Re: [Aus-soaring] Air brake handles

[tom . wilksch]

Thanks for all the replies, they have been very helpful.
I should have been more specific, these are to be used on a PC control
unit I'm putting together, rather than an actual aircraft. I don't
think there are any good options for airbrakes and flaps at the moment
when flying sims, so decided to come up with something myself
Cheers
Tom 

- Original Message -
From: "Discussion of issues relating to Soaring in Australia." 
To:"Discussion of issues relating to Soaring in Australia." 
Cc:
Sent:Sun, 4 Jun 2017 20:52:38 +1000
Subject:Re: [Aus-soaring] Air brake handles

Agree with Bob and bike grips
 The Germans often use blue handles off skiing stocks. The slot at
back is for the strap. Also stick grips are black ski stock handles
again with slot for strap.   Sometimes a bit hard to find in some
areas in Australia.  At corner store in Germany. 
 Some gliders like all Astir's use the black ski stocks but these can
easily come off stick in flight. There is an AD on some models of
astirs(not all but should Be) the the grip coming off. I always add a
3mm SS screw at base of grip as fools in the past have put their head
through the canopy and then I had to flop some perspex and glue in a
30cm circle.  Adding  the screw before the head goes through canopy
 is much easier!!  
 Ian McPhee  0428847642  Box 657 Byron Bay NSW 2481 Australia  

On 4 Jun 2017 19:38, "Bob Ward"  wrote:
Tom,

 Airbrake handles are no problem, as blue bicycle grip s will do the
job.
 Available from any bicycle retailer.  Trim knobs? A little more
difficult,
 unless you can describe the shape of the original.
 Typically, these control knobs have a 6 mm internal thread which is a
metal
 insert into the plastic grip Any handy person with access to a lathe
could
 produce such an insert, which would then be epoxied into a suitable
knob.
 such as a green plastic ball. I think that most commercial glider
facilities
 would have expertise to the skills require for the fabrication of a
trim
 knob. I hope this helps you.
 What I have described applieS to a glass fibre gliderS. IF YOU NEED
HANDLES
 FOR OLDER STEEL TUBE FUSELAGES, THEN PLEASE GET BACK TO ME OFF LINE.

 regards
 Bob Ward

 -Original Message- From: Tom Wilksch
 Sent: Sunday, June 04, 2017 5:54 PM
 To: Discussion of issues relating to Soaring in Australia.
 Subject: [Aus-soaring] Air brake handles

 Afternoon all

 Could anybody advise a good place to purchase things like airbrake
handles
 and trim knobs?

 Thanks

 Tom W

 ___
 Aus-soaring mailing list
Aus-soaring@lists.base64.com.au [2]
http://lists.base64.com.au/listinfo/aus-soaring [3] 
 ___
 Aus-soaring mailing list
Aus-soaring@lists.base64.com.au [4]
http://lists.base64.com.au/listinfo/aus-soaring [5]
   

Links:
--
[1] mailto:wendo...@westnet.com.au
[2] mailto:Aus-soaring@lists.base64.com.au
[3] http://lists.base64.com.au/listinfo/aus-soaring
[4] mailto:Aus-soaring@lists.base64.com.au
[5] http://lists.base64.com.au/listinfo/aus-soaring

___
Aus-soaring mailing list
Aus-soaring@lists.base64.com.au
http://lists.base64.com.au/listinfo/aus-soaring

Re: [Aus-soaring] Air brake handles

[tom . wilksch]

Exactly what I was looking for, thanks!
It's not actually for an aircraft, I should have been more specific.
It's for a PC control unit I'm putting together to replicate airbrakes
and flaps, since I don't think anything good exists at the moment 
Cheers
Tom 

- Original Message -
From: "Discussion of issues relating to Soaring in Australia." 
To:"Discussion of issues relating to Soaring in Australia." 
Cc:
Sent:Sun, 4 Jun 2017 20:32:46 +0930
Subject:Re: [Aus-soaring] Air brake handles

 I have used some from

 https://www.minibearings.com.au/store/categories/knobs+ball+categories/


 Anthony

 -Original Message-
 From: Aus-soaring [mailto:aus-soaring-boun...@lists.base64.com.au] On
Behalf
 Of Bob Ward
 Sent: Sunday, 4 June 2017 7:08 PM
 To: Discussion of issues relating to Soaring in Australia.

