Re: [OSL | CCIE_Voice] Switch-type Primary-ni setting Cng Type automaticlly
I agree with Roger, about your question, primary-ni is the standard pri interface in the USA, so when you send a 10 digit long number it set the type as national also if you send a 7 digit number it will set the call as subscriber, with primary-net5 is not the case becouse it doesn't recognize namp hth Date: Sat, 1 May 2010 10:29:41 +1000 From: rhender...@gmail.com To: spoli...@hotmail.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Switch-type Primary-ni setting Cng Type automaticlly The standard rule of a CCIE lab is that if a question doesn't specify something, it doesn't matter (and hence we shouldn't care). Roger On Sat, May 1, 2010 at 10:17 AM, Sergio Polizer spoli...@hotmail.com wrote: Hi, While doing the Vol 2 workbooks I have observed that when site Br1 (ISDN Pri/primary-ni) is configured as H323 the IOS set automaticlly the calling type. If I change the switch-type to primary-net5 it does not happens e.g for Br2. See bellow: Primary-NI Calling Party Number i = 0x2181, '4158881002' Plan:ISDN, Type:National Primary-Net5 Calling Party Number i = 0x0081, '4158881002' Plan:Unknown, Type:Unknown If the question does not say anything regarding calling type should We care about that? I appreciate your comments. Sergio. Cansado de entrar em todas as suas diferentes contas de email? Veja como juntar todas ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _ Hotmail: Trusted email with powerful SPAM protection. https://signup.live.com/signup.aspx?id=60969___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Is it must to give codec G711ulaw under voice register pool 1
Hi, if you are asked to use g711 for intra-site calls and you don't specify codedc g771u under voice register pool, intrasite calls to/from this phone to let say to other sccp phone in the same site will use g729 and you will brake the requirements hth Date: Fri, 30 Apr 2010 19:25:10 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Is it must to give codec G711ulaw under voice register pool 1 Is it must to give codec G711ulaw under voice register pool 1 I believe it Q dependent and also If I have G711ulaw under voice reg pool in that case if I am calling say via GK from HQ into CME the transcoders will be needed, but is there anythign else I am missing whcih will break if I don't mention any codec under voice reg pool...which by default is G729 thx -V _ Hotmail: Free, trusted and rich email service. https://signup.live.com/signup.aspx?id=60969___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Switch-type Primary-ni setting Cng Type automaticlly
It makes sense. Thanks, Sergio. From: gorr...@hotmail.com To: rhender...@gmail.com; spoli...@hotmail.com CC: ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] Switch-type Primary-ni setting Cng Type automaticlly Date: Sat, 1 May 2010 09:34:11 + I agree with Roger, about your question, primary-ni is the standard pri interface in the USA, so when you send a 10 digit long number it set the type as national also if you send a 7 digit number it will set the call as subscriber, with primary-net5 is not the case becouse it doesn't recognize namp hth Date: Sat, 1 May 2010 10:29:41 +1000 From: rhender...@gmail.com To: spoli...@hotmail.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Switch-type Primary-ni setting Cng Type automaticlly The standard rule of a CCIE lab is that if a question doesn't specify something, it doesn't matter (and hence we shouldn't care). Roger On Sat, May 1, 2010 at 10:17 AM, Sergio Polizer spoli...@hotmail.com wrote: Hi, While doing the Vol 2 workbooks I have observed that when site Br1 (ISDN Pri/primary-ni) is configured as H323 the IOS set automaticlly the calling type. If I change the switch-type to primary-net5 it does not happens e.g for Br2. See bellow: Primary-NI Calling Party Number i = 0x2181, '4158881002' Plan:ISDN, Type:National Primary-Net5 Calling Party Number i = 0x0081, '4158881002' Plan:Unknown, Type:Unknown If the question does not say anything regarding calling type should We care about that? I appreciate your comments. Sergio. Cansado de entrar em todas as suas diferentes contas de email? Veja como juntar todas ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Hotmail: Trusted email with powerful SPAM protection. Sign up now. _ O Internet Explorer 8 te dá dicas de como navegar mais seguro. Clique para ler todas. http://www.microsoft.com/brasil/windows/internet-explorer/?WT.mc_id=1500___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] DHCP Server/Subnet Configuration
When configuring callmanager as a DHCP server does anyone know the affects of leaving the default settings of 0 for both the server and the subnet for the following values ? Arp Cache Timeout (sec)*: 0 IP Address Lease Time (sec)*: 0 Renewal(T1) Time (sec)*: 0 Rebinding(T2) Time (sec)*: 0 Thx, Mike ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] DHCP Server/Subnet Configuration
