Re: [Astlinux-users] boot error
hi, i got all the information from this site http://www.astlinux.org/node/28 just tell me how can i make .run file ? thanks for your information. thanks, TOWHID --- On Sun, 12/20/09, Philip A. Prindeville wrote: From: Philip A. Prindeville Subject: Re: [Astlinux-users] boot error To: astlinux-users@lists.sourceforge.net Date: Sunday, December 20, 2009, 2:16 PM On 12/20/2009 03:09 AM, towhid islam wrote: > > hi, > i am new to astlinux. i am trying to make custom astlinux using VMWare. > download the source of astlinux 0.5 because i need (asterisk version less > then 1.4.19) > > 1. cp astlinux.config .config > 2. make oldconfig > 3. make menuconfig (remove some package from default setting like: dialog, >oslec) > 4. make > All 4 of these steps can be accomplished by using the toochain/build script.. > > after compile. > $ ./makeimage.sh > > Checking if "/boot/grub/stage1" exists... no > Checking if "/grub/stage1" exists... no > > Error 15: File not found > > my question is ... > > 1. what mistake i did ? > please advice me > makeimage.sh is deprecated. Use makerunnix.sh instead. > > 2. download the source code astlinux 0.6 and also download the asterisk >0.6(Revision 958) asterisk.mk file and try to build it but it giving me error >!!! why ? > The astlinux tree pulls down everything you need by itself. You don't need to download Asterisk... and Asterisk release numbering is orthogonal to our release numbering. > > 3. is it possible to get .config file of the image >astlinux-0..6.2-net5501.img.gz ? > Don't run 0.6.2. It's not supported any longer. 0.6.7 is the only supported 0.6.x release. > > any suggestion is appreciated. > TOWHID > > -- This SF.Net email is sponsored by the Verizon Developer Community Take advantage of Verizon's best-in-class app development support A streamlined, 14 day to market process makes app distribution fast and easy Join now and get one step closer to millions of Verizon customers http://p.sf.net/sfu/verizon-dev2dev ___ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org. -- This SF.Net email is sponsored by the Verizon Developer Community Take advantage of Verizon's best-in-class app development support A streamlined, 14 day to market process makes app distribution fast and easy Join now and get one step closer to millions of Verizon customers http://p.sf.net/sfu/verizon-dev2dev ___ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
Re: [Astlinux-users] boot error
On 12/20/2009 03:09 AM, towhid islam wrote: > > hi, > i am new to astlinux. i am trying to make custom astlinux using VMWare. > download the source of astlinux 0.5 because i need (asterisk version less > then 1.4.19) > >1. cp astlinux.config .config >2. make oldconfig >3. make menuconfig (remove some package from default setting like: dialog, > oslec) >4. make > All 4 of these steps can be accomplished by using the toochain/build script. > > after compile. > $ ./makeimage.sh > > Checking if "/boot/grub/stage1" exists... no > Checking if "/grub/stage1" exists... no > > Error 15: File not found > > my question is ... > > 1. what mistake i did ? > please advice me > makeimage.sh is deprecated. Use makerunnix.sh instead. > > 2. download the source code astlinux 0.6 and also download the asterisk > 0.6(Revision 958) asterisk.mk file and try to build it but it giving me error > !!! why ? > The astlinux tree pulls down everything you need by itself. You don't need to download Asterisk... and Asterisk release numbering is orthogonal to our release numbering. > > 3. is it possible to get .config file of the image > astlinux-0.6.2-net5501.img.gz ? > Don't run 0.6.2. It's not supported any longer. 0.6.7 is the only supported 0.6.x release. > > any suggestion is appreciated. > TOWHID > > -- This SF.Net email is sponsored by the Verizon Developer Community Take advantage of Verizon's best-in-class app development support A streamlined, 14 day to market process makes app distribution fast and easy Join now and get one step closer to millions of Verizon customers http://p.sf.net/sfu/verizon-dev2dev ___ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
[Astlinux-users] boot error
hi, i am new to astlinux. i am trying to make custom astlinux using VMWare. download the source of astlinux 0.5 because i need (asterisk version less then 1.4.19) 1. cp astlinux.config .config 2. make oldconfig 3. make menuconfig (remove some package from default setting like: dialog, oslec) 4. make after compile. $ ./makeimage.sh Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... no Error 15: File not found my question is ... 1. what mistake i did ? please advice me 2. download the source code astlinux 0.6 and also download the asterisk 0.6(Revision 958) asterisk.mk file and try to build it but it giving me error !!! why ? 3. is it possible to get .config file of the image astlinux-0.6.2-net5501.img.gz ? any suggestion is appreciated. TOWHID -- This SF.Net email is sponsored by the Verizon Developer Community Take advantage of Verizon's best-in-class app development support A streamlined, 14 day to market process makes app distribution fast and easy Join now and get one step closer to millions of Verizon customers http://p.sf.net/sfu/verizon-dev2dev ___ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
