Re: [BVARC] Signal noise and suggestion on how to reduce it
Hi Venkata, Vertical antennas are noisy because most man-made noise is vertically polarized. An inverted V on 20 meters with the apex at the top of a 6-foot fence and the ends about a foot above the ground will be quitter and may even give you better coverage. You can make a fence tip antenna out of a few dollars' worth of wire and have some fun. I have good luck nation wide with my fence mounted antenna and a hundred wats. And best of all , my HOA has no idea I'm a ham. Look up NVIS antennas on the internet. There is a lot of info on these low wire antennas. Nick, KE5AY -Original Message- From: BVARC On Behalf Of Venkata Appala via BVARC Sent: Wednesday, September 27, 2023 4:28 PM To: bvarc@bvarc.org Cc: Venkata Appala Subject: [BVARC] Signal noise and suggestion on how to reduce it Afternoon, First of all, thank you for all the responses to my last email about antennas. I have another question related to the same topic and looking off some guidance. I normally setup my hf antenna for weekend use in my backyard. It’s a mfj 1979 17ft vertical. It is mounted on a flag pole rod that I just hammer into the soil close to the backyard fence. I have two sets of 4 radials in 180 degree pattern since I have a fence on the other side. When I use the rig expert to check swr, it’s always around 1.15-1.2. While the we is very low, the noise is crazy high. Most of the stations are extremely noisy. For some reason, I was able to hear really well few weeks ago. Is this something I am doing wrong or something to do with propagation ? For the above setup, I am always on 20m ssb. I do have few metal trellis hanging near to the antenna few ft away but I am not sure if they cause any interference. Disclaimer: I don’t know how to read the noise level on my radio yet, apologies if this is the most basic thing I should have known before I do anything. Trying to learn as quickly as I can 😄 Thanks, Venkata Appala Brazos Valley Amateur Radio Club BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/bvarc@bvarc.org/ Brazos Valley Amateur Radio Club BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/bvarc@bvarc.org/
Re: [BVARC] Signal noise and suggestion on how to reduce it
I am using the same type of antenna. The MFJ 1979. I have mine mounted on my metal fence in the backyard. I do have noise but since I got a new radio, the filter knocks it out and I am able to get good copies on everything. Check things like your power supply and cut the power off in the house and see if the noise drops at all. On His Majesty’s Service 73 de W1XQ Coastwatcher Reenactment RANVR Amateur Radio Lighthouse Society #182 > On Sep 27, 2023, at 4:49 PM, Nick Creason KE5QY via BVARC > wrote: > > Hi Venkata, > > Vertical antennas are noisy because most man-made noise is vertically > polarized. An inverted V on 20 meters with the apex at the top of a 6-foot > fence and the ends about a foot above the ground will be quitter and may even > give you better coverage. You can make a fence tip antenna out of a few > dollars' worth of wire and have some fun. > > I have good luck nation wide with my fence mounted antenna and a hundred > wats. And best of all , my HOA has no idea I'm a ham. > > Look up NVIS antennas on the internet. There is a lot of info on these low > wire antennas. > > Nick, KE5AY > > > > > > -Original Message- > From: BVARC On Behalf Of Venkata Appala via BVARC > Sent: Wednesday, September 27, 2023 4:28 PM > To: bvarc@bvarc.org > Cc: Venkata Appala > Subject: [BVARC] Signal noise and suggestion on how to reduce it > > Afternoon, >First of all, thank you for all the responses to my last email about > antennas. I have another question related to the same topic and looking off > some guidance. I normally setup my hf antenna for weekend use in my backyard. > It’s a mfj 1979 17ft vertical. It is mounted on a flag pole rod that I just > hammer into the soil close to the backyard fence. I have two sets of 4 > radials in 180 degree pattern since I have a fence on the other side. When I > use the rig expert to check swr, it’s always around 1.15-1.2. While the we is > very low, the noise is crazy high. Most of the stations are extremely noisy. > For some reason, I was able to hear really well few weeks ago. Is this > something I am doing wrong or something to do with propagation ? > > For the above setup, I am always on 20m ssb. I do have few metal trellis > hanging near to the antenna few ft away but I am not sure if they cause any > interference. > Disclaimer: I don’t know how to read the noise level on my radio yet, > apologies if this is the most basic thing I should have known before I do > anything. Trying to learn as quickly as I can 😄 > Thanks, > Venkata Appala > > Brazos Valley Amateur Radio Club > > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Publicly available archives are available here: > https://www.mail-archive.com/bvarc@bvarc.org/ > > > > Brazos Valley Amateur Radio Club > > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Publicly available archives are available here: > https://www.mail-archive.com/bvarc@bvarc.org/ Brazos Valley Amateur Radio Club BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/bvarc@bvarc.org/
Re: [BVARC] Signal noise and suggestion on how to reduce it
How long are the radials? The more copper you can put on the ground, the better. If they are about 15' long, doubling what you have should do a good job for you. Sent from my mobile phone Original message From: Venkata Appala via BVARC Date: 9/27/23 4:28 PM (GMT-06:00) To: bvarc@bvarc.org Cc: Venkata Appala Subject: [BVARC] Signal noise and suggestion on how to reduce it Afternoon, First of all, thank you for all the responses to my last email about antennas. I have another question related to the same topic and looking off some guidance. I normally setup my hf antenna for weekend use in my backyard. It’s a mfj 1979 17ft vertical. It is mounted on a flag pole rod that I just hammer into the soil close to the backyard fence. I have two sets of 4 radials in 180 degree pattern since I have a fence on the other side. When I use the rig expert to check swr, it’s always around 1.15-1.2. While the we is very low, the noise is crazy high. Most of the stations are extremely noisy. For some reason, I was able to hear really well few weeks ago. Is this something I am doing wrong or something to do with propagation ? For the above setup, I am always on 20m ssb. I do have few metal trellis hanging near to the antenna few ft away but I am not sure if they cause any interference. Disclaimer: I don’t know how to read the noise level on my radio yet, apologies if this is the most basic thing I should have known before I do anything. Trying to learn as quickly as I can 😄 Thanks, Venkata Appala Brazos Valley Amateur Radio Club BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/bvarc@bvarc.org/ Brazos Valley Amateur Radio Club BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/bvarc@bvarc.org/
