[OSL | CCIE_Voice] TCL applied but when calling 4000 call disconnected...
guys see my applied config... when call 4000 is goes disconnected... what is issue? SiteC-RTR#sh run Building configuration... Current configuration : 10065 bytes ! ! Last configuration change at 11:17:36 HK Sun Jun 30 2013 ! NVRAM config last updated at 10:55:49 HK Sun Jun 30 2013 ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname SiteC-RTR ! boot-start-marker boot system flash:c2800nm-adventerprisek9-mz.124-22.T.bin warm-reboot boot-end-marker ! logging message-counter syslog logging buffered 4096 ! no aaa new-model memory-size iomem 20 clock timezone HK 8 network-clock-participate wic 0 no network-clock-participate wic 1 network-clock-select 1 E1 0/0/0 ! dot11 syslog ip source-route ! ! ip cef ip dhcp excluded-address 10.10.202.1 10.10.202.10 ip dhcp excluded-address 10.10.202.15 10.10.202.254 ! ip dhcp pool CME origin file flash:/ciscolab.txt default-router 10.10.202.1 option 150 ip 10.10.210.11 10.10.210.10 ! ! no ip domain lookup no ipv6 cef ! multilink bundle-name authenticated ! ! isdn switch-type primary-net5 ! ! ! voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! voice translation-rule 1 rule 1 // // type any unknown plan any isdn ! voice translation-rule 2 rule 1 // // type any subscriber plan any isdn ! voice translation-rule 3 rule 1 // // type any national plan any isdn ! voice translation-rule 4 rule 1 // // type any international plan any isdn ! voice translation-rule 5 rule 1 /.*\(4...\)/ /\1/ ! voice translation-rule 11 rule 1 /^3.../ /8522404/ type any national plan any isdn ! voice translation-rule 12 rule 1 /^3.../ /2404/ type any subscriber plan any isdn ! voice translation-rule 13 rule 1 /^3.../ /8522404/ type any national plan any isdn ! voice translation-rule 14 rule 1 /^3.../ /+8522404/ type any international plan any isdn ! voice translation-rule 67 rule 1 /^\*/ // ! ! voice translation-profile 911 translate calling 11 translate called 1 ! voice translation-profile did translate called 5 ! voice translation-profile int translate calling 14 translate called 4 ! voice translation-profile local translate calling 12 translate called 2 ! voice translation-profile national translate calling 13 translate called 3 ! voice translation-profile vm-redirect translate redirect-called 67 ! ! voice-card 0 dspfarm dsp services dspfarm ! ! application service app-b-acd-aa param voice-mail 4200 paramspace english index 0 param max-time-call-retry 700 param service-name callq param number-of-hunt-grps 1 param number-of-hunt-grps 1 param queue-len 10 param drop-through-option 1 paramspace english language en param handoff-string aa param max-time-vm-retry 2 param aa-hunt1 4500 paramspace english location flash: param aa-pilot 4000 param second-greeting-time 60 param drop-through-prompt _bacd_welcome.au param queue-manager-debugs 1 param call-retry-timer 15 ! ! ! ! ! ! archive log config hidekeys ! ! ! ! ! controller E1 0/0/0 pri-group timeslots 1-4,16 service mgcp ! controller E1 0/0/1 ! controller T1 0/1/0 framing esf linecode b8zs channel-group 0 timeslots 1-24 description WAN CONNECTION- DO NOT CHANGE ! ! ! ! ! interface Loopback0 ip address 10.10.110.3 255.255.255.255 ip ospf network point-to-point ! interface Loopback1 ip address 10.10.115.1 255.255.255.0 ip ospf network point-to-point ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface Service-Engine0/0 ip unnumbered Loopback1 service-module ip address 10.10.115.2 255.255.255.0 service-module ip default-gateway 10.10.115.1 ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/3/0 description not used - keep shutdown switchport trunk native vlan 301 switchport mode trunk switchport voice vlan 302 spanning-tree portfast ! interface FastEthernet0/3/1 description not used - keep shutdown switchport trunk native vlan 301 switchport mode trunk switchport voice vlan 302 spanning-tree portfast ! interface FastEthernet0/3/2 description BR2 Phone 1- 7962 phone switchport trunk native vlan 301 switchport mode trunk switchport voice vlan 302 spanning-tree portfast ! interface FastEthernet0/3/3 description BR2 Phone 2- 7962 phone switchport trunk native vlan 301 switchport mode trunk switchport voice vlan 302 spanning-tree portfast ! interface Serial0/0/0:15 no ip address encapsulation hdlc isdn switch-type primary-net5 isdn incoming-voice voice no cdp enable ! interface Serial0/1/0:0 no ip address encapsulation frame-relay IETF no fair-queue frame-relay lmi-type ansi ip rsvp bandwidth ! interface Serial0/1/0:0.1 point-to-point ip address 10.10.112.2 255.255.255.0 ip ospf mtu-ignore snmp trap link-status frame-relay interface-dlci 102 ip rsvp
Re: [OSL | CCIE_Voice] TCL applied but when calling 4000 call disconnected...
