[OSL | CCIE_Voice] Gatekeeper with CUBE

[mgscip]

Hi All,

I'm testing with Gatekeeper with CUBE.

When i make call from HQ to site C through Gatekeeper , HQ Phone keep ringing 
even the call answered in the Site C.

I have unchecked the "Wait for TCS" in the Gatekeeper trunk . but the results 
are same.

How to proceed further on this ?

Thanks.___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] auto qos voip trust issue

[donny f]

hi all,

when  I run "auto qos voip trust "  on  HQ-- SB  with BW 384.   My  HQ-SC
become  56k CIR

what is workaround, if I still want to use  " Auto QOS "

tks
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] how to make UCSInstall_UCOS_8.5.1.10000-26

[bruno]

use cco ,can download 8.5 and 8.6 non-bootable  version only.it 's use for 
upgrade.

  
   
  
  -- Original --
  From:  "Bryan Byrne";
 Date:  Fri, Aug 5, 2011 06:18 PM
 To:  "bruno"; 
 Cc:  "ccie_voice"; 
 Subject:  Re: [OSL | CCIE_Voice] how to make UCSInstall_UCOS_8.5.1.1-26

  
There is a bootable and a non-bootable version of the ISO.  My guess is you got 
the non-bootable version and I do not believe there is a way to make the DVD 
bootable.  You just need to download the correct version. 

 -Bryan
 

 
  On Aug 5, 2011, at 3:23 AM, bruno wrote:

   
 Hello all,
  I downloaded three files of UNREST version from cisco download , merged them 
and built an iso image however when trying to boot a vm machine on an esx UCS 
servers it complains and instead looking at DHCP for network location to find 
an image. This is when i am trying to boot it from local CD/DVD drive or from a 
loca storage source. Also what is confusing about these files is that in 
release notes for 8.5(1) it says this iso can be used for fresh new install as 
well as upgrade but then on :  
http://www.cisco.com/en/US/products/ps7273/prod_release_notes_list.html
page 4
 
Before You Begin
In Cisco Unified Communications Manager 8.5(1), the image available for 
download from Cisco.com is
a bootable image that can be burned to DVD and used for both upgrades and fresh 
installs. Cisco Unified
Communications Manager 8.5(1) upgrade DVDs ordered from Cisco are also bootable 
for use with
upgrades or fresh installs.
 
Then on page 8 it says :
 
Note Because the UCSInstall_UCOS_8.5.1.1-26 build specifies a nonbootable 
ISO, the build proves
useful only for upgrades. You cannot use this build for new installations.
 
it can boot on vmware but not esxi . 
 
I am still working to figure it if its really an issue with iso image i created 
or VMware.
 
i saw some post in internet ,ppl said we can make it bootable ,how to do it ?
 
any input will be highly appreciated.

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Resolved: [UCCX INSTALL AND ACCESS POST INSTALLATION QUESTION AND ERROR]

[Michael.Sears]

Here I was making a big deal and diving deep and I was just using the wrong 
credentials to log in for the first time.  Thanks for reading my post.


From: Sears, Michael (msears)
Sent: Friday, August 05, 2011 2:07 PM
To: 'ccie_voice@onlinestudylist.com'
Subject: [UCCX INSTALL AND ACCESS POST INSTALLATION QUESTION AND ERROR]

I've just completed installing Windows 2003 Server from Cisco and UCCX7 on ESXi 
and need a little help.  When I try to login to Cisco Unified Contact Center 
Express Administration I get the following error:

** I/O Error in AXL. Please try again. Please use the browsers back button to 
go back to the login page.  **

Am I supposed to setup an AXL user on UCCX box?  I'm confused and don't know 
that much about UCCX and would really like to get it going.

I setup an AXL user in Publisher.  Am I supposed to configure an application 
server?  If so my options don't have UCCX.  I must be missing a step here.  The 
server is up and I can RDP to it and also get a console to it from ESXi.  At no 
time during the install did it ask me for the publisher address.  I also have 
AXL services on the Publisher and Subscriber enabled and Standard CTI Enable.  
I use the admin and it's password since it already has AXL and CTI  Standard 
Enable.

