[OSL | CCIE_Voice] Layer 3 QOS Configuration
Hi, For g.711 & g.729 call in CCM it takes 80 kbps & 24 kbps, if it is Gatekeeper it takes 128 & 16 kbps. Now if I want to pass only 2 g.729 call in WAN QOS config how should I set the priority value and bandwidth for signal? Any suggested voice priority & signal bandwidth for layer three specific to g.711 and g.729 calls. Thanks, Bala. Send instant messages to your online friends http://uk.messenger.yahoo.com
[OSL | CCIE_Voice] FRTS QOS percent
Hi, FRTS question as follows: Configure FRTS between HQ and CME site, bandwidth of 128 kbps. Voice media traffic is strict-priority que guaranteed 33% of available bandwidth. Guarantee voice control traffic 5% of available bandwidth. The solution as follows: Method -1: Policy-map LLQ Class voice-media Priority percent 33 Class voice-sig Bandwidth percent 5 Method 2 Policy-map LLQ Class voice-media Priority 42 Class voice-sig Bandwidth 6 The above two config will accomplish the same or not? Can please let me know which one is the best method to use. Thanks, Bala. Send instant messages to your online friends http://uk.messenger.yahoo.com
Re: [OSL | CCIE_Voice] Mark signalling traffic in CCM.
Indeed correct Matt! :) Mark Snow CCIE #14073 (Voice, Security) CCSI #31583 Senior Technical Instructor - IPexpert, Inc. A Cisco Learning Partner - We Accept Learning Credits! Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto: [EMAIL PROTECTED] IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. On Jan 14, 2008, at 6:25 AM, Matthew Cody wrote: You may want to look carefully at the Service parameters also; I believe there are several sections there that give you the chance to adjust QoS markings. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] ] On Behalf Of Balamurugan Singaram Sent: Monday, January 14, 2008 8:06 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Mark signalling traffic in CCM. Hi, To mark signalling traffic in CCM, we can accomplish this only in Enterprise Parameter as follows: Dscp for SCCP phone-based services = default(0) Dscp for SCCP phone configuration = CS3 Dscp for CCM to device interface = CS3 Or could please let me know; there is any other place in CCM to mark signalling traffic. Thanks, Bala. Send instant messages to your online friends http://uk.messenger.yahoo.com
Re: [OSL | CCIE_Voice] SUB as first choice and PUB as second choice
If a call were going from UCME number 3001 to UCM number 1001 and the zone prefix chosen was a 1* - then your syntax might look something like this: zone prefix UCM 1* gw-priority 10 ucm_to_ucme_trunk_2 zone prefix UCM 1* gw-priority 9 ucm_to_ucme_trunk_1 Where 'ucm_to_ucme_trunk_2' is the name of a GK-Controlled ICT Trunk and _2 is the Subscriber based on it being the 2nd UCM registered to the Cluster. Without this gw-priority command - there is no way to ensure that the Sub will be first as the selected GW from GK. HTH, Mark Snow CCIE #14073 (Voice, Security) CCSI #31583 Senior Technical Instructor - IPexpert, Inc. A Cisco Learning Partner - We Accept Learning Credits! Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto: [EMAIL PROTECTED] IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. On Jan 14, 2008, at 5:53 AM, Balamurugan Singaram wrote: Hi, From CME , the calls should use the Subscriber as first choice, with the PUB as backup, now the CME is registered with Gatekeeper, so we will say outgoing calls from CME to hit GK [session target ras]. My question is how we you realize the call from CME to CCM will take SUB as first choice and PUB as second choice. Thanks, Bala. Send instant messages to your online friends http://uk.messenger.yahoo.com
Re: [OSL | CCIE_Voice] SUB as first choice and PUB as second choice
This is really a gatekeeper question; take a good look at some of the detailed syntax associated with the zone prefix command and I think you'll find it. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Balamurugan Singaram Sent: Monday, January 14, 2008 7:54 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] SUB as first choice and PUB as second choice Hi, >From CME , the calls should use the Subscriber as first choice, with the PUB as backup, now the CME is registered with Gatekeeper, so we will say outgoing calls from CME to hit GK [session target ras]. My question is how we you realize the call from CME to CCM will take SUB as first choice and PUB as second choice. Thanks, Bala. Send instant messages to your online friends http://uk.messenger.yahoo.com
Re: [OSL | CCIE_Voice] Mark signalling traffic in CCM.
You may want to look carefully at the Service parameters also; I believe there are several sections there that give you the chance to adjust QoS markings. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Balamurugan Singaram Sent: Monday, January 14, 2008 8:06 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Mark signalling traffic in CCM. Hi, To mark signalling traffic in CCM, we can accomplish this only in Enterprise Parameter as follows: Dscp for SCCP phone-based services = default(0) Dscp for SCCP phone configuration = CS3 Dscp for CCM to device interface = CS3 Or could please let me know; there is any other place in CCM to mark signalling traffic. Thanks, Bala. Send instant messages to your online friends http://uk.messenger.yahoo.com
[OSL | CCIE_Voice] Mark signalling traffic in CCM.
Hi, To mark signalling traffic in CCM, we can accomplish this only in Enterprise Parameter as follows: Dscp for SCCP phone-based services = default(0) Dscp for SCCP phone configuration = CS3 Dscp for CCM to device interface = CS3 Or could please let me know; there is any other place in CCM to mark signalling traffic. Thanks, Bala. Send instant messages to your online friends http://uk.messenger.yahoo.com
[OSL | CCIE_Voice] SUB as first choice and PUB as second choice
Hi, From CME , the calls should use the Subscriber as first choice, with the PUB as backup, now the CME is registered with Gatekeeper, so we will say outgoing calls from CME to hit GK [session target ras]. My question is how we you realize the call from CME to CCM will take SUB as first choice and PUB as second choice. Thanks, Bala. Send instant messages to your online friends http://uk.messenger.yahoo.com