Re: [OSL | CCIE_Voice] 7961 Factory Reset now Stuck in Upgrading

[CCIETalk.com]

Nope. Plugged into my HQ-SW so kinda crazy what's going on. It is NOT
actively pulling data. Its been sitting at the initial UPGRADING screen for
couple of hours now

On Sat, Feb 27, 2010 at 7:55 PM, Jeff Garvas  wrote:

> Is it actively pulling data?  Is it sitting across a F/R link that you may
> have shaped or QoS'd down to 56k?
>
> On Sat, Feb 27, 2010 at 7:18 PM, CCIETalk.com  wrote:
>
>> I just went ahead and factory reset one of my 7961s and now it is stuck in
>> UPGRADING and shows the mac on the screen. I enabled auto-reg on CUCM and
>> the phone is configured in the correct vlan and it has been sitting like
>> this for 30min now.
>>
>> HQ-3750#sh cdp nei fa1/0/4 detail
>> -
>> Device ID: SEP0019305E0A37
>> Entry address(es):
>> Platform: Cisco IP Phone 7961,  Capabilities: Host Phone
>> Interface: FastEthernet1/0/4,  Port ID (outgoing port): Port 1
>> Holdtime : 167 sec
>>
>> Version :
>> 79XX_default_load
>>
>> advertisement version: 2
>> Duplex: full
>> Power drawn: 6.300 Watts
>> Power request id: 2615, Power management id: 0
>> Power request levels are:6300 0 0 0 0
>> Management address(es):
>>
>> It can't be normal..
>>
>> --
>> www.ccietalk.com
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>>
>


-- 
www.ccietalk.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] 7961 Factory Reset now Stuck in Upgrading

[Jeff Garvas]

Is it actively pulling data?  Is it sitting across a F/R link that you may
have shaped or QoS'd down to 56k?

On Sat, Feb 27, 2010 at 7:18 PM, CCIETalk.com  wrote:

> I just went ahead and factory reset one of my 7961s and now it is stuck in
> UPGRADING and shows the mac on the screen. I enabled auto-reg on CUCM and
> the phone is configured in the correct vlan and it has been sitting like
> this for 30min now.
>
> HQ-3750#sh cdp nei fa1/0/4 detail
> -
> Device ID: SEP0019305E0A37
> Entry address(es):
> Platform: Cisco IP Phone 7961,  Capabilities: Host Phone
> Interface: FastEthernet1/0/4,  Port ID (outgoing port): Port 1
> Holdtime : 167 sec
>
> Version :
> 79XX_default_load
>
> advertisement version: 2
> Duplex: full
> Power drawn: 6.300 Watts
> Power request id: 2615, Power management id: 0
> Power request levels are:6300 0 0 0 0
> Management address(es):
>
> It can't be normal..
>
> --
> www.ccietalk.com
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] 7961 Factory Reset now Stuck in Upgrading

[CCIETalk.com]

I just went ahead and factory reset one of my 7961s and now it is stuck in
UPGRADING and shows the mac on the screen. I enabled auto-reg on CUCM and
the phone is configured in the correct vlan and it has been sitting like
this for 30min now.

HQ-3750#sh cdp nei fa1/0/4 detail
-
Device ID: SEP0019305E0A37
Entry address(es):
Platform: Cisco IP Phone 7961,  Capabilities: Host Phone
Interface: FastEthernet1/0/4,  Port ID (outgoing port): Port 1
Holdtime : 167 sec

Version :
79XX_default_load

advertisement version: 2
Duplex: full
Power drawn: 6.300 Watts
Power request id: 2615, Power management id: 0
Power request levels are:6300 0 0 0 0
Management address(es):

It can't be normal..

-- 
www.ccietalk.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] SIP & SK phones show different time in CME

[Pavan K]

I am running 8.3.2.27 on the SK phones. IOS is 12.4(20)T2 and CME 7.0(0)
The SK phone seems to be showing incorrect time.
Has anybody seen this before ?

-Pavan


===
voice register global
 mode cme
 source-address 142.103.66.254 port 5060
 max-dn 10
 max-pool 2
 load 7961GE term61.default
 load 7961 term61.default
 authenticate register
 timezone 43
 time-format 24
 tftp-path flash:
 create profile sync 0007641738744237
 ntp-server 142.3.64.254 mode anycast
==
ntp server 142.3.64.254
telephony-service
 load 7970 term70.default
 load 7971 term71.default
 max-ephones 2
 max-dn 10 no-reg
 ip source-address 142.103.66.254 port 2000
 system message Your current Options
 time-zone 43
 time-format 24
 max-conferences 12 gain -6
 transfer-system full-consult
 create cnf-files version-stamp 7960 Feb 27 2010 22:28:52
===
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] bacd issue

[Otto Sanchez]

