get FWD working, and all the pages ive seen on setup are most > > > > confusing. > > > > Is FWD setup like IAXTEL? Do i plug in my FWD info in the same places as > > > > the IAXTEL stuff? > > > > Ive been trying for a week now, and Im more lost than before. > > > > > > > > Ive got a Internet phonejack card in the penguin, phone0, and all I > > > want to > > > > do at this point is make and receive calls thru FWD using that jackIll > > > > plug the house in later...Ill learn the other stuff later. No > > > voicemail, no > > > > BS, no dial thru least cost routing, or nightlines just make it > > > work as > > > > a phone. > > > > > > > > Im either more stupid than I think, or Im missing something major here. > > > > > > > > Ive got to the point the CLI shows me connected to FWD fine.(I think) > > > > Sip show users > > > > > > > > Username Secret Authen Def. Context a/c > > > > fwd.pulver.com secret md5,plaintext default no > > > > > > > > Need some basic, stupidly simple scripts here...I dont need or want to > > > dial > > > > 1-700 or *9 or any other crap, just make it work like the stupid winbox > > > > phone for now...Ill read the wiki for a couple years, and then maybe I can > > > > do voicemail or whatever... > > > > > > > > frustrated...and I know its showing...sri > > > > > > > >
Re: [Asterisk-Users] Ok, Im confused
You can post your .conf files. But here is a guess at what you may need replace "FWD##" with your freeworlddialup number and "mypassword" with your freeworlddialup password. in sip.conf context = from-fwd register=FWD##:[EMAIL PROTECTED]/FWD## [fwd] type=friend secret=mypassword username=FWD## host=fwd.pulver.com in phone.conf ... context=from-phone ... in extensions.conf [from-fwd] exten => FWD##,1,Dial(Phone/phone0) exten => i,2,Playback(invalid) [from-phone] exten => _.,1,SetCallerID(FWD##) exten => _.,2,SetCIDName(FWD##) exten => _.,3,Dial(SIP/${EXTEN:[EMAIL PROTECTED]) exten => _.,4,Playback(invalid) exten => _.,5,Hangup Jim James H. Thompson [EMAIL PROTECTED] - Original Message - From: "tmpm" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, April 21, 2004 1:24 PM Subject: Re: [Asterisk-Users] Ok, Im confused > Thanks Jim, > But that page started my trip off to confusionbeen theretried it 10 > different ways...still no joy. > I'll go through it once again, maybe Im missing something, I dont know. Im > about ready to boot the penguin to the curb... > I know its in there...I think Ive got it all configured, and I dial the > outbound strings, and get a fast busy...I know one stinking letter off, and > its whacked... > HOW for example do I specify my one and only extension is the Internet > phone jack? Phone0? > Somehow theres got to be a tie-in...I cant find it. > been thru extensions.conf, phones.conf, sip.conf..etc. > groan.. > > At 18:40 4/21/2004, you wrote: > >Look here: > > http://www.voip-info.org/wiki-Asterisk+How+to+connect+to+FWD > > > >Jim > > > >James H. Thompson > >[EMAIL PROTECTED] > > > >- Original Message - > >From: "tmpm" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Wednesday, April 21, 2004 11:50 AM > >Subject: [Asterisk-Users] Ok, Im confused > > > > > > > Im totally a newbee at * > > > > > > Im confused. > > > Ive got a FWD account, and it works on the winboxen. Ive got * up and can > > > do the echotest etc, so its working. > > > > > > I want to get FWD working, and all the pages ive seen on setup are most > > > confusing. > > > Is FWD setup like IAXTEL? Do i plug in my FWD info in the same places as > > > the IAXTEL stuff? > > > Ive been trying for a week now, and Im more lost than before. > > > > > > Ive got a Internet phonejack card in the penguin, phone0, and all I > > want to > > > do at this point is make and receive calls thru FWD using that jackIll > > > plug the house in later...Ill learn the other stuff later. No > > voicemail, no > > > BS, no dial thru least cost routing, or nightlines just make it > > work as > > > a phone. > > > > > > Im either more stupid than I think, or Im missing something major here. > > > > > > Ive got to the point the CLI shows me connected to FWD fine.(I think) > > > Sip show users > > > > > > Username Secret Authen Def. Context a/c > > > fwd.pulver.com secret md5,plaintext default no > > > > > > Need some basic, stupidly simple scripts here...I dont need or want to > > dial > > > 1-700 or *9 or any other crap, just make it work like the stupid winbox > > > phone for now...Ill read the wiki for a couple years, and then maybe I can > > > do voicemail or whatever... > > > > > > frustrated...and I know its showing...sri > > > > > > ___ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > To UNSUBSCRIBE or update options visit: > > >http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > >___ > >Asterisk-Users mailing list > >[EMAIL PROTECTED] > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > >http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Ok, Im confused