What am I missing here, I know its something stupid I didn't do, but can't 
figure out what.

Any help would be appreciated.



Michael Sears
CompuCom
US West, Professional Services
Senior IPT Engineer
Office:+1 720.344.6833
Mobile:   +1 303.328.5590
Fax:+1 978.863.0740
Conf:  +1 866-389-9494 #6159225  Host Code: 879 7896
E-Mail:   michael.se...@compucom.com
Web:   http://www.compucom.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] [UCCX INSTALL AND ACCESS POST INSTALLATION QUESTION AND ERROR]

[khaled Saholy]

 
Hi Michael,
 
Have you used the first time after installation :Administrator (username- case 
sensitive) with password (ciscocisco).
 
Regards.
 
Khaled Al-Saholy
 



From: michael.se...@compucom.com
To: ccie_voice@onlinestudylist.com
Date: Fri, 5 Aug 2011 16:07:22 -0400
Subject: [OSL | CCIE_Voice] [UCCX INSTALL AND ACCESS POST INSTALLATION QUESTION 
AND ERROR]






I’ve just completed installing Windows 2003 Server from Cisco and UCCX7 on ESXi 
and need a little help.  When I try to login to Cisco Unified Contact Center 
Express Administration I get the following error:
 
** I/O Error in AXL. Please try again. Please use the browsers back button to 
go back to the login page.  **
 
Am I supposed to setup an AXL user on UCCX box?  I’m confused and don’t know 
that much about UCCX and would really like to get it going.
 
I setup an AXL user in Publisher.  Am I supposed to configure an application 
server?  If so my options don’t have UCCX.  I must be missing a step here.  The 
server is up and I can RDP to it and also get a console to it from ESXi.  At no 
time during the install did it ask me for the publisher address.  I also have 
AXL services on the Publisher and Subscriber enabled and Standard CTI Enable.  
I use the admin and it’s password since it already has AXL and CTI  Standard 
Enable.
 
What am I missing here, I know its something stupid I didn’t do, but can’t 
figure out what.
 
Any help would be appreciated.
 
 
 
Michael Sears 
CompuCom
US West, Professional Services
Senior IPT Engineer
Office:+1 720.344.6833
Mobile:   +1 303.328.5590 
Fax:+1 978.863.0740
Conf:  +1 866-389-9494 #6159225  Host Code: 879 7896
E-Mail:   michael.se...@compucom.com
Web:   http://www.compucom.com 
 
___ For more information regarding 
industry leading CCIE Lab training, please visit www.ipexpert.com Are you a 
CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com 
   ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] [UCCX INSTALL AND ACCESS POST INSTALLATION QUESTION AND ERROR]

[CCIEVoiceKP]

Sorry ... Dang "smartphones" ...

L:  Administrator
P:  ciscocisco

KP

Sent from my iPhone and I have big thumbs ... So please excuse the typos.

