[beagleboard] Connecting beagle bone black to laptop LAN tthen to 3G USB data card
Hello, I have BBB, laptop with Vista & 3G datacard. I wan to connect beagle bone black to laptop then I wan to access internet connetion of laptop to with BBB. Currently following is status --- root@beaglebone:~# ping www.google.com ping: unknown host www.google.com root@beaglebone:~# ifconfig eth0 Link encap:Ethernet HWaddr 90:59:AF:57:42:18 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:56 loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1768 (1.7 KiB) TX bytes:1768 (1.7 KiB) usb0 Link encap:Ethernet HWaddr 8A:56:DB:0A:72:13 inet addr:192.168.7.2 Bcast:192.168.7.3 Mask:255.255.255.252 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:479 errors:0 dropped:0 overruns:0 frame:0 TX packets:182 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:48037 (46.9 KiB) TX bytes:33271 (32.4 KiB) --- root@beaglebone:~# ping -i 0.5 192.168.7.1 PING 192.168.7.1 (192.168.7.1) 56(84) bytes of data. 64 bytes from 192.168.7.1: icmp_req=1 ttl=128 time=0.719 ms 64 bytes from 192.168.7.1: icmp_req=2 ttl=128 time=0.670 ms 64 bytes from 192.168.7.1: icmp_req=3 ttl=128 time=0.577 ms 64 bytes from 192.168.7.1: icmp_req=4 ttl=128 time=0.745 ms ^C --- 192.168.7.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 1503ms rtt min/avg/max/mdev = 0.577/0.677/0.745/0.071 ms -- root@beaglebone:~# ping -i 0.5 192.168.7.2 PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data. 64 bytes from 192.168.7.2: icmp_req=1 ttl=64 time=0.235 ms 64 bytes from 192.168.7.2: icmp_req=2 ttl=64 time=0.125 ms 64 bytes from 192.168.7.2: icmp_req=3 ttl=64 time=0.157 ms 64 bytes from 192.168.7.2: icmp_req=4 ttl=64 time=0.117 ms ^C --- 192.168.7.2 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 1503ms rtt min/avg/max/mdev = 0.117/0.158/0.235/0.048 ms root@beaglebone:~# I can SSH into BBB & can ping to & fro with PC. But as shown on TOP, I can not ping to www.google.com Please help me Regards, Vinayak -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
[beagleboard] Re: Connecting beagle bone black to laptop LAN tthen to 3G USB data card
<https://lh6.googleusercontent.com/-tAuVtDYxDDY/UloufnX9RtI/AC0/Yyapv9U-CFE/s1600/BBB+internet+prblem.jpg> Posted for additional infor On Sunday, 13 October 2013 10:43:35 UTC+5:30, vinayak aghor wrote: > > Hello, > I have BBB, laptop with Vista & 3G datacard. I wan to connect beagle bone > black to laptop then I wan to access internet connetion of laptop to with > BBB. > Currently following is status > > --- > root@beaglebone:~# ping www.google.com > ping: unknown host www.google.com > > root@beaglebone:~# ifconfig > eth0 Link encap:Ethernet HWaddr 90:59:AF:57:42:18 > UP BROADCAST MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > Interrupt:56 > > loLink encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:65536 Metric:1 > RX packets:24 errors:0 dropped:0 overruns:0 frame:0 > TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:1768 (1.7 KiB) TX bytes:1768 (1.7 KiB) > > usb0 Link encap:Ethernet HWaddr 8A:56:DB:0A:72:13 > inet addr:192.168.7.2 Bcast:192.168.7.3 Mask:255.255.255.252 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:479 errors:0 dropped:0 overruns:0 frame:0 > TX packets:182 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:48037 (46.9 KiB) TX bytes:33271 (32.4 KiB) > > > --- > > root@beaglebone:~# ping -i 0.5 192.168.7.1 > PING 192.168.7.1 (192.168.7.1) 56(84) bytes of data. > 64 bytes from 192.168.7.1: icmp_req=1 ttl=128 time=0.719 ms > 64 bytes from 192.168.7.1: icmp_req=2 ttl=128 time=0.670 ms > 64 bytes from 192.168.7.1: icmp_req=3 ttl=128 time=0.577 ms > 64 bytes from 192.168.7.1: icmp_req=4 ttl=128 time=0.745 ms > ^C > --- 192.168.7.1 ping statistics --- > 4 packets transmitted, 4 received, 0% packet loss, time 1503ms > rtt min/avg/max/mdev = 0.577/0.677/0.745/0.071 ms > > -- > > root@beaglebone:~# ping -i 0.5 192.168.7.2 > PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data. > 64 bytes from 192.168.7.2: icmp_req=1 ttl=64 time=0.235 ms > 64 bytes from 192.168.7.2: icmp_req=2 ttl=64 time=0.125 ms > 64 bytes from 192.168.7.2: icmp_req=3 ttl=64 time=0.157 ms > 64 bytes from 192.168.7.2: icmp_req=4 ttl=64 time=0.117 ms > ^C > --- 192.168.7.2 ping statistics --- > 4 packets transmitted, 4 received, 0% packet loss, time 1503ms > rtt min/avg/max/mdev = 0.117/0.158/0.235/0.048 ms > root@beaglebone:~# > > I can SSH into BBB & can ping to & fro with PC. But as shown on TOP, I can > not ping to www.google.com > > Please help me > > Regards, > Vinayak > > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: [beagleboard] Connecting beagle bone black to laptop LAN tthen to 3G USB data card
Hello, I say share internet connection on 3G modem by following procedure properties --> sharing --> select the LAN connection .. then press ok Sharing is done. But , OS (Vista) assigns that LAN connection a IP : 192.168.0.1 & net mask as : 255.255.255.0 This is not in range of 192.168.7.2 of BBB. Because of this my connection between BBB & PC breaks. So I can not SSH into BBB. Regards, Vinayak On Sunday, 13 October 2013 11:29:32 UTC+5:30, Wulf Man wrote: > > enable internet connection sharing on your windows machine > > > On 10/12/2013 10:13 PM, vinayak aghor wrote: > > Hello, > > I have BBB, laptop with Vista & 3G datacard. I wan to connect beagle > > bone black to laptop then I wan to access internet connetion of laptop > > to with BBB. > > Currently following is status > > > --- > > > > root@beaglebone:~# ping www.google.com > > ping: unknown host www.google.com > > > > root@beaglebone:~# ifconfig > > eth0 Link encap:Ethernet HWaddr 90:59:AF:57:42:18 > > UP BROADCAST MULTICAST MTU:1500 Metric:1 > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > > collisions:0 txqueuelen:1000 > > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > > Interrupt:56 > > > > loLink encap:Local Loopback > > inet addr:127.0.0.1 Mask:255.0.0.0 > > inet6 addr: ::1/128 Scope:Host > > UP LOOPBACK RUNNING MTU:65536 Metric:1 > > RX packets:24 errors:0 dropped:0 overruns:0 frame:0 > > TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 > > collisions:0 txqueuelen:0 > > RX bytes:1768 (1.7 KiB) TX bytes:1768 (1.7 KiB) > > > > usb0 Link encap:Ethernet HWaddr 8A:56:DB:0A:72:13 > > inet addr:192.168.7.2 Bcast:192.168.7.3 Mask:255.255.255.252 > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > RX packets:479 errors:0 dropped:0 overruns:0 frame:0 > > TX packets:182 errors:0 dropped:0 overruns:0 carrier:0 > > collisions:0 txqueuelen:1000 > > RX bytes:48037 (46.9 KiB) TX bytes:33271 (32.4 KiB) > > > > > --- > > > > > > root@beaglebone:~# ping -i 0.5 192.168.7.1 > > PING 192.168.7.1 (192.168.7.1) 56(84) bytes of data. > > 64 bytes from 192.168.7.1: icmp_req=1 ttl=128 time=0.719 ms > > 64 bytes from 192.168.7.1: icmp_req=2 ttl=128 time=0.670 ms > > 64 bytes from 192.168.7.1: icmp_req=3 ttl=128 time=0.577 ms > > 64 bytes from 192.168.7.1: icmp_req=4 ttl=128 time=0.745 ms > > ^C > > --- 192.168.7.1 ping statistics --- > > 4 packets transmitted, 4 received, 0% packet loss, time 1503ms > > rtt min/avg/max/mdev = 0.577/0.677/0.745/0.071 ms > > > -- > > > > > > root@beaglebone:~# ping -i 0.5 192.168.7.2 > > PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data. > > 64 bytes from 192.168.7.2: icmp_req=1 ttl=64 time=0.235 ms > > 64 bytes from 192.168.7.2: icmp_req=2 ttl=64 time=0.125 ms > > 64 bytes from 192.168.7.2: icmp_req=3 ttl=64 time=0.157 ms > > 64 bytes from 192.168.7.2: icmp_req=4 ttl=64 time=0.117 ms > > ^C > > --- 192.168.7.2 ping statistics --- > > 4 packets transmitted, 4 received, 0% packet loss, time 1503ms > > rtt min/avg/max/mdev = 0.117/0.158/0.235/0.048 ms > > root@beaglebone:~# > > > > I can SSH into BBB & can ping to & fro with PC. But as shown on TOP, I > > can not ping to www.google.com > > > > Please help me > > > > Regards, > > Vinayak > > > > > > > > -- > > For more options, visit http://beagleboard.org/discuss > > --- > > You received this message because you are subscribed to the Google > > Groups "BeagleBoard" group. > > To unsubscribe from this group and stop receiving emails from it, send > > an email to beagleboard...@googlegroups.com . > > For more options, visit https://groups.google.com/groups/opt_out. > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: [beagleboard] Connecting beagle bone black to laptop LAN tthen to 3G USB data card