Re: [BVARC] Signal noise and suggestion on how to reduce it
Venkat, What is ur radio? Rick. W5RH Sent from my i-Thingamajig > On Sep 27, 2023, at 5:14 PM, John Pate via BVARC wrote: > > I am using the same type of antenna. The MFJ 1979. I have mine mounted on my > metal fence in the backyard. I do have noise but since I got a new radio, the > filter knocks it out and I am able to get good copies on everything. Check > things like your power supply and cut the power off in the house and see if > the noise drops at all. > > On His Majesty’s Service > 73 de W1XQ > Coastwatcher Reenactment > RANVR > Amateur Radio Lighthouse Society #182 > > >> On Sep 27, 2023, at 4:49 PM, Nick Creason KE5QY via BVARC >> wrote: >> >> Hi Venkata, >> >> Vertical antennas are noisy because most man-made noise is vertically >> polarized. An inverted V on 20 meters with the apex at the top of a 6-foot >> fence and the ends about a foot above the ground will be quitter and may >> even give you better coverage. You can make a fence tip antenna out of a >> few dollars' worth of wire and have some fun. >> >> I have good luck nation wide with my fence mounted antenna and a hundred >> wats. And best of all , my HOA has no idea I'm a ham. >> >> Look up NVIS antennas on the internet. There is a lot of info on these low >> wire antennas. >> >> Nick, KE5AY >> >> >> >> >> >> -Original Message- >> From: BVARC On Behalf Of Venkata Appala via BVARC >> Sent: Wednesday, September 27, 2023 4:28 PM >> To: bvarc@bvarc.org >> Cc: Venkata Appala >> Subject: [BVARC] Signal noise and suggestion on how to reduce it >> >> Afternoon, >> First of all, thank you for all the responses to my last email about >> antennas. I have another question related to the same topic and looking off >> some guidance. I normally setup my hf antenna for weekend use in my >> backyard. It’s a mfj 1979 17ft vertical. It is mounted on a flag pole rod >> that I just hammer into the soil close to the backyard fence. I have two >> sets of 4 radials in 180 degree pattern since I have a fence on the other >> side. When I use the rig expert to check swr, it’s always around 1.15-1.2. >> While the we is very low, the noise is crazy high. Most of the stations are >> extremely noisy. For some reason, I was able to hear really well few weeks >> ago. Is this something I am doing wrong or something to do with propagation ? >> >> For the above setup, I am always on 20m ssb. I do have few metal trellis >> hanging near to the antenna few ft away but I am not sure if they cause any >> interference. >> Disclaimer: I don’t know how to read the noise level on my radio yet, >> apologies if this is the most basic thing I should have known before I do >> anything. Trying to learn as quickly as I can 😄 >> Thanks, >> Venkata Appala >> >> Brazos Valley Amateur Radio Club >> >> BVARC mailing list >> BVARC@bvarc.org >> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >> Publicly available archives are available here: >> https://www.mail-archive.com/bvarc@bvarc.org/ >> >> >> >> Brazos Valley Amateur Radio Club >> >> BVARC mailing list >> BVARC@bvarc.org >> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >> Publicly available archives are available here: >> https://www.mail-archive.com/bvarc@bvarc.org/ > > > > Brazos Valley Amateur Radio Club > > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Publicly available archives are available here: > https://www.mail-archive.com/bvarc@bvarc.org/ Brazos Valley Amateur Radio Club BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/bvarc@bvarc.org/
Re: [BVARC] Signal noise and suggestion on how to reduce it
Hello everyone, Thank you for the quick replies. Sorry, was driving home and couldn’t reply earlier. About the radials, they are 14ft each copper wires. Thanks for the suggestion about extending them. Will try to build more in the coming weekend’s. On the radio, it’s a Yaesu ft710. I am using the dnr but last weekend was worse. I just went back and took down the antenna to figure out what’s going on. On the power, I need to look into it this weekend. I am using a surge protector connected to powerwerx supply. Will try to connect directly and see if that’s the culprit. About the inverted antenna, I need to explore this option. Should be a good learning experiment. Venkata Appala > On Sep 27, 2023, at 6:06 PM, Rick Hiller wrote: > > Venkat, > What is ur radio? > Rick. W5RH > > Sent from my i-Thingamajig > >> On Sep 27, 2023, at 5:14 PM, John Pate via BVARC wrote: >> >> I am using the same type of antenna. The MFJ 1979. I have mine mounted on >> my metal fence in the backyard. I do have noise but since I got a new radio, >> the filter knocks it out and I am able to get good copies on everything. >> Check things like your power supply and cut the power off in the house and >> see if the noise drops at all. >> >> On His Majesty’s Service >> 73 de W1XQ >> Coastwatcher Reenactment >> RANVR >> Amateur Radio Lighthouse Society #182 >> >> On Sep 27, 2023, at 4:49 PM, Nick Creason KE5QY via BVARC wrote: >>> >>> Hi Venkata, >>> >>> Vertical antennas are noisy because most man-made noise is vertically >>> polarized. An inverted V on 20 meters with the apex at the top of a >>> 6-foot fence and the ends about a foot above the ground will be quitter and >>> may even give you better coverage. You can make a fence tip antenna out of >>> a few dollars' worth of wire and have some fun. >>> >>> I have good luck nation wide with my fence mounted antenna and a hundred >>> wats. And best of all , my HOA has no idea I'm a ham. >>> >>> Look up NVIS antennas on the internet. There is a lot of info on these low >>> wire antennas. >>> >>> Nick, KE5AY >>> >>> >>> >>> >>> >>> -Original Message- >>> From: BVARC On Behalf Of Venkata Appala via BVARC >>> Sent: Wednesday, September 27, 2023 4:28 PM >>> To: bvarc@bvarc.org >>> Cc: Venkata Appala >>> Subject: [BVARC] Signal noise and suggestion on how to reduce it >>> >>> Afternoon, >>> First of all, thank you for all the responses to my last email about >>> antennas. I have another question related to the same topic and looking off >>> some guidance. I normally setup my hf antenna for weekend use in my >>> backyard. It’s a mfj 1979 17ft vertical. It is mounted on a flag pole rod >>> that I just hammer into the soil close to the backyard fence. I have two >>> sets of 4 radials in 180 degree pattern since I have a fence on the other >>> side. When I use the rig expert to check swr, it’s always around 1.15-1.2. >>> While the we is very low, the noise is crazy high. Most of the stations are >>> extremely noisy. For some reason, I was able to hear really well few weeks >>> ago. Is this something I am doing wrong or something to do with propagation >>> ? >>> >>> For the above setup, I am always on 20m ssb. I do have few metal trellis >>> hanging near to the antenna few ft away but I am not sure