Re: [beagleboard] flashing lights and failed installation on BBGW

2017-01-27 Thread woody.lois via BeagleBoard 


On Sat, 1/28/17, Rohit Ram  wrote:

 Subject: Re: [beagleboard] flashing lights and failed installation on BBGW
 To: "BeagleBoard" 
 Cc: stephanechare...@gmail.com
 Date: Saturday, January 28, 2017, 3:40 AM
 
 Hi,
 Is there a way to stop wifidog from controlling those
 usr-leds. I've been trying to control them through
 bonescript, but they keep reverting to the wifidog scanning
 pattern.
 Regards,
 Rohit
 On Thursday, August 11, 2016 at 1:18:27 PM UTC+10,
 RobertCNelson wrote:On Wed, Aug 10, 2016 at 10:02 PM,
 Stephane Charette
 
  wrote:
 
 > Trying to install BBGW-blank-debian-8.5-seeed-
 iot-armhf-2016-08-07-4gb.img
 
 > onto a new BBGW.  Had problems, so I went out and
 bought a new micro SD card
 
 > and a new card reader just in case.
 
 >
 
 > When I hold the boot button down as I plug in power, I
 get one of two
 
 > scenarios happening:
 
 >
 
 > User LEDs #0 and 2 turn on, then lights 1 and 3 turn
 on, and back to #0 and
 
 > 2, then 1 and 3.  I've left it like that for over
 an hour thinking maybe
 
 > that was a new pattern.
 
 
 
 That's wifidog, scanning for wifi adapers...
 
 
 
 > All 4 LEDs turn on, then off, then on again, at the
 same rate as the normal
 
 > "heartbeat".  So blink twice, then 1/2
 second pause, and blink twice again.
 
 
 
 "flashing" failed...
 
 
 
 > User LED #0 (heartbeat) blinks maybe 3 or 4 times, then
 nothing else.  No
 
 > other activity.
 
 >
 
 >
 
 > Is there a page where the blink patterns are explained?
  If not, does
 
 > someone know where in the code to look so I can find
 the different blink
 
 > patterns and their explanation?
 
 
 
 Do you have a usb serial adapter?
 
 
 
 For "flashing" you are looking for the cylon
 pattern..
 
 
 
 Regards,
 
 
 
 -- 
 
 Robert Nelson
 
 https://rcn-ee.com/
 
 
 
 
 
 -- 
 
 For more options, visit http://beagleboard.org/discuss
 
 --- 
 
 You received this message because you are subscribed to the
 Google Groups "BeagleBoard" group.
 
 To unsubscribe from this group and stop receiving emails
 from it, send an email to beagleboard+unsubscr...@googlegroups.com.
 
 To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/7c4419fd-fd50-4f9b-bdf4-ef2a6a40b272%40googlegroups.com.
 
 For more options, visit https://groups.google.com/d/optout.
 La sfarsitul veacului al XIX-lea si inceputul celui urmator cele patru 
sectoare ale oricarei vieti nomice moderne aveau urmatoarea ordine circulatie  
industrie  comert agricultura Era ordinea jului de tehnicitate Cu alte cuvinte  
in agricultura omul ramanea prevalent si tehnica era atunci  a in comert 
traditia juca un rol mai mare decat tehnica  in industrie cele doua elemente se 
mau  in circulatie insa era maximum de tehnica si minimum de traditie Nu 
intamplator deci spre ulatie se indreptau manie investitii  totul si dm 
credinta ca tehnica era temelia progresului si aceul relelor universale Romania 
 intrata in modernitate  urma regulile acesteia   '

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/973056523.2473383.1485589950432%40mail.yahoo.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] flashing lights and failed installation on BBGW

2017-01-27 Thread Rohit Ram 
Hi,
Is there a way to stop wifidog from controlling those usr-leds. I've been 
trying to control them through bonescript, but they keep reverting to the 
wifidog scanning pattern.

Regards,
Rohit

On Thursday, August 11, 2016 at 1:18:27 PM UTC+10, RobertCNelson wrote:
>
> On Wed, Aug 10, 2016 at 10:02 PM, Stephane Charette 
> > wrote: 
> > Trying to install 
> BBGW-blank-debian-8.5-seeed-iot-armhf-2016-08-07-4gb.img 
> > onto a new BBGW.  Had problems, so I went out and bought a new micro SD 
> card 
> > and a new card reader just in case. 
> > 
> > When I hold the boot button down as I plug in power, I get one of two 
> > scenarios happening: 
> > 
> > User LEDs #0 and 2 turn on, then lights 1 and 3 turn on, and back to #0 
> and 
> > 2, then 1 and 3.  I've left it like that for over an hour thinking maybe 
> > that was a new pattern. 
>
> That's wifidog, scanning for wifi adapers... 
>
> > All 4 LEDs turn on, then off, then on again, at the same rate as the 
> normal 
> > "heartbeat".  So blink twice, then 1/2 second pause, and blink twice 
> again. 
>
> "flashing" failed... 
>
> > User LED #0 (heartbeat) blinks maybe 3 or 4 times, then nothing else. 
>  No 
> > other activity. 
> > 
> > 
> > Is there a page where the blink patterns are explained?  If not, does 
> > someone know where in the code to look so I can find the different blink 
> > patterns and their explanation? 
>
> Do you have a usb serial adapter? 
>
> For "flashing" you are looking for the cylon pattern.. 
>
> Regards, 
>
> -- 
> Robert Nelson 
> https://rcn-ee.com/ 
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/7c4419fd-fd50-4f9b-bdf4-ef2a6a40b272%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] flashing lights and failed installation on BBGW

