Re: [Axapta-Knowledge-Village] Refill by item rather than warehouse
Hi James, This functionality is there in Standard Dynamics AX. In such cases where the refilling warehouse should be applicable for some specific items, refilling warehouse should not be defined at the warehouse master. In this case, you have to follow the path: Basic requirement / Setup: For the item for which you want to define the refilling warehouse, for those items, covergae plan check box should be ticked on the dimension group (attached to this item) -- warehouse. Path: Inventory module -- Item master -- Select the item for which you want to set this option -- Setup button Under setup button there is option -- Item coverage. On this form, select the warehouse (WH1) for which you want to define the refilling warehouse on Overview tab On General tab -- under group Main warehouse, set the field value of Refilling = Always and Define the refilling warehouse to the field Main warehouse (RWH2). Check this out. This will perhaps resolve your query / issue. In case any further query, you can contact. Thanks, Ashwani Jain - Original Message From: James Flavell [EMAIL PROTECTED] To: Axapta-Knowledge-Village@yahoogroups.com Sent: Tuesday, 30 September, 2008 6:48:41 PM Subject: [Axapta-Knowledge-Village] Refill by item rather tahn warehouse Good evening all Just wondering has anyone attempted to change master planning such that refill (planned transfer orders) are only done for certain items rather than all items in a warehouse? I want to be able to set on the item master whether refill orders should be done for the item such that the logic in master planning is: If warehouse is set as refill and item allows refill then create planned transfer order else No planned transfer order (so later master planning will just plan a purchase order at the first warehouse) Again Harry or anyone else with hints where to start looking in the code would be highly appreciated :) Also anyone who tried and gave up? Thanks James Bollywood news, movie reviews, film trailers and more! Go to http://in.movies.yahoo.com/
RE: [Axapta-Knowledge-Village] Refill by item rather than warehouse
hi I read the scenario as follows: Warehouse MW and GW...An order has been placed for an item on warehouse MW. MW has also been set up to refill from GW. However, a transfer order from GW to MW should only be generated if there is enough stock in GW otherwise a planned purchase order on MW should be generated. regards harry From: Axapta-Knowledge-Village@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of ASHWANI JAIN Sent: Tuesday, September 30, 2008 10:12 AM To: Axapta-Knowledge-Village@yahoogroups.com Subject: Re: [Axapta-Knowledge-Village] Refill by item rather than warehouse Hi James, This functionality is there in Standard Dynamics AX. In such cases where the refilling warehouse should be applicable for some specific items, refilling warehouse should not be defined at the warehouse master. In this case, you have to follow the path: Basic requirement / Setup: For the item for which you want to define the refilling warehouse, for those items, covergae plan check box should be ticked on the dimension group (attached to this item) -- warehouse. Path: Inventory module -- Item master -- Select the item for which you want to set this option -- Setup button Under setup button there is option -- Item coverage. On this form, select the warehouse (WH1) for which you want to define the refilling warehouse on Overview tab On General tab -- under group Main warehouse, set the field value of Refilling = Always and Define the refilling warehouse to the field Main warehouse (RWH2). Check this out. This will perhaps resolve your query / issue. In case any further query, you can contact. Thanks, Ashwani Jain - Original Message From: James Flavell [EMAIL PROTECTED] To: Axapta-Knowledge-Village@yahoogroups.com Sent: Tuesday, 30 September, 2008 6:48:41 PM Subject: [Axapta-Knowledge-Village] Refill by item rather tahn warehouse Good evening all Just wondering has anyone attempted to change master planning such that refill (planned transfer orders) are only done for certain items rather than all items in a warehouse? I want to be able to set on the item master whether refill orders should be done for the item such that the logic in master planning is: If warehouse is set as refill and item allows refill then create planned transfer order else No planned transfer order (so later master planning will just plan a purchase order at the first warehouse) Again Harry or anyone else with hints where to start looking in the code would be highly appreciated :) Also anyone who tried and gave up? Thanks James Add more friends to your messenger and enjoy! Invite them now.http://in.rd.yahoo.com/tagline_messenger_6/*http:/messenger.yahoo.com/invite/
Re: [Axapta-Knowledge-Village] Refill by item rather than warehouse
