[beagleboard] BB-RELAY-4PORT overlay

[Peter Lawler]

Hi folks,
Having a brain fade moment I think.

I'm interested utilising in the BB-RELAY-4PORT overlay, so I've loaded 
it up.


# cat /sys/devices/platform/bone_capemgr/slots
 0: PF  -1
 1: PF  -1
 2: PF  -1
 3: PF  -1
 9: P-O-L-   0 Override Board Name,00A0,Override Manuf,BB-RELAY-4PORT


Thing is, I was kind of expecting the GPIO pins to become available 
similar if I had "echo PIN_NUMBER > /sys/class/gpio/export"


But that doesn't seem to be the case. There's nothing there.

# ls /sys/class/gpio/
exportgpiochip0  gpiochip32  gpiochip64  gpiochip96  unexport

What (apart from a clue) am I missing? Does the overlay merely configure 
the hardware for exclusive use and I still have to initialise via 
C/C++/Bash etc. (ie, Linux itself doesn't pick up the hardware config 
and do this for me)?


Thanks in advance,

Pete.

--
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.

To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/571DA46E.1080906%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] problem to install gnuplot on Debian OS using BBB

[Nurul Ainiza]

how to connect bbb to wifi by using the usb adapter?
how to configure the wifi?


On Mon, Apr 25, 2016 at 8:30 AM, Nurul Ainiza 
wrote:

> is there any problem if i connnected both?? should be ok if i connect
> BBB's by using the power suppy 5v and connect usb to my laptop?
>
> On Fri, Apr 22, 2016 at 9:45 PM, Przemek Klosowski <
> przemek.klosow...@gmail.com> wrote:
>
>> [image: Boxbe]  This message is eligible
>> for Automatic Cleanup! (przemek.klosow...@gmail.com) Add cleanup rule
>> 
>> | More info
>> 
>>
>>
>>
>> On Fri, Apr 22, 2016 at 3:33 AM, Nurul Ainiza 
>> wrote:
>>
>>
>>> I install gnuplot in debian OS
>>>
>>> - sudo apt-get update && upgrade
>>> - sudo apt-get install gnuplot
>>> - sudo apt-get install  gnuplot-x11
>>>
>>>
>>> i am a newbie BBB. i had a problem where my BBB is idle power off. when
 i want to install the gnuplot the BBB will automatically turn off. i had
 done so many time. what should i do? do u guys have the same problem?



>>> I think you are powering up your BBB from USB, which is enough to boot
>> and run idle, but when you're starting to use the network and write to the
>> eMMC storage you run out of power and the system shuts down. That's why
>> Gerald recommended a dedicated power supply.
>>
>> --
>> For more options, visit http://beagleboard.org/discuss
>> ---
>> You received this message because you are subscribed to a topic in the
>> Google Groups "BeagleBoard" group.
>> To unsubscribe from this topic, visit
>> https://groups.google.com/d/topic/beagleboard/N4TtEOJXPjM/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to
>> beagleboard+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/beagleboard/CAC%3D1GgE6RsXJ0y-POZ018p6tZndJf48Uc_ju2%2BtAV42sXd-MgQ%40mail.gmail.com
>> 
>> .
>> For more options, visit https://groups.google.com/d/optout.
>>
>>
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAEs7TzGkYEe%2BhtXvdW-pHzpTvcd%2BzBgGcMbPBFkR1-x9Ov5kKA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] Re: MotorBridgeCape and Not Working/Seth

[Mala Dies]

On Sunday, April 24, 2016 at 8:30:55 PM UTC-5, Mala Dies wrote:
>
> Hello,
>
> I have tried to use my MotorBridgeCape from the BBG and SeeedStudio.com. I 
> have been unsuccessful so far. I read some forum at SeeedStudio.com but I 
> have been unable to understand why something they typed up in 2014 does not 
> currently work (04/2016).
>
> Now, here are some photographs to better assist in the idea behind why I 
> cannot get my Cape to work on the BBG. Oh and I had to use WinSCP to change 
> the file names in the Linux system because when I unzip their .zip file to 
> update firmware on the MotorBridgeCape, I get loads of errors. The error I 
> really got was a space when the file name was listed under "ls". I would 
> use "ls" to read my files in that specific directory (home) and the .zip 
> file that was unzipped looked like this Motor Bridge Cape v1.0 when it 
> needed to look like Motor_Bridge_Cape_v1.0. Anyway, their .zip file was 
> junk. Does anyone know what to do from here? 
>