Please remove "h225 listen-port 1820" from your configuration, call is being
sent (from dial peer 222) as a h.323 call with tcp port 1720 (default),
received on the loopback address with the same port and you are telling the
gw to listen on port 1820. Removing this will configure the gw to listen on
port 1720 and you call will go through,

hth,

On Sat, Feb 27, 2010 at 3:33 PM, Omotayo  wrote:

> Hello,
>
> Still on the BACD, when i dial 32143007 from PSTN or 3007 for internal
> phones. i get the Unknown number tone
> Kindly help check the config and see whatz missing
> thanks
>
>
> BR2-RTR#sh run
> Building configuration...
>
> Current configuration : 8096 bytes
> !
> ! No configuration change since last restart
> !
> version 12.4
> service timestamps debug datetime msec
> service timestamps log datetime msec
> no service password-encryption
> !
> hostname BR2-RTR
> !
> boot-start-marker
> warm-reboot
> boot-end-marker
> !
> logging message-counter syslog
> logging buffered 4096
> !
> no aaa new-model
> memory-size iomem 20
> clock timezone hkt 8
> network-clock-participate wic 0
> no network-clock-participate wic 1
> !
> dot11 syslog
> ip source-route
> !
> !
> ip cef
> ip dhcp excluded-address 10.10.202.1 10.10.202.9
> ip dhcp excluded-address 10.10.202.31 10.10.202.254
> !
> ip dhcp pool SiteC
>network 10.10.202.0 255.255.255.0
>default-router 10.10.202.1
>option 150 ip 10.10.202.1
> !
> !
> no ip domain lookup
> no ipv6 cef
> !
> multilink bundle-name authenticated
> !
> !
> isdn switch-type primary-net5
> !
> !
> !
> voice service voip
>  allow-connections h323 to h323
>  allow-connections h323 to sip
>  allow-connections sip to h323
>  allow-connections sip to sip
>  h323
>   h225 listen-port 1820
>   no call service stop
>  sip
>   bind control source-interface Loopback0
>   bind media source-interface Loopback0
>   registrar server expires max 300 min 60
> !
> !
> !
> voice class codec 1
>  codec preference 1 g729r8 bytes 20
>  codec preference 2 g711ulaw bytes 160
> !
> !
> !
> voice class h323 1
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> voice register global
>  mode cme
>  source-address 10.10.110.3 port 5060
>  max-dn 3
>  max-pool 3
>  authenticate register
>  voicemail 3600
>  tftp-path flash:
>  ntp-server 10.10.100.2 mode unicast
> !
> voice register dn  1
>  number 3004
>  call-forward b2bua busy 3600
>  call-forward b2bua mailbox 3004
>  call-forward b2bua noan 360 timeout 15
>  name SiteB Phone 4
>  no-reg
>  label SiteC Phone 4
>  mwi
> !
> voice register pool  1
>  id mac ..
>  type 7960
>  number 1 dn 1
>  dtmf-relay rtp-nte
>  username 3004 password cisco
>  codec g711ulaw
>  no vad
> !
> voice hunt-group 1 parallel
>  list 3002,3006
>  pilot 3210
> !
> !
> !
> voice translation-rule 1
>  rule 1 /3432143/ /3/
>  rule 2 /32143/ /3/
>  rule 3 /\+3432143/ /3/
> !
> voice translation-rule 2
>  rule 1 /^\(3...\)$/ /+343214\1/
> !
> !
> voice translation-profile IN
>  translate called 1
> !
> voice translation-profile OUT
>  translate calling 2
> !
> !
> voice-card 0
>  no dspfarm
>  dsp services dspfarm
> !
> !
> application
>   service queue flash:bacdprompts/app-b-acd-2.1.2.2.tcl
>   param queue-len 15
>   param aa-hunt3 3002
>   param queue-manager-debugs 1
>   param aa-hunt2 3210
>   param number-of-hunt-grps 2
>   !
>   service aa flash:bacdprompts/app-b-acd-aa-2.1.2.2.tcl
>   paramspace english index 1
>   param number-of-hunt-grps 2
>   param handoff-string aa
>   param dial-by-extension-option 3
>   paramspace english language en
>   param max-time-vm-retry 2
>   param aa-pilot 3007
>   paramspace english location flash:bacdprompts/
>   param second-greeting-time 60
>   param welcome-prompt _bacd_welcome.au
>   param call-retry-timer 15
>   param voice-mail 3600
>   param max-time-call-retry 700
>   param service-name queue
>   !
> !
> !
> !
> !
> !
> archive
>  log config
>   hidekeys
> !
> !
> !
> !
> !
> controller E1 0/0/0
>  pri-group timeslots 1-3,16
> !
> controller T1 0/1/0
>  framing esf
>  linecode b8zs
>  channel-group 0 timeslots 1-24
> !
> !
> !
> !
> !
> interface Loopback0
>  ip address 10.10.110.3 255.255.255.255
>  ip ospf network point-to-point
>  h323-gateway voip interface
>  h323-gateway voip id PL ipaddr 10.10.110.1 1719
>  h323-gateway voip h323-id BR2-RTR
>  h323-gateway voip tech-prefix 3
> !
> interface FastEthernet0/0
>  no ip address
>  shutdown
>  duplex auto
>  speed auto
> !
> interface Service-Engine0/0
>  ip unnumbered Vlan400
>  service-module ip address 10.10.202.2 255.255.255.0
>  service-module ip default-gateway 10.10.202.1
> !
> interface FastEthernet0/1
>  no ip address
>  shutdown
>  duplex auto
>  speed auto
> !
> interface FastEthernet0/3/0
>  switchport trunk native vlan 200
>  switchport mode trunk
>  switchport voice vlan 400
> !
> interface FastEthernet0/3/1
>  switchport trunk native vlan 200
>  switchport mode trunk
>  switchport voice vlan 400
> !
> interface FastEthernet0/3/2
>  shutdown
> !
> interface Fas