if they cause any >>> interference. >>> Disclaimer: I don’t know how to read the noise level on my radio yet, >>> apologies if this is the most basic thing I should have known before I do >>> anything. Trying to learn as quickly as I can 😄 >>> Thanks, >>> Venkata Appala >>> >>> Brazos Valley Amateur Radio Club >>> >>> BVARC mailing list >>> BVARC@bvarc.org >>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >>> Publicly available archives are available here: >>> https://www.mail-archive.com/bvarc@bvarc.org/ >>> >>> >>> >>> Brazos Valley Amateur Radio Club >>> >>> BVARC mailing list >>> BVARC@bvarc.org >>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >>> Publicly available archives are available here: >>> https://www.mail-archive.com/bvarc@bvarc.org/ >> >> >> >> Brazos Valley Amateur Radio Club >> >> BVARC mailing list >> BVARC@bvarc.org >> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >> Publicly available archives are available here: >> https://www.mail-archive.com/bvarc@bvarc.org/ Brazos Valley Amateur Radio Club BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/bvarc@bvarc.org/
Re: [BVARC] Signal noise and suggestion on how to reduce it
I have found that I can get noise sometimes when the dishwasher or washer/dryer is running. Keep the coax as far away from house walls (wiring) as you can. May help. Also, learn to narrow your filters. I think you can do that on the Yaesu. But if you can, test the radio with various things in the house turned off and on. You may well find a culprit. Sent from my mobile phone Original message From: Venkata Appala via BVARC Date: 9/27/23 6:14 PM (GMT-06:00) To: Rick Hiller Cc: Venkata Appala , BRAZOS VALLEY AMATEUR RADIO CLUB , John Pate , ke...@att.net Subject: Re: [BVARC] Signal noise and suggestion on how to reduce it Hello everyone, Thank you for the quick replies. Sorry, was driving home and couldn’t reply earlier. About the radials, they are 14ft each copper wires. Thanks for the suggestion about extending them. Will try to build more in the coming weekend’s. On the radio, it’s a Yaesu ft710. I am using the dnr but last weekend was worse. I just went back and took down the antenna to figure out what’s going on. On the power, I need to look into it this weekend. I am using a surge protector connected to powerwerx supply. Will try to connect directly and see if that’s the culprit. About the inverted antenna, I need to explore this option. Should be a good learning experiment. Venkata Appala > On Sep 27, 2023, at 6:06 PM, Rick Hiller wrote: > > Venkat, > What is ur radio? > Rick. W5RH > > Sent from my i-Thingamajig > >> On Sep 27, 2023, at 5:14 PM, John Pate via BVARC wrote: >> >> I am using the same type of antenna. The MFJ 1979. I have mine mounted on >> my metal fence in the backyard. I do have noise but since I got a new radio, >> the filter knocks it out and I am able to get good copies on everything. >> Check things like your power supply and cut the power off in the house and >> see if the noise drops at all. >> >> On His Majesty’s Service >> 73 de W1XQ >> Coastwatcher Reenactment >> RANVR >> Amateur Radio Lighthouse Society #182 >> >> >>>> On Sep 27, 2023, at 4:49 PM, Nick Creason KE5QY via BVARC >>>> wrote: >>> >>> Hi Venkata, >>> >>> Vertical antennas are noisy because most man-made noise is vertically >>> polarized. An inverted V on 20 meters with the apex at the top of a >>> 6-foot fence and the ends about a foot above the ground will be quitter and >>> may even give you better coverage. You can make a fence tip antenna out of >>> a few dollars' worth of wire and have some fun. >>> >>> I have good luck nation wide with my fence mounted antenna and a hundred >>> wats. And best of all , my HOA has no idea I'm a ham. >>> >>> Look up NVIS antennas on the internet. There is a lot of info on these low >>> wire antennas. >>> >>> Nick, KE5AY >>> >>> >>> >>> >>> >>> -Original Message- >>> From: BVARC On Behalf Of Venkata Appala via BVARC >>> Sent: Wednesday, September 27, 2023 4:28 PM >>> To: bvarc@bvarc.org >>> Cc: Venkata Appala >>> Subject: [BVARC] Signal noise and suggestion on how to reduce it >>> >>> Afternoon, >>> First of all, thank you for all the responses to my last email about >>> antennas. I have another question related to the same topic and looking off >>> some guidance. I normally setup my hf antenna for weekend use in my >>> backyard. It’s a mfj 1979 17ft vertical. It is mounted on a flag pole rod >>> that I just hammer into the soil close to the backyard fence. I have two >>> sets of 4 radials in 180 degree pattern since I have a fence on the other >>> side. When I use the rig expert to check swr, it’s always around 1.15-1.2. >>> While the we is very low, the noise is crazy high. Most of the stations are >>> extremely noisy. For some reason, I was able to hear really well few weeks >>> ago. Is this something I am doing wrong or something to do with propagation >>> ? >>> >>> For the above setup, I am always on 20m ssb. I do have few metal trellis >>> hanging near to the antenna few ft away but I am not sure if they cause any >>> interference. >>> Disclaimer: I don’t know how to read the noise level on my radio yet, >>> apologies if this is the most basic thing I should have known before I do >>> anything. Trying to learn as quickly as I can 😄 >>> Thanks, >>> Venkata Appala >>> >>> Brazos Valley Amateur Radio Club >>> >>> BVARC mail
Re: [BVARC] Signal noise and suggestion on how to reduce it
Venkata, you and I have the same radio and antenna! On His Majesty’s Service 73 de W1XQ Coastwatcher Reenactment RANVR > On Sep 27, 2023, at 6:14 PM, Venkata Appala wrote: > > Hello everyone, > Thank you for the quick replies. Sorry, was driving home and couldn’t reply > earlier. > > About the radials, they are 14ft each copper wires. Thanks for the suggestion > about extending them. Will try to build more in the coming weekend’s. > > On the radio, it’s a Yaesu ft710. I am using the dnr but last weekend was > worse. I just went back and took down the antenna to figure out what’s going > on. > On the power, I need to look into it this weekend. I am using a surge > protector connected to powerwerx supply. Will try to connect directly and see > if that’s the culprit. > About the inverted antenna, I need to explore this option. Should be a good > learning experiment. > > Venkata Appala > >> On Sep 27, 2023, at 6:06 PM, Rick Hiller wrote: >> >> Venkat, >> What is ur radio? >> Rick. W5RH >> >> Sent from my i-Thingamajig >> On Sep 27, 2023, at 5:14 PM, John Pate via BVARC wrote: >>> >>> I am using the same type of antenna. The MFJ 1979. I have mine mounted on >>> my metal fence in the backyard. I do have noise but since I got a new >>> radio, the filter knocks it out and I am able to get good copies on >>> everything. Check things like your power supply and cut the power off in >>> the house and see if the noise drops at all. >>> >>> On His Majesty’s Service >>> 73 de