Re: [OSL | CCIE_Voice] CUE integration with CME
load ILT Lab 1 and you will have FTP on .5 and then you can download the lic file. On Sun, Feb 21, 2010 at 1:20 AM, akash patel wrote: > I am on lab 11A. The CUE has license for CCm and I am trying to install > CME license. I understand to run following command > software install clean url ftp:// > > But I do not see 10.10.210.5 is set up as ftp server or has .pkg file. can > anyone guide me how to get around this? I am going to try from my PC next > time if can't get it done today. > > thank you > > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] LAB 3A initial config problems
I was on pod 15 Randall -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccie_voice-requ...@onlinestudylist.com Sent: Saturday, February 20, 2010 9:00 AM To: ccie_voice@onlinestudylist.com Subject: CCIE_Voice Digest, Vol 48, Issue 115 Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than "Re: Contents of CCIE_Voice digest..." Today's Topics: 1. VOL2 LAB 6 (kavi ten) 2. VOL2 LAB 6 UCME with UC (kavi ten) -- Message: 1 Date: Sat, 20 Feb 2010 18:55:30 +0400 From: kavi ten Subject: [OSL | CCIE_Voice] VOL2 LAB 6 To: ccie_voice@onlinestudylist.com Message-ID: <2115142c1002200655v44a9349ak12f9e2ab1058...@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" Hi Guys, I got stuck at the Teho dialing Question 4.5 I have the CME dial-peer configured & it works fine as the call to HQ/BR1 hits the GK I also have the translation pattern configured to match the incoming call same as in the PG 1#39001972XXXFOR 330 with called no xformation Still the call is not going to the BR1 gw & same the case with HQ calls The call then dial from BR2 PRI as per the preference. I can not understand how this should work as I have all parameter configured. Can some one guide me through how to go about this. Thanks. -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100220/28296b94/attachment-0001.htm -- Message: 2 Date: Sat, 20 Feb 2010 19:58:10 +0400 From: kavi ten Subject: [OSL | CCIE_Voice] VOL2 LAB 6 UCME with UC To: ccie_voice@onlinestudylist.com Message-ID: <2115142c1002200758j17a99b37t604b6ccdec7b8...@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" Hi Guys, When have the done the configuration as per the Guide, but the BR2 Phn1 phone on busy /noan , the incoming call gets disconnected. I checked the debug voice ccapi inout , which says disconnect cause of 19 , means no answer from the UC. Has any one come across this problem. Thanks -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100220/73fa1cc5/attachment-0001.htm -- ___ CCIE_Voice mailing list CCIE_Voice@onlinestudylist.com http://onlinestudylist.com/mailman/listinfo/ccie_voice End of CCIE_Voice Digest, Vol 48, Issue 115 *** ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] LAB 3A intital config issues
HI, I have been racking my brain for a while now and give up. I loaded the lab 3A initial config and it was missing OSPF config, VLAN and interace configuration...And I am not sure what else. I reverted the pod twice and added some config in but I am still not able to register my phone and http to the router for GUI access. The problem this is causing me is access from my PC so I can register my phone on my laptop. Can someone look into this as why the config is missing so much? Thanks, Randall From: ccie_voice-boun...@onlinestudylist.com [ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccie_voice-requ...@onlinestudylist.com [ccie_voice-requ...@onlinestudylist.com] Sent: Saturday, February 20, 2010 9:00 AM To: ccie_voice@onlinestudylist.com Subject: CCIE_Voice Digest, Vol 48, Issue 115 Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than "Re: Contents of CCIE_Voice digest..." Today's Topics: 1. VOL2 LAB 6 (kavi ten) 2. VOL2 LAB 6 UCME with UC (kavi ten) -- Message: 1 Date: Sat, 20 Feb 2010 18:55:30 +0400 From: kavi ten Subject: [OSL | CCIE_Voice] VOL2 LAB 6 To: ccie_voice@onlinestudylist.com Message-ID: <2115142c1002200655v44a9349ak12f9e2ab1058...@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" Hi Guys, I got stuck at the Teho dialing Question 4.5 I have the CME dial-peer configured & it works fine as the call to HQ/BR1 hits the GK I also have the translation pattern configured to match the incoming call same as in the PG 1#39001972XXXFOR 330 with called no xformation Still the call is not going to the BR1 gw & same the case with HQ calls The call then dial from BR2 PRI as per the preference. I can not understand how this should work as I have all parameter configured. Can some one guide me through how to go about this. Thanks. -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100220/28296b94/attachment-0001.htm -- Message: 2 Date: Sat, 20 Feb 2010 19:58:10 +0400 From: kavi ten Subject: [OSL | CCIE_Voice] VOL2 LAB 6 UCME with UC To: ccie_voice@onlinestudylist.com Message-ID: <2115142c1002200758j17a99b37t604b6ccdec7b8...@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" Hi Guys, When have the done the configuration as per the Guide, but the BR2 Phn1 phone on busy /noan , the incoming call gets disconnected. I checked the debug voice ccapi inout , which says disconnect cause of 19 , means no answer from the UC. Has any one come across this problem. Thanks -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100220/73fa1cc5/attachment-0001.htm -- ___ CCIE_Voice mailing list CCIE_Voice@onlinestudylist.com http://onlinestudylist.com/mailman/listinfo/ccie_voice End of CCIE_Voice Digest, Vol 48, Issue 115 *** ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] CUC Not Licensed For VPIM
