Re: [aur-general] Copy package from AUR archive

[Eli Schwartz via aur-general]

On 10/01/2016 09:55 AM, Yassine Imounachen via aur-general wrote:
> Thank you everybody this is very clear. Sorry I did inadvertently enable
> 'daily digest' , this is what explains my late response.
> 
> On 1 Oct 2016 9:07 am,  wrote:

[...]

>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of aur-general digest..."

Note the instructions in the daily digest. Using a completely, utterly
meaningless subject line is not conducive to effective communications.

Ideally you would respond In-Reply-To the original message rather than
the digest, in order to keep like subjects grouped together in a single
thread. But at a minimum, please use meaningful subject lines...

-- 
Eli Schwartz

Re: [aur-general] I can't upgrade my package

[Juan Martínez]

El sáb, 01-10-2016 a las 21:56 +0200, Lukas Fleischer escribió:
> On Sat, 01 Oct 2016 at 21:34:02, Lukas Fleischer wrote:
> > 
> > Note the additional hyphen. One could argue that git-serve should
> > support both notations, however, for a short-term fix, you should
> > figure
> > out why Git sends `git receive-pack` instead of `git-receive-pack`.
> Even better: I just added a patch to support `git receive-pack` to
> our
> live setup. Please try again.
You are such an amazing guy.

You have all the power!

Thanks, very much. And thanks to everybody else who tried to help me
too.

And again, sorry for my english!
-- 
Juan Martínez 


signature.asc
Description: This is a digitally signed message part

Re: [aur-general] I can't upgrade my package

[Lukas Fleischer]

On Sat, 01 Oct 2016 at 21:34:02, Lukas Fleischer wrote:
> Note the additional hyphen. One could argue that git-serve should
> support both notations, however, for a short-term fix, you should figure
> out why Git sends `git receive-pack` instead of `git-receive-pack`.

Even better: I just added a patch to support `git receive-pack` to our
live setup. Please try again.

Re: [aur-general] I can't upgrade my package

[Lukas Fleischer]

On Sat, 01 Oct 2016 at 21:07:29, Juan Martínez wrote:
> [...]
> debug1: Remote: Forced command.
> debug1: Remote: Port forwarding disabled.
> debug1: Remote: X11 forwarding disabled.
> debug1: Remote: PTY allocation disabled.
> debug1: Remote: Forced command.
> debug1: Remote: Port forwarding disabled.
> debug1: Remote: X11 forwarding disabled.
> debug1: Remote: PTY allocation disabled.
> debug1: Sending environment.
> debug1: Sending env LANG = es_AR.UTF-8
> debug1: Sending command: git receive-pack '/with-git.git'

Ok, this is what I thought. This line should be

debug1: Sending command: git-receive-pack '/with-git.git'

Note the additional hyphen. One could argue that git-serve should
support both notations, however, for a short-term fix, you should figure
out why Git sends `git receive-pack` instead of `git-receive-pack`.

The output of `git config -l` might be useful. In particular, you want
to look for remote..receivepack in that list. Or maybe something
adds --receive-pack to the `git push` command.

Regards,
Lukas

Re: [aur-general] I can't upgrade my package

[Juan Martínez]