Amit, I would recommend that you verify your script. You can do so by going to the following link: ! http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bacd/configuration/guide/40bacd.html ! Cisco Unified CME Basic Automatic Call Distribution and Auto-Attendant Service (B-ACD) ! ! Your script is missing service app-b-acd with duplicates and other errors and your calling a non-existent service-name callq. ! You will need to know how to find this link for writing BACD scripts: Products Voice and Unified Communications IP Telephony Unified Communications Platform Cisco Unified Communications Manager Express Configure Configuration Guides Cisco Unified CME B-ACD and Tcl Call-Handling Applications Cisco Unified CME Basic Automatic Call Distribution and Auto-Attendant Service (B-ACD) ! See the following sections: Embedded Call-Queue and AA Tcl Scripts: Example (You can use this script and modify) Cisco Unified CME B-ACD with Drop-Through Option: Example (add parameters from the drop through example) ! In addition you don't need the following POTS dial-peer just the VoIP dial-peer will do: dial-peer voice 1000 pots service app-b-acd-aa incoming called-number 4000 ! Amit I know when I first started my journey BACD was very difficult for me and confusing until I found this link. ! Hope this helps you out. ! Michael Sears, CCIE(V)#38404 Designing and Implementing Cisco Unified Communications on Unified Computing Systems ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends?
Hi All, I don't know what to say or whom to complain to? This's the second day I'm having difficulty in working in my online sessions with Proctorlabs vracks. I contacted supp...@ipexpert.com and supp...@proctorlabs.com and afterhours support but no one answering Yesterday I asked the support if I can extend my current session by booking a new following session but no one answered. I tried booking a new following session hoping it will be linked up automatically but unfortunately it didn't. So after that I had to stop my work after feeling frustrated. Today I booked three consecutive sessions but the same problem happened again but in a different form. I noticed the remaining time is 3 hrs and 40 minutes in the first session and informed the support guys but no one is answering. After finishing my first session, I thought it will be disconnected but the remaining time changed to 24 hours. Okay feeling happy with the new hours but then maybe after about 30 minutes I found my telnet session got disconnected and I can't access them or access the servers and after refreshing my account at Proctorlabs site , I found the pod has changed. So means everything has gone. The sessions were not linked-up as what they told us. I just wonder whom to complain in such cases? BTW,I also schedule sessions in the other competitor company vracks but to say the truth I found their support and response are very good. Not only that but they gave me back my credits and more. Thanks for any help and regards. Khaled Al-Saholy ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends?
