[OSL | CCIE_Voice] Lab Date

[anil batra]

Hello Group,
 
I have lab date for Sydney May 14th and would like to swap with someone who has 
it for San Jose or RTP anytime before June end. Kindly let me know.
 
regds // anil


  

Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it be acceptable?

[Kapil Atrish]

Yup, you are right. Those are not under English_United States folder. You'll 
find ANN_Fastbusy.wav inside the path you;ve mentioned. So I believe it is 
correct.

Date: Tue, 3 Feb 2009 19:50:22 -0600
Subject: Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it be acceptable?
From: ryanstudyvo...@gmail.com
To: lovingprin...@gmail.com
CC: kapilatr...@hotmail.com; ccie_voice@onlinestudylist.com; 
gree...@googlemail.com; christian.hennr...@intact-is.com; anil...@yahoo.com

Where are the Blocked pattern reason codes greeting stored at?
Are they under program files>cisco>tftpath>united states

On Tue, Feb 3, 2009 at 12:46 AM, kamal yousaf  wrote:

Yeah..I did that but putting DN didn't work.You would need Secondary AC pilot 
#. Besides, I prefer to use Unity rather than going through this method.At 
least for lab, it won't be advisable unless strictly asked to do so.



On Tue, Feb 3, 2009 at 5:02 PM, Kapil Atrish  wrote:







Cool...I did not check for the TCD Service Parameter. I think if I set this 
parameter the second AC would not be required. I may simply put a DN as "Always 
route member" to extend fast busy to caller after initial MOH. Otherwise I'll 
also follow your solution.



Vik/Mark: Do you think it is an acceptable solution? Question is to customize 
annunciator and we are using MOH to acheive the results? 






Date: Tue, 3 Feb 2009 15:39:43 +1100

Subject: Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it be acceptable?
From: lovingprin...@gmail.com
To: kapilatr...@hotmail.com


CC: anthony.ye...@gmail.com; ccie_voice@onlinestudylist.com; 
gree...@googlemail.com; christian.hennr...@intact-is.com; anil...@yahoo.com



Kapil, 

 If you dial your first AC pilot # , you should hear greeting .If you dial 
second(dummy) AC pilot # , you should hear user busy.Now, When you link 2nd to 
first,i.e add 2nd AC pilot # as Always Route Member , after hold time expires, 
call will be routed to dummy pilot point and you will get 'user busy'.I did 
also change Service Parameter for TCD so that AC can route calls to directory 
numbers with unknown state.




Regds
On Mon, Feb 2, 2009 at 9:25 PM, Kapil Atrish  wrote:








Hi Kamal,

 

I created additional AC Pilot with queuing disabled and pointed first one to 
the new AC as "Alwasy Route Member". I keep on getting the MOH from first AC 
even though queuing timer is over. Can you pl comment if you achieved it 
differently?




 

I am able to route the call to a CTI_RP as "Alwasy Route Member" and point this 
RP to a route-pattern which further points it to the Gateway. The RP string is 
invalid and non-routable by the GW. Using this method, the caller simply gets 
dropped after queuing timer is over. No Fast-busy to caller but MOH gets 
played. 




 

When I try pointing AC "Always Route Member" filed to any Route-pattern 
directly, I get the following message:


The Directory Number you entered in the selected Partition is associated with a 
device that can not be a member of a Hunt Group.


 

Pl let me know how you achieved Anthony's method?


 





Date: Thu, 29 Jan 2009 18:05:31 +1100
Subject: Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it be acceptable?
From: lovingprin...@gmail.com



To: anthony.ye...@gmail.com
CC: kapilatr...@hotmail.com; ccie_voice@onlinestudylist.com; 
gree...@googlemail.com; christian.hennr...@intact-is.com; anil...@yahoo.com




I tested it and it works great.Thanks Anthony for kind help.



On Thu, Jan 29, 2009 at 3:52 PM, Anthony Yeung  wrote:

What you can try is assign a dummy AC pilot point to the original AC
Pilot Point as the 'Always Route Member' creating a linked hunt group.
Then for this second dummy AC pilot point assign a dummy AC user like



you did w/ the first. But instead, disable queuing for this second
dummy Pilot Point. After the hold time expires for the first AC pilot,
the call will be forwarded to the second AC pilot. Since queuing is
disabled, the call should drop BUT w/ a disconnect cause of 'user



busy'.




On Wed, Jan 28, 2009 at 11:15 AM, Kapil Atrish  wrote:
> I did not put the TP directly inside the Hunt-Group. I put a CTIRP as
> "Always Route Member" and on CTIRP I did a forward all to the TP.



