Re: [beagleboard] Physical Dimensions
AM43xx is not compatible with the AM335x. So if anything were done, it would not be a BeagleBone. At this point, I have no plans to do anything with that devcie. Gerald On Wed, Feb 25, 2015 at 1:24 AM, Giuseppe Iellamo pepp...@gmail.com wrote: I know it's maybe too early, but aside the new (and very intresting x15) is there any plan for a new BeagleBone (am43xx based for example) ? Il giorno lunedì 23 febbraio 2015 13:33:07 UTC+1, Gerald ha scritto: Trying to keep it as small as possible, but it takes space for al the stuff on the board. Gerald On Sat, Feb 21, 2015 at 12:39 PM, Petr Krenzelok petr.kr...@gmail.com wrote: OK, thanks for the clarification. I was just curious, if you are again splitting it between the xM kind of board and BBB form factor, e.g. one being a media oriented board, whereas other specialised for the automatition, etc. Anyway - looking forward to the x15 board! Petr Dne pátek 20. února 2015 18:28:50 UTC+1 Gerald napsal(a): Well, components take up space. More space is needed for those parts. Bigger processors 4x memory chips.More expansion pins, two RJ45, three USB3 connectors, eSATA, two audio jacks. Trust me, there is no open space.. Gerald On Fri, Feb 20, 2015 at 8:08 AM, Petr Krenzelok petr.kr...@gmail.com wrote: Why so big? :-) It is even bigger than xM version. Will there be any new version of BBB format in future, or x15 is the new direction? Thanks, Petr Dne úterý 2. prosince 2014 19:53:37 UTC+1 Gerald napsal(a): It is larger than the NUC, About 4.2 x 4. I will try and get a picture when I can. Gerald On Tue, Dec 2, 2014 at 10:52 AM, Justin Triplett justin@gmail.com wrote: Hello A few people at my hackerspace are pretty excited for X15. Could we see bottom pics of the current board? I think I see where the expansion headers are, but more pics would be appreciated. Sounds like it is pretty close to NUC size but not quite, it would be really awesome if you could pull that off. Either way I'm ready to fire up the laser cutter to make case as soon as we get all the physical dimensions. :) Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Physical Dimensions
Ok! Thanks for the reply! Il giorno mercoledì 25 febbraio 2015 13:35:55 UTC+1, Gerald ha scritto: AM43xx is not compatible with the AM335x. So if anything were done, it would not be a BeagleBone. At this point, I have no plans to do anything with that devcie. Gerald On Wed, Feb 25, 2015 at 1:24 AM, Giuseppe Iellamo pep...@gmail.com javascript: wrote: I know it's maybe too early, but aside the new (and very intresting x15) is there any plan for a new BeagleBone (am43xx based for example) ? Il giorno lunedì 23 febbraio 2015 13:33:07 UTC+1, Gerald ha scritto: Trying to keep it as small as possible, but it takes space for al the stuff on the board. Gerald On Sat, Feb 21, 2015 at 12:39 PM, Petr Krenzelok petr.kr...@gmail.com wrote: OK, thanks for the clarification. I was just curious, if you are again splitting it between the xM kind of board and BBB form factor, e.g. one being a media oriented board, whereas other specialised for the automatition, etc. Anyway - looking forward to the x15 board! Petr Dne pátek 20. února 2015 18:28:50 UTC+1 Gerald napsal(a): Well, components take up space. More space is needed for those parts. Bigger processors 4x memory chips.More expansion pins, two RJ45, three USB3 connectors, eSATA, two audio jacks. Trust me, there is no open space.. Gerald On Fri, Feb 20, 2015 at 8:08 AM, Petr Krenzelok petr.kr...@gmail.com wrote: Why so big? :-) It is even bigger than xM version. Will there be any new version of BBB format in future, or x15 is the new direction? Thanks, Petr Dne úterý 2. prosince 2014 19:53:37 UTC+1 Gerald napsal(a): It is larger than the NUC, About 4.2 x 4. I will try and get a picture when I can. Gerald On Tue, Dec 2, 2014 at 10:52 AM, Justin Triplett justin@gmail.com wrote: Hello A few people at my hackerspace are pretty excited for X15. Could we see bottom pics of the current board? I think I see where the expansion headers are, but more pics would be appreciated. Sounds like it is pretty close to NUC size but not quite, it would be really awesome if you could pull that off. Either way I'm ready to fire up the laser cutter to make case as soon as we get all the physical dimensions. :) Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com javascript:. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org javascript: http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Physical Dimensions