[OSL | CCIE_Voice] MWI not working

[Mike Brooks]

For some reason I can not get my MWI to work on Proctorlabs.

Perhaps I am missing something.

One thing I noticed is port group under servers when I do the ping tests I
cannot ping Callmanager but if I put the default gateway as 1 of the servers
and do the ping test it works fine.

IP Address  10.10.210.10 (pub)
Response Time Timed Out

IP Address  10.10.210.11 (sub)
Response Time Timed Out

IP Address  10.10.210.1  (default gateway - hq-rtr)
Response Time 3  <<
>From Unity CLI i can ping the callmanagers without issues..

admin:utils netw
admin:utils network ping 10.10.210.10
PING 10.10.210.10 (10.10.210.10) 56(84) bytes of data.
64 bytes from 10.10.210.10: icmp_seq=0 ttl=64 time=1.69 ms
64 bytes from 10.10.210.10: icmp_seq=1 ttl=64 time=0.324 ms
64 bytes from 10.10.210.10: icmp_seq=2 ttl=64 time=0.303 ms
64 bytes from 10.10.210.10: icmp_seq=3 ttl=64 time=0.325 ms
--- 10.10.210.10 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3223ms
rtt min/avg/max/mdev = 0.303/0.662/1.698/0.598 ms, pipe 2

admin:utils network ping 10.10.210.11
PING 10.10.210.11 (10.10.210.11) 56(84) bytes of data.
64 bytes from 10.10.210.11: icmp_seq=0 ttl=64 time=0.474 ms
64 bytes from 10.10.210.11: icmp_seq=1 ttl=64 time=0.374 ms
64 bytes from 10.10.210.11: icmp_seq=2 ttl=64 time=0.290 ms
64 bytes from 10.10.210.11: icmp_seq=3 ttl=64 time=0.380 ms
--- 10.10.210.11 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3007ms
rtt min/avg/max/mdev = 0.290/0.379/0.474/0.067 ms, pipe 2

I have tried rebooting Unity.

I feel its just something to do with the vmware set up.  As anyone else had
this problem.

Regards,

Mike Brooks
CCIE# 16027(R&S)
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] gatekeeper call to cme

[Omotayo]

Hello,

working on Vol 1 lab 4

Calls from hq and Bri to br2 works with all sccp phones
with sip phone( i used xlite) at br2

when the sip phone calls hq/br1

Calls continues to ring on the sip phone while it disconnects on hq/br1
phone


when Hq/br1 calls sip phone

it rings on the sipphones but as soon as the sip phone picjs it gives a busy
tone on hq/br1 phone


When i uncheck the Enable Inbound faststart

Calls from sip to hq/br1 disconnects after 10sec of connection

calls from hq/br1 to sip disconnects afters 2 secs of connection

i have transcoder on hq phones and the trunk

the trunk has a device pools that does g729r8 to all regions

Below is the configuration on the hq gateway and br2 gateway

Q-RTR(config)#do sh run
Building configuration...