>
> I am yet to try the solution given by Christian. I'll put the call to a
> gateway via RP and see if I can get fast-busy to the caller after initial
> queuing prompt.
>
> 



> Date: Tue, 27 Jan 2009 21:30:58 +1100
> Subject: Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it be acceptable?
> From: lovingprin...@gmail.com
> To: kapilatr...@hotmail.com
> CC: christian.hennr...@intact-is.com; gree...@googlemail.com;



> ccie_voice@onlinestudylist.com; anil...@yahoo.com
>
> I tried same way.It plays greeting only once.I also changed service
> parameter for Cisco TCD "Allow Routing with Unknown Line State" to True ,and



> retried.Call still doesn't end.
>
> Kapil,
>  how did you add TP as member in HuntGroup.In my case, it gives error saying
> that m

[OSL | CCIE_Voice] Extracting Tar locally on flash

[Ryan Trauernicht]

anyone ever extract a tar file that was copied over to the flash and then I
want to extract is locally.  I get the following error:
SiteB_RTR#archive tar /xtract flash:cme-gui-3.4.0.0.tar flash:
extracting admin_user.html (4308 bytes)
%Error opening flash:/admin_user.html (Device in exclusive use)

[OSL | CCIE_Voice] 6608

[omar itani]

hi guys how to reach the cat 6608 media resources in proctorlabs vrack!
_
Drag n’ drop—Get easy photo sharing with Windows Live™ Photos.

http://www.microsoft.com/windows/windowslive/photos.aspx

Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it be acceptable?

[Ryan Trauernicht]

Where are the Blocked pattern reason codes greeting stored at?
Are they under program files>cisco>tftpath>united states

On Tue, Feb 3, 2009 at 12:46 AM, kamal yousaf wrote:

> Yeah..I did that but putting DN didn't work.You would need Secondary AC
> pilot #. Besides, I prefer to use Unity rather than going through this
> method.At least for lab, it won't be advisable unless strictly asked to do
> so.
>
>
> On Tue, Feb 3, 2009 at 5:02 PM, Kapil Atrish wrote:
>
>>  Cool...I did not check for the TCD Service Parameter. I think if I set
>> this parameter the second AC would not be required. I may simply put a DN as
>> "Always route member" to extend fast busy to caller after initial MOH.
>> Otherwise I'll also follow your solution.
>>
>> Vik/Mark: Do you think it is an acceptable solution? Question is to
>> customize annunciator and we are using MOH to acheive the results?
>>
>>
>>
>>
>>
>>
>> --
>> Date: Tue, 3 Feb 2009 15:39:43 +1100
>> Subject: Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it be
>> acceptable?
>> From: lovingprin...@gmail.com
>> To: kapilatr...@hotmail.com
>> CC: anthony.ye...@gmail.com; ccie_voice@onlinestudylist.com;
>> gree...@googlemail.com; christian.hennr...@intact-is.com;
>> anil...@yahoo.com
>>
>>
>> Kapil,
>>
>>  If you dial your first AC pilot # , you should hear greeting .If you dial
>> second(dummy) AC pilot # , you should hear user busy.Now, When you link 2nd
>> to first,i.e add 2nd AC pilot # as Always Route Member , after hold time
>> expires, call will be routed to dummy pilot point and you will get 'user
>> busy'.I did also change Service Parameter for TCD so that AC can route calls
>> to directory numbers with unknown state.
>>
>> Regds
>> On Mon, Feb 2, 2009 at 9:25 PM, Kapil Atrish wrote:
>>
>>  Hi Kamal,
>>
>> I created additional AC Pilot with queuing disabled and pointed first one
>> to the new AC as "Alwasy Route Member". I keep on getting the MOH from first
>> AC even though queuing timer is over. Can you pl comment if you achieved it
>> differently?
>>
>> I am able to route the call to a CTI_RP as "Alwasy Route Member" and point
>> this RP to a route-pattern which further points it to the Gateway. The RP
>> string is invalid and non-routable by the GW. Using this method, the caller
>> simply gets dropped after queuing timer is over. No Fast-busy to caller but
>> MOH gets played.
>>
>> When I try pointing AC "Always Route Member" filed to any Route-pattern
>> directly, I get the following message:
>>
>> The Directory Number you entered in the selected Partition is associated
>> with a device that can not be a member of a Hunt Group.
>>
>>
>> Pl let me know how you achieved Anthony's method?
>>
>>
>> --
>>
>> Date: Thu, 29 Jan 2009 18:05:31 +1100
>> Subject: Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it be
>> acceptable?
>> From: lovingprin...@gmail.com
>> To: anthony.ye...@gmail.com
>> CC: kapilatr...@hotmail.com; ccie_voice@onlinestudylist.com;
>> gree...@googlemail.com; christian.hennr...@intact-is.com;
>> anil...@yahoo.com
>>
>>
>> I tested it and it works great.Thanks Anthony for kind help.
>>
>>
>> On Thu, Jan 29, 2009 at 3:52 PM, Anthony Yeung 
>> wrote:
>>
>> What you can try is assign a dummy AC pilot point to the original AC
>> Pilot Point as the 'Always Route Member' creating a linked hunt group.
>> Then for this second dummy AC pilot point assign a dummy AC user like
>> you did w/ the first. But instead, disable queuing for this second
>> dummy Pilot Point. After the hold time expires for the first AC pilot,
>> the call will be forwarded to the second AC pilot. Since queuing is
>> disabled, the call should drop BUT w/ a disconnect cause of 'user
>> busy'.
>>
>> On Wed, Jan 28, 2009 at 11:15 AM, Kapil Atrish 
>> wrote:
>> > I did not put the TP directly inside the Hunt-Group. I put a CTIRP as
>> > "Always Route Member" and on CTIRP I did a forward all to the TP.
>> >
>> > I am yet to try the solution given by Christian. I'll put the call to a
>> > gateway via RP and see if I can get fast-busy to the caller after
>> initial
>> > queuing prompt.
>> >
>> > 
>> > Date: Tue, 27 Jan 2009 21:30:58 +1100
>> > Subject: Re: [OSL | CCIE_Voice] Annunciator to PSTN - Will it be
>> acceptable?
>> > From: lovingprin...@gmail.com
>> > To: kapilatr...@hotmail.com
>> > CC: christian.hennr...@intact-is.com; gree...@googlemail.com;
>> > ccie_voice@onlinestudylist.com; anil...@yahoo.com
>> >
>> > I tried same way.It plays greeting only once.I also changed service
>> > parameter for Cisco TCD "Allow Routing with Unknown Line State" to True
>> ,and
>> > retried.Call still doesn't end.
>> >
>> > Kapil,
>> >  how did you add TP as member in HuntGroup.In my case, it gives error
>> saying
>> > that member should be a valid DN on system.I was able to add phone/CTIRP
>> DNs
>> > though.
>> >
>> > On Tue, Jan 27, 2009 at 8:48 PM, Kapil Atrish 
>> > wrote:
>> >
>> > I tried with RP/TP >> 

