[BlueOnyx:22885] Re: Dfix2 & APF

[Michael Stauber]

Hi Greg,

> Michael actually agrees with you, which is why he built BFD as an
> alternative to dfix. By all means, try it instead.

Correction: That should be "Fail2ban", not "Bfd".

I find that Fail2ban works a lot more gracefully and especially for
email related attacks it has a great detection rate.

-- 
With best regards

Michael Stauber
___
Blueonyx mailing list
Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx

[BlueOnyx:22884] Re: Dfix2 & APF

[Greg Kuhnert]

Michael actually agrees with you, which is why he built BFD as an alternative 
to dfix. By all means, try it instead. As for whitelisting and dfix, I cannot 
explain why APF would delete whitelist entries.

For tuning dfix, you can update the rules manually. They are in /etc/sec - If 
there is a particular rule that you don’t like, comment it out.

GK

> On May 6, 2019, at 6:35 AM, Meaulnes Legler @ MailList  
> wrote:
> 
> hello
> 
> Dfix2 is too strict, the external IP of users get blocked in APF after just a 
> few false login attempts or because they connected some device with old 
> credentials...
> 
> Also — I don't know if it's Dfix2 who does it — an IP entered in APF 
> Firewall's Whitelist gets deleted after a while...
> 
> I forgot: how and where can I fine tune Dfix2 ? 
> 
> Thank you and best regards
> 
> _⌢_
> '¿')
> `-´Meaulnes Legler
>  Zurich, Switzerland
> 
> +41¦0 44 260 16 60
> 
> 
> 
> ___
> Blueonyx mailing list
> Blueonyx@mail.blueonyx.it
> http://mail.blueonyx.it/mailman/listinfo/blueonyx

___
Blueonyx mailing list
Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx

[BlueOnyx:22883] Dfix2 & APF

[Meaulnes Legler @ MailList]

hello

Dfix2 is too strict, the external IP of users get blocked in APF after just a 
few false login attempts or because they connected some device with old 
credentials...

Also — I don't know if it's Dfix2 who does it — an IP entered in APF Firewall's 
Whitelist gets deleted after a while...

I forgot: how and where can I fine tune Dfix2 ?

Thank you and best regards

_⌢_
'¿')
`-´  Meaulnes Legler

 Zurich, Switzerland

+41¦0 44 260 16 60


___
Blueonyx mailing list
Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx

[BlueOnyx:22882] Re: Cannot accèss Newlinq to install packages!

[Colin Jack]

Hmmm ... seems to be APF.
If I disable APF all works fine. (
I have tried clearing the APF blacklist but no improvement.

Colin

-Original Message-
From: Blueonyx  on behalf of Colin Jack 

Reply-To: BlueOnyx General Mailing List 
Date: Sunday, 5 May 2019 at 21:06
To: BlueOnyx General Mailing List 
Subject: [BlueOnyx:22881] Re: Cannot accèss Newlinq to install packages!

Hi Greg,

This is still not working right – came back for a while but now:

lynx: Can't access startfile http://newlinq.compassnetworks.com.au/

Can resolve URL okay from CLI:

[root@neptune admserv]# dig newlinq.compassnetworks.com.au

;; ANSWER SECTION:
newlinq.compassnetworks.com.au. 1454 IN A   203.26.211.2

Any thoughts.

Thanks

Colin

From: Blueonyx  on behalf of Greg 
Kuhnert 
Reply-To: BlueOnyx General Mailing List 
Date: Monday, 29 April 2019 at 23:29
To: BlueOnyx General Mailing List 
Subject: [BlueOnyx:22863] Re: Cannot accèss Newlinq to install packages!

Hi Colin. 

Check it with your browser http://newlinq.compassnetworks.com.au - you will 
see a message on screen. You can also use lynx to check it from your server. It 
will respond with a 500 response code, but you will still see the same message.

If it works on your PC but not your server, give me your IP address and 
I’ll investigate.

GK


On Apr 30, 2019, at 1:01 AM, Colin Jack  wrote:

I have fired up a new 5209R VPS to migrate an ailing 5208R but I need to 
install some pkgs.
Everything on the server appears to be okay except the store …
Status check … “Cannot find Newlinq server. Please try again later”
 
Try to submit a support ticket:
“A connection to newlinq.blueonyx.it could not be established. Without that 
you will not be able to submit a bug report or ticket.”
 
Yum up to date … 
___
Blueonyx mailing list
mailto:Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx



___
Blueonyx mailing list
Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx



___
Blueonyx mailing list
Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx

[BlueOnyx:22881] Re: Cannot accèss Newlinq to install packages!