I believe there are a couple of bugs open on that and setting the values to 0 doesn't work. I would like to hear if anybody on the group has a different experience. Sent from my phone On May 1, 2010, at 8:02 AM, Mike Brooks 2xcci...@gmail.com wrote: When configuring callmanager as a DHCP server does anyone know the affects of leaving the default settings of 0 for both the server and the subnet for the following values ? Arp Cache Timeout (sec)*: 0 IP Address Lease Time (sec)*: 0 Renewal(T1) Time (sec)*: 0 Rebinding(T2) Time (sec)*: 0 Thx, Mike ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] DHCP Server/Subnet Configuration
I haven't seen problem in my labs leaving that to default values. If I'm not sure 0 means: Arp Cache Timeout (sec)*: 60s IP Address Lease Time (sec)*: 7 days Renewal(T1) Time (sec)*: 0 3,5 days Rebinding(T2) Time (sec)*: around 5 day From: pav.c...@gmail.com To: 2xcci...@gmail.com Date: Sat, 1 May 2010 09:53:13 -0500 CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] DHCP Server/Subnet Configuration I believe there are a couple of bugs open on that and setting the values to 0 doesn't work. I would like to hear if anybody on the group has a different experience. Sent from my phone On May 1, 2010, at 8:02 AM, Mike Brooks 2xcci...@gmail.com wrote: When configuring callmanager as a DHCP server does anyone know the affects of leaving the default settings of 0 for both the server and the subnet for the following values ? Arp Cache Timeout (sec)*: 0 IP Address Lease Time (sec)*: 0 Renewal(T1) Time (sec)*: 0 Rebinding(T2) Time (sec)*: 0 Thx, Mike ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _ O Internet Explorer 8 te dá dicas de como navegar mais seguro. Clique para ler todas. http://www.microsoft.com/brasil/windows/internet-explorer/?WT.mc_id=1500___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] volume 2 lab1 task 4.2
Hi all, I am working on vol2 lab1, trying to get the call from the HQ site to BR2. I am done with the configs on the HQ for the GK and CUBE and on the BR2 RTR. I am unable to call from 5002 (HQ) to BR2(3006) or 3002. Here are my command output: HQ-RTR# HQ-RTR#show gatek end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 10.10.110.3 1720 10.10.110.3 8 UCME VOIP-GW H323-ID: BR2-RTR Voice Capacity Max.= Avail.= Current.= 0 10.10.200.3 1720 10.10.200.3 51942 VIA VOIP-GW H323-ID: HQ-RTR Voice Capacity Max.= Avail.= Current.= 0 10.10.210.1041157 10.10.210.1033095 UCM VOIP-GW H323-ID: gk-trunk_1 Voice Capacity Max.= Avail.= Current.= 0 10.10.210.1136205 10.10.210.1132802 UCM VOIP-GW H323-ID: gk-trunk_2 Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 4 HQ-RTR#deb gatek main 10 HQ-RTR# May 1 14:53:43.570: ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup May 1 14:53:43.570: ////GK/gk_rassrv_arq: arqp=0x48C47E48,crv=0xA, answerCall=0 May 1 14:53:43.570: ////GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/gk_dns_query: No Name servers May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_get_addrinfo: (3006) Tech-prefix match failed. May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_get_addrinfo: (3006) Matched zone prefix 3 and remainder 006 May 1 14:53:43.570: ////GK/gk_rassrv_get_ingress_network: returning default ingress network = 1 May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x48C26658 May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone: matched zone is UCM, and z_invianamelen=0 May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x48C25E20 May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone: matched zone is UCME, and z_outvianamelen=3 May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone and z_outvianamep=VIA May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone: Received ARQ for a zone (UCME) that has an outviazone (VIA) specified. Pick an IP-IP gateway in that viazone. May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: zonep: 0x48CF0E34, tpp: 0x0, current_endpt: 0 May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: Selecting any IPIPGW. qelemp.head=0x485E6BD0, use_count=1, current_endpt=0 May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: qelemp=0x485E6BD0, loop_count=0 May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: Examining tgwp 0x485FA4C4, g_supp_prots: 0x50 qelemp: 0x485E6BD0, loop_count: 1 May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: Searched through the entire gateway list. loop_count=0 May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: Could not find an IPIPGW. May 1 14:53:43.574: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_get_addrinfo(3006): Viazone gateway selection failed for zone VIA HQ-RTR# May 1 14:53:43.574: //00DBE8DB0A00/00DBE8DB0A00/GK/gk_rassrv_sep_arq: rassrv_get_addrinfo() failed (return code = 0x805) HQ-RTR# May 1 14:53:44.934: ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup May 1 14:53:45.790: ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup HQ-RTR# May 1 14:53:46.306: ////GK/gk_process: got a TIMER event May 1 14:53:46.306: ////GK/gk_handle_timers May 1 14:53:46.306: ////GK/gk_handle_timers: managed timer expired 0x467BC298 HQ-RTR#show gatek gw-type-prefix GATEWAY TYPE PREFIX TABLE = Prefix: 1#*(Default gateway-technology) Zone UCM master gateway list: 10.10.210.10:41157 gk-trunk_1 10.10.210.11:36205 gk-trunk_2 Zone UCME master gateway list: 10.10.110.3:1720 BR2-RTR I cannot even run the command debug voip ipipgw. What am I missing? Thanks Kalyan ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] volume 2 lab1 task 4.2