On Aug 5, 2011, at 1:31 PM, CCIEVoiceKP  If this is prior to integration with CUCM login with:
> 
> L: Admisitrator
> P: ciscocisco
> 
> You'll need to go through this integration process which allows  you to 
> automagically create your jtapi and rmcm app users needed by CCX.  In 
> addition you will need to create an end user in CUCM with axl user perms that 
> you'll use as a CCX admin account after the initial integration.
> 
> KP
> 
> Sent from my iPhone and I have big thumbs ... So please excuse the typos.
> 
> On Aug 5, 2011, at 12:07 PM,  wrote:
> 
>> I’ve just completed installing Windows 2003 Server from Cisco and UCCX7 on 
>> ESXi and need a little help.  When I try to login to Cisco Unified Contact 
>> Center Express Administration I get the following error:
>> 
>>  
>> 
>> ** I/O Error in AXL. Please try again. Please use the browsers back button 
>> to go back to the login page.  **
>> 
>>  
>> 
>> Am I supposed to setup an AXL user on UCCX box?  I’m confused and don’t know 
>> that much about UCCX and would really like to get it going.
>> 
>>  
>> 
>> I setup an AXL user in Publisher.  Am I supposed to configure an application 
>> server?  If so my options don’t have UCCX.  I must be missing a step here.  
>> The server is up and I can RDP to it and also get a console to it from ESXi. 
>>  At no time during the install did it ask me for the publisher address.  I 
>> also have AXL services on the Publisher and Subscriber enabled and Standard 
>> CTI Enable.  I use the admin and it’s password since it already has AXL and 
>> CTI  Standard Enable.
>> 
>>  
>> 
>> What am I missing here, I know its something stupid I didn’t do, but can’t 
>> figure out what.
>> 
>>  
>> 
>> Any help would be appreciated.
>> 
>>  
>> 
>>  
>> 
>>  
>> 
>> Michael Sears
>> 
>> CompuCom
>> 
>> US West, Professional Services
>> 
>> Senior IPT Engineer
>> 
>> Office:+1 720.344.6833
>> 
>> Mobile:   +1 303.328.5590
>> 
>> Fax:+1 978.863.0740
>> 
>> Conf:  +1 866-389-9494 #6159225  Host Code: 879 7896
>> 
>> E-Mail:   michael.se...@compucom.com
>> 
>> Web:   http://www.compucom.com
>> 
>>  
>> 
>> ___
>> For more information regarding industry leading CCIE Lab training, please 
>> visit www.ipexpert.com
>> 
>> Are you a CCNP or CCIE and looking for a job? Check out 
>> www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] [UCCX INSTALL AND ACCESS POST INSTALLATION QUESTION AND ERROR]

[CCIEVoiceKP]

If this is prior to integration with CUCM login with:

L: Admisitrator
P: ciscocisco

You'll need to go through this integration process which allows  you to 
automagically create your jtapi and rmcm app users needed by CCX.  In addition 
you will need to create an end user in CUCM with axl user perms that you'll use 
as a CCX admin account after the initial integration.

KP

Sent from my iPhone and I have big thumbs ... So please excuse the typos.

On Aug 5, 2011, at 12:07 PM,  wrote:

> I’ve just completed installing Windows 2003 Server from Cisco and UCCX7 on 
> ESXi and need a little help.  When I try to login to Cisco Unified Contact 
> Center Express Administration I get the following error:
> 
>  
> 
> ** I/O Error in AXL. Please try again. Please use the browsers back button to 
> go back to the login page.  **
> 
>  
> 
> Am I supposed to setup an AXL user on UCCX box?  I’m confused and don’t know 
> that much about UCCX and would really like to get it going.
> 
>  
> 
> I setup an AXL user in Publisher.  Am I supposed to configure an application 
> server?  If so my options don’t have UCCX.  I must be missing a step here.  
> The server is up and I can RDP to it and also get a console to it from ESXi.  
> At no time during the install did it ask me for the publisher address.  I 
> also have AXL services on the Publisher and Subscriber enabled and Standard 
> CTI Enable.  I use the admin and it’s password since it already has AXL and 
> CTI  Standard Enable.
> 
>  
> 
> What am I missing here, I know its something stupid I didn’t do, but can’t 
> figure out what.
> 
>  
> 
> Any help would be appreciated.
> 
>  
> 
>  
> 
>  
> 
> Michael Sears
> 
> CompuCom
> 
> US West, Professional Services
> 
> Senior IPT Engineer
> 
> Office:+1 720.344.6833
> 
> Mobile:   +1 303.328.5590
> 
> Fax:+1 978.863.0740
> 
> Conf:  +1 866-389-9494 #6159225  Host Code: 879 7896
> 
> E-Mail:   michael.se...@compucom.com
> 
> Web:   http://www.compucom.com
> 
>  
> 
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] [UCCX INSTALL AND ACCESS POST INSTALLATION QUESTION AND ERROR]

[Thomas Koch]

Mike,

There is a one-time login for UCCX 7.0 ..it goes thru the setup for the CRA
Engine.

I'd have to look at my notes.if you go to CCO and look for the config guide
for UCCX 7, it should be in there..