> Here goes it:
>
>
> 
>
>
> and...
>
>
> 
>
>
> and...
>
>
> 
>
> Now...
>
> With these three images, hopefully someone out there can offer assistance.
>
> Seth
>
> P.S. If you need any other info, please contact me.
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/787f1923-bc3d-414f-8340-7243a8feb3a4%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] RE: MotorBridgeCape and Not Working/Seth

[Mala Dies]

Hello,

I have tried to use my MotorBridgeCape from the BBG and SeeedStudio.com. I 
have been unsuccessful so far. I read some forum at SeeedStudio.com but I 
have been unable to understand why something they typed up in 2014 does not 
currently work (04/2016).

Now, here are some photographs to better assist in the idea behind why I 
cannot get my Cape to work on the BBG. Oh and I had to use WinSCP to change 
the file names in the Linux system because when I unzip their .zip file to 
update firmware on the MotorBridgeCape, I get loads of errors.

Here goes it:




and...




and...



Now...

With these three images, hopefully someone out there can offer assistance.

Seth

P.S. If you need any other info, please contact me.

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/5220e098-d99b-4ee2-ac13-e149c27c3d0d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] problem to install gnuplot on Debian OS using BBB

[Nurul Ainiza]

is there any problem if i connnected both?? should be ok if i connect BBB's
by using the power suppy 5v and connect usb to my laptop?

On Fri, Apr 22, 2016 at 9:45 PM, Przemek Klosowski <
przemek.klosow...@gmail.com> wrote:

> [image: Boxbe]  This message is eligible
> for Automatic Cleanup! (przemek.klosow...@gmail.com) Add cleanup rule
> 
> | More info
> 
>
>
>
> On Fri, Apr 22, 2016 at 3:33 AM, Nurul Ainiza 
> wrote:
>
>
>> I install gnuplot in debian OS
>>
>> - sudo apt-get update && upgrade
>> - sudo apt-get install gnuplot
>> - sudo apt-get install  gnuplot-x11
>>
>>
>> i am a newbie BBB. i had a problem where my BBB is idle power off. when i
>>> want to install the gnuplot the BBB will automatically turn off. i had done
>>> so many time. what should i do? do u guys have the same problem?
>>>
>>>
>>>
>> I think you are powering up your BBB from USB, which is enough to boot
> and run idle, but when you're starting to use the network and write to the
> eMMC storage you run out of power and the system shuts down. That's why
> Gerald recommended a dedicated power supply.
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to a topic in the
> Google Groups "BeagleBoard" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/beagleboard/N4TtEOJXPjM/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> beagleboard+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/beagleboard/CAC%3D1GgE6RsXJ0y-POZ018p6tZndJf48Uc_ju2%2BtAV42sXd-MgQ%40mail.gmail.com
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAEs7TzEGokrGcc4t7whOnAwf85xp3GQcgC0SyfFXJBS05CxYKA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] Audio via HDMI on Debian image 2016-01-24

[Bill Barnett]

Attached my android phone to the cable - it has a micro hdmi port - and
listened to a youtube video on the monitor.  The cable and monitor check
out.

On Sun, Apr 24, 2016 at 4:32 PM, Bill Barnett 
wrote:

> Thank you Gerald.  I meant to include the partial listing of uEnv.txt:
>
> #In the event of edid real failures, uncomment this next line:
> cmdline=coherent_pool=1M quiet cape_universal=enable
> video=HDMI-A-1:1280x720@60e
>
>
>
> On Sun, Apr 24, 2016 at 4:17 PM, Gerald Coley 
> wrote:
>
>> Note that only certain resolutions support Audio.
>>
>>
>> http://www.elinux.org/Beagleboard:BeagleBoneBlack_HDMI#Supported_Resolutions
>>
>>
>> Gerald
>>
>>
>> On Sun, Apr 24, 2016 at 4:02 PM, Bill Barnett 
>> wrote:
>>
>>> I am unable to send audio over HDMI to my monitor.
>>>
>>> The video is active over HDMI and the volume is turned up.
>>>
>>> Results from various commands:
>>>
>>> Debian Image 2016-01-24
>>>
>>> /sys/devices/platform/bone_capemgr/slots
>>>  0: PF  -1
>>>  1: PF  -1
>>>  2: PF  -1
>>>  3: PF  -1
>>>  4: P-O-L-   0 Override Board Name,00A0,Override Manuf,cape-universaln
>>>
>>> I have also tried replacing overlay 4 with cape-univ-hdmi with same
>>> results.
>>>
>>> cat /proc/asound/pcm
>>> 00-00: HDMI hdmi-hifi-0 :  : playback 1 : capture 1
>>>
>>>  aplay -l
>>>   List of PLAYBACK Hardware Devices 
>>> card 0: Black [TI BeagleBone Black], device 0: HDMI hdmi-hifi-0 []
>>>   Subdevices: 1/1
>>>   Subdevice #0: subdevice #0
>>>
>>> "amixer -c 0" and "amixer -c 0 controls" has no output
>>>
>>> "speaker-test -D plughw:0,0 -c2" creates no sound.
>>>
>>> Thank you,,,
>>>
>>> Bill Barnett
>>>
>>> --
>>> For more options, visit http://beagleboard.org/discuss
>>> ---
>>> You received this message because you are subscribed to the Google
>>> Groups "BeagleBoard" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to beagleboard+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/beagleboard/CAP4vyaeOLigicCjYd1%2BP9cFUGtmPQrAfsJbps4u2JNZfuwtusQ%40mail.gmail.com
>>> 
>>> .
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>
>>
>>
>> --
>> Gerald
>>
>> ger...@beagleboard.org
>> http://beagleboard.org/
>> gcol...@emprodesign.com
>>
>> --
>> For more options, visit http://beagleboard.org/discuss
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "BeagleBoard" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to beagleboard+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/beagleboard/CAHK_S%2Bc%2BF0zydENMpb-OH10G4VdCgy1UXGdygPSNcY56D-VHzw%40mail.gmail.com
>> 
>> .
>> For more options, visit https://groups.google.com/d/optout.
>>
>
>
>
> --
>
> Bill Barnett
>
>


-- 

Bill Barnett

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAP4vyadz3DJJfi2wv5Z8XODMKr5A8t2iqttADFWV-Fd02TbFgA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] Re: What? Linux development on windows... and arm support

[William Hermans]

>
> *IRC this is line Wine but for running commandline Ubuntu on Windows.  Any
> developer with half a brain wouldn't want to mess with that when it costs
> them nothing to run full Linux on the PC.  One would really have to be a
> diehard Windows fanatic to want to stay caged up in Microsoft code to do
> Linux development.*
>

There are many reason for a developer to want to use Windows. Whether or
not you, I, or anyone else agrees or not whether those reason are valid(
only for us, as individuals ) is another story.

I actually write my code for Linux in an editor running in Windows. But
that code, stays on, and is compiled on that Linux system. So, you can try
to be all evangelistic and *try* to tell me what I'm doing is wrong. No
matter what you say however would be wrong. Period. Anyway, I've been using
this setup, or one near it for years, and it has worked well for me.

Compared to Linux, Windows may have many problems. But when it comes to the
desktop experience, Linux has a long way to go in order to catch up.

On Sun, Apr 24, 2016 at 2:25 PM, William Hermans  wrote:

> https://plus.google.com/106867156582775247949/posts/GDckiZH6cCC
>
> On Sun, Apr 24, 2016 at 9:02 AM, doog  wrote:
>
>> IIRC this is line Wine but for running commandline Ubuntu on Windows.
>> Any developer with half a brain wouldn't want to mess with that when it
>> costs them nothing to run full Linux on the PC.  One would really have to
>> be a diehard Windows fanatic to want to stay caged up in Microsoft code to
>> do Linux development.
>>
>> --
>> For more options, visit http://beagleboard.org/discuss
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "BeagleBoard" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to beagleboard+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/beagleboard/1df11f1c-c79a-4d0d-9ead-02c2bf2a26b5%40googlegroups.com
>> 
>> .
>>
>> For more options, visit https://groups.google.com/d/optout.
>>
>
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CALHSORp1XKjewoZgHSwKF9VzwYTdvGzO%3DGWu5%3DmPRhsy72xD%3DQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] Audio via HDMI on Debian image 2016-01-24

[Bill Barnett]

Thank you Gerald.  I meant to include the partial listing of uEnv.txt:

#In the event of edid real failures, uncomment this next line:
cmdline=coherent_pool=1M quiet cape_universal=enable
video=HDMI-A-1:1280x720@60e



On Sun, Apr 24, 2016 at 4:17 PM, Gerald Coley 
wrote:

> Note that only certain resolutions support Audio.
>
>
> http://www.elinux.org/Beagleboard:BeagleBoneBlack_HDMI#Supported_Resolutions
>
>
> Gerald
>
>
> On Sun, Apr 24, 2016 at 4:02 PM, Bill Barnett 
> wrote:
>
>> I am unable to send audio over HDMI to my monitor.
>>
>> The video is active over HDMI and the volume is turned up.
>>
>> Results from various commands:
>>
>> Debian Image 2016-01-24
>>
>> /sys/devices/platform/bone_capemgr/slots
>>  0: PF  -1
>>  1: PF  -1
>>  2: PF  -1
>>  3: PF  -1
>>  4: P-O-L-   0 Override Board Name,00A0,Override Manuf,cape-universaln
>>
>> I have also tried replacing overlay 4 with cape-univ-hdmi with same
>> results.
>>
>> cat /proc/asound/pcm
>> 00-00: HDMI hdmi-hifi-0 :  : playback 1 : capture 1
>>
>>  aplay -l
>>   List of PLAYBACK Hardware Devices 
>> card 0: Black [TI BeagleBone Black], device 0: HDMI hdmi-hifi-0 []
>>   Subdevices: 1/1
>>   Subdevice #0: subdevice #0
>>
>> "amixer -c 0" and "amixer -c 0 controls" has no output
>>
>> "speaker-test -D plughw:0,0 -c2" creates no sound.
>>
>> Thank you,,,
>>
>> Bill Barnett
>>
>> --
>> For more options, visit http://beagleboard.org/discuss
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "BeagleBoard" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to beagleboard+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/beagleboard/CAP4vyaeOLigicCjYd1%2BP9cFUGtmPQrAfsJbps4u2JNZfuwtusQ%40mail.gmail.com
>> 
>> .
>> For more options, visit https://groups.google.com/d/optout.
>>
>
>
>
> --
> Gerald
>
> ger...@beagleboard.org
> http://beagleboard.org/
> gcol...@emprodesign.com
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to beagleboard+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/beagleboard/CAHK_S%2Bc%2BF0zydENMpb-OH10G4VdCgy1UXGdygPSNcY56D-VHzw%40mail.gmail.com
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>



-- 

Bill Barnett

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAP4vyaejomWraCzk%2B8jSFX8NzabY9i_bib6XFAdAONTTXEcvRA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] Re: What? Linux development on windows... and arm support

[William Hermans]

https://plus.google.com/106867156582775247949/posts/GDckiZH6cCC

On Sun, Apr 24, 2016 at 9:02 AM, doog  wrote:

> IIRC this is line Wine but for running commandline Ubuntu on Windows.  Any
> developer with half a brain wouldn't want to mess with that when it costs
> them nothing to run full Linux on the PC.  One would really have to be a
> diehard Windows fanatic to want to stay caged up in Microsoft code to do
> Linux development.
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to beagleboard+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/beagleboard/1df11f1c-c79a-4d0d-9ead-02c2bf2a26b5%40googlegroups.com
> 
> .
>
> For more options, visit https://groups.google.com/d/optout.
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CALHSORrtr4AV_tmwEAwZ%3Di3MfHgr8v5ykA%3D8yzPtKaED5fioMg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] Audio via HDMI on Debian image 2016-01-24

[Gerald Coley]

Note that only certain resolutions support Audio.

http://www.elinux.org/Beagleboard:BeagleBoneBlack_HDMI#Supported_Resolutions


Gerald


On Sun, Apr 24, 2016 at 4:02 PM, Bill Barnett 
wrote:

> I am unable to send audio over HDMI to my monitor.
>
> The video is active over HDMI and the volume is turned up.
>
> Results from various commands:
>
> Debian Image 2016-01-24
>
> /sys/devices/platform/bone_capemgr/slots
>  0: PF  -1
>  1: PF  -1
>  2: PF  -1
>  3: PF  -1
>  4: P-O-L-   0 Override Board Name,00A0,Override Manuf,cape-universaln
>
> I have also tried replacing overlay 4 with cape-univ-hdmi with same
> results.
>
> cat /proc/asound/pcm
> 00-00: HDMI hdmi-hifi-0 :  : playback 1 : capture 1
>
>  aplay -l
>   List of PLAYBACK Hardware Devices 
> card 0: Black [TI BeagleBone Black], device 0: HDMI hdmi-hifi-0 []
>   Subdevices: 1/1
>   Subdevice #0: subdevice #0
>
> "amixer -c 0" and "amixer -c 0 controls" has no output
>
> "speaker-test -D plughw:0,0 -c2" creates no sound.
>
> Thank you,,,
>
> Bill Barnett
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to beagleboard+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/beagleboard/CAP4vyaeOLigicCjYd1%2BP9cFUGtmPQrAfsJbps4u2JNZfuwtusQ%40mail.gmail.com
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>