El sáb, 01-10-2016 a las 21:04 +0200, Lukas Fleischer escribió:
> On Sat, 01 Oct 2016 at 20:38:11, Juan Martínez wrote:
> > 
> > El sáb, 01-10-2016 a las 20:25 +0200, Lukas Fleischer escribió:
> > > 
> > > On Sat, 01 Oct 2016 at 19:57:55, Juan Martínez wrote:
> > [...]
> > Arch:
> > git version 2.10.0
> > 
> > Lubuntu (also tried from here since i have the same keys and all):
> > git version 2.7.4
> Could you run `GIT_SSH_COMMAND="ssh -v" git push` instead of `git
> push`
> and paste the output, please?
[mrat@mrat with-git]$ GIT_SSH_COMMAND="ssh -v" git push
OpenSSH_7.2p2 Ubuntu-4ubuntu2.1, OpenSSL 1.0.2g  1 Mar 2016
debug1: Reading configuration data /home/mrat/.ssh/config
debug1: /home/mrat/.ssh/config line 1: Applying options for
aur.archlinux.org
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug1: Connecting to aur.archlinux.org [5.9.250.164] port 22.
debug1: Connection established.
debug1: identity file /home/mrat/.ssh/aur type 1
debug1: key_load_public: No such file or directory
debug1: identity file /home/mrat/.ssh/aur-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_7.2p2 Ubuntu-4ubuntu2.1
debug1: Remote protocol version 2.0, remote software version
OpenSSH_7.3
debug1: match: OpenSSH_7.3 pat OpenSSH* compat 0x0400
debug1: Authenticating to aur.archlinux.org:22 as 'aur'
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: algorithm: curve25519-sha...@libssh.org
debug1: kex: host key algorithm: ecdsa-sha2-nistp256
debug1: kex: server->client cipher: aes128-ctr MAC: umac-64-etm@openssh
.com compression: none
debug1: kex: client->server cipher: aes128-ctr MAC: umac-64-etm@openssh
.com compression: none
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: ecdsa-sha2-nistp256
SHA256:L71Q91yHwmHPYYkJMDgj0xmUuw16qFOhJbBr1mzsiOI
debug1: Host 'aur.archlinux.org' is known and matches the ECDSA host
key.
debug1: Found key in /home/mrat/.ssh/known_hosts:1
debug1: rekey after 4294967296 blocks
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: rekey after 4294967296 blocks
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_EXT_INFO received
debug1: kex_input_ext_info: server-sig-algs=
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey
debug1: Next authentication method: publickey
debug1: Offering RSA public key: /home/mrat/.ssh/aur
debug1: Server accepts key: pkalg rsa-sha2-512 blen 279
Enter passphrase for key '/home/mrat/.ssh/aur': 
debug1: Authentication succeeded (publickey).
Authenticated to aur.archlinux.org ([5.9.250.164]:22).
debug1: channel 0: new [client-session]
debug1: Requesting no-more-sessi...@openssh.com
debug1: Entering interactive session.
debug1: pledge: network
debug1: client_input_global_request: rtype hostkeys...@openssh.com
want_reply 0
debug1: Remote: Forced command.
debug1: Remote: Port forwarding disabled.
debug1: Remote: X11 forwarding disabled.
debug1: Remote: PTY allocation disabled.
debug1: Remote: Forced command.
debug1: Remote: Port forwarding disabled.
debug1: Remote: X11 forwarding disabled.
debug1: Remote: PTY allocation disabled.
debug1: Sending environment.
debug1: Sending env LANG = es_AR.UTF-8
debug1: Sending command: git receive-pack '/with-git.git'
invalid command: git
Try `ssh a...@aur.archlinux.org help` for a list of commands.
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug1: client_input_channel_req: channel 0 rtype e...@openssh.com reply
0
debug1: channel 0: free: client-session, nchannels 1
debug1: fd 0 clearing O_NONBLOCK
debug1: fd 1 clearing O_NONBLOCK
Transferred: sent 2752, received 3296 bytes, in 0.6 seconds
Bytes per second: sent 4309.6, received 5161.5
debug1: Exit status 1
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

I'm doing this from the Lubuntu (which as i said share keys with my
Arch). If you want it, i can try it from Arch too.
-- 
Juan Martínez 


signature.asc
Description: This is a digitally signed message part

Re: [aur-general] I can't upgrade my package

[Lukas Fleischer]

On Sat, 01 Oct 2016 at 20:38:11, Juan Martínez wrote:
> El sáb, 01-10-2016 a las 20:25 +0200, Lukas Fleischer escribió:
> > On Sat, 01 Oct 2016 at 19:57:55, Juan Martínez wrote:
> [...]
> Arch:
> git version 2.10.0
> 
> Lubuntu (also tried from here since i have the same keys and all):
> git version 2.7.4

Could you run `GIT_SSH_COMMAND="ssh -v" git push` instead of `git push`
and paste the output, please?