Can you post a show run on the HQ router? On Sun, May 2, 2010 at 5:06 AM, Kalyan iyer kparam2...@gmail.com wrote: Hi all, I am working on vol2 lab1, trying to get the call from the HQ site to BR2. I am done with the configs on the HQ for the GK and CUBE and on the BR2 RTR. I am unable to call from 5002 (HQ) to BR2(3006) or 3002. Here are my command output: HQ-RTR# HQ-RTR#show gatek end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 10.10.110.3 1720 10.10.110.3 8 UCME VOIP-GW H323-ID: BR2-RTR Voice Capacity Max.= Avail.= Current.= 0 10.10.200.3 1720 10.10.200.3 51942 VIA VOIP-GW H323-ID: HQ-RTR Voice Capacity Max.= Avail.= Current.= 0 10.10.210.1041157 10.10.210.1033095 UCM VOIP-GW H323-ID: gk-trunk_1 Voice Capacity Max.= Avail.= Current.= 0 10.10.210.1136205 10.10.210.1132802 UCM VOIP-GW H323-ID: gk-trunk_2 Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 4 HQ-RTR#deb gatek main 10 HQ-RTR# May 1 14:53:43.570: ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup May 1 14:53:43.570: ////GK/gk_rassrv_arq: arqp=0x48C47E48,crv=0xA, answerCall=0 May 1 14:53:43.570: ////GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/gk_dns_query: No Name servers May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_get_addrinfo: (3006) Tech-prefix match failed. May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_get_addrinfo: (3006) Matched zone prefix 3 and remainder 006 May 1 14:53:43.570: ////GK/gk_rassrv_get_ingress_network: returning default ingress network = 1 May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x48C26658 May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone: matched zone is UCM, and z_invianamelen=0 May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x48C25E20 May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone: matched zone is UCME, and z_outvianamelen=3 May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone and z_outvianamep=VIA May 1 14:53:43.570: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_arq_select_viazone: Received ARQ for a zone (UCME) that has an outviazone (VIA) specified. Pick an IP-IP gateway in that viazone. May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: zonep: 0x48CF0E34, tpp: 0x0, current_endpt: 0 May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: Selecting any IPIPGW. qelemp.head=0x485E6BD0, use_count=1, current_endpt=0 May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: qelemp=0x485E6BD0, loop_count=0 May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: Examining tgwp 0x485FA4C4, g_supp_prots: 0x50 qelemp: 0x485E6BD0, loop_count: 1 May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: Searched through the entire gateway list. loop_count=0 May 1 14:53:43.574: ////GK/gk_gw_select_ipipgw_random: Could not find an IPIPGW. May 1 14:53:43.574: //00DBE8DB0A00/00DBE8DB0A00/GK/rassrv_get_addrinfo(3006): Viazone gateway selection failed for zone VIA HQ-RTR# May 1 14:53:43.574: //00DBE8DB0A00/00DBE8DB0A00/GK/gk_rassrv_sep_arq: rassrv_get_addrinfo() failed (return code = 0x805) HQ-RTR# May 1 14:53:44.934: ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup May 1 14:53:45.790: ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup HQ-RTR# May 1 14:53:46.306: ////GK/gk_process: got a TIMER event May 1 14:53:46.306: ////GK/gk_handle_timers May 1 14:53:46.306: ////GK/gk_handle_timers: managed timer expired 0x467BC298 HQ-RTR#show gatek gw-type-prefix GATEWAY TYPE PREFIX TABLE = Prefix: 1#*(Default gateway-technology) Zone UCM master gateway list: 10.10.210.10:41157 gk-trunk_1 10.10.210.11:36205 gk-trunk_2 Zone UCME master gateway list: 10.10.110.3:1720 BR2-RTR I cannot even run the command debug voip ipipgw. What am I missing? Thanks Kalyan ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Is it must to give codec G711ulaw under voice register pool 1
Angel I give you 11 out of 10, I would not have thought about it in my dreams evev, thanks a million bud [?] On Sat, May 1, 2010 at 2:37 AM, Angel Perez gorr...@hotmail.com wrote: Hi, if you are asked to use g711 for intra-site calls and you don't specify codedc g771u under voice register pool, intrasite calls to/from this phone to let say to other sccp phone in the same site will use g729 and you will brake the requirements hth -- Date: Fri, 30 Apr 2010 19:25:10 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Is it must to give codec G711ulaw under voice register pool 1 Is it must to give codec G711ulaw under voice register pool 1 I believe it Q dependent and also If I have G711ulaw under voice reg pool in that case if I am calling say via GK from HQ into CME the transcoders will be needed, but is there anythign else I am missing whcih will break if I don't mention any codec under voice reg pool...which by default is G729 thx -V -- Hotmail: Free, trusted and rich email service. Get it now.https://signup.live.com/signup.aspx?id=60969 360.gif___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