W1XQ >>> Coastwatcher Reenactment >>> RANVR >>> Amateur Radio Lighthouse Society #182 >>> >>> > On Sep 27, 2023, at 4:49 PM, Nick Creason KE5QY via BVARC > wrote: Hi Venkata, Vertical antennas are noisy because most man-made noise is vertically polarized. An inverted V on 20 meters with the apex at the top of a 6-foot fence and the ends about a foot above the ground will be quitter and may even give you better coverage. You can make a fence tip antenna out of a few dollars' worth of wire and have some fun. I have good luck nation wide with my fence mounted antenna and a hundred wats. And best of all , my HOA has no idea I'm a ham. Look up NVIS antennas on the internet. There is a lot of info on these low wire antennas. Nick, KE5AY -Original Message- From: BVARC On Behalf Of Venkata Appala via BVARC Sent: Wednesday, September 27, 2023 4:28 PM To: bvarc@bvarc.org Cc: Venkata Appala Subject: [BVARC] Signal noise and suggestion on how to reduce it Afternoon, First of all, thank you for all the responses to my last email about antennas. I have another question related to the same topic and looking off some guidance. I normally setup my hf antenna for weekend use in my backyard. It’s a mfj 1979 17ft vertical. It is mounted on a flag pole rod that I just hammer into the soil close to the backyard fence. I have two sets of 4 radials in 180 degree pattern since I have a fence on the other side. When I use the rig expert to check swr, it’s always around 1.15-1.2. While the we is very low, the noise is crazy high. Most of the stations are extremely noisy. For some reason, I was able to hear really well few weeks ago. Is this something I am doing wrong or something to do with propagation ? For the above setup, I am always on 20m ssb. I do have few metal trellis hanging near to the antenna few ft away but I am not sure if they cause any interference. Disclaimer: I don’t know how to read the noise level on my radio yet, apologies if this is the most basic thing I should have known before I do anything. Trying to learn as quickly as I can 😄 Thanks, Venkata Appala Brazos Valley Amateur Radio Club BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/bvarc@bvarc.org/ Brazos Valley Amateur Radio Club BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/bvarc@bvarc.org/ >>> >>> >>> >>> Brazos Valley Amateur Radio Club >>> >>> BVARC mailing list >>> BVARC@bvarc.org >>> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >>> Publicly available archives are available here: >>> https://www.mail-archive.com/bvarc@bvarc.org/ > > > Brazos Valley Amateur Radio Club > > BVARC mailing list > BVARC@bvarc.org > http://mai
Re: [BVARC] Signal noise and suggestion on how to reduce it
Jeff, you might have solved my problem. Couple weeks ago, I started routing my cable via kitchen to avoid kids( one of them is just 3 yr old) and close to the appliances. That might be it. I will go back to my old way of routing cables. Thank you for the suggestion. Venkata Appala > On Sep 27, 2023, at 6:56 PM, John via BVARC wrote: > > Venkata, you and I have the same radio and antenna! > > On His Majesty’s Service > 73 de W1XQ > Coastwatcher Reenactment > RANVR > > >> On Sep 27, 2023, at 6:14 PM, Venkata Appala wrote: >> >> Hello everyone, >> Thank you for the quick replies. Sorry, was driving home and couldn’t reply >> earlier. >> >> About the radials, they are 14ft each copper wires. Thanks for the >> suggestion about extending them. Will try to build more in the coming >> weekend’s. >> >> On the radio, it’s a Yaesu ft710. I am using the dnr but last weekend was >> worse. I just went back and took down the antenna to figure out what’s going >> on. >> On the power, I need to look into it this weekend. I am using a surge >> protector connected to powerwerx supply. Will try to connect directly and >> see if that’s the culprit. >> About the inverted antenna, I need to explore this option. Should be a good >> learning experiment. >> >> Venkata Appala >> On Sep 27, 2023, at 6:06 PM, Rick Hiller wrote: >>> >>> Venkat, >>> What is ur radio? >>> Rick. W5RH >>> >>> Sent from my i-Thingamajig >>> > On Sep 27, 2023, at 5:14 PM, John Pate via BVARC wrote: I am using the same type of antenna. The MFJ 1979. I have mine mounted on my metal fence in the backyard. I do have noise but since I got a new radio, the filter knocks it out and I am able to get good copies on everything. Check things like your power supply and cut the power off in the house and see if the noise drops at all. On His Majesty’s Service 73 de W1XQ Coastwatcher Reenactment RANVR Amateur Radio Lighthouse Society #182 >> On Sep 27, 2023, at 4:49 PM, Nick Creason KE5QY via BVARC >> wrote: > > Hi Venkata, > > Vertical antennas are noisy because most man-made noise is vertically > polarized. An inverted V on 20 meters with the apex at the top of a > 6-foot fence and the ends about a foot above the ground will be quitter > and may even give you better coverage. You can make a fence tip antenna > out of a few dollars' worth of wire and have some fun. > > I have good luck nation wide with my fence mounted antenna and a hundred > wats. And best of all , my HOA has no idea I'm a ham. > > Look up NVIS antennas on the internet. There is a lot of info on these > low wire antennas. > > Nick, KE5AY > > > > > > -Original Message- > From: BVARC On Behalf Of Venkata Appala via > BVARC > Sent: Wednesday, September 27, 2023 4:28 PM > To: bvarc@bvarc.org > Cc: Venkata Appala > Subject: [BVARC] Signal noise and suggestion on how to reduce it > > Afternoon, > First of all, thank you for all the responses to my last email about > antennas. I have another question related to the same topic and looking > off some guidance. I normally setup my hf antenna for weekend use in my > backyard. It’s a mfj 1979 17ft vertical. It is mounted on a flag pole rod > that I just hammer into the soil close to the backyard fence. I have two > sets of 4 radials in 180 degree pattern since I have a fence on the > other side. When I use the rig expert to check swr, it’s always around > 1.15-1.2. While the we is very low, the noise is crazy high. Most of the > stations are extremely noisy. For some reason, I was able to hear really > well few weeks ago. Is this something I am doing wrong or something to do > with propagation ? > > For the above setup, I am always on 20m ssb. I do have few metal trellis > hanging near to the antenna few ft away but I am not sure if they cause > any interference. > Disclaimer: I don’t know how to read the noise level on my radio yet, > apologies if this is the most basic thing I should have known before I do > anything. Trying to learn as quickly as I can 😄 > Thanks, > Venkata Appala > > Brazos Valley Amateur Radio Club > > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Publicly available archives are available here: > https://www.mail-archive.com/bvarc@bvarc.org/ > > > > Brazos Valley Amateur Radio Club > > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Publicly available archives are available here: > https://www.mail-