-- 
Gerald

ger...@beagleboard.org
http://beagleboard.org/
gcol...@emprodesign.com

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAHK_S%2Bc%2BF0zydENMpb-OH10G4VdCgy1UXGdygPSNcY56D-VHzw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] Re: Play audio throuhg HDMI on BeagleBone Black

[Robert Nelson]

On Sun, Apr 24, 2016 at 4:01 PM, Robert Nelson 
wrote:

>
>
> On Sun, Apr 24, 2016 at 2:52 PM, Joe Julian  wrote:
>
>> As far as I can tell, based on
>> https://github.com/archlinuxarm/PKGBUILDs/blob/master/core/linux-am33x/PKGBUILD,
>> the Arch Linux kernel I'm using *should* have all the necessary patches
>> to make this work with 4.5.2. Unfortunately it's not. aplay -l still shows
>> no drivers.
>>
>
> That patchset doesn't include hdmi audio for the beaglebone black..
>
>
>> @RobertCNelson do you see anything wrong with that patch set that might
>> be a problem? I'd really prefer to use Arch since the package versions are
>> new enough to support some of the features I'm trying to implement.
>>
>
> Please see my previous statement, "NOTHING" has changed since then, and
> you can confirm that by looking at linux-next:
>
>
> https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/log/arch/arm/boot/dts/am335x-boneblack.dts
>

The last rfc was posted here:

https://www.spinics.net/lists/alsa-devel/msg48476.html

Regards,

-- 
Robert Nelson
https://rcn-ee.com/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAOCHtYhwQ6KcDMDP500ZKONHUVnrok%3DqEJ0Tevewz%2B_%3D6yFLAQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] Audio via HDMI on Debian image 2016-01-24

[Bill Barnett]

I am unable to send audio over HDMI to my monitor.

The video is active over HDMI and the volume is turned up.

Results from various commands:

Debian Image 2016-01-24

/sys/devices/platform/bone_capemgr/slots
 0: PF  -1
 1: PF  -1
 2: PF  -1
 3: PF  -1
 4: P-O-L-   0 Override Board Name,00A0,Override Manuf,cape-universaln

I have also tried replacing overlay 4 with cape-univ-hdmi with same results.

cat /proc/asound/pcm
00-00: HDMI hdmi-hifi-0 :  : playback 1 : capture 1

 aplay -l
  List of PLAYBACK Hardware Devices 
card 0: Black [TI BeagleBone Black], device 0: HDMI hdmi-hifi-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

"amixer -c 0" and "amixer -c 0 controls" has no output

"speaker-test -D plughw:0,0 -c2" creates no sound.

Thank you,,,

Bill Barnett

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAP4vyaeOLigicCjYd1%2BP9cFUGtmPQrAfsJbps4u2JNZfuwtusQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] Re: Play audio throuhg HDMI on BeagleBone Black

[Robert Nelson]

On Sun, Apr 24, 2016 at 2:52 PM, Joe Julian  wrote:

> As far as I can tell, based on
> https://github.com/archlinuxarm/PKGBUILDs/blob/master/core/linux-am33x/PKGBUILD,
> the Arch Linux kernel I'm using *should* have all the necessary patches
> to make this work with 4.5.2. Unfortunately it's not. aplay -l still shows
> no drivers.
>

That patchset doesn't include hdmi audio for the beaglebone black..


> @RobertCNelson do you see anything wrong with that patch set that might be
> a problem? I'd really prefer to use Arch since the package versions are new
> enough to support some of the features I'm trying to implement.
>

Please see my previous statement, "NOTHING" has changed since then, and you
can confirm that by looking at linux-next:

https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/log/arch/arm/boot/dts/am335x-boneblack.dts

Regards,

-- 
Robert Nelson
https://rcn-ee.com/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAOCHtYjcjNAiJ7ZhBC7gbDeWGd7zpY9y8eG0Df91Zku%3DXhBLWQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] Re: Play audio throuhg HDMI on BeagleBone Black

[Joe Julian]

As far as I can tell, based 
on 
https://github.com/archlinuxarm/PKGBUILDs/blob/master/core/linux-am33x/PKGBUILD,
 
the Arch Linux kernel I'm using *should* have all the necessary patches to 
make this work with 4.5.2. Unfortunately it's not. aplay -l still shows no 
drivers.