 Subject: Re: [Aus-soaring] Air brake handles

 Tom,

 Airbrake handles are no problem, as blue bicycle grip s will do the
job.
 Available from any bicycle retailer. Trim knobs? A little more
difficult,
 unless you can describe the shape of the original.
 Typically, these control knobs have a 6 mm internal thread which is a
metal
 insert into the plastic grip Any handy person with access to a lathe
could
 produce such an insert, which would then be epoxied into a suitable
knob.
 such as a green plastic ball. I think that most commercial glider
facilities
 would have expertise to the skills require for the fabrication of a
trim
 knob. I hope this helps you.
 What I have described applieS to a glass fibre gliderS. IF YOU NEED
HANDLES
 FOR OLDER STEEL TUBE FUSELAGES, THEN PLEASE GET BACK TO ME OFF LINE.

 regards
 Bob Ward

 -Original Message-
 From: Tom Wilksch
 Sent: Sunday, June 04, 2017 5:54 PM
 To: Discussion of issues relating to Soaring in Australia.
 Subject: [Aus-soaring] Air brake handles

 Afternoon all

 Could anybody advise a good place to purchase things like airbrake
handles
 and trim knobs?

 Thanks

 Tom W

 ___
 Aus-soaring mailing list
 Aus-soaring@lists.base64.com.au
 http://lists.base64.com.au/listinfo/aus-soaring 

 ___
 Aus-soaring mailing list
 Aus-soaring@lists.base64.com.au
 http://lists.base64.com.au/listinfo/aus-soaring

 ___
 Aus-soaring mailing list
 Aus-soaring@lists.base64.com.au
 http://lists.base64.com.au/listinfo/aus-soaring

___
Aus-soaring mailing list
Aus-soaring@lists.base64.com.au
http://lists.base64.com.au/listinfo/aus-soaring

Re: [Aus-soaring] Air brake handles

[Anthony Smith]

I have used some from

https://www.minibearings.com.au/store/categories/knobs+ball+categories/ 

Anthony

-Original Message-
From: Aus-soaring [mailto:aus-soaring-boun...@lists.base64.com.au] On Behalf
Of Bob Ward
Sent: Sunday, 4 June 2017 7:08 PM
To: Discussion of issues relating to Soaring in Australia.

Subject: Re: [Aus-soaring] Air brake handles

Tom,

Airbrake handles are no problem, as blue bicycle grip s will do the job.
Available from any bicycle retailer.  Trim knobs? A little more difficult,
unless you can describe the shape of the original.
Typically, these control knobs have a 6 mm internal thread which is a metal
insert into the plastic grip Any handy person with access to a lathe could
produce such an insert, which would then be epoxied into a suitable knob.
such as a green plastic ball. I think that most commercial glider facilities
would have expertise to the skills require for the fabrication of a trim
knob. I hope this helps you.
What I have described applieS to a glass fibre gliderS. IF YOU NEED HANDLES
FOR OLDER STEEL TUBE FUSELAGES, THEN PLEASE GET BACK TO ME OFF LINE.

regards
Bob Ward

-Original Message-
From: Tom Wilksch
Sent: Sunday, June 04, 2017 5:54 PM
To: Discussion of issues relating to Soaring in Australia.
Subject: [Aus-soaring] Air brake handles

Afternoon all

Could anybody advise a good place to purchase things like airbrake handles
and trim knobs?

Thanks

Tom W

___
Aus-soaring mailing list
Aus-soaring@lists.base64.com.au
http://lists.base64.com.au/listinfo/aus-soaring 

___
Aus-soaring mailing list
Aus-soaring@lists.base64.com.au
http://lists.base64.com.au/listinfo/aus-soaring

___
Aus-soaring mailing list
Aus-soaring@lists.base64.com.au
http://lists.base64.com.au/listinfo/aus-soaring

Re: [Aus-soaring] Air brake handles

[Ian Mc Phee]

Agree with Bob and bike grips

The Germans often use blue handles off skiing stocks. The slot at back is
for the strap. Also stick grips are black ski stock handles again with slot
for strap.   Sometimes a bit hard to find in some areas in Australia.  At
corner store in Germany.