I know it's maybe too early, but aside the new (and very intresting x15) is there any plan for a new BeagleBone (am43xx based for example) ? Il giorno lunedì 23 febbraio 2015 13:33:07 UTC+1, Gerald ha scritto: Trying to keep it as small as possible, but it takes space for al the stuff on the board. Gerald On Sat, Feb 21, 2015 at 12:39 PM, Petr Krenzelok petr.kr...@gmail.com javascript: wrote: OK, thanks for the clarification. I was just curious, if you are again splitting it between the xM kind of board and BBB form factor, e.g. one being a media oriented board, whereas other specialised for the automatition, etc. Anyway - looking forward to the x15 board! Petr Dne pátek 20. února 2015 18:28:50 UTC+1 Gerald napsal(a): Well, components take up space. More space is needed for those parts. Bigger processors 4x memory chips.More expansion pins, two RJ45, three USB3 connectors, eSATA, two audio jacks. Trust me, there is no open space.. Gerald On Fri, Feb 20, 2015 at 8:08 AM, Petr Krenzelok petr.kr...@gmail.com wrote: Why so big? :-) It is even bigger than xM version. Will there be any new version of BBB format in future, or x15 is the new direction? Thanks, Petr Dne úterý 2. prosince 2014 19:53:37 UTC+1 Gerald napsal(a): It is larger than the NUC, About 4.2 x 4. I will try and get a picture when I can. Gerald On Tue, Dec 2, 2014 at 10:52 AM, Justin Triplett justin@gmail.com wrote: Hello A few people at my hackerspace are pretty excited for X15. Could we see bottom pics of the current board? I think I see where the expansion headers are, but more pics would be appreciated. Sounds like it is pretty close to NUC size but not quite, it would be really awesome if you could pull that off. Either way I'm ready to fire up the laser cutter to make case as soon as we get all the physical dimensions. :) Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com javascript:. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org javascript: http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Physical Dimensions
Trying to keep it as small as possible, but it takes space for al the stuff on the board. Gerald On Sat, Feb 21, 2015 at 12:39 PM, Petr Krenzelok petr.krenze...@gmail.com wrote: OK, thanks for the clarification. I was just curious, if you are again splitting it between the xM kind of board and BBB form factor, e.g. one being a media oriented board, whereas other specialised for the automatition, etc. Anyway - looking forward to the x15 board! Petr Dne pátek 20. února 2015 18:28:50 UTC+1 Gerald napsal(a): Well, components take up space. More space is needed for those parts. Bigger processors 4x memory chips.More expansion pins, two RJ45, three USB3 connectors, eSATA, two audio jacks. Trust me, there is no open space.. Gerald On Fri, Feb 20, 2015 at 8:08 AM, Petr Krenzelok petr.kr...@gmail.com wrote: Why so big? :-) It is even bigger than xM version. Will there be any new version of BBB format in future, or x15 is the new direction? Thanks, Petr Dne úterý 2. prosince 2014 19:53:37 UTC+1 Gerald napsal(a): It is larger than the NUC, About 4.2 x 4. I will try and get a picture when I can. Gerald On Tue, Dec 2, 2014 at 10:52 AM, Justin Triplett justin@gmail.com wrote: Hello A few people at my hackerspace are pretty excited for X15. Could we see bottom pics of the current board? I think I see where the expansion headers are, but more pics would be appreciated. Sounds like it is pretty close to NUC size but not quite, it would be really awesome if you could pull that off. Either way I'm ready to fire up the laser cutter to make case as soon as we get all the physical dimensions. :) Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Physical Dimensions
OK, thanks for the clarification. I was just curious, if you are again splitting it between the xM kind of board and BBB form factor, e.g. one being a media oriented board, whereas other specialised for the automatition, etc. Anyway - looking forward to the x15 board! Petr Dne pátek 20. února 2015 18:28:50 UTC+1 Gerald napsal(a): Well, components take up space. More space is needed for those parts. Bigger processors 4x memory chips.More expansion pins, two RJ45, three USB3 connectors, eSATA, two audio jacks. Trust me, there is no open space.. Gerald On Fri, Feb 20, 2015 at 8:08 AM, Petr Krenzelok petr.kr...@gmail.com javascript: wrote: Why so big? :-) It is even bigger than xM version. Will there be any new version of BBB format in future, or x15 is the new direction? Thanks, Petr Dne úterý 2. prosince 2014 19:53:37 UTC+1 Gerald napsal(a): It is larger than the NUC, About 4.2 x 4. I will try and get a picture when I can. Gerald On Tue, Dec 2, 2014 at 10:52 AM, Justin Triplett justin@gmail.com wrote: Hello A few people at my hackerspace are pretty excited for X15. Could we see bottom pics of the current board? I think I see where the expansion headers are, but more pics would be appreciated. Sounds like it is pretty close to NUC size but not quite, it would be really awesome if you could pull that off. Either way I'm ready to fire up the laser cutter to make case as soon as we get all the physical dimensions. :) Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com javascript:. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org javascript: http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Physical Dimensions