Re: [BVARC] Signal noise and suggestion on how to reduce it
That’s awesome John. Loving the radio. The antenna setup is super fast as well. I am done in 5 mins. Just purchased the wolf river coil and hopefully, will join the bvarc rag chew soon. Venkata Appala > On Sep 27, 2023, at 6:56 PM, John via BVARC wrote: > > Venkata, you and I have the same radio and antenna! > > On His Majesty’s Service > 73 de W1XQ > Coastwatcher Reenactment > RANVR > > >> On Sep 27, 2023, at 6:14 PM, Venkata Appala wrote: >> >> Hello everyone, >> Thank you for the quick replies. Sorry, was driving home and couldn’t reply >> earlier. >> >> About the radials, they are 14ft each copper wires. Thanks for the >> suggestion about extending them. Will try to build more in the coming >> weekend’s. >> >> On the radio, it’s a Yaesu ft710. I am using the dnr but last weekend was >> worse. I just went back and took down the antenna to figure out what’s going >> on. >> On the power, I need to look into it this weekend. I am using a surge >> protector connected to powerwerx supply. Will try to connect directly and >> see if that’s the culprit. >> About the inverted antenna, I need to explore this option. Should be a good >> learning experiment. >> >> Venkata Appala >> On Sep 27, 2023, at 6:06 PM, Rick Hiller wrote: >>> >>> Venkat, >>> What is ur radio? >>> Rick. W5RH >>> >>> Sent from my i-Thingamajig >>> > On Sep 27, 2023, at 5:14 PM, John Pate via BVARC wrote: I am using the same type of antenna. The MFJ 1979. I have mine mounted on my metal fence in the backyard. I do have noise but since I got a new radio, the filter knocks it out and I am able to get good copies on everything. Check things like your power supply and cut the power off in the house and see if the noise drops at all. On His Majesty’s Service 73 de W1XQ Coastwatcher Reenactment RANVR Amateur Radio Lighthouse Society #182 >> On Sep 27, 2023, at 4:49 PM, Nick Creason KE5QY via BVARC >> wrote: > > Hi Venkata, > > Vertical antennas are noisy because most man-made noise is vertically > polarized. An inverted V on 20 meters with the apex at the top of a > 6-foot fence and the ends about a foot above the ground will be quitter > and may even give you better coverage. You can make a fence tip antenna > out of a few dollars' worth of wire and have some fun. > > I have good luck nation wide with my fence mounted antenna and a hundred > wats. And best of all , my HOA has no idea I'm a ham. > > Look up NVIS antennas on the internet. There is a lot of info on these > low wire antennas. > > Nick, KE5AY > > > > > > -Original Message- > From: BVARC On Behalf Of Venkata Appala via > BVARC > Sent: Wednesday, September 27, 2023 4:28 PM > To: bvarc@bvarc.org > Cc: Venkata Appala > Subject: [BVARC] Signal noise and suggestion on how to reduce it > > Afternoon, > First of all, thank you for all the responses to my last email about > antennas. I have another question related to the same topic and looking > off some guidance. I normally setup my hf antenna for weekend use in my > backyard. It’s a mfj 1979 17ft vertical. It is mounted on a flag pole rod > that I just hammer into the soil close to the backyard fence. I have two > sets of 4 radials in 180 degree pattern since I have a fence on the > other side. When I use the rig expert to check swr, it’s always around > 1.15-1.2. While the we is very low, the noise is crazy high. Most of the > stations are extremely noisy. For some reason, I was able to hear really > well few weeks ago. Is this something I am doing wrong or something to do > with propagation ? > > For the above setup, I am always on 20m ssb. I do have few metal trellis > hanging near to the antenna few ft away but I am not sure if they cause > any interference. > Disclaimer: I don’t know how to read the noise level on my radio yet, > apologies if this is the most basic thing I should have known before I do > anything. Trying to learn as quickly as I can 😄 > Thanks, > Venkata Appala > > Brazos Valley Amateur Radio Club > > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Publicly available archives are available here: > https://www.mail-archive.com/bvarc@bvarc.org/ > > > > Brazos Valley Amateur Radio Club > > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Publicly available archives are available here: > https://www.mail-archive.com/bvarc@bvarc.org/
Re: [BVARC] Signal noise and suggestion on how to reduce it
On Yaesu radios ensure you pay attention to IPO -- Intercept Point Optimization setting. Also ensure your RF Gain is not on "13" (reference to Spinal Tap) but more at the point where the S meter is riding the band noise peaks. Also ensure you NB is off or if you need NB for some reason, adjust it to just handling the impulse noise and no further. Sorry it this is a repeat of info, but I have instructed quite a few Yaesu users to adjust their radios as they had all controls set to "13". it quieted their receivers down quite a bit. GL...73...Rick W5RH On Wed, Sep 27, 2023 at 7:05 PM Venkata Appala via BVARC wrote: > That’s awesome John. Loving the radio. The antenna setup is super fast as > well. I am done in 5 mins. Just purchased the wolf river coil and > hopefully, will join the bvarc rag chew soon. > Venkata Appala > > > On Sep 27, 2023, at 6:56 PM, John via BVARC wrote: > > > > Venkata, you and I have the same radio and antenna! > > > > On His Majesty’s Service > > 73 de W1XQ > > Coastwatcher Reenactment > > RANVR > > > > > >> On Sep 27, 2023, at 6:14 PM, Venkata Appala > wrote: > >> > >> Hello everyone, > >> Thank you for the quick replies. Sorry, was driving home and couldn’t > reply earlier. > >> > >> About the radials, they are 14ft each copper wires. Thanks for the > suggestion about extending them. Will try to build more in the coming > weekend’s. > >> > >> On the radio, it’s a Yaesu ft710. I am using the dnr but last weekend > was worse. I just went back and took down the antenna to figure out what’s > going on. > >> On the power, I need to look into it this weekend. I am using a surge > protector connected to powerwerx supply. Will try to connect directly and > see if that’s the culprit. > >> About the inverted antenna, I need to explore this option. Should be a > good learning experiment. > >> > >> Venkata Appala > >> > On Sep 27, 2023, at 6:06 PM, Rick Hiller > wrote: > >>> > >>> Venkat, > >>> What is ur radio? > >>> Rick. W5RH > >>> > >>> Sent from my i-Thingamajig > >>> > > On Sep 27, 2023, at 5:14 PM, John Pate via BVARC > wrote: > > I am using the same type of antenna. The MFJ 1979. I have mine > mounted on my metal fence in the backyard. I do have noise but since I got > a new radio, the filter knocks it out and I am able to get good copies on > everything. Check things like your power supply and cut the power off in > the house and see if the noise drops at all. > > On His