Re: [aur-general] I can't upgrade my package

[Juan Martínez]

El sáb, 01-10-2016 a las 20:44 +0200, Uwe via aur-general escribió:
> Anything in .ssh/config that isn't on the wiki?
As i showed it in my first mail: no, nothing different.
-- 
Juan Martínez 


signature.asc
Description: This is a digitally signed message part

Re: [aur-general] I can't upgrade my package

[Uwe via aur-general]

Anything in .ssh/config that isn't on the wiki?

Re: [aur-general] I can't upgrade my package

[Juan Martínez]

El sáb, 01-10-2016 a las 20:34 +0200, Martin Kühne via aur-general
escribió:
> Ah, never mind. The one you already posted looks okay.
> You are running git push while in the repository directory, right?
> 
> cheers!
> mar77i
Yes, I do
-- 
Juan Martínez 


signature.asc
Description: This is a digitally signed message part

Re: [aur-general] I can't upgrade my package

[Juan Martínez]

El sáb, 01-10-2016 a las 20:25 +0200, Lukas Fleischer escribió:
> On Sat, 01 Oct 2016 at 19:57:55, Juan Martínez wrote:
> > 
> > El sáb, 01-10-2016 a las 12:53 -0500, Doug Newgard escribió:
> > > 
> > > On Sat, 01 Oct 2016 14:42:22 -0300
> > > Juan Martínez  wrote:
> > [...]
> > [mrat@mrat with-git]$ git push
> > Enter passphrase for key '/home/mrat/.ssh/aur': 
> > invalid command: git
> > Try `ssh a...@aur.archlinux.org help` for a list of commands.
> > fatal: Could not read from remote repository.
> > 
> > Please make sure you have the correct access rights
> > and the repository exists.
> Are you using any special Git implementation? Any wrappers around
> Git?
> Any aliases? What is the output of `git --version`?
Arch:
git version 2.10.0

Lubuntu (also tried from here since i have the same keys and all):
git version 2.7.4

Also:
[mrat@mrat with-git]$ git remote show origin
Enter passphrase for key '/home/mrat/.ssh/aur': 
* remote origin
  Fetch URL: ssh://a...@aur.archlinux.org/with-git.git
  Push  URL: ssh://a...@aur.archlinux.org/with-git.git
  HEAD branch: master
  Remote branch:
master tracked
  Local branch configured for 'git pull':
master merges with remote master
  Local ref configured for 'git push':
master pushes to master (fast-forwardable)

-- 
Juan Martínez 


signature.asc
Description: This is a digitally signed message part

Re: [aur-general] I can't upgrade my package

[Martin Kühne via aur-general]

Ah, never mind. The one you already posted looks okay.
You are running git push while in the repository directory, right?

cheers!
mar77i

Re: [aur-general] I can't upgrade my package

[Martin Kühne via aur-general]

Could you please tell us the url you have in the output of the
following command?
$ git remote show origin

cheers!
mar77i

Re: [aur-general] I can't upgrade my package

[Juan Martínez]

El sáb, 01-10-2016 a las 12:53 -0500, Doug Newgard escribió:
> On Sat, 01 Oct 2016 14:42:22 -0300
> Juan Martínez  wrote:
> 
> > 
> > Hello aur-general! And first of all, i'm sorry
> > 
> > I'm sorry because maybe you actually talked about this and i didn't
> > looked at it because i'm lazy and deleted some e-mails without
> > reading
> > them.
> > 
> > I have a package in AUR (with-git).
> > And i want to update it because it had an error and also it's a
> > good
> > moment to update the version number.
> > 
> > I did the changes, git add, git commit, but when it's git push
> > time:
> > invalid command: git
> > Try `ssh a...@aur.archlinux.org help` for a list of commands.
> > fatal: Could not read from remote repository.
> > 
> > Please make sure you have the correct access rights
> > and the repository exists.
> > 
> > So i cloned again the repository using the ssh did all the changes
> > again, tried it again and I got the same error.
> > 
> > Then i did ssh a...@aur.archlinux.org list-repos:
> > minirc-git
> > python-q
> > with-git
> > 
> > So, it seems it's okay.
> > And when i use :
> > ssh a...@aur.archlinux.org git-upload-pack
> > It just take more than 20 minutes until i kill it because it can't
> > take
> > that long.
> > 
> > Also, 
> > git remote --verbose:
> > origin  ssh://a...@aur.archlinux.org/with-git.git (fetch)
> > origin  ssh://a...@aur.archlinux.org/with-git.git (push)
> > 
> > And,
> > cat .ssh/config:
> > Host aur.archlinux.org
> >   IdentityFile ~/.ssh/aur
> >   User aur
> > 
> > I just surrendered at that moment because, well, it was 5:45 am and
> > i
> > thought "Damn, i'll ask in the mailing list". So, that's why i'm
> > writing here.
> > Maybe my question is silly, and i'm sorry but i just don't know
> > what
> > i'm doing wrong.
> > 
> > (Sorry for my english too)
> > 
> Sounds like you're using ssh then git. Don't. Just use git push.