When I attempt to add a VPIM location is Unity Connection I receive the following license error. Are the proctorlabs servers not licensed for VPIM? Anyone attempt VPIM in these labs yet? Status The requested operation would result in a license violation. Unable to create VPIM Location Save New VPIM Location Display Name* Dtmf Access ID* Partition cuc7-pub Partition Domain Name* IP Address* Remote phone prefix Save Fields marked with an asterisk (*) are required. The Demo license info show nothing for VPIM: SERVER this_host ANY VENDOR cisco INCREMENT LicVoicePortsMax cisco 7.0 permanent 2 HOSTID=ANY \ NOTICE="FOR_DEMO_ONLY.lic0 \ dummyPak" SIGN=A3DF5BBED8B0 INCREMENT LicSubscribersMax cisco 7.0 permanent 10 HOSTID=ANY \ NOTICE="FOR_DEMO_ONLY.lic1 \ dummyPak" SIGN=FA226A483396 INCREMENT LicVMISubscribersMax cisco 7.0 permanent 10 HOSTID=ANY \ NOTICE="FOR_DEMO_ONLY.lic2 \ dummyPak" SIGN=22D6A4F63854 INCREMENT LicAdvancedUserMax cisco 7.0 permanent 10 HOSTID=ANY \ NOTICE="FOR_DEMO_ONLY.lic3 \ dummyPak" SIGN=85B5BD2CDF32 INCREMENT LicRealspeakSessionsMax cisco 7.0 permanent 2 HOSTID=ANY \ NOTICE="FOR_DEMO_ONLY.lic4 \ dummyPak" SIGN=24848F662AEC INCREMENT LicServerBackend cisco 7.0 permanent 1 HOSTID=ANY \ NOTICE="FOR_DEMO_ONLY.lic5 \ dummyPak" SIGN=6750CF4C26B4 INCREMENT LicIMAPSubscribersMax cisco 7.0 permanent 10 HOSTID=ANY \ NOTICE="FOR_DEMO_ONLY.lic6 \ dummyPak" SIGN=0A5E3C90C67A INCREMENT LicUnityVoiceRecSessionsMax cisco 7.0 permanent 2 \ HOSTID=ANY \ NOTICE="FOR_DEMO_ONLY.lic7 \ dummyPak" SIGN=12E962E6B592 INCREMENT LicServerVoiceRec cisco 7.0 permanent 1 HOSTID=ANY \ NOTICE="FOR_DEMO_ONLY.lic8 \ dummyPak" SIGN=5C6FF1C641AE INCREMENT LicMaxMsgRecLenIsLicensed cisco 7.0 permanent 1 HOSTID=ANY \ NOTICE="FOR_DEMO_ONLY.lic9 \ dummyPak" SIGN=573BA6B413B6 INCREMENT LicRegionIsUnrestricted cisco 7.0 permanent 1 HOSTID=ANY \ NOTICE="FOR_DEMO_ONLY.lic10 \ dummyPak" SIGN=40EBACAE87D8 _ Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. http://clk.atdmt.com/GBL/go/201469229/direct/01/___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Barge
Hello, working on Volume 1 lab 8 IOS conference has been cnfigured on hq router when i tried with question 8.1 i used hq phones as bri phone of the question and vice versa on pressing the button on br1 phone 2 when in In Use Remote, i still see the barge softkey and it gives the message No Conference Bridge CBarge was enabled on the service parameter Below is a proof the conference bridge on the hq router is working HQ-RTR#sh sccp connections sess_idconn_idstype mode codec ripaddr rport sport 33557433 33554446 conf sendrecv g729b 192.168.3.1616386 16524 33557433 3355 conf sendrecv g729b 192.168.3.1218674 17838 33557433 33554442 conf sendrecv g711u 192.168.3.1828554 18950 Any ideas on what the issue is ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] CUE integration with CME
I am on lab 11A. The CUE has license for CCm and I am trying to install CME license. I understand to run following command software install clean url ftp:// But I do not see 10.10.210.5 is set up as ftp server or has .pkg file. can anyone guide me how to get around this? I am going to try from my PC next time if can't get it done today. thank you___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] VOL2 LAB 6 UCME with UC
Hi Guys, When have the done the configuration as per the Guide, but the BR2 Phn1 phone on busy /noan , the incoming call gets disconnected. I checked the debug voice ccapi inout , which says disconnect cause of 19 , means no answer from the UC. Has any one come across this problem. Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] VOL2 LAB 6
Hi Guys, I got stuck at the Teho dialing Question 4.5 I have the CME dial-peer configured & it works fine as the call to HQ/BR1 hits the GK I also have the translation pattern configured to match the incoming call same as in the PG 1#39001972XXXFOR 330 with called no xformation Still the call is not going to the BR1 gw & same the case with HQ calls The call then dial from BR2 PRI as per the preference. I can not understand how this should work as I have all parameter configured. Can some one guide me through how to go about this. Thanks. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Is VLT available in the lab
Hi Guys, In the actual LAB do we have access to the VLT ?? thanks -- Ravindra Lakpriya +94 773 532 094 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com