Majesty’s Service > 73 de W1XQ > Coastwatcher Reenactment > RANVR > Amateur Radio Lighthouse Society #182 > > > >> On Sep 27, 2023, at 4:49 PM, Nick Creason KE5QY via BVARC < > bvarc@bvarc.org> wrote: > > > > Hi Venkata, > > > > Vertical antennas are noisy because most man-made noise is > vertically polarized. An inverted V on 20 meters with the apex at the top > of a 6-foot fence and the ends about a foot above the ground will be > quitter and may even give you better coverage. You can make a fence tip > antenna out of a few dollars' worth of wire and have some fun. > > > > I have good luck nation wide with my fence mounted antenna and a > hundred wats. And best of all , my HOA has no idea I'm a ham. > > > > Look up NVIS antennas on the internet. There is a lot of info on > these low wire antennas. > > > > Nick, KE5AY > > > > > > > > > > > > -Original Message- > > From: BVARC On Behalf Of Venkata Appala > via BVARC > > Sent: Wednesday, September 27, 2023 4:28 PM > > To: bvarc@bvarc.org > > Cc: Venkata Appala > > Subject: [BVARC] Signal noise and suggestion on how to reduce it > > > > Afternoon, > > First of all, thank you for all the responses to my last email about > antennas. I have another question related to the same topic and looking off > some guidance. I normally setup my hf antenna for weekend use in my > backyard. It’s a mfj 1979 17ft vertical. It is mounted on a flag pole rod > that I just hammer into the soil close to the backyard fence. I have two > sets of 4 radials in 180 degree pattern since I have a fence on the other > side. When I use the rig expert to check swr, it’s always around 1.15-1.2. > While the we is very low, the noise is crazy high. Most of the stations are > extremely noisy. For some reason, I was able to hear really well few weeks > ago. Is this something I am doing wrong or something to do with propagation > ? > > > > For the above setup, I am always on 20m ssb. I do have few metal > trellis hanging near to the antenna few ft away but I am not sure if they > cause any interference. > > Disclaimer: I don’t know how to read the noise level on my radio > yet, apologies if this is the most basic thing I should have known before I > do anything. Trying to learn as quickly as I can 😄 > > Thanks, > > Venkata Appala > > > > Braz
Re: [BVARC] Signal noise and suggestion on how to reduce it
Cool thanks for this info Rick. Up until just a few years ago I have always been a die-hard Kenwood guy for HF (TS-120 then TS-570S), now the very popular 991a, I never would have known this info. And believe it or not, I’ve read through the operators manual more than once. Next time I fire it up, I will definitely have to tweak my RF Gain and see what happens. 73/Chris/AC5CM From: BVARC On Behalf Of Rick Hiller via BVARC Sent: Thursday, September 28, 2023 7:52 PM To: BRAZOS VALLEY AMATEUR RADIO CLUB Cc: Rick Hiller Subject: Re: [BVARC] Signal noise and suggestion on how to reduce it On Yaesu radios ensure you pay attention to IPO -- Intercept Point Optimization setting. Also ensure your RF Gain is not on "13" (reference to Spinal Tap) but more at the point where the S meter is riding the band noise peaks. Also ensure you NB is off or if you need NB for some reason, adjust it to just handling the impulse noise and no further. Sorry it this is a repeat of info, but I have instructed quite a few Yaesu users to adjust their radios as they had all controls set to "13". it quieted their receivers down quite a bit. GL...73...Rick W5RH On Wed, Sep 27, 2023 at 7:05 PM Venkata Appala via BVARC mailto:bvarc@bvarc.org>> wrote: That’s awesome John. Loving the radio. The antenna setup is super fast as well. I am done in 5 mins. Just purchased the wolf river coil and hopefully, will join the bvarc rag chew soon. Venkata Appala > On Sep 27, 2023, at 6:56 PM, John via BVARC > mailto:bvarc@bvarc.org>> wrote: > > Venkata, you and I have the same radio and antenna! > > On His Majesty’s Service > 73 de W1XQ > Coastwatcher Reenactment > RANVR > > >> On Sep 27, 2023, at 6:14 PM, Venkata Appala >> mailto:pradhan...@gmail.com>> wrote: >> >> Hello everyone, >> Thank you for the quick replies. Sorry, was driving home and couldn’t reply >> earlier. >> >> About the radials, they are 14ft each copper wires. Thanks for the >> suggestion about extending them. Will try to build more in the coming >> weekend’s. >> >> On the radio, it’s a Yaesu ft710. I am using the dnr but last weekend was >> worse. I just went back and took down the antenna to figure out what’s going >> on. >> On the power, I need to look into it this weekend. I am using a surge >> protector connected to powerwerx supply. Will try to connect directly and >> see if that’s the culprit. >> About the inverted antenna, I need to explore this option. Should be a good >> learning experiment. >> >> Venkata Appala >> >>>> On Sep 27, 2023, at 6:06 PM, Rick Hiller >>>> mailto:rickhille...@gmail.com>> wrote: >>> >>> Venkat, >>> What is ur radio? >>> Rick. W5RH >>> >>> Sent from my i-Thingamajig >>> >>>>> On Sep 27, 2023, at 5:14 PM, John Pate via BVARC >>>>> mailto:bvarc@bvarc.org>> wrote: >>>> >>>> I am using the same type of antenna. The MFJ 1979. I have mine mounted on >>>> my metal fence in the backyard. I do have noise but since I got a new >>>> radio, the filter knocks it out and I am able to get good copies on >>>> everything. Check things like your power supply and cut the power off in >>>> the house and see if the noise drops at all. >>>> >>>> On His Majesty’s Service >>>> 73 de W1XQ >>>> Coastwatcher Reenactment >>>> RANVR >>>> Amateur Radio Lighthouse Society #182 >>>> >>>> >>>>>> On Sep 27, 2023, at 4:49 PM, Nick Creason KE5QY via BVARC >>>>>> mailto:bvarc@bvarc.org>> wrote: >>>>> >>>>> Hi Venkata, >>>>> >>>>> Vertical antennas are noisy because most man-made noise is vertically >>>>> polarized. An inverted V on 20 meters with the apex at the top of a >>>>> 6-foot fence and the ends about a foot above the ground will be quitter >>>>> and may even give you better coverage. You can make a fence tip antenna >>>>> out of a few dollars' worth of wire and have some fun. >>>>> >>>>> I have good luck nation wide with my fence mounted antenna and a hundred >>>>> wats. And best of all , my HOA has no idea I'm a ham. >>>>> >>>>> Look up NVIS antennas on the internet. There is a lot of info on these >>>>> low wire antennas. >>>>> >>>>> Nick, KE5AY >>>>> >>>>> >>>>> >>>>> &g
Re: [BVARC] Signal noise and suggestion on how to reduce it