No, what i exactly do is:
git push

I tried it again after you answered and i got the same error.

[mrat@mrat with-git]$ git push
Enter passphrase for key '/home/mrat/.ssh/aur': 
invalid command: git
Try `ssh a...@aur.archlinux.org help` for a list of commands.
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

-- 
Juan Martínez 


signature.asc
Description: This is a digitally signed message part

Re: [aur-general] I can't upgrade my package

[Doug Newgard]

On Sat, 01 Oct 2016 14:42:22 -0300
Juan Martínez  wrote:

> Hello aur-general! And first of all, i'm sorry
> 
> I'm sorry because maybe you actually talked about this and i didn't
> looked at it because i'm lazy and deleted some e-mails without reading
> them.
> 
> I have a package in AUR (with-git).
> And i want to update it because it had an error and also it's a good
> moment to update the version number.
> 
> I did the changes, git add, git commit, but when it's git push time:
>   invalid command: git
>   Try `ssh a...@aur.archlinux.org help` for a list of commands.
>   fatal: Could not read from remote repository.
> 
>   Please make sure you have the correct access rights
>   and the repository exists.
> 
> So i cloned again the repository using the ssh did all the changes
> again, tried it again and I got the same error.
> 
> Then i did ssh a...@aur.archlinux.org list-repos:
>   minirc-git
>   python-q
>   with-git
> 
> So, it seems it's okay.
> And when i use :
> ssh a...@aur.archlinux.org git-upload-pack
> It just take more than 20 minutes until i kill it because it can't take
> that long.
> 
> Also, 
> git remote --verbose:
>   origin  ssh://a...@aur.archlinux.org/with-git.git (fetch)
>   origin  ssh://a...@aur.archlinux.org/with-git.git (push)
> 
> And,
> cat .ssh/config:
>   Host aur.archlinux.org
>     IdentityFile ~/.ssh/aur
>     User aur
> 
> I just surrendered at that moment because, well, it was 5:45 am and i
> thought "Damn, i'll ask in the mailing list". So, that's why i'm
> writing here.
> Maybe my question is silly, and i'm sorry but i just don't know what
> i'm doing wrong.
> 
> (Sorry for my english too)
> 

Sounds like you're using ssh then git. Don't. Just use git push.

[aur-general] I can't upgrade my package

[Juan Martínez]

Hello aur-general! And first of all, i'm sorry

I'm sorry because maybe you actually talked about this and i didn't
looked at it because i'm lazy and deleted some e-mails without reading
them.

I have a package in AUR (with-git).
And i want to update it because it had an error and also it's a good
moment to update the version number.

I did the changes, git add, git commit, but when it's git push time:
invalid command: git
Try `ssh a...@aur.archlinux.org help` for a list of commands.
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

So i cloned again the repository using the ssh did all the changes
again, tried it again and I got the same error.

Then i did ssh a...@aur.archlinux.org list-repos:
minirc-git
python-q
with-git

So, it seems it's okay.
And when i use :
ssh a...@aur.archlinux.org git-upload-pack
It just take more than 20 minutes until i kill it because it can't take
that long.

Also, 
git remote --verbose:
origin  ssh://a...@aur.archlinux.org/with-git.git (fetch)
origin  ssh://a...@aur.archlinux.org/with-git.git (push)

And,
cat .ssh/config:
Host aur.archlinux.org
  IdentityFile ~/.ssh/aur
  User aur

I just surrendered at that moment because, well, it was 5:45 am and i
thought "Damn, i'll ask in the mailing list". So, that's why i'm
writing here.
Maybe my question is silly, and i'm sorry but i just don't know what
i'm doing wrong.