I did try following but I did nto get break through - /sbin/route add default gw 192.168.7.1 - echo "nameserver 8.8.8.8" >> /etc/resolv.conf Please help On Sunday, 13 October 2013 12:29:39 UTC+5:30, vinayak aghor wrote: > > > Hello, > I say share internet connection on 3G modem by following procedure > properties --> sharing --> select the LAN connection .. then press ok > > Sharing is done. > > But , OS (Vista) assigns that LAN connection a IP : 192.168.0.1 & net > mask as : 255.255.255.0 > > This is not in range of 192.168.7.2 of BBB. > > Because of this my connection between BBB & PC breaks. So I can not SSH > into BBB. > > Regards, > Vinayak > > > > > On Sunday, 13 October 2013 11:29:32 UTC+5:30, Wulf Man wrote: >> >> enable internet connection sharing on your windows machine >> >> >> On 10/12/2013 10:13 PM, vinayak aghor wrote: >> > Hello, >> > I have BBB, laptop with Vista & 3G datacard. I wan to connect beagle >> > bone black to laptop then I wan to access internet connetion of laptop >> > to with BBB. >> > Currently following is status >> > >> --- >> >> >> > root@beaglebone:~# ping www.google.com >> > ping: unknown host www.google.com >> > >> > root@beaglebone:~# ifconfig >> > eth0 Link encap:Ethernet HWaddr 90:59:AF:57:42:18 >> > UP BROADCAST MULTICAST MTU:1500 Metric:1 >> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >> > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >> > collisions:0 txqueuelen:1000 >> > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >> > Interrupt:56 >> > >> > loLink encap:Local Loopback >> > inet addr:127.0.0.1 Mask:255.0.0.0 >> > inet6 addr: ::1/128 Scope:Host >> > UP LOOPBACK RUNNING MTU:65536 Metric:1 >> > RX packets:24 errors:0 dropped:0 overruns:0 frame:0 >> > TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 >> > collisions:0 txqueuelen:0 >> > RX bytes:1768 (1.7 KiB) TX bytes:1768 (1.7 KiB) >> > >> > usb0 Link encap:Ethernet HWaddr 8A:56:DB:0A:72:13 >> > inet addr:192.168.7.2 Bcast:192.168.7.3 >> Mask:255.255.255.252 >> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >> > RX packets:479 errors:0 dropped:0 overruns:0 frame:0 >> > TX packets:182 errors:0 dropped:0 overruns:0 carrier:0 >> > collisions:0 txqueuelen:1000 >> > RX bytes:48037 (46.9 KiB) TX bytes:33271 (32.4 KiB) >> > >> > >> --- >> >> >> > >> > root@beaglebone:~# ping -i 0.5 192.168.7.1 >> > PING 192.168.7.1 (192.168.7.1) 56(84) bytes of data. >> > 64 bytes from 192.168.7.1: icmp_req=1 ttl=128 time=0.719 ms >> > 64 bytes from 192.168.7.1: icmp_req=2 ttl=128 time=0.670 ms >> > 64 bytes from 192.168.7.1: icmp_req=3 ttl=128 time=0.577 ms >> > 64 bytes from 192.168.7.1: icmp_req=4 ttl=128 time=0.745 ms >> > ^C >> > --- 192.168.7.1 ping statistics --- >> > 4 packets transmitted, 4 received, 0% packet loss, time 1503ms >> > rtt min/avg/max/mdev = 0.577/0.677/0.745/0.071 ms >> > >> -- >> >> >> > >> > root@beaglebone:~# ping -i 0.5 192.168.7.2 >> > PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data. >> > 64 bytes from 192.168.7.2: icmp_req=1 ttl=64 time=0.235 ms >> > 64 bytes from 192.168.7.2: icmp_req=2 ttl=64 time=0.125 ms >> > 64 bytes from 192.168.7.2: icmp_req=3 ttl=64 time=0.157 ms >> > 64 bytes from 192.168.7.2: icmp_req=4 ttl=64 time=0.117 ms >> > ^C >> > --- 192.168.7.2 ping statistics --- >> > 4 packets transmitted, 4 received, 0% packet loss, time 1503ms >> > rtt min/avg/max/mdev = 0.117/0.158/0.235/0.048 ms >> > root@beaglebone:~# >> > >> > I can SSH into BBB & can ping to & fro with PC. But as shown on TOP, I >> > can not ping to www.google.com >> > >> > Please help me >> > >> > Regards, >> > Vinayak >> > >> > >> > >> > -- >> > For more options, visit http://beagleboard.org/discuss >> > --- >> > You received this message because you are subscribed to the Google >> > Groups "BeagleBoard" group. >> > To unsubscribe from this group and stop receiving emails from it, send >> > an email to beagleboard...@googlegroups.com. >> > For more options, visit https://groups.google.com/groups/opt_out. >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