Thanks Jim, But that page started my trip off to confusionbeen theretried it 10 different ways...still no joy. I'll go through it once again, maybe Im missing something, I dont know. Im about ready to boot the penguin to the curb... I know its in there...I think Ive got it all configured, and I dial the outbound strings, and get a fast busy...I know one stinking letter off, and its whacked... HOW for example do I specify my one and only extension is the Internet phone jack? Phone0? Somehow theres got to be a tie-in...I cant find it. been thru extensions.conf, phones.conf, sip.conf..etc. groan.. At 18:40 4/21/2004, you wrote: Look here: http://www.voip-info.org/wiki-Asterisk+How+to+connect+to+FWD Jim James H. Thompson [EMAIL PROTECTED] - Original Message - From: "tmpm" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, April 21, 2004 11:50 AM Subject: [Asterisk-Users] Ok, Im confused > Im totally a newbee at * > > Im confused. > Ive got a FWD account, and it works on the winboxen. Ive got * up and can > do the echotest etc, so its working. > > I want to get FWD working, and all the pages ive seen on setup are most > confusing. > Is FWD setup like IAXTEL? Do i plug in my FWD info in the same places as > the IAXTEL stuff? > Ive been trying for a week now, and Im more lost than before. > > Ive got a Internet phonejack card in the penguin, phone0, and all I want to > do at this point is make and receive calls thru FWD using that jackIll > plug the house in later...Ill learn the other stuff later. No voicemail, no > BS, no dial thru least cost routing, or nightlines just make it work as > a phone. > > Im either more stupid than I think, or Im missing something major here. > > Ive got to the point the CLI shows me connected to FWD fine.(I think) > Sip show users > > Username Secret Authen Def. Context a/c > fwd.pulver.com secret md5,plaintext default no > > Need some basic, stupidly simple scripts here...I dont need or want to dial > 1-700 or *9 or any other crap, just make it work like the stupid winbox > phone for now...Ill read the wiki for a couple years, and then maybe I can > do voicemail or whatever... > > frustrated...and I know its showing...sri > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Ok, Im confused
Look here: http://www.voip-info.org/wiki-Asterisk+How+to+connect+to+FWD Jim James H. Thompson [EMAIL PROTECTED] - Original Message - From: "tmpm" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, April 21, 2004 11:50 AM Subject: [Asterisk-Users] Ok, Im confused > Im totally a newbee at * > > Im confused. > Ive got a FWD account, and it works on the winboxen. Ive got * up and can > do the echotest etc, so its working. > > I want to get FWD working, and all the pages ive seen on setup are most > confusing. > Is FWD setup like IAXTEL? Do i plug in my FWD info in the same places as > the IAXTEL stuff? > Ive been trying for a week now, and Im more lost than before. > > Ive got a Internet phonejack card in the penguin, phone0, and all I want to > do at this point is make and receive calls thru FWD using that jackIll > plug the house in later...Ill learn the other stuff later. No voicemail, no > BS, no dial thru least cost routing, or nightlines just make it work as > a phone. > > Im either more stupid than I think, or Im missing something major here. > > Ive got to the point the CLI shows me connected to FWD fine.(I think) > Sip show users > > Username Secret Authen Def. Context a/c > fwd.pulver.com secret md5,plaintext default no > > Need some basic, stupidly simple scripts here...I dont need or want to dial > 1-700 or *9 or any other crap, just make it work like the stupid winbox > phone for now...Ill read the wiki for a couple years, and then maybe I can > do voicemail or whatever... > > frustrated...and I know its showing...sri > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users