T

 

Regards,

Thomas Koch

Owner/Consultant 

CCDA, CCNA, CCNP Voice, Cisco IPT Design Specalist
Digitones, LLC

Office:+1.630.296.8461
Cell: +1.630.235.4309

E-mail:   digito...@comcast.net

http://www.linkedin.com/pub/thom-koch/6/a12/b10

 

From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of
michael.se...@compucom.com
Sent: Friday, August 05, 2011 3:07 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] [UCCX INSTALL AND ACCESS POST INSTALLATION
QUESTION AND ERROR]

 

I've just completed installing Windows 2003 Server from Cisco and UCCX7 on
ESXi and need a little help.  When I try to login to Cisco Unified Contact
Center Express Administration I get the following error:

 

** I/O Error in AXL. Please try again. Please use the browsers back button
to go back to the login page.  **

 

Am I supposed to setup an AXL user on UCCX box?  I'm confused and don't know
that much about UCCX and would really like to get it going.

 

I setup an AXL user in Publisher.  Am I supposed to configure an application
server?  If so my options don't have UCCX.  I must be missing a step here.
The server is up and I can RDP to it and also get a console to it from ESXi.
At no time during the install did it ask me for the publisher address.  I
also have AXL services on the Publisher and Subscriber enabled and Standard
CTI Enable.  I use the admin and it's password since it already has AXL and
CTI  Standard Enable.

 

What am I missing here, I know its something stupid I didn't do, but can't
figure out what.

 

Any help would be appreciated.

 

 

 

Michael Sears 

CompuCom

US West, Professional Services

Senior IPT Engineer

Office:+1 720.344.6833

Mobile:   +1 303.328.5590 

Fax:+1 978.863.0740

Conf:  +1 866-389-9494 #6159225  Host Code: 879 7896

E-Mail:   michael.se...@compucom.com

Web:   http://www.compucom.com   

 

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] [UCCX INSTALL AND ACCESS POST INSTALLATION QUESTION AND ERROR]

[Michael.Sears]

I've just completed installing Windows 2003 Server from Cisco and UCCX7 on ESXi 
and need a little help.  When I try to login to Cisco Unified Contact Center 
Express Administration I get the following error:

** I/O Error in AXL. Please try again. Please use the browsers back button to 
go back to the login page.  **

Am I supposed to setup an AXL user on UCCX box?  I'm confused and don't know 
that much about UCCX and would really like to get it going.

I setup an AXL user in Publisher.  Am I supposed to configure an application 
server?  If so my options don't have UCCX.  I must be missing a step here.  The 
server is up and I can RDP to it and also get a console to it from ESXi.  At no 
time during the install did it ask me for the publisher address.  I also have 
AXL services on the Publisher and Subscriber enabled and Standard CTI Enable.  
I use the admin and it's password since it already has AXL and CTI  Standard 
Enable.

What am I missing here, I know its something stupid I didn't do, but can't 
figure out what.

Any help would be appreciated.



Michael Sears
CompuCom
US West, Professional Services
Senior IPT Engineer
Office:+1 720.344.6833
Mobile:   +1 303.328.5590
Fax:+1 978.863.0740
Conf:  +1 866-389-9494 #6159225  Host Code: 879 7896
E-Mail:   michael.se...@compucom.com
Web:   http://www.compucom.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Unable to reach the phone | POD 34

[Ilham Jabir]

Even from the switch ( HQ 3750 ) i am unable to ping the phone though its 
directly connected.
Can it be something with the phone hardware?

Even if the firmware is on SIP still should be able to ping isnt it?