[beagleboard] How to install 3G internet dongle in BBB
Hello, I have BSNL 3G USB dongle. Can we connect this dongle to BBB (Angstrom) directly? If any one knows this please post it here.. Thanks Regards, Vinayak -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: [beagleboard] Connecting beagle bone black to laptop LAN tthen to 3G USB data card
Is there any one... who can help? On Sunday, 13 October 2013 13:51:27 UTC+5:30, vinayak aghor wrote: > > I did try following but I did nto get break through > > - /sbin/route add default gw 192.168.7.1 > - echo "nameserver 8.8.8.8" >> /etc/resolv.conf > > Please help > > > On Sunday, 13 October 2013 12:29:39 UTC+5:30, vinayak aghor wrote: >> >> >> Hello, >> I say share internet connection on 3G modem by following procedure >> properties --> sharing --> select the LAN connection .. then press ok >> >> Sharing is done. >> >> But , OS (Vista) assigns that LAN connection a IP : 192.168.0.1 & net >> mask as : 255.255.255.0 >> >> This is not in range of 192.168.7.2 of BBB. >> >> Because of this my connection between BBB & PC breaks. So I can not SSH >> into BBB. >> >> Regards, >> Vinayak >> >> >> >> >> On Sunday, 13 October 2013 11:29:32 UTC+5:30, Wulf Man wrote: >>> >>> enable internet connection sharing on your windows machine >>> >>> >>> On 10/12/2013 10:13 PM, vinayak aghor wrote: >>> > Hello, >>> > I have BBB, laptop with Vista & 3G datacard. I wan to connect beagle >>> > bone black to laptop then I wan to access internet connetion of laptop >>> > to with BBB. >>> > Currently following is status >>> > >>> --- >>> >>> >>> > root@beaglebone:~# ping www.google.com >>> > ping: unknown host www.google.com >>> > >>> > root@beaglebone:~# ifconfig >>> > eth0 Link encap:Ethernet HWaddr 90:59:AF:57:42:18 >>> > UP BROADCAST MULTICAST MTU:1500 Metric:1 >>> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 >>> > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >>> > collisions:0 txqueuelen:1000 >>> > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>> > Interrupt:56 >>> > >>> > loLink encap:Local Loopback >>> > inet addr:127.0.0.1 Mask:255.0.0.0 >>> > inet6 addr: ::1/128 Scope:Host >>> > UP LOOPBACK RUNNING MTU:65536 Metric:1 >>> > RX packets:24 errors:0 dropped:0 overruns:0 frame:0 >>> > TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 >>> > collisions:0 txqueuelen:0 >>> > RX bytes:1768 (1.7 KiB) TX bytes:1768 (1.7 KiB) >>> > >>> > usb0 Link encap:Ethernet HWaddr 8A:56:DB:0A:72:13 >>> > inet addr:192.168.7.2 Bcast:192.168.7.3 >>> Mask:255.255.255.252 >>> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >>> > RX packets:479 errors:0 dropped:0 overruns:0 frame:0 >>> > TX packets:182 errors:0 dropped:0 overruns:0 carrier:0 >>> > collisions:0 txqueuelen:1000 >>> > RX bytes:48037 (46.9 KiB) TX bytes:33271 (32.4 KiB) >>> > >>> > >>> --- >>> >>> >>> > >>> > root@beaglebone:~# ping -i 0.5 192.168.7.1 >>> > PING 192.168.7.1 (192.168.7.1) 56(84) bytes of data. >>> > 64 bytes from 192.168.7.1: icmp_req=1 ttl=128 time=0.719 ms >>> > 64 bytes from 192.168.7.1: icmp_req=2 ttl=128 time=0.670 ms >>> > 64 bytes from 192.168.7.1: icmp_req=3 ttl=128 time=0.577 ms >>> > 64 bytes from 192.168.7.1: icmp_req=4 ttl=128 time=0.745 ms >>> > ^C >>> > --- 192.168.7.1 ping statistics --- >>> > 4 packets transmitted, 4 received, 0% packet loss, time 1503ms >>> > rtt min/avg/max/mdev = 0.577/0.677/0.745/0.071 ms >>> > >>> -- >>> >>> >>> > >>> > root@beaglebone:~# ping -i 0.5 192.168.7.2 >>> > PING 192.168.7.2 (192.168.7.2) 56(84) bytes of data. >>> > 64 bytes from 192.168.7.2: icmp_req=1 ttl=64 time=0.235 ms >>> > 64 bytes from 192.168.7.2: icmp_req=2 ttl=64 time=0.125 ms >>> > 64 bytes from 192.168.7.2: icmp_req=3 ttl=64 time=0.157 ms >>> > 64 bytes from 192.168.7.2: icmp_req=4 ttl=64 t
