RE: [Asterisk-Users] SIP / X-ten Softphone
Andrew--- Thank you for the Sjphone insight. I am liking this much better. I can register and call a extension now. I am having other issues. I'm sure it's just config issues though. Thanks... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andrew Thompson Posted At: Thursday, December 18, 2003 11:16 PM Posted To: Asterisk User Group Conversation: [Asterisk-Users] SIP / X-ten Softphone Subject: Re: [Asterisk-Users] SIP / X-ten Softphone As with any debugging, you should try steps seperately... - Original Message - From: "PBX" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, December 18, 2003 10:42 PM Subject: [Asterisk-Users] SIP / X-ten Softphone > [1005] > type=friend > secret=1005 > host=dynamic > mailbox=1005 > context=default Add user=1005 to this sip.conf definition. > > X-Lite Softphone > > Network->Out Bound SIP Proxy: (IP of *) > > SIP Proxy->Default->Enabled: Yes > SIP Proxy->Default->UserName: 1005 > SIP Proxy->Default->Password: 1005 > SIP Proxy->Default->Domain/Realm: (IP of *) > SIP Proxy->Default->SIP Proxy: (IP of *) > SIP Proxy->Default->Send Internal IP: Always Take a look at some screenshots of X-Lite configs. I remember there being a line or two that wanted to have :5060 after the IP. As a side note, I gave up on X-Lite. I found it difficult to navigate the configuration menus, and there was a background hum that isn't there if I use sjphone, diax, or iaxcomm/iaxclient. Andrew Thompson http://aktzero.com/ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] SIP / X-ten Softphone
if u are using NAT, try adding nat=yes canreinvite=no qualify=500 in your [1005] - Original Message - From: "Sean Cheesman" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, December 19, 2003 9:31 AM Subject: RE: [Asterisk-Users] SIP / X-ten Softphone > try adding username=1005 under [1005] and see if that helps > > -Original Message- > From: PBX [mailto:[EMAIL PROTECTED] > Sent: Thursday, December 18, 2003 10:42 PM > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] SIP / X-ten Softphone > > > I know this has been covered more times than to mention and this is > where I got most of my info from... But I am having issues with this. I > can't seem to get the phone to register with *. This is being tested on > a internal network right now. > > Here is the setup - > > sip.conf > > [general] > port = 5060 ; Port to bind to > bindaddr = 0.0.0.0 ; Address to bind to > context = default ; Default for incoming calls > allow = all > > [1005] > type=friend > secret=1005 > host=dynamic > mailbox=1005 > context=default > > extension.conf > > ; SIP > > exten => 1005,1,Dial,SIP/1005|15 > exten => 1005,2,Voicemail2(u1005) > exten => 1005,102,Voicemail2(b8200) > > X-Lite Softphone > > Network->Out Bound SIP Proxy: (IP of *) > > SIP Proxy->Default->Enabled: Yes > SIP Proxy->Default->UserName: 1005 > SIP Proxy->Default->Password: 1005 > SIP Proxy->Default->Domain/Realm: (IP of *) > SIP Proxy->Default->SIP Proxy: (IP of *) > SIP Proxy->Default->Send Internal IP: Always > > But the only thing I every get is discovering firewall and Discovered > Full Cone Nat Firewall. > > Any ideas... > > -gcc > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] SIP / X-ten Softphone
Typo... - Original Message - From: "Andrew Thompson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, December 18, 2003 11:16 PM Subject: Re: [Asterisk-Users] SIP / X-ten Softphone > As with any debugging, you should try steps seperately... > > - Original Message - > From: "PBX" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, December 18, 2003 10:42 PM > Subject: [Asterisk-Users] SIP / X-ten Softphone > > > [1005] > > type=friend > > secret=1005 > > host=dynamic > > mailbox=1005 > > context=default > Add username=1005 to this sip.conf definition. > > > > > X-Lite Softphone > > > > Network->Out Bound SIP Proxy: (IP of *) > > > > SIP Proxy->Default->Enabled: Yes > > SIP Proxy->Default->UserName: 1005 > > SIP Proxy->Default->Password: 1005 > > SIP Proxy->Default->Domain/Realm: (IP of *) > > SIP Proxy->Default->SIP Proxy: (IP of *) > > SIP Proxy->Default->Send Internal IP: Always > > Take a look at some screenshots of X-Lite configs. I remember there being a > line or two that wanted to have :5060 after the IP. > > As a side note, I gave up on X-Lite. I found it difficult to navigate the > configuration menus, and there was a background hum that isn't there if I > use sjphone, diax, or iaxcomm/iaxclient. Andrew Thompson http://aktzero.com/ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] SIP / X-ten Softphone
As with any debugging, you should try steps seperately... - Original Message - From: "PBX" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, December 18, 2003 10:42 PM Subject: [Asterisk-Users] SIP / X-ten Softphone > [1005] > type=friend > secret=1005 > host=dynamic > mailbox=1005 > context=default Add user=1005 to this sip.conf definition. > > X-Lite Softphone > > Network->Out Bound SIP Proxy: (IP of *) > > SIP Proxy->Default->Enabled: Yes > SIP Proxy->Default->UserName: 1005 > SIP Proxy->Default->Password: 1005 > SIP Proxy->Default->Domain/Realm: (IP of *) > SIP Proxy->Default->SIP Proxy: (IP of *) > SIP Proxy->Default->Send Internal IP: Always Take a look at some screenshots of X-Lite configs. I remember there being a line or two that wanted to have :5060 after the IP. As a side note, I gave up on X-Lite. I found it difficult to navigate the configuration menus, and there was a background hum that isn't there if I use sjphone, diax, or iaxcomm/iaxclient. Andrew Thompson http://aktzero.com/ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] SIP / X-ten Softphone
try adding username=1005 under [1005] and see if that helps -Original Message- From: PBX [mailto:[EMAIL PROTECTED] Sent: Thursday, December 18, 2003 10:42 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] SIP / X-ten Softphone I know this has been covered more times than to mention and this is where I got most of my info from... But I am having issues with this. I can't seem to get the phone to register with *. This is being tested on a internal network right now. Here is the setup - sip.conf [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to context = default ; Default for incoming calls allow = all [1005] type=friend secret=1005 host=dynamic mailbox=1005 context=default extension.conf ; SIP exten => 1005,1,Dial,SIP/1005|15 exten => 1005,2,Voicemail2(u1005) exten => 1005,102,Voicemail2(b8200) X-Lite Softphone Network->Out Bound SIP Proxy: (IP of *) SIP Proxy->Default->Enabled: Yes SIP Proxy->Default->UserName: 1005 SIP Proxy->Default->Password: 1005 SIP Proxy->Default->Domain/Realm: (IP of *) SIP Proxy->Default->SIP Proxy: (IP of *) SIP Proxy->Default->Send Internal IP: Always But the only thing I every get is discovering firewall and Discovered Full Cone Nat Firewall. Any ideas... -gcc ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