On 06-Aug-2011, at 12:11 AM, Ilham Jabir wrote:

> DHCP settings are correct. Cross checked again. Phone has got the correct IP 
> as well.
> Default rtr settings also correct.
> 
> Can it be related to the wrong firmware on the phone.
> 
> Sh cdp indicates the MAC of the phone as : Device ID: SIP001BD4C6C11D
> 
> On 06-Aug-2011, at 12:04 AM, Chris Martin wrote:
> 
>> Check your dhcp setup specifically default-router, keep in mind that HQ1 is 
>> normally 10.10.200.3 on voice vlan, not 10.10.200.1.  (Just a guess on which 
>> gateway your working on)
>> 
>> On Fri, Aug 5, 2011 at 10:47 AM, Ilham Jabir  wrote:
>> i am on pod 34. configurations looks fine. Layer one is also fine as per 
>> proctor lab support. Unable to reach the phone.
>> 
>> Need some guidance how to go further. May be i am missing any steps here.
>> 
>> Phone details:
>> 
>> Connected to HQ 3750
>> Source: Proctor Lab Phone
>> Status: Phone has got correct DHCP IP
>> 
>> Status: Can not ping, Can not connect, in CUCM registration unknown.
>> 
>> 
>> ___
>> For more information regarding industry leading CCIE Lab training, please 
>> visit www.ipexpert.com
>> 
>> Are you a CCNP or CCIE and looking for a job? Check out 
>> www.PlatinumPlacement.com
>> 
> 

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CME Config generator

[Danny Wong]

Hi all,

http://itunes.apple.com/us/app/cme-config-generator/id453025819?ls=1&mt=8

This is an iPhone apps that allow you to generate Cisco CME router config
without need to know a single line of CLI command!!

You can use it as a example to start with and learn CME, it also includes
the latest PVDM3 video switching configuration!

Hope it helps!

Cheers,
Danny
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Unable to reach the phone | POD 34

[Ilham Jabir]

DHCP settings are correct. Cross checked again. Phone has got the correct IP as 
well.
Default rtr settings also correct.

Can it be related to the wrong firmware on the phone.

Sh cdp indicates the MAC of the phone as : Device ID: SIP001BD4C6C11D

On 06-Aug-2011, at 12:04 AM, Chris Martin wrote:

> Check your dhcp setup specifically default-router, keep in mind that HQ1 is 
> normally 10.10.200.3 on voice vlan, not 10.10.200.1.  (Just a guess on which 
> gateway your working on)
> 
> On Fri, Aug 5, 2011 at 10:47 AM, Ilham Jabir  wrote:
> i am on pod 34. configurations looks fine. Layer one is also fine as per 
> proctor lab support. Unable to reach the phone.
> 
> Need some guidance how to go further. May be i am missing any steps here.
> 
> Phone details:
> 
> Connected to HQ 3750
> Source: Proctor Lab Phone
> Status: Phone has got correct DHCP IP
> 
> Status: Can not ping, Can not connect, in CUCM registration unknown.
> 
> 
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
> 

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Unable to reach the phone | POD 34

[Chris Martin]

Check your dhcp setup specifically default-router, keep in mind that HQ1 is
normally 10.10.200.3 on voice vlan, not 10.10.200.1.  (Just a guess on which
gateway your working on)

On Fri, Aug 5, 2011 at 10:47 AM, Ilham Jabir  wrote:

> i am on pod 34. configurations looks fine. Layer one is also fine as per
> proctor lab support. Unable to reach the phone.
>
> Need some guidance how to go further. May be i am missing any steps here.
>
> Phone details:
>
> Connected to HQ 3750
> Source: Proctor Lab Phone
> Status: Phone has got correct DHCP IP
>
> Status: Can not ping, Can not connect, in CUCM registration unknown.
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Unable to reach the phone | POD 34

[Ilham Jabir]

i am on pod 34. configurations looks fine. Layer one is also fine as per 
proctor lab support. Unable to reach the phone.

Need some guidance how to go further. May be i am missing any steps here.

Phone details:

Connected to HQ 3750
Source: Proctor Lab Phone
Status: Phone has got correct DHCP IP

Status: Can not ping, Can not connect, in CUCM registration unknown.


___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] how to make UCSInstall_UCOS_8.5.1.10000-26 bootable

[khaled Saholy]

 
Hi.
 
Try this link:
 
http://htluo.blogspot.com/2010/04/how-to-make-non-bootable-iso-image.html
 
Regards.
 