(Sorry for my english too)

-- 
Juan Martínez 


signature.asc
Description: This is a digitally signed message part

Re: [aur-general] aur-general Digest, Vol 144, Issue 1

[Yassine Imounachen via aur-general]

Thank you everybody this is very clear. Sorry I did inadvertently enable
'daily digest' , this is what explains my late response.

On 1 Oct 2016 9:07 am,  wrote:

> Send aur-general mailing list submissions to
> aur-general@archlinux.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.archlinux.org/listinfo/aur-general
> or, via email, send a message with subject or body 'help' to
> aur-general-requ...@archlinux.org
>
> You can reach the person managing the list at
> aur-general-ow...@archlinux.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of aur-general digest..."
>
>
> Today's Topics:
>
>1. Copy package from AUR archive (Yassine Imounachen)
>2. Re: Copy package from AUR archive (Noel Kuntze)
>3. Re: Copy package from AUR archive (Eli Schwartz)
>4. Re: Copy package from AUR archive (Yassine Imounachen)
>5. Re: Copy package from AUR archive (Martin K?hne)
>6. Re: Copy package from AUR archive (Eli Schwartz)
>7. Signoff report for [community-testing] (Arch Website Notification)
>
>
> --
>
> Message: 1
> Date: Fri, 30 Sep 2016 18:43:39 +0100
> From: Yassine Imounachen 
> To: aur-general@archlinux.org
> Subject: [aur-general] Copy package from AUR archive
> Message-ID:
>  gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> Hello,
> What are good practices of re-submitting deleted AUR3 packages? Namely
> 'strongswan-git'.
>
>
> --
>
> Message: 2
> Date: Fri, 30 Sep 2016 19:49:54 +0200
> From: Noel Kuntze 
> To: aur-general@archlinux.org
> Subject: Re: [aur-general] Copy package from AUR archive
> Message-ID: <86ec4d32-0a36-48b7-6890-04b6671c2...@familie-kuntze.de>
> Content-Type: text/plain; charset="utf-8"
>
> On 30.09.2016 19:43, Yassine Imounachen via aur-general wrote:
> > Hello,
> > What are good practices of re-submitting deleted AUR3 packages? Namely
> > 'strongswan-git'.
> >
>
> Hello Yassine,
>
> For strongSwan, a git package (even though there existed one once) does
> not make sense, because the git master branch is relatively unstable.
> If you actually want an up to date strongSwan package that is usable,
> you need to curate the commits.
>
> Just follow the best practices that are outlined on the wiki[1].
>
> [1] https://wiki.archlinux.org/index.php/Arch_packaging_standards
>
> --
>
> Mit freundlichen Gr??en/Kind Regards,
> Noel Kuntze
>
> GPG Key ID: 0x63EC6658
> Fingerprint: 23CA BB60 2146 05E7 7278 6592 3839 298F 63EC 6658
>
>
> -- next part --
> A non-text attachment was scrubbed...
> Name: signature.asc
> Type: application/pgp-signature
> Size: 833 bytes
> Desc: OpenPGP digital signature
> URL:  attachments/20160930/6f8b2fa9/attachment-0001.asc>
>
> --
>
> Message: 3
> Date: Fri, 30 Sep 2016 14:33:55 -0400
> From: Eli Schwartz 
> To: aur-general@archlinux.org
> Subject: Re: [aur-general] Copy package from AUR archive
> Message-ID: <6b060dfc-d157-2a10-a886-f3605ff32...@gmail.com>
> Content-Type: text/plain; charset=utf-8
>
> On 09/30/2016 01:43 PM, Yassine Imounachen via aur-general wrote:
> > Hello,
> > What are good practices of re-submitting deleted AUR3 packages? Namely
> > 'strongswan-git'.
> >
>
> There are no official good practices, but IMPHO, all packages migrated
> from the AUR3 (whether deleted or not) *should* have had their history
> migrated from the aur-mirror archive (assuming a more accurate history
> didn't exist in the maintainer's control).
>
> To that end, I wrote a quick script for importing an AUR3 package, you
> can see it in my pkgbuilds repo: https://github.com/eli-schwartz/pkgbuilds
>
> It isn't very polished, but it is better than nothing.
>
> ...
>
> Other than my subjective opinion about AUR3 history, the rules for
> submitting a deleted AUR3 package are of course the same rules as for
> submitting a brand-new package
>
> --
> Eli Schwartz
>
>
> --
>
> Message: 4
> Date: Fri, 30 Sep 2016 20:22:33 +0100
> From: Yassine Imounachen 
> To: aur-general@archlinux.org
> Subject: Re: [aur-general] Copy package from AUR archive
> Message-ID:
>  mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> OK what I did really mean is how to update it
>
> On 30 Sep 2016 6:43 pm, "Yassine Imounachen"  wrote:
>
> > Hello,
> > What are good practices of re-submitting deleted AUR3 packages? Namely
> > 'strongswan-git'.
> >
>
>
> --
>
> Message: 5
> Date: Fri, 30 Sep 2016 21:31:33 +0200
> From: Martin K?hne 