[beagleboard] Procedure to install Ubuntu / Debian from scratch
Hello, I want to install ubuntu / Debian on BBB from scratch. This is same as if, installing everything from bootloader to OS on fresh manufactured board either on emmc or sd card. Kindly post procedure to install it. Regards, Vinayak -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
[beagleboard] Re: Procedure to install Ubuntu / Debian from scratch
Thanks George. I want to install bootloader and uboot in BBB & then manually install kernel and rootfs on TFTP. Can I do that? I found below link.. but don't know whether i can only install bootloader & uboot in BBB. Then separately install kernel and rootfs of ubuntu in it. http://eewiki.net/display/linuxonarm/BeagleBone+Black I am new to linux itself Regards Vinayak On Monday, 4 November 2013 11:33:02 UTC+5:30, George B wrote: > > Hi, see if this link helps: > > http://elinux.org/BeagleBoardUbuntu > > > > On Sunday, November 3, 2013 9:06:54 PM UTC-8, vinayak aghor wrote: >> >> Hello, >> I want to install ubuntu / Debian on BBB from scratch. This is same as >> if, installing everything from bootloader to OS on fresh manufactured board >> either on emmc or sd card. >> Kindly post procedure to install it. >> >> Regards, >> Vinayak >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
[beagleboard] Need support in compiling ubuntu for BBB
Hello, I want to compile OS ubuntu for BBB. I am referring http://eewiki.net/display/linuxonarm/BeagleBone+Black In downloaded linux-dev-am33x-v3.12 in home directory. Then ran script ./build_kernel.sh It initially downloaded cross-compiler toolchain (around 48MB) and did set the CC, which is expected. debug: CC=/home/vinayak/linux-dev-am33x-v3.12/dl/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/arm-linux-gnueabihf- Then it tried to download linux directory scripts/git: LINUX_GIT not defined in system.sh cloning git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git into default location: /home/vinayak/linux-dev-am33x-v3.12/ignore/linux-src Cloning into '/home/vinayak/linux-dev-am33x-v3.12/ignore/linux-src'... remote: Counting objects: 3239961, done. remote: Compressing objects: 100% (486062/486062), done. ^Cceiving objects: 0% (1535/3239961), 836.00 KiB | 50 KiB/s After downloading complete (around 650MB), got message as - Resolving deltas Now internet connection lost. Again ran script ./build_kernel.sh Now script again downloading 650MB data, which is not expected. In the previous run, it has downloaded the same data & again downloading. There should be some catch in this. How to permanently fix this? How to download LINUX_GIT permanently. so,again will not download same file Please help Regards Vinayak -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
[beagleboard] Install VLC in Angstrom on BBB
Hello, I want to install VLC on angstrom so that I can use data streaming on network. I tried to use command "opkg install vlc". I got response as unknown package. Is thare vlc package on in angstrom? Kindly post on above query. Regards, Vinayak -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
[beagleboard] Getting started information for ubuntu 13.04 on BBB (similar to Angstrom)
Hello All , I have downloaded *ubuntu-raring-13.04-armhf-3.8.13-bone20* from http://www.armhf.com/index.php/boards/beaglebone-black/ & installed on SD card. It started fine. Is there any documentation on how to SSH to PC through USB0 (same as angstrom), changing resolution of screen through command line? Because I have no LAN internet connection , so I could not install ubuntu-desktop. Is there option to use following commands (same as Angstrom). - /sbin/route add default gw 192.168.7.1 - echo "nameserver 8.8.8.8" >> /etc/resolv.conf By this way I can get connected to USB dongle through SSH into PC. Please help Regards Vinayak -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