Khaled Al-Saholy
 



From: bruno.juni...@gmail.com
To: gwen...@gmail.com; ccie_voice@onlinestudylist.com
Date: Fri, 5 Aug 2011 18:10:14 +0800
Subject: Re: [OSL | CCIE_Voice] how to make UCSInstall_UCOS_8.5.1.1-26 
bootable






 
Hello，
 
thx for ur reply . could u give me a link.
 
best regards
Bruno
 
 
 

 



 
 

-- Original --

From:  "gwen...@gmail.com";
Date:  Fri, Aug 5, 2011 06:06 PM
To:  "bruno"; 
"CCIE-V邮件列表"; 

Subject:  Re: [OSL | CCIE_Voice] how to make UCSInstall_UCOS_8.5.1.1-26 
bootable
 Have u tried to use the Cisco VMWare image file instead of generic. It can be 
downloaded from Wikipedia. Also I have done this and it worked no prob. You may 
not have names the ISO file correctly.

Sent from my HTC on the Now Network from Sprint!


- Reply message -
From: "bruno" 
Date: Fri, Aug 5, 2011 5:26 am
Subject: [OSL | CCIE_Voice] how to make UCSInstall_UCOS_8.5.1.1-26 bootable
To: "CCIE-V邮件列表" 






 

Hello all,
  I downloaded three files of UNREST version from cisco download , merged them 
and built an iso image however when trying to boot a vm machine on an esx UCS 
servers it complains and instead looking at DHCP for network location to find 
an image. This is when i am trying to boot it from local CD/DVD drive or from a 
loca storage source. Also what is confusing about these files is that in 
release notes for 8.5(1) it says this iso can be used for fresh new install as 
well as upgrade but then on : 
http://www.cisco.com/en/US/products/ps7273/prod_release_notes_list.html
page 4

Before You Begin
In Cisco Unified Communications Manager 8.5(1), the image available for 
download from Cisco.com is
a bootable image that can be burned to DVD and used for both upgrades and fresh 
installs. Cisco Unified
Communications Manager 8.5(1) upgrade DVDs ordered from Cisco are also bootable 
for use with
upgrades or fresh installs.

Then on page 8 it says :

Note Because the UCSInstall_UCOS_8.5.1.1-26 build specifies a nonbootable 
ISO, the build proves
useful only for upgrades. You cannot use this build for new installations.

it can boot on vmware but not esxi . 

I am still working to figure it if its really an issue with iso image i created 
or VMware.

i saw some post in internet ,ppl said we can make it bootable ,how to do it ?



___ For more information regarding 
industry leading CCIE Lab training, please visit www.ipexpert.com Are you a 
CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com 
   ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] how to make UCSInstall_UCOS_8.5.1.10000-26

[Bryan Byrne]

There is a bootable and a non-bootable version of the ISO.  My guess is you got 
the non-bootable version and I do not believe there is a way to make the DVD 
bootable.  You just need to download the correct version.

-Bryan


On Aug 5, 2011, at 3:23 AM, bruno wrote:

>  
> Hello all,
>  I downloaded three files of UNREST version from cisco download , merged them 
> and built an iso image however when trying to boot a vm machine on an esx UCS 
> servers it complains and instead looking at DHCP for network location to find 
> an image. This is when i am trying to boot it from local CD/DVD drive or from 
> a loca storage source. Also what is confusing about these files is that in 
> release notes for 8.5(1) it says this iso can be used for fresh new install 
> as well as upgrade but then on :
> http://www.cisco.com/en/US/products/ps7273/prod_release_notes_list.html
> page 4
> 
> Before You Begin
> In Cisco Unified Communications Manager 8.5(1), the image available for 
> download from Cisco.com is
> a bootable image that can be burned to DVD and used for both upgrades and 
> fresh installs. Cisco Unified
> Communications Manager 8.5(1) upgrade DVDs ordered from Cisco are also 
> bootable for use with
> upgrades or fresh installs.
> 
> Then on page 8 it says :
> 
> Note Because the UCSInstall_UCOS_8.5.1.1-26 build specifies a nonbootable 
> ISO, the build proves
> useful only for upgrades. You cannot use this build for new installations.
> 
> it can boot on vmware but not esxi .
> 
> I am still working to figure it if its really an issue with iso image i 
> created or VMware.
> 
> i saw some post in internet ,ppl said we can make it bootable ,how to do it ?
> 
> any input will be highly appreciated.
> 
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] SSH from Router.