All, I had a very frustrating session this morning. I could not login to the Publisher, even though I could connect with the browser. Didn't work in IE or Firefox. I could log into the subscriber but saw that there was a configuration already loaded. When I tried to save any changes, just got 'Connecting' in the browser, no further. Never could do anything with CallManager. I reverted and loaded two other labs, same issue. It seems the Pod29 was extremely messed up. Saturday's session loaded a completely different lab from the one I requested. Had to revert and load again, 25 minutes down the drain. Proctorlabs Support, I am requesting two vouchers for the 8 hour session that I couldn't work on. There are some serious bugs in your lab gear. Regards, Dane Warner, CCVP Sr. Network Engineer Epoch Universal, Inc. (909)226-0755 dwar...@epochuniversal.commailto:dwar...@epochuniversal.com [cid:image001.png@01CE7588.7983B5C0] From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of khaled Saholy Sent: Sunday, June 30, 2013 11:08 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends? Hi All, I don't know what to say or whom to complain to? This's the second day I'm having difficulty in working in my online sessions with Proctorlabs vracks. I contacted supp...@ipexpert.commailto:supp...@ipexpert.com and supp...@proctorlabs.commailto:supp...@proctorlabs.com and afterhours support but no one answering Yesterday I asked the support if I can extend my current session by booking a new following session but no one answered. I tried booking a new following session hoping it will be linked up automatically but unfortunately it didn't. So after that I had to stop my work after feeling frustrated. Today I booked three consecutive sessions but the same problem happened again but in a different form. I noticed the remaining time is 3 hrs and 40 minutes in the first session and informed the support guys but no one is answering. After finishing my first session, I thought it will be disconnected but the remaining time changed to 24 hours. Okay feeling happy with the new hours but then maybe after about 30 minutes I found my telnet session got disconnected and I can't access them or access the servers and after refreshing my account at Proctorlabs site , I found the pod has changed. So means everything has gone. The sessions were not linked-up as what they told us. I just wonder whom to complain in such cases? BTW,I also schedule sessions in the other competitor company vracks but to say the truth I found their support and response are very good. Not only that but they gave me back my credits and more. Thanks for any help and regards. Khaled Al-Saholy No virus found in this message. Checked by AVG - www.avg.comhttp://www.avg.com Version: 2013.0.3345 / Virus Database: 3204/6445 - Release Date: 06/27/13 inline: image001.png___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends?
hi khaled, you are not alone, i have 3 session with them this week, all of them issue and i can not open the ticket , looks like they disable it so frustrate K From: khaled Saholy khaled_sah...@hotmail.com To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Sunday, June 30, 2013 12:07:50 PM Subject: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends? Hi All, I don't know what to say or whom to complain to? This's the second day I'm having difficulty in working in my online sessions with Proctorlabs vracks. I contacted supp...@ipexpert.com and supp...@proctorlabs.com and afterhours support but no one answering Yesterday I asked the support if I can extend my current session by booking a new following session but no one answered. I tried booking a new following session hoping it will be linked up automatically but unfortunately it didn't. So after that I had to stop my work after feeling frustrated. Today I booked three consecutive sessions but the same problem happened again but in a different form. I noticed the remaining time is 3 hrs and 40 minutes in the first session and informed the support guys but no one is answering. After finishing my first session, I thought it will be disconnected but the remaining time changed to 24 hours. Okay feeling happy with the new hours but then maybe after about 30 minutes I found my telnet session got disconnected and I can't access them or access the servers and after refreshing my account at Proctorlabs site , I found thepod has changed. So means everything has gone. The sessions were not linked-up as what they told us. I just wonder whom to complain in such cases? BTW,I also schedule sessions in the other competitor company vracks but to say the truth I found their support and response are very good. Not only that but they gave me back my credits and more. Thanks for any help and regards. Khaled Al-Saholy ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] OWLE load from proctorlab
hi all, i load OWLE Wb 1 from proctorlab in my session. Here is config they load, but my CUE is not reachable from HQ and other site. (however is reachble to SC only) . is there tshoot they inject or what i miss here? --- interface Loopback0 ip address 10.10.110.3 255.255.255.255 ip ospf network point-to-point end interface Service-Engine0/0 ip unnumbered Loopback0 service-module ip address 10.10.110.253 255.255.255.0 service-module ip default-gateway 10.10.110.3 end ip route 10.10.110.253 255.255.255.255 Service-Engine0/0___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends?