Thank you Rick. I realize my knowledge on using the radio is very minimal and that can also be a factor. Ordered the radio today guide to ft 710. Amazon delivered it recently and Will go through it. It seems to have lot on it formation on how to use each knob/ setting on the radio. Thank you for the rf gain tip. I will check it this weekend.Venkata AppalaOn Sep 28, 2023, at 7:52 PM, Rick Hiller via BVARC wrote:On Yaesu radios ensure you pay attention to IPO -- Intercept Point Optimization setting. Also ensure your RF Gain is not on "13" (reference to Spinal Tap) but more at the point where the S meter is riding the band noise peaks. Also ensure you NB is off or if you need NB for some reason, adjust it to just handling the impulse noise and no further.Sorry it this is a repeat of info, but I have instructed quite a few Yaesu users to adjust their radios as they had all controls set to "13". it quieted their receivers down quite a bit.GL...73...Rick W5RHOn Wed, Sep 27, 2023 at 7:05 PM Venkata Appala via BVARCwrote:That’s awesome John. Loving the radio. The antenna setup is super fast as well. I am done in 5 mins. Just purchased the wolf river coil and hopefully, will join the bvarc rag chew soon. Venkata Appala > On Sep 27, 2023, at 6:56 PM, John via BVARC wrote: > > Venkata, you and I have the same radio and antenna! > > On His Majesty’s Service > 73 de W1XQ > Coastwatcher Reenactment > RANVR > > >> On Sep 27, 2023, at 6:14 PM, Venkata Appala wrote: >> >> Hello everyone, >> Thank you for the quick replies. Sorry, was driving home and couldn’t reply earlier. >> >> About the radials, they are 14ft each copper wires. Thanks for the suggestion about extending them. Will try to build more in the coming weekend’s. >> >> On the radio, it’s a Yaesu ft710. I am using the dnr but last weekend was worse. I just went back and took down the antenna to figure out what’s going on. >> On the power, I need to look into it this weekend. I am using a surge protector connected to powerwerx supply. Will try to connect directly and see if that’s the culprit. >> About the inverted antenna, I need to explore this option. Should be a good learning experiment. >> >> Venkata Appala >> On Sep 27, 2023, at 6:06 PM, Rick Hiller wrote: >>> >>> Venkat, >>> What is ur radio? >>> Rick. W5RH >>> >>> Sent from my i-Thingamajig >>> > On Sep 27, 2023, at 5:14 PM, John Pate via BVARC wrote: I am using the same type of antenna. The MFJ 1979. I have mine mounted on my metal fence in the backyard. I do have noise but since I got a new radio, the filter knocks it out and I am able to get good copies on everything. Check things like your power supply and cut the power off in the house and see if the noise drops at all. On His Majesty’s Service 73 de W1XQ Coastwatcher Reenactment RANVR Amateur Radio Lighthouse Society #182 >> On Sep 27, 2023, at 4:49 PM, Nick Creason KE5QY via BVARC wrote: > > Hi Venkata, > > Vertical antennas are noisy because most man-made noise is vertically polarized. An inverted V on 20 meters with the apex at the top of a 6-foot fence and the ends about a foot above the ground will be quitter and may even give you better coverage. You can make a fence tip antenna out of a few dollars' worth of wire and have some fun. > > I have good luck nation wide with my fence mounted antenna and a hundred wats. And best of all , my HOA has no idea I'm a ham. > > Look up NVIS antennas on the internet. There is a lot of info on these low wire antennas. > > Nick, KE5AY > > > > > > -Original Message- > From: BVARC On Behalf Of Venkata Appala via BVARC > Sent: Wednesday, September 27, 2023 4:28 PM > To: bvarc@bvarc.org > Cc: Venkata Appala > Subject: [BVARC] Signal noise and suggestion on how to reduce it > > Afternoon, > First of all, thank you for all the responses to my last email about antennas. I have another question related to the same topic and looking off some guidance. I normally setup my hf antenna for weekend use in my backyard. It’s a mfj 1979 17ft vertical. It is mounted on a flag pole rod that I just hammer into the soil close to the backyard fence. I have two sets of 4 radials in 180 degree pattern since I have a fence on the other side. When I use the rig expert to check swr, it’s always around 1.15-1.2. While the we is very low, the noise is crazy high. Most of the stations are extremely noisy. For some reason, I was able to hear really well few weeks ago. Is this something I am doing wrong or something to do with propagation ? > > For the above setup, I am always on 20m ssb. I do have few metal trellis hanging near to the antenna few ft
Re: [BVARC] Signal noise and suggestion on how to reduce it
Venkat and Chris, Have a read of this Radio Hotel column...from September 2017 https://bvarc.org/rh/rh_1709.pdf HF Receiver Basics It might shed some light on your issues. Might not solve the noise problem completely, but it will steer you in the direction of having your HF receiver set up properly. At the end of this Radio Hotel article is a reference to an ARRL "The Doctor is In" podcast with Joel Hallas (sk) that will add some additional enlightenment. Do a search on QST for HF Receiving. Lastly, the ARRL Operators Manual will shed some light too along with a visit from your well experienced Elmer. . Looks like you are on the path to understanding HF receiving. I wish you well. Enjoy the hobby73...Rick W5RH On Thu, Sep 28, 2023 at 8:45 PM Venkata Appala wrote: > Thank you Rick. I realize my knowledge on using the radio is very minimal > and that can also be a factor. Ordered the radio today guide to ft 710. > Amazon delivered it recently and Will go through it. It seems to have lot > on it formation on how to use each knob/ setting on the radio. Thank you > for the rf gain tip. I will check it this weekend. > > Venkata Appala > > On Sep 28, 2023, at 7:52 PM, Rick Hiller via BVARC > wrote: > > > On Yaesu radios ensure you pay attention to IPO -- Intercept Point > Optimization setting. Also ensure your RF Gain is not on "13" > (reference to Spinal Tap) but more at the point where the S meter is riding > the band noise peaks. Also ensure you NB is off or if you need NB for some > reason, adjust it to just handling the impulse noise and no further. > Sorry it this is a repeat of info, but I have instructed quite a few Yaesu > users to adjust their radios as they had all controls set to "13". it > quieted their receivers down quite a bit. > GL...73...Rick W5RH > > On Wed, Sep 27, 2023 at 7:05 PM Venkata Appala via BVARC > wrote: > >> That’s awesome John. Loving the radio. The antenna setup is super fast as >> well. I am done in 5 mins. Just purchased the wolf river coil and >> hopefully, will join the bvarc rag chew soon. >> Venkata Appala >> >> > On Sep 27, 2023, at 6:56 PM, John via BVARC wrote: >> > >> > Venkata, you and I have the same radio and antenna! >> > >> > On His Majesty’s Service >> > 73 de W1XQ >> > Coastwatcher Reenactment >> > RANVR >> > >> > >> >> On Sep 27, 2023, at 6:14 PM, Venkata Appala >> wrote: >> >> >> >> Hello everyone, >> >> Thank you for the quick replies. Sorry, was driving home and couldn’t >> reply earlier. >> >> >> >> About the radials, they are 14ft each copper wires. Thanks for the >> suggestion about extending them. Will try to build more in the coming >> weekend’s. >> >> >> >> On the radio, it’s a Yaesu ft710. I am using the dnr but last weekend >> was worse. I just went back and took down