[Wael Agina]

Thanks Michael for your mail, i tried a you did but it also doesnt work ,
kindly check below


HQ-R1#ssh 142.3.64.11
% No user specified nor available for SSH client
HQ-R1#ssh -l Administrator 142.3.64.11

Password:
Last login: Fri Aug  5 03:12:36 2011 from 142.3.64.200

   Welcome to the Platform Command Line Interface

   WARNING, VMware Virtual Environment Detected!

   VMware is NOT a supported platform!

admin:
admin:
admin:
admin:
admin:
admin:
admin:
admin:
admin:
admin:

On Fri, Aug 5, 2011 at 9:24 AM, Sears, Michael (msears) <
michael.se...@compucom.com> wrote:

> I am able to ssh from BR1, BR2, PSTN and HQ routers to all my VM servers
> just fine.  All I use is the following:
>
> ** **
>
> HQ-RTR#ssh 10.10.210.10
>
> ** **
>
> Password: 
>
> Last login: Thu Aug  4 18:01:47 2011
>
> ** **
>
>Welcome to the Platform Command Line Interface
>
> ** **
>
>WARNING, VMware Virtual Environment Detected!
>
> ** **
>
>VMware is NOT a supported platform!
>
> ** **
>
> admin:
>
> admin:
>
>   delete*
>
>   file*
>
>   help
>
>   quit
>
>   run*
>
>   set*
>
>   show*
>
>   unset*
>
>   utils*
>
> ** **
>
> It doesn’t hang and no options are required.  I see your trying to use a
> lot of options.  Hope this helps if not let me know if I can assist you.
> --ms
>
> ** **
>
> Michael Sears 
>
> CompuCom
>
> US West, Professional Services
>
> Senior IPT Engineer
>
> Office:+1 720.344.6833
>
> Mobile:   +1 303.328.5590 
>
> Fax:+1 978.863.0740
>
> Conf:  +1 866-389-9494 #6159225  Host Code: 879 7896
>
> E-Mail:   michael.se...@compucom.com
>
> Web:   http://www.compucom.com 
>
> ** **
>



-- 

Thanks and Best Regards,
Wael Agina
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] how to make UCSInstall_UCOS_8.5.1.10000-26 bootable

[唐灿博]

Hello，
  
 thx for ur reply . could u give me a link.
  
 best regards
 Bruno
  
  
  
 
  

  
   
  
  -- Original --
  From:  "gwen...@gmail.com";
 Date:  Fri, Aug 5, 2011 06:06 PM
 To:  "bruno"; 
"CCIE-V邮件列表"; 
 
 Subject:  Re: [OSL | CCIE_Voice] how to make UCSInstall_UCOS_8.5.1.1-26 
bootable

  
Have u tried to use the Cisco VMWare image file instead of generic. It can be 
downloaded from Wikipedia. Also I have done this and it worked no prob. You may 
not have names the ISO file correctly.

Sent from my HTC on the Now Network from Sprint!

 - Reply message -
From: "bruno" 
Date: Fri, Aug 5, 2011 5:26 am
Subject: [OSL | CCIE_Voice] how to make UCSInstall_UCOS_8.5.1.1-26 bootable
To: "CCIE-V邮件列表" 


  
 
 Hello all,
  I downloaded three files of UNREST version from cisco download , merged them 
and built an iso image however when trying to boot a vm machine on an esx UCS 
servers it complains and instead looking at DHCP for network location to find 
an image. This is when i am trying to boot it from local CD/DVD drive or from a 
loca storage source. Also what is confusing about these files is that in 
release notes for 8.5(1) it says this iso can be used for fresh new install as 
well as upgrade but then on : 
http://www.cisco.com/en/US/products/ps7273/prod_release_notes_list.html
page 4

Before You Begin
In Cisco Unified Communications Manager 8.5(1), the image available for 
download from Cisco.com is
a bootable image that can be burned to DVD and used for both upgrades and fresh 
installs. Cisco Unified
Communications Manager 8.5(1) upgrade DVDs ordered from Cisco are also bootable 
for use with
upgrades or fresh installs.