@RobertCNelson do you see anything wrong with that patch set that might be 
a problem? I'd really prefer to use Arch since the package versions are new 
enough to support some of the features I'm trying to implement.

I do, of course, have the correct resolution and I confirmed the edid does 
have the audio block.

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/d657b060-4d2a-442f-9f8a-caf5b95f0b07%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] Re: Play audio throuhg HDMI on BeagleBone Black

[Joe Julian]

On Tuesday, March 22, 2016 at 9:35:54 AM UTC-7, RobertCNelson wrote:
>
> On Tue, Mar 22, 2016 at 11:31 AM,   
> wrote: 
>
> HDMI audio is in patch hell on mainline, if you want to use "4.1.x" 
> with hdmi audio you need to use the ti branch: 
>
>
>
Do you  have a reference?

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/6a5d7e32-2886-421e-b611-67a3468c4652%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] Re: What? Linux development on windows... and arm support

[doog]

IIRC this is line Wine but for running commandline Ubuntu on Windows.  Any 
developer with half a brain wouldn't want to mess with that when it costs 
them nothing to run full Linux on the PC.  One would really have to be a 
diehard Windows fanatic to want to stay caged up in Microsoft code to do 
Linux development.

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/1df11f1c-c79a-4d0d-9ead-02c2bf2a26b5%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] Unable to enable BB-UART1 at boot time

[evilwulfie]

try

# #append this to the end of the single line of uEnv.txt (not on a new line):
# capemgr.enable_partno=BB-UART1





On 4/23/2016 10:00 AM, gopalkri...@gmail.com wrote:
> Hi!
> I am trying to enable BB-UART1 at boot time in BeagleBone Black but
> it's just not happening. Once the BBB is booted I can manually write
> "echo BB-UART1 > /sys/devices/bone_capemgr.*/slots"  in shell which
> enables the ttyO1. When I put this inside /etc/rc.local ttyO1 is not
> enabled at boot time contrary to what I expect. Also putting it in
> crontab with @reboot doesn't seem to work either. Please help.
> -- 
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google
> Groups "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to beagleboard+unsubscr...@googlegroups.com
> .
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/beagleboard/db5a0ef6-4cf9-4833-b520-ff64170ccf32%40googlegroups.com
> .
> For more options, visit https://groups.google.com/d/optout.



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/571CE586.2050200%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] FBIOPUT_VSCREENINFO invalid argument to ioctl on Linux beaglebone 3.8.13-bone70

[kjeldsen]

*Hi guys,*
I've got a Beabglebone black unning *Linux beaglebone 3.8.13-bone70. I'm 
trying to implement double buffering using virtual screensize, offsets, 
panning and vsync syncronization. However, ioctl calls fail 
because FBIOPUT_VSCREENINFO is not a valid argument. The quick test using 
fbset: "fbset -vyres 960".*

*As far as i can tell from others with the same issue, on other platforms, 
this is due to a limitation in the video driver, which brings me to my 
question(s):*

Has anyone else experienced this and is this a "known" issue? Has this been 
"fixed" in a later version of the video driver? I also noticed that ioctl 
returns -1 on FBIO_WAITFORVSYNC.

Thank you in advance!
Best regards,

Martin


-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/a3225abc-d363-4551-bb95-a34ae99302d5%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] Unable to enable BB-UART1 at boot time

[gopalkriagg]

Hi!
I am trying to enable BB-UART1 at boot time in BeagleBone Black but it's 
just not happening. Once the BBB is booted I can manually write "echo 
BB-UART1 > /sys/devices/bone_capemgr.*/slots"  in shell which enables the 
ttyO1. When I put this inside /etc/rc.local ttyO1 is not enabled at boot 
time contrary to what I expect. Also putting it in crontab with @reboot 
doesn't seem to work either. Please help.

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/db5a0ef6-4cf9-4833-b520-ff64170ccf32%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] What? Linux development on windows... and arm support

[Paul Wolfson]

We're singing from the same hymn sheet, J Dog.  For all the passion, blood
sweat and tears expended on the BeagleBone, it's not a production system.
I'm looking forward to Windows 10.3.2.2's release.  In the interim, I'm
content with a Powershell alias ssh = putty.exe.