[Colin Jack]

Hi Greg,

This is still not working right – came back for a while but now:

lynx: Can't access startfile http://newlinq.compassnetworks.com.au/

Can resolve URL okay from CLI:

[root@neptune admserv]# dig newlinq.compassnetworks.com.au

;; ANSWER SECTION:
newlinq.compassnetworks.com.au. 1454 IN A   203.26.211.2

Any thoughts.

Thanks

Colin

From: Blueonyx  on behalf of Greg Kuhnert 

Reply-To: BlueOnyx General Mailing List 
Date: Monday, 29 April 2019 at 23:29
To: BlueOnyx General Mailing List 
Subject: [BlueOnyx:22863] Re: Cannot accèss Newlinq to install packages!

Hi Colin. 

Check it with your browser http://newlinq.compassnetworks.com.au - you will see 
a message on screen. You can also use lynx to check it from your server. It 
will respond with a 500 response code, but you will still see the same message.

If it works on your PC but not your server, give me your IP address and I’ll 
investigate.

GK


On Apr 30, 2019, at 1:01 AM, Colin Jack  wrote:

I have fired up a new 5209R VPS to migrate an ailing 5208R but I need to 
install some pkgs.
Everything on the server appears to be okay except the store …
Status check … “Cannot find Newlinq server. Please try again later”
 
Try to submit a support ticket:
“A connection to newlinq.blueonyx.it could not be established. Without that you 
will not be able to submit a bug report or ticket.”
 
Yum up to date … 
___
Blueonyx mailing list
mailto:Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx



___
Blueonyx mailing list
Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx

[BlueOnyx:22880] Re: 5209R - can't create users

[Michael Stauber]

Hi Greg,

> I’d be looking at /var/log/messages to see what handler is causing the error

Yeah, the error happened before any handler could or did run. So it had
to be a CODB index issue, which it turned out to be. It's now fixed.

-- 
With best regards

Michael Stauber
___
Blueonyx mailing list
Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx

[BlueOnyx:22879] Re: 5209R - can't create users

[Michael Stauber]

Hi Colin,

> Has anybody any ideas?
> 
> I can’t create users on a new 5209R VPS that I have migrated to from 
> 5208R.
> 
> GUI shows UNKNOWN ERROR DURING CREATE
> 
> Message log shows CREATE User failed (-7)
> 
> Quotas are all good.
I just checked and you had a slightly corrupted CODB index:

[root@neptune ~]# /root/oid.sh
1-673
/usr/sausalito/codb/codb.oids reports:
1-644

Means:

Your CODB was using OIDS 1-673, but the CODB index said only 1-644 were
used.

When you created a user, CODB looked at the index and deducted that 645
would be the first free OID number to use for storing the data of the
new user. But when trying to create OID 645 it realized: "Oh buggers,
it's already in usage!"

That's what causes the "UNKNOWN ERROR DURING CREATE".

I just fixed the index in /usr/sausalito/codb/codb.oids and could create
(and then delete) a user. So it should be all good now.


-- 
With best regards

Michael Stauber
___
Blueonyx mailing list
Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx

[BlueOnyx:22878] Re: 5209R - can't create users

[Colin Jack]

Hi Greg,


This is create via guy, or CMU import? Either way, I’d be looking at 
/var/log/messages to see what handler is causing the error and starting there… 
Many of the handlers contain debug options - just changing the debug option 
might give you enough to get a clue or two

GK

This is via the GUI ... 

Following the CMU import I noticed that not all the users had migrated across.
When I try  recreating a user via the GUI:

GUI shows UNKNOWN ERROR DURING CREATE

/var/log/messages:

May  5 14:44:38 neptune cced(smd)[29735]: client 7:[49:11679]: CREATE  "User" 
"fullName" "=" "test user" "ftpDisabled" "=" "1" "capLevels" "=" "" "sortName" 
"=" "" "emailDisabled" "=" "0" "volume" "=" "/home" "description" "=" "" "name" 
"=" "testuser" "password" "=" xxx "stylePreference" "=" "BlueOnyx" "site" "=" 
"site27" "enabled" "=" "1" "localePreference" "=" "browser"
May  5 14:44:38 neptune cced(smd)[29735]: client 7:[49:11679]: CREATE User 
failed (-7)

Similar issue with creating a new vsite.