Then on page 8 it says :

Note Because the UCSInstall_UCOS_8.5.1.1-26 build specifies a nonbootable 
ISO, the build proves
useful only for upgrades. You cannot use this build for new installations.

it can boot on vmware but not esxi . 

I am still working to figure it if its really an issue with iso image i created 
or VMware.

i saw some post in internet ,ppl said we can make it bootable ,how to do it ?___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] how to make UCSInstall_UCOS_8.5.1.10000-26 bootable

[gwen...@gmail.com]

Have u tried to use the Cisco VMWare image file instead of generic. It can be 
downloaded from Wikipedia. Also I have done this and it worked no prob. You may 
not have names the ISO file correctly.

Sent from my HTC on the Now Network from Sprint!

- Reply message -
From: "bruno" 
Date: Fri, Aug 5, 2011 5:26 am
Subject: [OSL | CCIE_Voice] how to make UCSInstall_UCOS_8.5.1.1-26 bootable
To: "CCIE-V邮件列表" 

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] how to make UCSInstall_UCOS_8.5.1.10000-26 bootable

[bruno]

Hello all,
  I downloaded three files of UNREST version from cisco download , merged them 
and built an iso image however when trying to boot a vm machine on an esx UCS 
servers it complains and instead looking at DHCP for network location to find 
an image. This is when i am trying to boot it from local CD/DVD drive or from a 
loca storage source. Also what is confusing about these files is that in 
release notes for 8.5(1) it says this iso can be used for fresh new install as 
well as upgrade but then on : 
http://www.cisco.com/en/US/products/ps7273/prod_release_notes_list.html
page 4
 
Before You Begin
In Cisco Unified Communications Manager 8.5(1), the image available for 
download from Cisco.com is
a bootable image that can be burned to DVD and used for both upgrades and fresh 
installs. Cisco Unified
Communications Manager 8.5(1) upgrade DVDs ordered from Cisco are also bootable 
for use with
upgrades or fresh installs.
 
Then on page 8 it says :
 
Note Because the UCSInstall_UCOS_8.5.1.1-26 build specifies a nonbootable 
ISO, the build proves
useful only for upgrades. You cannot use this build for new installations.
 
it can boot on vmware but not esxi . 
 
I am still working to figure it if its really an issue with iso image i created 
or VMware.
 
i saw some post in internet ,ppl said we can make it bootable ,how to do it ?___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] how to make UCSInstall_UCOS_8.5.1.10000-26

[bruno]

Hello all,
  I downloaded three files of UNREST version from cisco download , merged them 
and built an iso image however when trying to boot a vm machine on an esx UCS 
servers it complains and instead looking at DHCP for network location to find 
an image. This is when i am trying to boot it from local CD/DVD drive or from a 
loca storage source. Also what is confusing about these files is that in 
release notes for 8.5(1) it says this iso can be used for fresh new install as 
well as upgrade but then on : 
http://www.cisco.com/en/US/products/ps7273/prod_release_notes_list.html
page 4
 
Before You Begin
In Cisco Unified Communications Manager 8.5(1), the image available for 
download from Cisco.com is
a bootable image that can be burned to DVD and used for both upgrades and fresh 
installs. Cisco Unified
Communications Manager 8.5(1) upgrade DVDs ordered from Cisco are also bootable 
for use with
upgrades or fresh installs.
 
Then on page 8 it says :
 
Note Because the UCSInstall_UCOS_8.5.1.1-26 build specifies a nonbootable 
ISO, the build proves
useful only for upgrades. You cannot use this build for new installations.
 
it can boot on vmware but not esxi . 
 
I am still working to figure it if its really an issue with iso image i created 
or VMware.
 
i saw some post in internet ,ppl said we can make it bootable ,how to do it ?
 
any input will be highly appreciated.___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com