2016-08-10 Thread Stephane Charette 
On Wednesday, August 10, 2016 at 8:09:08 PM UTC-7, Wulf Man wrote:
>
> what power supply are you using?
>


The USB micro (the only power option on a BBGW) plugged into a Certified 
Data 4-port powered USB hub: 
 
http://www.londondrugs.com/certified-data-usb-3.0-4-port-hub---hy-hb-8517/L8469843.html

I've successfully installed and configured about 20 BBB and BBG devices 
using this USB hub for power.  But this is my first (and only) BBGW.

Stéphane

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/7ca7a0ec-ec4f-4b4f-9026-c698c7a1e885%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] flashing lights and failed installation on BBGW

2016-08-10 Thread Robert Nelson 
On Wed, Aug 10, 2016 at 10:02 PM, Stephane Charette
 wrote:
> Trying to install BBGW-blank-debian-8.5-seeed-iot-armhf-2016-08-07-4gb.img
> onto a new BBGW.  Had problems, so I went out and bought a new micro SD card
> and a new card reader just in case.
>
> When I hold the boot button down as I plug in power, I get one of two
> scenarios happening:
>
> User LEDs #0 and 2 turn on, then lights 1 and 3 turn on, and back to #0 and
> 2, then 1 and 3.  I've left it like that for over an hour thinking maybe
> that was a new pattern.

That's wifidog, scanning for wifi adapers...

> All 4 LEDs turn on, then off, then on again, at the same rate as the normal
> "heartbeat".  So blink twice, then 1/2 second pause, and blink twice again.

"flashing" failed...

> User LED #0 (heartbeat) blinks maybe 3 or 4 times, then nothing else.  No
> other activity.
>
>
> Is there a page where the blink patterns are explained?  If not, does
> someone know where in the code to look so I can find the different blink
> patterns and their explanation?

Do you have a usb serial adapter?

For "flashing" you are looking for the cylon pattern..

Regards,

-- 
Robert Nelson
https://rcn-ee.com/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAOCHtYjQVAUmsQ2OvFeBy36S0cj605yx2j2JR8OkbeU-Mk_n2A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] flashing lights and failed installation on BBGW

2016-08-10 Thread evilwulfie 
what power supply are you using?




On 8/10/2016 8:02 PM, Stephane Charette wrote:
> Trying to
> install BBGW-blank-debian-8.5-seeed-iot-armhf-2016-08-07-4gb.img onto
> a new BBGW.  Had problems, so I went out and bought a new micro SD
> card and a new card reader just in case.
>
> When I hold the boot button down as I plug in power, I get one of two
> scenarios happening:
>
>   * User LEDs #0 and 2 turn on, then lights 1 and 3 turn on, and back
> to #0 and 2, then 1 and 3.  I've left it like that for over an
> hour thinking maybe that was a new pattern.
>   * All 4 LEDs turn on, then off, then on again, at the same rate as
> the normal "heartbeat".  So blink twice, then 1/2 second pause,
> and blink twice again.
>   * User LED #0 (heartbeat) blinks maybe 3 or 4 times, then nothing
> else.  No other activity.
>
>
> Is there a page where the blink patterns are explained?  If not, does
> someone know where in the code to look so I can find the different
> blink patterns and their explanation?
>
> Stéphane
>
> -- 
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google
> Groups "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to beagleboard+unsubscr...@googlegroups.com
> .
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/beagleboard/577055f6-c7f5-4e07-9c5f-c610f14822b3%40googlegroups.com
> .
> For more options, visit https://groups.google.com/d/optout.


-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/f54219e6-9584-36b4-5b02-e410d51cd346%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] flashing lights and failed installation on BBGW

2016-08-10 Thread Stephane Charette 
Trying to install BBGW-blank-debian-8.5-seeed-iot-armhf-2016-08-07-4gb.img 
onto a new BBGW.  Had problems, so I went out and bought a new micro SD 
card and a new card reader just in case.

When I hold the boot button down as I plug in power, I get one of two 
scenarios happening:


   - User LEDs #0 and 2 turn on, then lights 1 and 3 turn on, and back to 
   #0 and 2, then 1 and 3.  I've left it like that for over an hour thinking 
   maybe that was a new pattern.
   - All 4 LEDs turn on, then off, then on again, at the same rate as the 
   normal "heartbeat".  So blink twice, then 1/2 second pause, and blink twice 
   again.
   - User LED #0 (heartbeat) blinks maybe 3 or 4 times, then nothing else. 
No other activity.


Is there a page where the blink patterns are explained?  If not, does 
someone know where in the code to look so I can find the different blink 
patterns and their explanation?

Stéphane

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/577055f6-c7f5-4e07-9c5f-c610f14822b3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.