Current configuration : 4210 bytes
!
! Last configuration change at 09:40:44 pst Sat Feb 27 2010
! NVRAM config last updated at 12:25:10 pst Sat Feb 27 2010
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname HQ-RTR
!
boot-start-marker
warm-reboot
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
memory-size iomem 20
clock timezone pst -8
network-clock-participate wic 0
network-clock-select 1 T1 0/0/0
dot11 syslog
no ip source-route
!
!
ip cef
!
!
no ip domain lookup
!
multilink bundle-name authenticated
!
isdn switch-type primary-ni
!
voice-card 0
 no dspfarm
 dsp services dspfarm
!
!
!
voice service voip
 allow-connections h323 to h323
 allow-connections h323 to sip
 allow-connections sip to h323
 allow-connections sip to sip
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
vtp domain home.com
vtp mode transparent
archive
 log config
  hidekeys
!
!
!
!
controller T1 0/0/0
 framing esf
 linecode ami
 pri-group timeslots 1-3,24 service mgcp
!
controller T1 0/0/1
 framing esf
 linecode b8zs
 channel-group 0 timeslots 1-24
!
!
!
!
!
interface Loopback0
 ip address 10.10.110.1 255.255.255.255
!
interface FastEthernet0/0
 no ip address
 duplex full
 speed 100
 ip rsvp bandwidth
!
interface FastEthernet0/0.10
 encapsulation dot1Q 10 native
 ip address 10.10.100.1 255.255.255.0
!
interface FastEthernet0/0.20
 encapsulation dot1Q 20
 ip address 10.10.200.3 255.255.255.0
!
interface FastEthernet0/0.30
 encapsulation dot1Q 30
 ip address 10.10.210.1 255.255.255.0
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial0/0/0:23
 no ip address
 encapsulation hdlc
 isdn switch-type primary-ni
 isdn incoming-voice voice
 isdn bind-l3 ccm-manager
 no cdp enable
!
interface Serial0/0/1:0
 no ip address
 encapsulation frame-relay
 fair-queue 64 256 36
 frame-relay lmi-type ansi
 ip rsvp bandwidth
!
interface Serial0/0/1:0.1 point-to-point
 ip address 10.10.111.1 255.255.255.0
 ip ospf mtu-ignore
 snmp trap link-status
 frame-relay interface-dlci 201
 ip rsvp bandwidth 64
!
interface Serial0/0/1:0.2 point-to-point
 ip address 10.10.112.1 255.255.255.0
 ip ospf mtu-ignore
 snmp trap link-status
 frame-relay interface-dlci 202
!
router ospf 1
 router-id 10.10.100.1
 log-adjacency-changes
 network 10.10.0.0 0.0.255.255 area 0
!
ip forward-protocol nd
!
!
ip http server
no ip http secure-server
!
!
!
!
!
!
!
control-plane
!
rmon event 3 log trap AutoQoS description "AutoQoS SNMP traps for Voice
Drops" owner AutoQoS
!
!
voice-port 0/0/0:23
!
ccm-manager switchback immediate
ccm-manager fallback-mgcp
ccm-manager redundant-host 10.10.210.10
ccm-manager mgcp
!
mgcp
mgcp call-agent 10.10.210.11 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp bind control source-interface FastEthernet0/0.20
mgcp bind media source-interface FastEthernet0/0.20
!
mgcp profile default
!
sccp local FastEthernet0/0.20
sccp ccm 10.10.210.11 identifier 1 version 5.0.1
sccp ccm 10.10.210.10 identifier 2 version 5.0.1
sccp
!
sccp ccm group 1
 bind interface FastEthernet0/0.20
 associate ccm 1 priority 1
 associate ccm 2 priority 2
 associate profile 2 register hq-transcode
 associate profile 1 register hq-mtp
!
dspfarm profile 2 transcode
 codec g711ulaw
 codec g711alaw
 codec g729ar8
 codec g729abr8
 codec g729r8
 maximum sessions 2
 associate application SCCP
!
dspfarm profile 1 mtp
 codec g729r8
 codec pass-through
 rsvp
 maximum sessions software 2
 associate application SCCP
!
!
!
!
!
gatekeeper
 zone local PL ipexpert.com
 zone prefix PL 1... gw-priority 10 gk-trunk_2
 zone prefix PL 1... gw-priority 9 gk-trunk_1
 zone prefix PL 5... gw-priority 10 gk-trunk_2
 zone prefix PL 5... gw-priority 9 gk-trunk_1
 no shutdown
!
!
line con 0
 exec-timeout 0 0
 logging synchronous
line aux 0
line vty 0 4
 exec-timeout 0 0
 privilege level 15
 logging synchronous
 no login
 length 0
 transport preferred none
 transport input telnet
line vty 5 15
 exec-timeout 0 0
 privilege level 15
 logging synchronous
 no login
 transport preferred none
 transport input telnet
!
scheduler allocate 2 1000
ntp clock-period 17179862
ntp server 10.10.100.2
!
end
HQ-

[OSL | CCIE_Voice] bacd issue

[Omotayo]

Hello,

Still on the BACD, when i dial 32143007 from PSTN or 3007 for internal
phones. i get the Unknown number tone
Kindly help check the config and see whatz missing
thanks


BR2-RTR#sh run
Building configuration...