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAKCWyna%2Botadv9h%3DY-i4jd%2BKJ%2BC5iBp7h%3DxOfDY9PXM1umtugQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] Eclipse with beaglebone black

[caonguyen1907]

Hello All,
I want to ask,I using eclipse program C for Beaglebone
But I unknown to use the library any  program C  for Beaglebone
I using Ubuntu.
Thanks All

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/25baca69-ede1-4dec-a8bd-099ead00e347%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] cmedia usb audio card and hdmi

[buckstucky]

I have a beaglebone black that I want to use for multimedia. Is there any 
way to use the HDMI video and  a usb cmedia card together.?
All of the instuctions say to disable the HDMI  (audio) via the uEnv.txt 
file however,  when you do this you also shut off the hdmi video also.  How 
can I use the C-media audio out card without shutting off the HDMI video.

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/841a2c49-6ffc-4f3b-98e0-e432c390f46a%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] how to get beaglebone for detecting high surveillance equipment

[Henry Wanyonyi]

how do i get the beaglebone app for detecting high surveillance equipment 
from this website?plus does it work on all computers or just linux?

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/84b11c27-18c1-4b58-8213-e44f67665207%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] What? Linux development on windows... and arm support

[J dog]

http://www.techradar.com/us/reviews/pc-mac/software/operating-systems/windows-10-1267364/review

On Sunday, April 24, 2016 at 6:39:28 AM UTC-4, J dog wrote:
>
> Lol,  Paul dont shoot the messenger,  if Microsoft is anything, its not on 
> time with its "stated"  releases and code quality. 
>
> On Sunday, April 24, 2016 at 6:22:57 AM UTC-4, Paul Wolfson wrote:
>>
>> Hi J dog:
>>
>> Would you be kind enough to post a reference to this capability?  I have 
>> the early preview tools for Windows 10 IoT, bash on NT, and the Android and 
>> Windows phone SDKs.  What I have is quite rough at this point, so I am 
>> surprised that a June or July 2016 release date is possible.
>>
>> Thanks,
>> Paul
>>
>> -
>> Paul Wolfson, Ph.D., TX LPI, #A17473
>> Dallas Legal Technology
>> 3402 Oak Grove Avenue, Suite 300-A
>> Dallas, Texas 75204-2353
>>
>>
>> *214-257-0984 (Tel)214-838-7220 (Fax)Send me an email.*
>> -
>> The contents of this email are confidential to the sender and the 
>> ordinary user of the email address to which it was addressed, and may also 
>> be privileged.  If you are not the addressee of the email, you may not 
>> copy, forward, disclose or otherwise use it or any part of it in any form 
>> whatsoever.  If you have received this email in error, please advise the 
>> sender at  214-257-0984.  Thank you.
>> -
>>
>> On Sun, Apr 24, 2016 at 3:12 AM, J dog  wrote:
>>
>>>Interesting report i read:At its last event, Microsoft unveiled 
>>> the Anniversary Update for Windows 10, presumably its public name for 
>>> Redstone (Phase One?). The update, likely to land in June or July 2016, is 
>>> replete with a suite of stylus-optimized apps and tools in Windows Ink, 
>>> Android notifications and a full-on Linux development environment built 
>>> right into the OS and extended support for ARM processors. 
>>>
>>> -- 
>>> For more options, visit http://beagleboard.org/discuss
>>> --- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "BeagleBoard" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to beagleboard...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/beagleboard/c20084e7-6c8f-4f37-a5f9-60e2cc7b9be8%40googlegroups.com
>>>  
>>> 
>>> .
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>
>>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/4f41b8ee-3c2a-4a90-853a-831051eef44b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] What? Linux development on windows... and arm support

[J dog]

Lol,  Paul dont shoot the messenger,  if Microsoft is anything, its not on 
time with its "stated"  releases and code quality. 