Some gliders like all Astir's use the black ski stocks but these can easily
come off stick in flight. There is an AD on some models of astirs(not all
but should Be) the the grip coming off. I always add a 3mm SS screw at base
of grip as fools in the past have put their head through the canopy and
then I had to flop some perspex and glue in a 30cm circle.  Adding  the
screw before the head goes through canopy  is much easier!!

Ian McPhee
0428847642
Box 657 Byron Bay NSW 2481 Australia



On 4 Jun 2017 19:38, "Bob Ward"  wrote:

> Tom,
>
> Airbrake handles are no problem, as blue bicycle grip s will do the job.
> Available from any bicycle retailer.  Trim knobs? A little more difficult,
> unless you can describe the shape of the original.
> Typically, these control knobs have a 6 mm internal thread which is a metal
> insert into the plastic grip Any handy person with access to a lathe could
> produce such an insert, which would then be epoxied into a suitable knob.
> such as a green plastic ball. I think that most commercial glider
> facilities
> would have expertise to the skills require for the fabrication of a trim
> knob. I hope this helps you.
> What I have described applieS to a glass fibre gliderS. IF YOU NEED HANDLES
> FOR OLDER STEEL TUBE FUSELAGES, THEN PLEASE GET BACK TO ME OFF LINE.
>
> regards
> Bob Ward
>
> -Original Message- From: Tom Wilksch
> Sent: Sunday, June 04, 2017 5:54 PM
> To: Discussion of issues relating to Soaring in Australia.
> Subject: [Aus-soaring] Air brake handles
>
> Afternoon all
>
> Could anybody advise a good place to purchase things like airbrake handles
> and trim knobs?
>
> Thanks
>
> Tom W
>
> ___
> Aus-soaring mailing list
> Aus-soaring@lists.base64.com.au
> http://lists.base64.com.au/listinfo/aus-soaring
> ___
> Aus-soaring mailing list
> Aus-soaring@lists.base64.com.au
> http://lists.base64.com.au/listinfo/aus-soaring
>
___
Aus-soaring mailing list
Aus-soaring@lists.base64.com.au
http://lists.base64.com.au/listinfo/aus-soaring

Re: [Aus-soaring] Air brake handles

[Bob Ward]

Tom,

Airbrake handles are no problem, as blue bicycle grip s will do the job.
Available from any bicycle retailer.  Trim knobs? A little more difficult,
unless you can describe the shape of the original.
Typically, these control knobs have a 6 mm internal thread which is a metal
insert into the plastic grip Any handy person with access to a lathe could
produce such an insert, which would then be epoxied into a suitable knob.
such as a green plastic ball. I think that most commercial glider facilities
would have expertise to the skills require for the fabrication of a trim
knob. I hope this helps you.
What I have described applieS to a glass fibre gliderS. IF YOU NEED HANDLES
FOR OLDER STEEL TUBE FUSELAGES, THEN PLEASE GET BACK TO ME OFF LINE.

regards
Bob Ward

-Original Message- 
From: Tom Wilksch

Sent: Sunday, June 04, 2017 5:54 PM
To: Discussion of issues relating to Soaring in Australia.
Subject: [Aus-soaring] Air brake handles

Afternoon all

Could anybody advise a good place to purchase things like airbrake handles
and trim knobs?

Thanks

Tom W

___
Aus-soaring mailing list
Aus-soaring@lists.base64.com.au
http://lists.base64.com.au/listinfo/aus-soaring 


___
Aus-soaring mailing list
Aus-soaring@lists.base64.com.au
http://lists.base64.com.au/listinfo/aus-soaring

[Aus-soaring] Air brake handles

[Tom Wilksch]

Afternoon all

Could anybody advise a good place to purchase things like airbrake handles 
and trim knobs?


Thanks

Tom W 


___
Aus-soaring mailing list
Aus-soaring@lists.base64.com.au
http://lists.base64.com.au/listinfo/aus-soaring