Current configuration : 8096 bytes
!
! No configuration change since last restart
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname BR2-RTR
!
boot-start-marker
warm-reboot
boot-end-marker
!
logging message-counter syslog
logging buffered 4096
!
no aaa new-model
memory-size iomem 20
clock timezone hkt 8
network-clock-participate wic 0
no network-clock-participate wic 1
!
dot11 syslog
ip source-route
!
!
ip cef
ip dhcp excluded-address 10.10.202.1 10.10.202.9
ip dhcp excluded-address 10.10.202.31 10.10.202.254
!
ip dhcp pool SiteC
   network 10.10.202.0 255.255.255.0
   default-router 10.10.202.1
   option 150 ip 10.10.202.1
!
!
no ip domain lookup
no ipv6 cef
!
multilink bundle-name authenticated
!
!
isdn switch-type primary-net5
!
!
!
voice service voip
 allow-connections h323 to h323
 allow-connections h323 to sip
 allow-connections sip to h323
 allow-connections sip to sip
 h323
  h225 listen-port 1820
  no call service stop
 sip
  bind control source-interface Loopback0
  bind media source-interface Loopback0
  registrar server expires max 300 min 60
!
!
!
voice class codec 1
 codec preference 1 g729r8 bytes 20
 codec preference 2 g711ulaw bytes 160
!
!
!
voice class h323 1
!
!
!
!
!
!
!
!
!
!
voice register global
 mode cme
 source-address 10.10.110.3 port 5060
 max-dn 3
 max-pool 3
 authenticate register
 voicemail 3600
 tftp-path flash:
 ntp-server 10.10.100.2 mode unicast
!
voice register dn  1
 number 3004
 call-forward b2bua busy 3600
 call-forward b2bua mailbox 3004
 call-forward b2bua noan 360 timeout 15
 name SiteB Phone 4
 no-reg
 label SiteC Phone 4
 mwi
!
voice register pool  1
 id mac ..
 type 7960
 number 1 dn 1
 dtmf-relay rtp-nte
 username 3004 password cisco
 codec g711ulaw
 no vad
!
voice hunt-group 1 parallel
 list 3002,3006
 pilot 3210
!
!
!
voice translation-rule 1
 rule 1 /3432143/ /3/
 rule 2 /32143/ /3/
 rule 3 /\+3432143/ /3/
!
voice translation-rule 2
 rule 1 /^\(3...\)$/ /+343214\1/
!
!
voice translation-profile IN
 translate called 1
!
voice translation-profile OUT
 translate calling 2
!
!
voice-card 0
 no dspfarm
 dsp services dspfarm
!
!
application
  service queue flash:bacdprompts/app-b-acd-2.1.2.2.tcl
  param queue-len 15
  param aa-hunt3 3002
  param queue-manager-debugs 1
  param aa-hunt2 3210
  param number-of-hunt-grps 2
  !
  service aa flash:bacdprompts/app-b-acd-aa-2.1.2.2.tcl
  paramspace english index 1
  param number-of-hunt-grps 2
  param handoff-string aa
  param dial-by-extension-option 3
  paramspace english language en
  param max-time-vm-retry 2
  param aa-pilot 3007
  paramspace english location flash:bacdprompts/
  param second-greeting-time 60
  param welcome-prompt _bacd_welcome.au
  param call-retry-timer 15
  param voice-mail 3600
  param max-time-call-retry 700
  param service-name queue
  !
!
!
!
!
!
archive
 log config
  hidekeys
!
!
!
!
!
controller E1 0/0/0
 pri-group timeslots 1-3,16
!
controller T1 0/1/0
 framing esf
 linecode b8zs
 channel-group 0 timeslots 1-24
!
!
!
!
!
interface Loopback0
 ip address 10.10.110.3 255.255.255.255
 ip ospf network point-to-point
 h323-gateway voip interface
 h323-gateway voip id PL ipaddr 10.10.110.1 1719
 h323-gateway voip h323-id BR2-RTR
 h323-gateway voip tech-prefix 3
!
interface FastEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Service-Engine0/0
 ip unnumbered Vlan400
 service-module ip address 10.10.202.2 255.255.255.0
 service-module ip default-gateway 10.10.202.1
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface FastEthernet0/3/0
 switchport trunk native vlan 200
 switchport mode trunk
 switchport voice vlan 400
!
interface FastEthernet0/3/1
 switchport trunk native vlan 200
 switchport mode trunk
 switchport voice vlan 400
!
interface FastEthernet0/3/2
 shutdown
!
interface FastEthernet0/3/3
 shutdown
!
interface Serial0/0/0:15
 no ip address
 encapsulation hdlc
 isdn switch-type primary-net5
 isdn incoming-voice voice
 isdn bchan-number-order ascending
 isdn outgoing display-ie
 no cdp enable
!
interface Serial0/1/0:0
 no ip address
 encapsulation frame-relay IETF
 frame-relay lmi-type ansi
!
interface Serial0/1/0:0.1 point-to-point
 ip address 10.10.112.2 255.255.255.0
 ip ospf mtu-ignore
 snmp trap link-status
 frame-relay interface-dlci 102
!
interface Vlan1
 no ip address
!
interface Vlan200
 ip address 10.10.102.1 255.255.255.0
!
interface Vlan400
 ip address 10.10.202.1 255.255.255.0
!
router ospf 1
 router-id 10.10.202.1
 log-adjacency-changes
 network 10.10.0.0 0.0.255.255 area 0
!
ip forward-protocol nd
ip route 10.10.202.2 255.255.255.255 Service-Engine0/0
ip http server
no ip http secure-server
ip http path flash