Hi Harry, In this case, system will not help as per standard axapta. This will have to be customized then. As per standard Axapta, system considers the refilling warehouse as Supplying warehouse and warehouse against which this requirement is defined as Demanding warehouse. So in case of Demand / supply, system always create some process (Transfer order in this case). And if the stock is not available at Supplying warehouse, then system will create PO requirement at Supplying warehouse. System will always create this transfer order, even if the stock will not be available at supplying warehouse. Thanks, Ashwani Jain - Original Message From: Harry Deshpande [EMAIL PROTECTED] To: Axapta-Knowledge-Village@yahoogroups.com Axapta-Knowledge-Village@yahoogroups.com Sent: Tuesday, 30 September, 2008 10:46:50 PM Subject: RE: [Axapta-Knowledge-Village] Refill by item rather than warehouse hi I read the scenario as follows: Warehouse MW and GW...An order has been placed for an item on warehouse MW. MW has also been set up to refill from GW. However, a transfer order from GW to MW should only be generated if there is enough stock in GW otherwise a planned purchase order on MW should be generated. regards harry From:Axapta-Knowledge- [EMAIL PROTECTED] ups.com [mailto:Axapta- Knowledge- [EMAIL PROTECTED] ups.com] On Behalf Of ASHWANI JAIN Sent: Tuesday, September 30, 2008 10:12 AM To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Subject: Re: [Axapta-Knowledge- Village] Refill by item rather than warehouse Hi James, This functionality is there in Standard Dynamics AX. In such cases where the refilling warehouse should be applicable for some specific items, refilling warehouse should not be defined at the warehouse master. In this case, you have to follow the path: Basic requirement / Setup: For the item for which you want to define the refilling warehouse, for those items, covergae plan check box should be ticked on the dimension group (attached to this item) -- warehouse. Path: Inventory module -- Item master -- Select the item for which you want to set this option -- Setup button Under setup button there is option -- Item coverage. On this form, select the warehouse (WH1) for which you want to define the refilling warehouse on Overview tab On General tab -- under group Main warehouse, set the field value of Refilling = Always and Define the refilling warehouse to the field Main warehouse (RWH2). Check this out. This will perhaps resolve your query / issue. In case any further query, you can contact. Thanks, Ashwani Jain - Original Message From: James Flavell [EMAIL PROTECTED] com To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Sent: Tuesday, 30 September, 2008 6:48:41 PM Subject: [Axapta-Knowledge- Village] Refill by item rather tahn warehouse Good evening all Just wondering has anyone attempted to change master planning such that refill (planned transfer orders) are only done for certain items rather than all items in a warehouse? I want to be able to set on the item master whether refill orders should be done for the item such that the logic in master planning is: If warehouse is set as refill and item allows refill then create planned transfer order else No planned transfer order (so later master planning will just plan a purchase order at the first warehouse) Again Harry or anyone else with hints where to start looking in the code would be highly appreciated :) Also anyone who tried and gave up? Thanks James Add more friends to your messenger and enjoy! Invite them now. Unlimited freedom, unlimited storage. Get it now, on http://help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html/
RE: [Axapta-Knowledge-Village] Refill by item rather than warehouse
Thats exactly what my first email was about :) This can only be achieved thru customization. From: Axapta-Knowledge-Village@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of ASHWANI JAIN Sent: Tuesday, September 30, 2008 10:27 AM To: Axapta-Knowledge-Village@yahoogroups.com Subject: Re: [Axapta-Knowledge-Village] Refill by item rather than warehouse Hi Harry, In this case, system will not help as per standard axapta. This will have to be customized then. As per standard Axapta, system considers the refilling warehouse as Supplying warehouse and warehouse against which this requirement is defined as Demanding warehouse. So in case of Demand / supply, system always create some process (Transfer order in this case). And if the stock is not available at Supplying warehouse, then system will create PO requirement at Supplying warehouse. System will always create this transfer order, even if the stock will not be available at supplying warehouse. Thanks, Ashwani Jain - Original Message From: Harry Deshpande [EMAIL PROTECTED] To: Axapta-Knowledge-Village@yahoogroups.com Axapta-Knowledge-Village@yahoogroups.com Sent: Tuesday, 30 September, 2008 10:46:50 PM Subject: RE: [Axapta-Knowledge-Village] Refill by item rather than warehouse hi I read the scenario as follows: Warehouse MW and GW...An order has been placed for an item on warehouse MW. MW has also been set up to refill from GW. However, a transfer order from GW to MW should only be generated if there is enough stock in GW otherwise a planned purchase order on MW should be generated. regards harry From: Axapta-Knowledge- [EMAIL PROTECTED] ups.com [mailto:Axapta- Knowledge- [EMAIL PROTECTED] ups.com] On Behalf Of ASHWANI JAIN Sent: Tuesday, September 30, 2008 10:12 