On Sunday, April 24, 2016 at 6:22:57 AM UTC-4, Paul Wolfson wrote:
>
> Hi J dog:
>
> Would you be kind enough to post a reference to this capability?  I have 
> the early preview tools for Windows 10 IoT, bash on NT, and the Android and 
> Windows phone SDKs.  What I have is quite rough at this point, so I am 
> surprised that a June or July 2016 release date is possible.
>
> Thanks,
> Paul
>
> -
> Paul Wolfson, Ph.D., TX LPI, #A17473
> Dallas Legal Technology
> 3402 Oak Grove Avenue, Suite 300-A
> Dallas, Texas 75204-2353
>
>
> *214-257-0984 (Tel)214-838-7220 (Fax)Send me an email. *
> -
> The contents of this email are confidential to the sender and the ordinary 
> user of the email address to which it was addressed, and may also be 
> privileged.  If you are not the addressee of the email, you may not copy, 
> forward, disclose or otherwise use it or any part of it in any form 
> whatsoever.  If you have received this email in error, please advise the 
> sender at  214-257-0984.  Thank you.
> -
>
> On Sun, Apr 24, 2016 at 3:12 AM, J dog  
> wrote:
>
>>Interesting report i read:At its last event, Microsoft unveiled 
>> the Anniversary Update for Windows 10, presumably its public name for 
>> Redstone (Phase One?). The update, likely to land in June or July 2016, is 
>> replete with a suite of stylus-optimized apps and tools in Windows Ink, 
>> Android notifications and a full-on Linux development environment built 
>> right into the OS and extended support for ARM processors. 
>>
>> -- 
>> For more options, visit http://beagleboard.org/discuss
>> --- 
>> You received this message because you are subscribed to the Google Groups 
>> "BeagleBoard" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to beagleboard...@googlegroups.com .
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/beagleboard/c20084e7-6c8f-4f37-a5f9-60e2cc7b9be8%40googlegroups.com
>>  
>> 
>> .
>> For more options, visit https://groups.google.com/d/optout.
>>
>
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/86e83e08-dd8c-49d1-baec-c9e8b83253e9%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] Re: What? Linux development on windows... and arm support

[J dog]

Seems microsoft is trying to stay relevant?  
Windows 10 is no longer just an operating system for 32 and 64-bit PCs. 
In recognizing there are many other OS's out there,  Its Microsoft's goal 
to allow developers to create Universal apps that will run not only on PCs, 
but on Arm based phones and tablets, Windows 10 for IoT devices and Xbox as 
well. 
 A new version of windows Phone will be available and If you know what Windows 
RT 

 was, 
then don't worry, because it's nothing like that, and major changes are 
coming. 

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/4198553c-16df-4b27-b70a-fefd49496df2%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] What? Linux development on windows... and arm support

[Paul Wolfson]

Hi J dog:

Would you be kind enough to post a reference to this capability?  I have
the early preview tools for Windows 10 IoT, bash on NT, and the Android and
Windows phone SDKs.  What I have is quite rough at this point, so I am
surprised that a June or July 2016 release date is possible.

Thanks,
Paul

-
Paul Wolfson, Ph.D., TX LPI, #A17473
Dallas Legal Technology
3402 Oak Grove Avenue, Suite 300-A
Dallas, Texas 75204-2353


*214-257-0984 (Tel)214-838-7220 (Fax)Send me an email. *
-
The contents of this email are confidential to the sender and the ordinary
user of the email address to which it was addressed, and may also be
privileged.  If you are not the addressee of the email, you may not copy,
forward, disclose or otherwise use it or any part of it in any form
whatsoever.  If you have received this email in error, please advise the
sender at  214-257-0984.  Thank you.
-

On Sun, Apr 24, 2016 at 3:12 AM, J dog  wrote:

>Interesting report i read:At its last event, Microsoft unveiled
> the Anniversary Update for Windows 10, presumably its public name for
> Redstone (Phase One?). The update, likely to land in June or July 2016, is
> replete with a suite of stylus-optimized apps and tools in Windows Ink,
> Android notifications and a full-on Linux development environment built
> right into the OS and extended support for ARM processors.
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to beagleboard+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/beagleboard/c20084e7-6c8f-4f37-a5f9-60e2cc7b9be8%40googlegroups.com
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAKCWynangQdH-fzVsMAyLaanKH_x%3DrcoXwB2Di3xdDCfY79Xzw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] What? Linux development on windows... and arm support

[J dog]

   Interesting report i read:At its last event, Microsoft unveiled the 
Anniversary Update for Windows 10, presumably its public name for Redstone 
(Phase One?). The update, likely to land in June or July 2016, is replete 
with a suite of stylus-optimized apps and tools in Windows Ink, Android 
notifications and a full-on Linux development environment built right into 
the OS and extended support for ARM processors. 

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/c20084e7-6c8f-4f37-a5f9-60e2cc7b9be8%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] SD card Image update through Network

[Virendra]

Hi,

I have an custom kernel image version 4.1 from Robert Nelson running in SD 
card. I have a requirement to update the image with next version of rootfs 
automatically through the network keeping the boot loader unchanged. Is 
there any link or documentation to upgrade the rootfs over the network.

Thanks for your help.

Veera

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/6613ee9b-f15e-4adf-892a-58803f692f07%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.