Re: [OSL | CCIE_Voice] Lab 4.4 Question

[Otto Sanchez]

Hi Randall,

In that case, 10 digits (2123942123) should be forwarded to the pstn,


On Thu, Feb 25, 2010 at 3:35 AM, Randall Crumm <
randall.cr...@harmonicinc.com> wrote:

> It looks like the requirement is to have OB call to 212 area code, the gw
> should fwd 10 digits(area code+7)
> If so then should it be forward digits 10 and not 7?
>
> Am I reading it wrong?
>
> Thanks,
> Randall
>
> -Original Message-
> From: ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] On Behalf Of
> ccie_voice-requ...@onlinestudylist.com
> Sent: Wednesday, February 24, 2010 6:27 PM
> To: ccie_voice@onlinestudylist.com
> Subject: CCIE_Voice Digest, Vol 48, Issue 152
>
> Send CCIE_Voice mailing list submissions to
>ccie_voice@onlinestudylist.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>http://onlinestudylist.com/mailman/listinfo/ccie_voice
> or, via email, send a message with subject or body 'help' to
>ccie_voice-requ...@onlinestudylist.com
>
> You can reach the person managing the list at
>ccie_voice-ow...@onlinestudylist.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of CCIE_Voice digest..."
>
>
> Today's Topics:
>
>   1. Re: SDI or CCM trace logs in CCM 7 (Tanner Ezell)
>   2. Re: SDI or CCM trace logs in CCM 7 (t n)
>   3. Re: + dialing (Otto Sanchez)
>   4. Display IE and MGCP interaction (t n)
>   5. Re: Display IE and MGCP interaction (t n)
>
>
> --
>
> Message: 1
> Date: Wed, 24 Feb 2010 17:02:42 -0500
> From: Tanner Ezell 
> Subject: Re: [OSL | CCIE_Voice] SDI or CCM trace logs in CCM 7
> To: t n 
> Cc: OSL Group 
> Message-ID:
><9c4f122d1002241402s50bd68b6mde142aa66b767...@mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Yea, RTMT pretty much sucks :)
>
> On Wed, Feb 24, 2010 at 4:59 PM, t n  wrote:
> > You can also from the shell:
> >
> > file list activelog /
> > file list activelog /cm/trace/ccm/sdi/
> > then file view
> > file view activelog /cm/trace/ccm/sdi/ccm0001.txt
> >
> >
> > RTMT is better although it can be much better.
> >
> >
> >
>
>
>
> --
> Regards,
> Tanner Ezell
>
>
> --
>
> Message: 2
> Date: Wed, 24 Feb 2010 17:16:49 -0500
> From: t n 
> Subject: Re: [OSL | CCIE_Voice] SDI or CCM trace logs in CCM 7
> To: Tanner Ezell 
> Cc: OSL Group 
> Message-ID:
>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Yup. :)
>
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/5_1_1/iptpappa.html#wp1009409
>
> admin:file search activelog cm/trace/ccm/sdi/ccm0004.txt
> 10\.10\.200\.254
>
> Searching path: /var/log/active/cm/trace/ccm/sdi/ccm0004.txt
> Searching file: /var/log/active/cm/trace/ccm/sdi/ccm0004.txt
> 02/10/2010 20:11:14.924 CCM|StationD:(002) DND settings from TSP:
> status=0, option=0,
>
> ringSetting=5|
> 02/10/2010 20:12:13.118 CCM|StationD:(003) DND settings from TSP:
> status=0, option=0,
>
> ringSetting=5|
>
> |
> 02/10/2010 20:14:52.557 CCM|ConnectionManager - wait_AuDisconnectRequest
> ERROR:NO ENTRY FOUND IN
>
> TABLE,CI(30237231,30237232),dcType=1,IFCreated(0,0),PID(0-0,0-0),IFHandling(0,0),MCNode(0,0)|
> 02/10/2010 20:14:52.558
> CCM|MatrixControl:updatePartyMediaCoordinatorNodeId:
> party1 videoCapable=0, party 2
>
> videocapable=0|
>
> |
> -- next part --
> An HTML attachment was scrubbed...
> URL:
> http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100224/6e86e814/attachment-0001.htm
>
> --
>
> Message: 3
> Date: Wed, 24 Feb 2010 19:52:43 -0430
> From: Otto Sanchez 
> Subject: Re: [OSL | CCIE_Voice] + dialing
> To: Cristobal Priego 
> Cc: ccie_voice@onlinestudylist.com
> Message-ID:
>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi Cris,
>
> Please try first to globalize the calling number (TP) and have that number
> on the phone display and call directories. When you are sure everything is
> working as desired, use the cg xform patterns as discussed before to
> localize the phone display, after that, you still should see the calling
> number's globalized form in the phone directories. Use the 7941s you have
> for testing this feature,
>
> Thanks,
>
> On Wed, Feb 24, 2010 at 3:53 PM, Cristobal Priego <
> cristobalpri...@gmail.com
> > wrote:
>
> > The issue was the predot
> >
> > i have a question now, when i call i see on the display 4 digits, and if
> i
> > don't answer the call i only see the 4 digits, what do i need to do to
> see
> > internal missed calls to display the globalized number?
> >
> > thanks
> >
> > 2010/2/23 Cristobal Priego 
> >
> > I didn't have the predot
> >> maybe that's why
> >> I'm using a couple of 7921's and 7941's and an IPC (i know this soft
> phone
> >> doesn't support the + dialing)
> >>
> >> 2010/2/22 Otto Sanchez 
> >>
> >> Hi Cris,
> >>>
> >>> Excelente!, e