[aur-general] Signoff report for [community-testing]

[Arch Website Notification]

=== Signoff report for [community-testing] ===
https://www.archlinux.org/packages/signoffs/

There are currently:
* 4 new packages in last 24 hours
* 0 known bad packages
* 0 packages not accepting signoffs
* 1 fully signed off package
* 14 packages missing signoffs
* 10 packages older than 14 days

(Note: the word 'package' as used here refers to packages as grouped by
pkgbase, architecture, and repository; e.g., one PKGBUILD produces one
package per architecture, even if it is a split package.)


== New packages in [community-testing] in last 24 hours (4 total) ==

* gnome-packagekit-3.22.0-1 (i686)
* gnome-software-3.22.0+23+g9812711-1 (i686)
* gnome-packagekit-3.22.0-1 (x86_64)
* gnome-software-3.22.0+23+g9812711-1 (x86_64)


== Incomplete signoffs for [community] (14 total) ==

* luarocks-2.4.0-1 (any)
0/2 signoffs
* bluegriffon-2.1.1-3 (i686)
0/1 signoffs
* gnome-packagekit-3.22.0-1 (i686)
0/1 signoffs
* gnome-software-3.22.0+23+g9812711-1 (i686)
0/1 signoffs
* iscan-2.30.2-1 (i686)
0/1 signoffs
* luasec-2:0.6-1 (i686)
0/1 signoffs
* powerdns-recursor-4.0.2-1 (i686)
0/1 signoffs
* prosody-0.10.r7656+.296543556065+-1 (i686)
0/1 signoffs
* bluegriffon-2.1.1-3 (x86_64)
0/2 signoffs
* gnome-packagekit-3.22.0-1 (x86_64)
0/2 signoffs
* gnome-software-3.22.0+23+g9812711-1 (x86_64)
0/2 signoffs
* iscan-2.30.2-1 (x86_64)
0/2 signoffs
* powerdns-recursor-4.0.2-1 (x86_64)
0/2 signoffs
* prosody-0.10.r7656+.296543556065+-1 (x86_64)
0/2 signoffs


== Completed signoffs (1 total) ==

* luasec-2:0.6-1 (x86_64)


== All packages in [community-testing] for more than 14 days (10 total) ==

* iscan-2.30.2-1 (x86_64), since 2016-07-10
* iscan-2.30.2-1 (i686), since 2016-07-10
* luasec-2:0.6-1 (i686), since 2016-07-14
* luasec-2:0.6-1 (x86_64), since 2016-07-14
* powerdns-recursor-4.0.2-1 (i686), since 2016-08-30
* powerdns-recursor-4.0.2-1 (x86_64), since 2016-08-30
* prosody-0.10.r7656+.296543556065+-1 (i686), since 2016-09-05
* prosody-0.10.r7656+.296543556065+-1 (x86_64), since 2016-09-05
* bluegriffon-2.1.1-3 (i686), since 2016-09-10
* bluegriffon-2.1.1-3 (x86_64), since 2016-09-10


== Top five in signoffs in last 24 hours ==

1. yan12125 - 4 signoffs