Re: [beagleboard] Debugging with CCs V6.2 / TI XDS100v2 USB failed becuase of Address 0x80000000

2016-09-26 Thread Ashkan Golestani 
John,
Thanks for quick reply .Using the BBB is too complicated than I expected . 
Thanks again for info . I'll post to this chain if I had more issue with 
those packages!

Regards 
Ash 

On Monday, September 26, 2016 at 12:33:51 PM UTC-7, john3909 wrote:

> If you are trying to do bare bone development, then Starterware has a 
> custom MLO, u-boot and GEL files necessary to configure DDR memory. Clearly 
> the BBB DDR hasn’t been configured and that is why you are getting this 
> error.
>
> Regards,
> John
>
>
>
>
> On Sep 26, 2016, at 12:04 PM, Ashkan Golestani  > wrote:
>
> Folks,
> I am new with BBB but I have enough experience with CCS and ARM and other 
> processors .
> I have created the project with C++ ,GNU Compiler and Linker also is 
> attached to my project . 
> Here is my problem :
>
> M3_wakeupSS: File Loader: Verification failed: Values at address 
> 0x8000 do not match Please verify target memory and memory map. (Note: 
> I can uncheck the fast verification, But that is not the right solution )
>
> M3_wakeupSS: GEL: File: ...\workspace_v6_2\RSM_1\Debug\RSM_1.out: a data 
> verification error occurred, file load failed.
>
> I don't see any option on project properties for BBB setting to select the 
> start debugging address. 
> By the way if it is not 0x8000  ! what is the number ?
>
> Thanks in advance 
> Ashkan Golestani
>
> -- 
> For more options, visit http://beagleboard.org/discuss
> --- 
> You received this message because you are subscribed to the Google Groups 
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to beagleboard...@googlegroups.com .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/beagleboard/31da8342-4de5-4f70-81a3-c38f9592695c%40googlegroups.com
>  
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>
>
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/676be37b-b9a6-4e6a-937d-93ca20cd1e1e%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] Debugging with CCs V6.2 / TI XDS100v2 USB failed becuase of Address 0x80000000

2016-09-26 Thread John Syne 
If you are trying to do bare bone development, then Starterware has a custom 
MLO, u-boot and GEL files necessary to configure DDR memory. Clearly the BBB 
DDR hasn’t been configured and that is why you are getting this error.

Regards,
John




> On Sep 26, 2016, at 12:04 PM, Ashkan Golestani  wrote:
> 
> Folks,
> I am new with BBB but I have enough experience with CCS and ARM and other 
> processors .
> I have created the project with C++ ,GNU Compiler and Linker also is attached 
> to my project .
> Here is my problem :
> M3_wakeupSS: File Loader: Verification failed: Values at address 0x8000 
> do not match Please verify target memory and memory map. (Note: I can uncheck 
> the fast verification, But that is not the right solution )
> 
> M3_wakeupSS: GEL: File: ...\workspace_v6_2\RSM_1\Debug\RSM_1.out: a data 
> verification error occurred, file load failed.
> 
> 
> I don't see any option on project properties for BBB setting to select the 
> start debugging address.
> By the way if it is not 0x8000  ! what is the number ?
> 
> Thanks in advance
> Ashkan Golestani
> 
> -- 
> For more options, visit http://beagleboard.org/discuss 
> 
> --- 
> You received this message because you are subscribed to the Google Groups 
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to beagleboard+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/beagleboard/31da8342-4de5-4f70-81a3-c38f9592695c%40googlegroups.com
>  
> .
> For more options, visit https://groups.google.com/d/optout 
> .

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/604694BF-DC2D-4689-8713-C8E40B294940%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] Debugging with CCs V6.2 / TI XDS100v2 USB failed becuase of Address 0x80000000

2016-09-26 Thread Ashkan Golestani 
Folks,
I am new with BBB but I have enough experience with CCS and ARM and other 
processors .
I have created the project with C++ ,GNU Compiler and Linker also is 
attached to my project . 
Here is my problem :

M3_wakeupSS: File Loader: Verification failed: Values at address 0x8000 
do not match Please verify target memory and memory map. (Note: I can 
uncheck the fast verification, But that is not the right solution )

M3_wakeupSS: GEL: File: ...\workspace_v6_2\RSM_1\Debug\RSM_1.out: a data 
verification error occurred, file load failed.

I don't see any option on project properties for BBB setting to select the 
start debugging address. 
By the way if it is not 0x8000  ! what is the number ?

Thanks in advance 
Ashkan Golestani

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/31da8342-4de5-4f70-81a3-c38f9592695c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.