Why so big? :-) It is even bigger than xM version. Will there be any new version of BBB format in future, or x15 is the new direction? Thanks, Petr Dne úterý 2. prosince 2014 19:53:37 UTC+1 Gerald napsal(a): It is larger than the NUC, About 4.2 x 4. I will try and get a picture when I can. Gerald On Tue, Dec 2, 2014 at 10:52 AM, Justin Triplett justin@gmail.com javascript: wrote: Hello A few people at my hackerspace are pretty excited for X15. Could we see bottom pics of the current board? I think I see where the expansion headers are, but more pics would be appreciated. Sounds like it is pretty close to NUC size but not quite, it would be really awesome if you could pull that off. Either way I'm ready to fire up the laser cutter to make case as soon as we get all the physical dimensions. :) Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com javascript:. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org javascript: http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Physical Dimensions
Well, components take up space. More space is needed for those parts. Bigger processors 4x memory chips.More expansion pins, two RJ45, three USB3 connectors, eSATA, two audio jacks. Trust me, there is no open space.. Gerald On Fri, Feb 20, 2015 at 8:08 AM, Petr Krenzelok petr.krenze...@gmail.com wrote: Why so big? :-) It is even bigger than xM version. Will there be any new version of BBB format in future, or x15 is the new direction? Thanks, Petr Dne úterý 2. prosince 2014 19:53:37 UTC+1 Gerald napsal(a): It is larger than the NUC, About 4.2 x 4. I will try and get a picture when I can. Gerald On Tue, Dec 2, 2014 at 10:52 AM, Justin Triplett justin@gmail.com wrote: Hello A few people at my hackerspace are pretty excited for X15. Could we see bottom pics of the current board? I think I see where the expansion headers are, but more pics would be appreciated. Sounds like it is pretty close to NUC size but not quite, it would be really awesome if you could pull that off. Either way I'm ready to fire up the laser cutter to make case as soon as we get all the physical dimensions. :) Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Physical Dimensions
The expansion headers are not going to change. The board has not been released, so there should be nothing out there already compatible. Gerald On Thu, Jan 29, 2015 at 9:16 PM, Justin Triplett justin.tripl...@gmail.com wrote: Thanks for the info! Does that mean there are accessories that are already compatible or are the expansion headers going to change? On Tuesday, January 27, 2015 at 3:37:34 PM UTC-5, Gerald wrote: Yep, that is the Beta version. another one to come. The X15 has no LCD board. That is for the AM5728 EVM for TI. I have yet to create an LCD board for the X15. Gerald On Mon, Jan 26, 2015 at 10:07 PM, Justin Triplett justin@gmail.com wrote: Additional Pictures! #0 Top, Ethernet facing #1 Bottom #2 Top, attached to LCD expansion board https://imgur.com/a/Gepxc#0 On Tuesday, December 2, 2014 at 1:53:37 PM UTC-5, Gerald wrote: It is larger than the NUC, About 4.2 x 4. I will try and get a picture when I can. Gerald On Tue, Dec 2, 2014 at 10:52 AM, Justin Triplett justin@gmail.com wrote: Hello A few people at my hackerspace are pretty excited for X15. Could we see bottom pics of the current board? I think I see where the expansion headers are, but more pics would be appreciated. Sounds like it is pretty close to NUC size but not quite, it would be really awesome if you could pull that off. Either way I'm ready to fire up the laser cutter to make case as soon as we get all the physical dimensions. :) Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Physical Dimensions
Thanks for the info! Does that mean there are accessories that are already compatible or are the expansion headers going to change? On Tuesday, January 27, 2015 at 3:37:34 PM UTC-5, Gerald wrote: Yep, that is the Beta version. another one to come. The X15 has no LCD board. That is for the AM5728 EVM for TI. I have yet to create an LCD board for the X15. Gerald On Mon, Jan 26, 2015 at 10:07 PM, Justin Triplett justin@gmail.com javascript: wrote: Additional Pictures! #0 Top, Ethernet facing #1 Bottom #2 Top, attached to LCD expansion board https://imgur.com/a/Gepxc#0 On Tuesday, December 2, 2014 at 1:53:37 PM UTC-5, Gerald wrote: It is larger than the NUC, About 4.2 x 4. I will try and get a picture when I can. Gerald On Tue, Dec 2, 2014 at 10:52 AM, Justin Triplett justin@gmail.com wrote: Hello A few people at my hackerspace are pretty excited for X15. Could we see bottom pics of the current board? I think I see where the expansion headers are, but more pics would be appreciated. Sounds like it is pretty close to NUC size but not quite, it would be really awesome if you could pull that off. Either way I'm ready to fire up the laser cutter to make case as soon as we get all the physical dimensions. :) Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com javascript:. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org javascript: http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Physical Dimensions