[OSL | CCIE_Voice] Compression

[Jefferson Wilson]

Mark,

 

Are you compressing on both sides?

 

Maybe I didn't read that right in your post.

 

Jefferson

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] class based shaping and cRTP

[Mark Nigh]

I noticed when I remove the compress header ip rtp from the WAN-EDGE policy-map 
and place into the class class-default of the cbase-shaping policy-map, it 
works. Is this correct?

Mark Nigh
Systems Engineer
mn...@netelligent.com
 (p) 314.392.6926
[cid:image001.gif@01CAB7B1.D8E2B130]

From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Mark Nigh
Sent: Saturday, February 27, 2010 1:31 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] class based shaping and cRTP

Can anyone check out my configuration of class based shaping and class based 
cRTP. Seems that I can't get the compression to increment when I configure 
class based shaping. When I use MLPPP and cRTP, it increments.

Thanks for your assistance.

class-map match-any signal
 match ip dscp af31
 match ip dscp cs3  af31
class-map match-any voice
 match ip dscp ef
 match protocol rtp
!
!
policy-map WAN-EDGE
 class voice
priority percent 33
   compress header ip rtp
 class signal
priority percent 5
policy-map cbase-shaping
 class class-default
shape average 368400 3684 0
  service-policy WAN-EDGE

interface Serial0/0/0
 no ip address
 encapsulation frame-relay IETF
 ip ospf mtu-ignore
 frame-relay lmi-type ansi
!
interface Serial0/0/0.1 point-to-point
 ip address 10.6.255.254 255.255.255.252
 ip ospf mtu-ignore
 snmp trap link-status
 frame-relay interface-dlci 201
  class fr-map-class

map-class frame-relay fr-map-class
 frame-relay fragment 480
 frame-relay fair-queue
 service-policy output cbase-shaping

SHOW COMMOND

R2#sh policy-map int
 Serial0/0/0.1: DLCI 201 -

  Service-policy output: cbase-shaping

Class-map: class-default (match-any)
  11179 packets, 717408 bytes
  5 minute offered rate 25000 bps, drop rate 0 bps
  Match: any
  Queueing
  queue limit 64 packets
  (queue depth/total drops/no-buffer drops) 0/0/0
  (pkts output/bytes output) 11179/717408
  shape (average) cir 368400, bc 3684, be 0
  target shape rate 368400
lower bound cir 0,  adapt to fecn 0

  Service-policy : WAN-EDGE

queue stats for all priority classes:
  Queueing
  queue limit 64 packets
  (queue depth/total drops/no-buffer drops) 0/0/0
  (pkts output/bytes output) 11014/704896

Class-map: voice (match-any)
  11014 packets, 704896 bytes   ** These packets increment.
  5 minute offered rate 25000 bps, drop rate 0 bps
  Match: ip dscp ef (46)
1640 packets, 104960 bytes
5 minute rate 0 bps
  Match: protocol rtp
0 packets, 0 bytes
5 minute rate 0 bps
  Priority: 33% (121 kbps), burst bytes 3000, b/w exceed drops: 0

  compress:   * I get nothing on this.
  header ip rtp
  UDP/RTP (compression on, Cisco, RTP)
Sent:0 total, 0 compressed,
 0 bytes saved, 0 bytes sent
 rate 0 bps

Mark Nigh
Systems Engineer
mn...@netelligent.com
 (p) 314.392.6926
[cid:image001.gif@01CAB7B1.D8E2B130]



This transmission and any attached files are privileged, confidential or 
otherwise the exclusive property of the intended recipient or Netelligent 
Corporation. If you are not the intended recipient, any disclosure, copying, 
distribution or use of any of the information contained in or attached to this 
transmission is strictly prohibited. If you have received this transmission in 
error, please contact us immediately by responding to this message or by 
telephone (314-392-6900) and promptly destroy the original transmission and its 
attachments.