Thanks

Colin
 


___
Blueonyx mailing list
Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx

[BlueOnyx:22877] Re: 5209R - can't create users

[Greg Kuhnert]

This is create via guy, or CMU import? Either way, I’d be looking at 
/var/log/messages to see what handler is causing the error and starting there… 
Many of the handlers contain debug options - just changing the debug option 
might give you enough to get a clue or two

GK

> On May 5, 2019, at 5:36 AM, Colin Jack  wrote:
> 
> Has anybody any ideas?
> 
> Colin
> 
> -Original Message-
> From: Blueonyx  on behalf of Colin Jack 
> 
> Reply-To: BlueOnyx General Mailing List 
> Date: Wednesday, 1 May 2019 at 12:20
> To: BlueOnyx General Mailing List 
> Subject: [BlueOnyx:22865] 5209R - can't create users
> 
>I can’t create users on a new 5209R VPS that I have migrated to from 5208R.
> 
>GUI shows UNKNOWN ERROR DURING CREATE
> 
>Message log shows CREATE User failed (-7)
> 
>Quotas are all good.
> 
>Have run 
> 
>/usr/sausalito/sbin/fix_user_UID_and_GID.pl
>/usr/sausalito/sbin/web_alias_redirects.pl --enabled
>/usr/sausalito/sbin/fix_user_suspension.pl
>/usr/sausalito/sbin/fix_web-and-email-server-aliasses.pl
> 
>Not all the users migrated across - hence trying to add them again.
> 
>What to do?
> 
>Thanks
> 
>Colin
> 
> 
> 
>___
>Blueonyx mailing list
>Blueonyx@mail.blueonyx.it
>http://mail.blueonyx.it/mailman/listinfo/blueonyx
> 
> 
> 
> ___
> Blueonyx mailing list
> Blueonyx@mail.blueonyx.it
> http://mail.blueonyx.it/mailman/listinfo/blueonyx


___
Blueonyx mailing list
Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx

[BlueOnyx:22876] Re: CERTINFO missing from our curl

[Chris Gebhardt - VIRTBIZ Internet]

On 5/4/2019 1:27 PM, Michael Stauber wrote:

I think I have this sorted and will be releasing PHP-7.1, 7.2 and 7.3
PKGs that use the lastest curl-7.65.0 that's installed into
/home/solarspeed/curl/.

The PKGs should become available on NewLinQ within the next 24 hours.


Thanks, Michael.   I will be on the lookout for the new packages.  
Nothing yet, but it hasn't been 24 hours, either.  ;)


Thanks for having a look at this.

--
Chris Gebhardt
VIRTBIZ Internet Services
Access, Web Hosting, Colocation, Dedicated
www.virtbiz.com | toll-free (866) 4 VIRTBIZ

___
Blueonyx mailing list
Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx

[BlueOnyx:22875] Re: 5209R - can't create users

[Colin Jack]

Can't create users or vsites ... (
Plenty of inodes.

Colin

-Original Message-
From: Blueonyx  on behalf of Ken Hohhof 

Reply-To: BlueOnyx General Mailing List 
Date: Saturday, 4 May 2019 at 22:32
To: 'BlueOnyx General Mailing List' 
Subject: [BlueOnyx:22873] Re: 5209R - can't create users

Long time ago and not on 5209R, probably 5208, I remember having to try 
twice adding either a virtual site or a new user, I can't remember which.  The 
second time it would go through.  Unlikely this will solve your problem, but 
have you tried a second time?

-Original Message-
From: Blueonyx  On Behalf Of Colin Jack
Sent: Saturday, May 4, 2019 2:36 PM
To: BlueOnyx General Mailing List 
Subject: [BlueOnyx:22872] Re: 5209R - can't create users

Has anybody any ideas?

Colin

-Original Message-
From: Blueonyx  on behalf of Colin Jack 

Reply-To: BlueOnyx General Mailing List 
Date: Wednesday, 1 May 2019 at 12:20
To: BlueOnyx General Mailing List 
Subject: [BlueOnyx:22865] 5209R - can't create users

I can’t create users on a new 5209R VPS that I have migrated to from 
5208R.

GUI shows UNKNOWN ERROR DURING CREATE

Message log shows CREATE User failed (-7)

Quotas are all good.

Have run 

/usr/sausalito/sbin/fix_user_UID_and_GID.pl
/usr/sausalito/sbin/web_alias_redirects.pl --enabled
/usr/sausalito/sbin/fix_user_suspension.pl
/usr/sausalito/sbin/fix_web-and-email-server-aliasses.pl

Not all the users migrated across - hence trying to add them again.

What to do?

Thanks

Colin



___
Blueonyx mailing list
Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx



___
Blueonyx mailing list
Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx



___
Blueonyx mailing list
Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx



___
Blueonyx mailing list
Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx

[BlueOnyx:22874] Re: 5209R - can't create users

[Colin Jack]

Hi Ken,

Long time ago and not on 5209R, probably 5208, I remember having to try 
twice adding either a virtual site or a new user, I can't remember which.   

 The second time it would go through.  Unlikely this will solve your 
problem, but have you tried a second time?

More than twice ... (

It is probably something fairly straight forward but at the moment I can't add 
anything.

Hoping someone with more knowledge than me will help.

Regards

Colin

 


___
Blueonyx mailing list
Blueonyx@mail.blueonyx.it
http://mail.blueonyx.it/mailman/listinfo/blueonyx