[OSL | CCIE_Voice] VPIM woes - troubleshooting

[Geochelone]

I've got VPIM configured and it works from Unity to CUE.  When i go from 
CUE to Unity it tells me "your message could not be delivered to 
extension 1001 at location 100, the recipient mailbox does not exist"


If i look at "trace networking vpim send" in CUE, I don't see any output 
when I try to send the message.  CUE config is as follows:


network location id 100
email domain unity.cisco.com
name "unity"
end location

network location id 300
email domain cue.cisco.com
name "CUE"
end location

network local location id 300



CUE can correctly resolve unity.cisco.com.  Are there any other 
troubleshooting steps I can look at?  i've looked around and some people 
have had to reinstall Unity Voice Connector, but the online lab racks 
that I use do not have the installation files.


TIA

[OSL | CCIE_Voice] Call Manager 4 Setup for Rack

[Alan Gardner]

Hi,

I am currently setting up my own rack for voice. Is there a doc that has the 
setup for the Call manager 4 servers.


Thanks

Alan Gardner

[OSL | CCIE_Voice] Dial Plan for Call Routing

[Zeeshan Nadeem]

Dear All,

I am using Proctor Lab remote sessions and have same PSTN phone which is
available on Proctor lab page.

IP Address for TFTP and CCM: *192.20.200.30*
MAC Address for your PSTN Loopback Adapter: *02004C4F4F0C


I want to know how many digits to make a call from HQ phone Local call, Long
distance Call to PSTN phone.

HQ phone 1001--- Local Call to the Pstn Phone 21 > working
HQ phone 1001---LD call to PSTN phone   617522 --> not working
I have another Route Pattern with 11 digits as well.

BR1 phone 2001 Local call to PSTN with 2811 voice gateway to PSTN
phone **617522
> working
**HQ phone 2001---LD call to PSTN phone   **21** --> not working*
*
Zeeshan
*

[OSL | CCIE_Voice] files for fax in br1 flash

[omar itani]

what is the command to see all files need for fax  that reisde in flash of  the 
br1 router 
 
thanks
_
News, entertainment and everything you care about at Live.com. Get it now!
http://www.live.com/getstarted.aspx

Re: [OSL | CCIE_Voice] mac address of mtp

[Ryan Trauernicht]

"show int faX/X"

On Tue, Feb 3, 2009 at 7:58 AM, omar itani  wrote:

>  hi guys
> 1-how to find the mac address of fastethernet mtp..?
>
>
>
>
>
> --
> See all the ways you can stay connected to friends and 
> family
>

[OSL | CCIE_Voice] mac address of mtp

[omar itani]

hi guys 
1-how to find the mac address of fastethernet mtp..?
 
 
 

_
Show them the way! Add maps and directions to your party invites. 
http://www.microsoft.com/windows/windowslive/events.aspx