Thanks for sharing the pics. There's always room for some wrap wire in beta versions it seems :P Great work on the BeagleBoard X15, and looking forward to its release :) Abhishek On Wednesday, January 28, 2015 at 2:07:34 AM UTC+5:30, Gerald wrote: Yep, that is the Beta version. another one to come. The X15 has no LCD board. That is for the AM5728 EVM for TI. I have yet to create an LCD board for the X15. Gerald On Mon, Jan 26, 2015 at 10:07 PM, Justin Triplett justin@gmail.com javascript: wrote: Additional Pictures! #0 Top, Ethernet facing #1 Bottom #2 Top, attached to LCD expansion board https://imgur.com/a/Gepxc#0 On Tuesday, December 2, 2014 at 1:53:37 PM UTC-5, Gerald wrote: It is larger than the NUC, About 4.2 x 4. I will try and get a picture when I can. Gerald On Tue, Dec 2, 2014 at 10:52 AM, Justin Triplett justin@gmail.com wrote: Hello A few people at my hackerspace are pretty excited for X15. Could we see bottom pics of the current board? I think I see where the expansion headers are, but more pics would be appreciated. Sounds like it is pretty close to NUC size but not quite, it would be really awesome if you could pull that off. Either way I'm ready to fire up the laser cutter to make case as soon as we get all the physical dimensions. :) Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com javascript:. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org javascript: http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Physical Dimensions
Yep, that is the Beta version. another one to come. The X15 has no LCD board. That is for the AM5728 EVM for TI. I have yet to create an LCD board for the X15. Gerald On Mon, Jan 26, 2015 at 10:07 PM, Justin Triplett justin.tripl...@gmail.com wrote: Additional Pictures! #0 Top, Ethernet facing #1 Bottom #2 Top, attached to LCD expansion board https://imgur.com/a/Gepxc#0 On Tuesday, December 2, 2014 at 1:53:37 PM UTC-5, Gerald wrote: It is larger than the NUC, About 4.2 x 4. I will try and get a picture when I can. Gerald On Tue, Dec 2, 2014 at 10:52 AM, Justin Triplett justin@gmail.com wrote: Hello A few people at my hackerspace are pretty excited for X15. Could we see bottom pics of the current board? I think I see where the expansion headers are, but more pics would be appreciated. Sounds like it is pretty close to NUC size but not quite, it would be really awesome if you could pull that off. Either way I'm ready to fire up the laser cutter to make case as soon as we get all the physical dimensions. :) Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Physical Dimensions
Additional Pictures! #0 Top, Ethernet facing #1 Bottom #2 Top, attached to LCD expansion board https://imgur.com/a/Gepxc#0 On Tuesday, December 2, 2014 at 1:53:37 PM UTC-5, Gerald wrote: It is larger than the NUC, About 4.2 x 4. I will try and get a picture when I can. Gerald On Tue, Dec 2, 2014 at 10:52 AM, Justin Triplett justin@gmail.com javascript: wrote: Hello A few people at my hackerspace are pretty excited for X15. Could we see bottom pics of the current board? I think I see where the expansion headers are, but more pics would be appreciated. Sounds like it is pretty close to NUC size but not quite, it would be really awesome if you could pull that off. Either way I'm ready to fire up the laser cutter to make case as soon as we get all the physical dimensions. :) Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard...@googlegroups.com javascript:. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org javascript: http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[beagleboard] Physical Dimensions
Hello A few people at my hackerspace are pretty excited for X15. Could we see bottom pics of the current board? I think I see where the expansion headers are, but more pics would be appreciated. Sounds like it is pretty close to NUC size but not quite, it would be really awesome if you could pull that off. Either way I'm ready to fire up the laser cutter to make case as soon as we get all the physical dimensions. :) Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [beagleboard] Physical Dimensions
It is larger than the NUC, About 4.2 x 4. I will try and get a picture when I can. Gerald On Tue, Dec 2, 2014 at 10:52 AM, Justin Triplett justin.tripl...@gmail.com wrote: Hello A few people at my hackerspace are pretty excited for X15. Could we see bottom pics of the current board? I think I see where the expansion headers are, but more pics would be appreciated. Sounds like it is pretty close to NUC size but not quite, it would be really awesome if you could pull that off. Either way I'm ready to fire up the laser cutter to make case as soon as we get all the physical dimensions. :) Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Gerald ger...@beagleboard.org http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups BeagleBoard group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.