the antenna to figure out what’s >> going on. >> >> On the power, I need to look into it this weekend. I am using a surge >> protector connected to powerwerx supply. Will try to connect directly and >> see if that’s the culprit. >> >> About the inverted antenna, I need to explore this option. Should be a >> good learning experiment. >> >> >> >> Venkata Appala >> >> >> On Sep 27, 2023, at 6:06 PM, Rick Hiller >> wrote: >> >>> >> >>> Venkat, >> >>> What is ur radio? >> >>> Rick. W5RH >> >>> >> >>> Sent from my i-Thingamajig >> >>> >> > On Sep 27, 2023, at 5:14 PM, John Pate via BVARC >> wrote: >> >> I am using the same type of antenna. The MFJ 1979. I have mine >> mounted on my metal fence in the backyard. I do have noise but since I got >> a new radio, the filter knocks it out and I am able to get good copies on >> everything. Check things like your power supply and cut the power off in >> the house and see if the noise drops at all. >> >> On His Majesty’s Service >> 73 de W1XQ >> Coastwatcher Reenactment >> RANVR >> Amateur Radio Lighthouse Society #182 >> >> >> >> On Sep 27, 2023, at 4:49 PM, Nick Creason KE5QY via BVARC < >> bvarc@bvarc.org> wrote: >> > >> > Hi Venkata, >> > >> > Vertical antennas are noisy because most man-made noise is >> vertically polarized. An inverted V on 20 meters with the apex at the top >> of a 6-foot fence and the ends about a foot above the ground will be >> quitter and may even give you better coverage. You can make a fence tip >> antenna out of a few dollars' worth of wire and have some fun. >> > >> > I have good luck nation wide with my fence mounted antenna and a >> hundred wats. And best of all , my HOA has no idea I'm a ham. >> > >> > Look up NVIS antennas on the internet. There is a lot of info on >> these low wire antennas. >> > >> > Nick, KE5AY >> > >> > >> > >> > >> > >> > -Original Message- >> > From: BVARC On Behalf Of Venkata Appala >> via BVARC >> > Sent: Wednesday, September 27, 2023 4:28 PM >> > To: bvarc@bvarc.org >> > Cc: Venkata Appala >>
Re: [BVARC] Signal noise and suggestion on how to reduce it
I don't know if it was mentioned yet, but on my Yaesu FT-891 I typically have my DNR set to 4 and it seem to do a pretty good job of clearing up the audio. Also at a past Field Day event (all of them were in the past) at the GOTA station we were being hammered pretty good by the other stations at the KK5W site, so we found that using the attenuation function helped tremendously. It might help with the noise issue as well. 73 John Denison KD5YOU On 9/27/2023 4:28 PM, Venkata Appala via BVARC wrote: Afternoon, First of all, thank you for all the responses to my last email about antennas. I have another question related to the same topic and looking off some guidance. I normally setup my hf antenna for weekend use in my backyard. It’s a mfj 1979 17ft vertical. It is mounted on a flag pole rod that I just hammer into the soil close to the backyard fence. I have two sets of 4 radials in 180 degree pattern since I have a fence on the other side. When I use the rig expert to check swr, it’s always around 1.15-1.2. While the we is very low, the noise is crazy high. Most of the stations are extremely noisy. For some reason, I was able to hear really well few weeks ago. Is this something I am doing wrong or something to do with propagation ? For the above setup, I am always on 20m ssb. I do have few metal trellis hanging near to the antenna few ft away but I am not sure if they cause any interference. Disclaimer: I don’t know how to read the noise level on my radio yet, apologies if this is the most basic thing I should have known before I do anything. Trying to learn as quickly as I can 😄 Thanks, Venkata Appala Brazos Valley Amateur Radio Club BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/bvarc@bvarc.org/ Brazos Valley Amateur Radio Club BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/bvarc@bvarc.org/
Re: [BVARC] Signal noise and suggestion on how to reduce it
Thanks John. I set the DNR to 4 already. As Jeff(Greer) mentioned, it appears the main culprit could be the way I was running my coax in the home. I was running it near to the kitchen appliances and guess that interfered. I set up the radio this evening and it’s performing way better than last two weeks. I have to yet turn on the DNR today :). Rick sent a nice article on HF receiver basics and I am planning to go through it which might help understand the various components including attenuation. Thanks once again for the guidance, Venkata Appala KJ5BVS pradhan...@gmail.com > On Sep 28, 2023, at 11:27 PM, John Denison via BVARC wrote: > > I don't know if it was mentioned yet, but on my Yaesu FT-891 I typically have > my DNR set to 4 and it seem to do a pretty good job of clearing up the audio. > > Also at a past Field Day event (all of them were in the past) at the GOTA > station we were being hammered pretty good by the other stations at the KK5W > site, so we found that using the attenuation function helped tremendously. It > might help with the noise issue as well. > > 73 > John Denison > KD5YOU > > On 9/27/2023 4:28 PM, Venkata Appala via BVARC wrote: >> Afternoon, >> First of all, thank you for all the responses to my last email about >> antennas. I have another question related to the same topic and looking off >> some guidance. I normally setup my hf antenna for weekend use in my >> backyard. It’s a mfj 1979 17ft vertical. It is mounted on a flag pole rod >> that I just hammer into the soil close to the backyard fence. I have two >> sets of 4 radials in 180 degree pattern since I have a fence on the other >> side. When I use the rig expert to check swr, it’s always around 1.15-1.2. >> While the we is very low, the noise is crazy high. Most of the stations are >> extremely noisy. For some reason, I was able to hear really well few weeks >> ago. Is this something I am doing wrong or something to do with propagation ? >> >> For the above setup, I am always on 20m ssb. I do have few metal trellis >> hanging near to the antenna few ft away but I am not sure if they cause any >> interference. >> Disclaimer: I don’t know how to read the noise level on my radio yet, >> apologies if this is the most basic thing I should have known before I do >> anything. Trying to learn as quickly as I can 😄 >> Thanks, >> Venkata Appala >> >> Brazos Valley Amateur Radio Club >> >> BVARC mailing list >> BVARC@bvarc.org >> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >> Publicly available archives are available here: >> https://www.mail-archive.com/bvarc@bvarc.org/ > > > > Brazos Valley Amateur Radio Club > > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Publicly available archives are available here: > https://www.mail-archive.com/bvarc@bvarc.org/ Brazos Valley Amateur Radio Club BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Publicly available archives are available here: https://www.mail-archive.com/bvarc@bvarc.org/