Re: [OSL | CCIE_Voice] Intersite calls MOH
Thanks Vik. In my case moh from branch router started working for external users when ip multicasting enabled on switch.It seems when enabling multicasting on switch for both sites MOH started working between two location also. On Sun, Jan 22, 2012 at 12:54 PM, Vik Malhi vma...@ipexpert.com wrote: We set the VGW as a multicast server- so this works for IP phones and PSTN calls. You must ensure you specify the Voice SVI IP Address and Loopback address in the multicast moh route VlanXX LoXX statement within telephony-service/call-manager-fallback. Technically this is not multicast routing- there is no routing since the VGW is itself the MOH server. You can disable multicast-routing / PIM and it will still work. On Jan 18, 2012, at 8:34 AM, brajesh kumaR wrote: Hello, If branch site VGW configured for MOH multicast from branch router/VGW so will inter site IP calls ( two different location calls) will also get multicast from voice gateway or moh from multicast only works for external PSTN calls. Will on-net calls use VGW multicast MOH from flash?? During inter site calls I found following on VGW. Multicast IP showinng 0. Jan 18 14:40:52.381: moh_update_rtp: callID 55764 dstCallID 55765 Jan 18 14:40:52.381: moh_process_ccb: dstadr 0.0.0.0, callid 55765, port 0, codec 65535, moh_en 0, moh_addr 0.0.0.0 Jan 18 14:40:52.381: moh_update_rtp: callID 55764 dstCallID 55765 Jan 18 14:40:52.473: moh_update_rtp: callID 55764 dstCallID 55765 Jan 18 14:40:52.497: moh_process_ccb: dstadr 10.136.170.197, callid 55765, port 20650, User phone IP address : codec 5, moh_en 0, moh_addr 0.0.0.0 .Multicast address coming as 0. Jan 18 14:40:52.497: moh_update_rtp: callID 55764 dstCallID 55765 Jan 18 14:40:52: %ISDN-6-CONNECT: Interface Serial0/0/0:27 is now connected to 0170480054 N/A Jan 18 14:40:52.533: moh_update_rtp: callID 55764 dstCallID 55765 Jan 18 14:40:52.537: moh_process_ccb: dstadr 10.136.170.197, callid 55765, port 20650, codec 5, moh_en 0, moh_addr 0.0.0.0 Jan 18 14:40:52.537: moh_update_rtp: callID 55764 dstCallID 55765 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MGCP gateways
If you configure ccm-manager config, it will try to configure all 24/32 PRI ports, and if you are not using full PRI, then you have to manually disable unused PRI channels, and also configure the B channel maintenance in CUCM, so that after every reload the Router will not try to configure all PRI channel again. Bu if you are using manual MGCP configuration, you do not have such problem in case of fractional PRI. On Wed, Jan 25, 2012 at 5:08 PM, Chevy chevy.man...@gmail.com wrote: I just thought I'd ping everyone to see what your thoughts are on configuring an MGCP gateway manually vs using the ccm-manager config commands to download the xml file from the call manager. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Loading of CUCM7.0 -Publisher
Hi All, What is the correct procedure to install CUCM7-SubscriberI have installed the Publisher which 177.1.10.10 which is fine. But, when I install the Subscriber, it doesnt replicate properly. Shall I, after I installed the Pub, add the name Sub to the Server database and then install the Subscriber...Your feedback is appreciated..thnx. Cheers EA ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Loading of CUCM7.0 -Publisher
Yes!!! If you don't add the Subscriber server on Server page of CUCM, you won't be able to continue with the install. Your question is a little confusing... But if it is what I am thinking, then there is the answer. Just so we're clear, you're talking about the replication on INSTALLATION, right? *Emanuel Damasceno* CCNP Voice On Wed, Jan 25, 2012 at 8:57 PM, Errol Abrahams eabraham2...@gmail.comwrote: Hi All, What is the correct procedure to install CUCM7-SubscriberI have installed the Publisher which 177.1.10.10 which is fine. But, when I install the Subscriber, it doesnt replicate properly. Shall I, after I installed the Pub, add the name Sub to the Server database and then install the Subscriber...Your feedback is appreciated..thnx. Cheers EA ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Loading of CUCM7.0 -Publisher
Lol, Sorry, even I wasn't so clear. When we install Pub, it is the first in the cluster. Ok, that's fine. When we finish the installation of Publisher, we need to go to the pages and add the IP of what will be the subscriber, only then we start the installation of Subscriber... I hope I made sense this time :D *Emanuel Damasceno* CCNP Voice On Wed, Jan 25, 2012 at 9:25 PM, Emanuel Damasceno aedamasc...@gmail.comwrote: Yes!!! If you don't add the Subscriber server on Server page of CUCM, you won't be able to continue with the install. Your question is a little confusing... But if it is what I am thinking, then there is the answer. Just so we're clear, you're talking about the replication on INSTALLATION, right? *Emanuel Damasceno* CCNP Voice On Wed, Jan 25, 2012 at 8:57 PM, Errol Abrahams eabraham2...@gmail.comwrote: Hi All, What is the correct procedure to install CUCM7-SubscriberI have installed the Publisher which 177.1.10.10 which is fine. But, when I install the Subscriber, it doesnt replicate properly. Shall I, after I installed the Pub, add the name Sub to the Server database and then install the Subscriber...Your feedback is appreciated..thnx. Cheers EA ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