Re: [Astlinux-users] Boot error
On 10/23/07, James Haayen <[EMAIL PROTECTED]> wrote: > > I got the following output while trying to boot Astlinux on a Soekris 4801 > from a Trascend compact flash card: > > Booting 'AstLinux (Boot from CF - Use USB KeyDisk)' > > root (hd0,0) > Filesystem type is ext2fs, partition type 0x83 Look here: > kernel /boot/bzImage root=/dev/hda1 console=ttyS0,19200n8 astlinux=net4801 > astk > d=/dev/sda1 ide=nodma >[Linux-bzImage, setup=0x1400, size=0x11287e] > savedefault ..snip.. and here: > hdb: TRANSCEND, ATA DISK drive > SC1200: set xfer mode failure > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > hdb: max request size: 128KiB > hdb: 1993824 sectors (1020 MB) w/1KiB Cache, CHS=1978/16/63 > hdb: hdb1 ..snip.. > VFS: Cannot open root device "hda1" or unknown-block(0,0) > Please append a correct "root=" boot option > Kernel panic - not syncing: VFS: Unable to mount root fs on > unknown-block(0,0) > Your flash card doesn't do IDE emulation properly and is showing up as a slave device on the primary IDE controller. > Any idea?? > I downloaded the latest image from sourceforget.net, also I tried to build > it using ADE but something is wrong.. You can either use a different flash card (Sandisk works well) or modify your grub.conf to pass "root=/dev/hdb1" to the kernel. -- Kristian Kielhofner - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ ___ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
[Astlinux-users] Boot error
I got the following output while trying to boot Astlinux on a Soekris 4801 from a Trascend compact flash card: Booting 'AstLinux (Boot from CF - Use USB KeyDisk)' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /boot/bzImage root=/dev/hda1 console=ttyS0,19200n8 astlinux=net4801 astk d=/dev/sda1 ide=nodma [Linux-bzImage, setup=0x1400, size=0x11287e] savedefault Linux version 2.6.16.12 ([EMAIL PROTECTED]) (gcc version 3.4.2) #1 PREEMPT Tue Sep 11 00:57:02 EDT 2007 BIOS-provided physical RAM map: BIOS-e820: - 0009fc00 (usable) BIOS-e820: 0009fc00 - 000a (reserved) BIOS-e820: 000f - 0010 (reserved) BIOS-e820: 0010 - 0800 (usable) BIOS-e820: fff0 - 0001 (reserved) 128MB LOWMEM available. DMI not present or invalid. Allocating PCI resources starting at 1000 (gap: 0800:f7f0) Built 1 zonelists Kernel command line: root=/dev/hda1 console=ttyS0,19200n8 astlinux=net4801 astkd=/dev/sda1 ide=nodma ide_setup: ide=nodma : Prevented DMA Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) scx200hr: timer not yet accessible; will probe later. Detected 266.663 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 127028k/131072k available (1418k kernel code, 3624k reserved, 557k data, 116k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 534.33 BogoMIPS (lpj=267167) Mount-cache hash table entries: 512 CPU: NSC Unknown stepping 01 Checking 'hlt' instruction... OK. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.01 entry at 0xf7861, last bus=0 PCI: Using configuration type 1 Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: PnP BIOS support was not detected. SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware TC classifier action (bugs to [EMAIL PROTECTED] cc [EMAIL PROTECTED]) scx200: NatSemi SCx200 Driver scx200: GPIO base 0x6100 scx200: Configuration Block base 0x6000 switching to scx200 high-resolution timer (255961 cpt) Initializing Cryptographic API io scheduler noop registered io scheduler cfq registered (default) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac PNP: No PS/2 controller found. Probing ports directly. i8042.c: Can't read CTR while initializing i8042. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SC1200: IDE controller at PCI slot :00:12.2 SC1200: chipset revision 1 SC1200: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio hdb: TRANSCEND, ATA DISK drive SC1200: set xfer mode failure ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdb: max request size: 128KiB hdb: 1993824 sectors (1020 MB) w/1KiB Cache, CHS=1978/16/63 hdb: hdb1 ohci_hcd :00:13..0: OHCI Host Controller ohci_hcd :00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd :00:13.0: irq 11, io mem 0xa0003000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode VFS: Cannot open root device "hda1" or unknown-block(0,0) Please append a correct "root=" boot option Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) Any idea?? I downloaded the latest image from sourceforget.net, also I tried to build it using ADE but something is wrong. James Haayen __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com - This SF.