[beagleboard] Multiple IP camera streaming in BBB
Hello All, I want to stream 4 camera inputs at once through BBB. I have ethernet switch which connects four 1MP camera and this ethernet switch connects to ethernet port of BBB. Please help me how to stream from all 4 cameras at once. So I can check video on HDMI port. Please help what points i need to consider while designing. Regards, Vinayak -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Multiple IP camera streaming in BBB
Hello All, I want to use IP camera Qorivva MPC5604EKIT. http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC5604EKIT&nodeId=01624606C1427E This freescale indivisual board comes with preloaded software & IP 192.168.1.2 I will use 4 such boards then I want to combine these videos to get combined view from all cameras. WebRTC gives option for video chatting. Does this help to create usecase? Regards, Vinayak On 12/19/14, Jesse Cobra wrote: > That's cool John... > They have some cool samples > http://googlechrome.github.io/webrtc/ > On Dec 18, 2014 10:47 PM, "John Syn" wrote: > >> >> From: Jesse Cobra >> Reply-To: "beagleboard@googlegroups.com" >> Date: Thursday, December 18, 2014 at 10:28 PM >> To: "beagleboard@googlegroups.com" >> Subject: Re: [beagleboard] Multiple IP camera streaming in BBB >> >> Sounds pretty simple, just use the Chromium browser on the BBB to look at >> the 4 ipcams? >> Assuming you are using ip cameras... >> >> Yeah, also look at: >> >> http://webrtc.org >> >> Regards, >> John >> >> >> On Thu, Dec 18, 2014 at 10:13 PM, Vinayak Aghor >> wrote: >>> >>> Hello All, >>> I want to stream 4 camera inputs at once through BBB. I have ethernet >>> switch which connects four 1MP camera and this ethernet switch connects >>> to >>> ethernet port of BBB. >>> Please help me how to stream from all 4 cameras at once. So I can check >>> video on HDMI port. Please help what points i need to consider while >>> designing. >>> >>> Regards, >>> Vinayak >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups >>> "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an >>> email to beagleboard+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/luLhnyCsbeI/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- Regards, Vinayak R. Aghor -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[beagleboard] Read current register values in BBB during OS running
hello All, I want to read current register values in downloaded OS (Angstrom) in BBB. for ex. register value set for DDR3 clk, write levelling register values ectc. Can we read while OS is running? Regards, Vinayak -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: [beagleboard] Connecting beagle bone black to laptop LAN tthen to 3G USB data card
Hi, I had connected dongle to pc. BBB to PC. Yes, for me it, it worked for 2 times. May be after resetting board, we need to do setting again. There is different procedure to make this permanent change. Pls check derek molly site. On 11 Mar 2014 20:33, wrote: Hello vinayak, you connected data card to your PC or beagle itself?? because i can access Internet on my PC but when i follow the procedure you mentioned it did not work!! i access internet on Ubuntu using WVDIAl package!! will appriciate any help. On Tuesday, November 5, 2013 1:53:17 AM UTC-5, Vinayak Aghor wrote: > > > Hi > I again tried with... -- For more options, visit http://beagleboard.org/discuss --- You received this message because yo... For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[beagleboard] Speed of ethernet port for getting stream from 4 (H.264) comptressed cameras?
Hello, I have 4 IP cameras wuth output in H.264 profile. I want to connect to ethernet switch. What should be speed of 5th port, which will be connected to any beagle bone? 100 mbps port will be sufficient? Also can processor at a time process 4 different threads to stitch video? please help Regards, Vinayak -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