This transmission and any attached files are privileged, confidential or 
otherwise the exclusive property of the intended recipient or Netelligent 
Corporation. If you are not the intended recipient, any disclosure, copying, 
distribution or use of any of the information contained in or attached to this 
transmission is strictly prohibited. If you have received this transmission in 
error, please contact us immediately by responding to this message or by 
telephone (314-392-6900) and promptly destroy the original transmission and its 
attachments.
<>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] class based shaping and cRTP

[Mark Nigh]

Can anyone check out my configuration of class based shaping and class based 
cRTP. Seems that I can't get the compression to increment when I configure 
class based shaping. When I use MLPPP and cRTP, it increments.

Thanks for your assistance.

class-map match-any signal
 match ip dscp af31
 match ip dscp cs3  af31
class-map match-any voice
 match ip dscp ef
 match protocol rtp
!
!
policy-map WAN-EDGE
 class voice
priority percent 33
   compress header ip rtp
 class signal
priority percent 5
policy-map cbase-shaping
 class class-default
shape average 368400 3684 0
  service-policy WAN-EDGE

interface Serial0/0/0
 no ip address
 encapsulation frame-relay IETF
 ip ospf mtu-ignore
 frame-relay lmi-type ansi
!
interface Serial0/0/0.1 point-to-point
 ip address 10.6.255.254 255.255.255.252
 ip ospf mtu-ignore
 snmp trap link-status
 frame-relay interface-dlci 201
  class fr-map-class

map-class frame-relay fr-map-class
 frame-relay fragment 480
 frame-relay fair-queue
 service-policy output cbase-shaping

SHOW COMMOND

R2#sh policy-map int
 Serial0/0/0.1: DLCI 201 -

  Service-policy output: cbase-shaping

Class-map: class-default (match-any)
  11179 packets, 717408 bytes
  5 minute offered rate 25000 bps, drop rate 0 bps
  Match: any
  Queueing
  queue limit 64 packets
  (queue depth/total drops/no-buffer drops) 0/0/0
  (pkts output/bytes output) 11179/717408
  shape (average) cir 368400, bc 3684, be 0
  target shape rate 368400
lower bound cir 0,  adapt to fecn 0

  Service-policy : WAN-EDGE

queue stats for all priority classes:
  Queueing
  queue limit 64 packets
  (queue depth/total drops/no-buffer drops) 0/0/0
  (pkts output/bytes output) 11014/704896

Class-map: voice (match-any)
  11014 packets, 704896 bytes   ** These packets increment.
  5 minute offered rate 25000 bps, drop rate 0 bps
  Match: ip dscp ef (46)
1640 packets, 104960 bytes
5 minute rate 0 bps
  Match: protocol rtp
0 packets, 0 bytes
5 minute rate 0 bps
  Priority: 33% (121 kbps), burst bytes 3000, b/w exceed drops: 0

  compress:   * I get nothing on this.
  header ip rtp
  UDP/RTP (compression on, Cisco, RTP)
Sent:0 total, 0 compressed,
 0 bytes saved, 0 bytes sent
 rate 0 bps

Mark Nigh
Systems Engineer
mn...@netelligent.com
 (p) 314.392.6926
[cid:image001.gif@01CAB7B1.273BDF10]



This transmission and any attached files are privileged, confidential or 
otherwise the exclusive property of the intended recipient or Netelligent 
Corporation. If you are not the intended recipient, any disclosure, copying, 
distribution or use of any of the information contained in or attached to this 
transmission is strictly prohibited. If you have received this transmission in 
error, please contact us immediately by responding to this message or by 
telephone (314-392-6900) and promptly destroy the original transmission and its 
attachments.
<>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] (no subject)

[Jefferson Wilson]

I am up on pod 14 and things are ok.  Try just reloading the turning on
and off the equipment that won't load for you.  Also on of  the Volume 2
labs was mislabaled.  Try loading the "Final" config and see what
results you get.

 

Jefferson

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Vol 2 Lab 1 Q 4.2 - Gatekeeper and CUBE - No Calls

[Wael Agina]

Dear Team,

I am tring the gatekeeper / CUBE config on vol2 lab 1 - Q4.2.
Actually i followed up the proctor guide and see all points registered OK to
GK and seems fine.

Now I have SCCP / BR2 can call SCCP at BR1
All other calls not working as following:
SCCP / BR2  HQ PH2 / SIP CIPC --- On IP Blue Br2 ph 2 can see ring out
message , but no think received on CIPC !
After a while disconnect and give fast tone.



SIP / BR2 [xlite] --- BR1 / HQ  NO Calls and hear [person u r calling
not available]
Debug on Br2 showsit match the out dialpeer and sent call to GK , on GK i
recieve some debugs , but call get disconnected.


from HQ Ph 2 SIP or Br1 ph 1 sccp no calls to Br2 sccp / sip ,
Just hear single short tone then silent then fast tone that call not
working.


Any Advise or suggestions ?



Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com