AM To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Subject: Re: [Axapta-Knowledge- Village] Refill by item rather than warehouse Hi James, This functionality is there in Standard Dynamics AX. In such cases where the refilling warehouse should be applicable for some specific items, refilling warehouse should not be defined at the warehouse master. In this case, you have to follow the path: Basic requirement / Setup: For the item for which you want to define the refilling warehouse, for those items, covergae plan check box should be ticked on the dimension group (attached to this item) -- warehouse. Path: Inventory module -- Item master -- Select the item for which you want to set this option -- Setup button Under setup button there is option -- Item coverage. On this form, select the warehouse (WH1) for which you want to define the refilling warehouse on Overview tab On General tab -- under group Main warehouse, set the field value of Refilling = Always and Define the refilling warehouse to the field Main warehouse (RWH2). Check this out. This will perhaps resolve your query / issue. In case any further query, you can contact. Thanks, Ashwani Jain - Original Message From: James Flavell [EMAIL PROTECTED] com To: Axapta-Knowledge- [EMAIL PROTECTED] ups.com Sent: Tuesday, 30 September, 2008 6:48:41 PM Subject: [Axapta-Knowledge- Village] Refill by item rather tahn warehouse Good evening all Just wondering has anyone attempted to change master planning such that refill (planned transfer orders) are only done for certain items rather than all items in a warehouse? I want to be able to set on the item master whether refill orders should be done for the item such that the logic in master planning is: If warehouse is set as refill and item allows refill then create planned transfer order else No planned transfer order (so later master planning will just plan a purchase order at the first warehouse) Again Harry or anyone else with hints where to start looking in the code would be highly appreciated :) Also anyone who tried and gave up? Thanks James Add more friends to your messenger and enjoy! Invite them now.http://in.rd.yahoo.com/tagline_messenger_6/*http:/messenger.yahoo.com/invite/ Be the first one to try the new Messenger 9 Beta! Click here.http://in.rd.yahoo.com/tagline_messenger_7/*http:/in.messenger.yahoo.com/win/
RE: [Axapta-Knowledge-Village] Refill by item rather than warehouse
Thanks Ashwani Jain this is what I wanted (been a long day so I think my eyes and brain could not see the setting when I was looking through the item coverage options) Harry your hint about being able to change the planned order type if there is no stock is not yet required but could possibly pop up later in this project (or other projects) so thanks again I will keep it handy Thanks again for your time and replies James _ From: Axapta-Knowledge-Village@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of ASHWANI JAIN Sent: 01 October 2008 01:12 To: Axapta-Knowledge-Village@yahoogroups.com Subject: Re: [Axapta-Knowledge-Village] Refill by item rather than warehouse Hi James, This functionality is there in Standard Dynamics AX. In such cases where the refilling warehouse should be applicable for some specific items, refilling warehouse should not be defined at the warehouse master. In this case, you have to follow the path: Basic requirement / Setup: For the item for which you want to define the refilling warehouse, for those items, covergae plan check box should be ticked on the dimension group (attached to this item) -- warehouse. Path: Inventory module -- Item master -- Select the item for which you want to set this option -- Setup button Under setup button there is option -- Item coverage. On this form, select the warehouse (WH1) for which you want to define the refilling warehouse on Overview tab On General tab -- under group Main warehouse, set the field value of Refilling = Always and Define the refilling warehouse to the field Main warehouse (RWH2). Check this out. This will perhaps resolve your query / issue. In case any further query, you can contact. Thanks, Ashwani Jain - Original Message From: James Flavell [EMAIL PROTECTED] To: Axapta-Knowledge-Village@yahoogroups.com Sent: Tuesday, 30 September, 2008 6:48:41 PM Subject: [Axapta-Knowledge-Village] Refill by item rather tahn warehouse Good evening all Just wondering has anyone attempted to change master planning such that refill (planned transfer orders) are only done for certain items rather than all items in a warehouse? I want to be able to set on the item master whether refill orders should be done for the item such that the logic in master planning is: If warehouse is set as refill and item allows refill then create planned transfer order else No planned transfer order (so later master planning will just plan a purchase order at the first warehouse) Again Harry or anyone else with hints where to start looking in the code would be highly appreciated :) Also anyone who tried and gave up? Thanks James _ Add more friends to your messenger and enjoy! Invite http://in.rd.yahoo.com/tagline_messenger_6/*http://messenger.yahoo.com/invi te/ them now.