i can not power up most server and sometimes vpn also failed to work. but when u open ticket , suppprt usually our end is good , please check your side. From: Dane Warner dwar...@epochuniversal.com To: khaled Saholy khaled_sah...@hotmail.com; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Cc: support (supp...@ipexpert.com) supp...@ipexpert.com; supp...@proctorlabs.com supp...@proctorlabs.com Sent: Sunday, June 30, 2013 1:07:41 PM Subject: Re: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends? All, I had a very frustrating session this morning. I could not login to the Publisher, even though I could connect with the browser. Didn’t work in IE or Firefox. I could log into the subscriber but saw that there was a configuration already loaded. When I tried to save any changes, just got ‘Connecting’ in the browser, no further. Never could do anything with CallManager. I reverted and loaded two other labs, same issue. It seems the Pod29 was extremely messed up. Saturday’s session loaded a completely different lab from the one I requested. Had to revert and load again, 25 minutes down the drain. Proctorlabs Support, I am requesting two vouchers for the 8 hour session that I couldn’t work on. There are some serious bugs in your lab gear. Regards, Dane Warner, CCVP Sr. Network Engineer Epoch Universal, Inc. (909)226-0755 dwar...@epochuniversal.com From:ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of khaled Saholy Sent: Sunday, June 30, 2013 11:08 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends? Hi All, I don't know what to say or whom to complain to? This's the second day I'm having difficulty in working in my online sessions with Proctorlabs vracks. I contacted supp...@ipexpert.com and supp...@proctorlabs.com and afterhours support but no one answering Yesterday I asked the support if I can extend my current session by booking a new following session but no one answered. I tried booking a new following session hoping it will be linked up automatically but unfortunately it didn't. So after that I had to stop my work after feeling frustrated. Today I booked three consecutive sessions but the same problem happened again but in a different form. I noticed the remaining time is 3 hrs and 40 minutes in the first session and informed the support guys but no one is answering. After finishing my first session, I thought it will be disconnected but the remaining time changed to 24 hours. Okay feeling happy with the new hours but then maybe after about 30 minutes I found my telnet session got disconnected and I can't access them or access the servers and after refreshing my account at Proctorlabs site , I found thepod has changed. So means everything has gone. The sessions were not linked-up as what they told us. I just wonder whom to complain in such cases? BTW,I also schedule sessions in the other competitor company vracks but to say the truth I found their support and response are very good. Not only that but they gave me back my credits and more. Thanks for any help and regards. Khaled Al-Saholy No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.3345 / Virus Database: 3204/6445 - Release Date: 06/27/13 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] OWLE load from proctorlab
Hi Karen, You can use the other loopback 1 address (10.10.115.0/24) . The problem is related to the mask. int lo 1 ip add 10.10.115.1 255.255.255.0 ip ospf net point-to-po int ser 0/0 ip unnum lo 1 service-modul ip add 10.10.115.2 255.255.255.0 service-module ip default-gateway 10.10.115.1 no sh ip route 10.10.115.2 255.255.255.255 ser0/0 Regards. Khaled Date: Sun, 30 Jun 2013 12:52:56 -0700 From: karen.johnson...@yahoo.ca To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] OWLE load from proctorlab hi all, i load OWLE Wb 1 from proctorlab in my session. Here is config they load, but my CUE is not reachable from HQ and other site. (however is reachble to SC only) . is there tshoot they inject or what i miss here? --- interface Loopback0 ip address 10.10.110.3 255.255.255.255 ip ospf network point-to-point end interface Service-Engine0/0 ip unnumbered Loopback0 service-module ip address 10.10.110.253 255.255.255.0 service-module ip default-gateway 10.10.110.3 end ip route 10.10.110.253 255.255.255.255 Service-Engine0/0 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] OWLE load from proctorlab
hi khalid, do u mean when i change mask of loopback 0 , it will fix the issue too ? - what is the right procedure to do after change the ip address os service-engine 0/0 do i need to do ser ser 0/0 reload or ser ser 0/0 reset so that CUE can pick up the new ip address ? i heard we need to do 2 times due to the bug in CUE , is that true? tks K From: khaled Saholy khaled_sah...@hotmail.com To: Karen Johnson karen.johnson...@yahoo.ca; CCIE Study ccie_voice@onlinestudylist.com Sent: Sunday, June 30, 2013 2:31:22 PM Subject: RE: [OSL | CCIE_Voice] OWLE load from proctorlab Hi Karen, You can use the other loopback 1 address (10.10.115.0/24) . The problem is related to the mask. int lo 1 ip add 10.10.115.1 255.255.255.0 ip ospf net point-to-po int ser 0/0 ip unnum lo 1 service-modul ip add 10.10.115.2 255.255.255.0 service-module ip default-gateway 10.10.115.1 no sh ip route 10.10.115.2 255.255.255.255 ser0/0 Regards. Khaled Date: Sun, 30 Jun 2013 12:52:56 -0700 From: karen.johnson...@yahoo.ca To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] OWLE load from proctorlab hi all, i load OWLE Wb 1 from proctorlab in my session. Here is config they load, but my CUE is not reachable from HQ and other site. (however is reachble to SC only) . is there tshoot they inject or what i miss here? --- interface Loopback0 ip address 10.10.110.3 255.255.255.255 ip ospf network point-to-point end interface Service-Engine0/0 ip unnumbered Loopback0 service-module ip address 10.10.110.253 255.255.255.0 service-module ip default-gateway 10.10.110.3 end ip route 10.10.110.253 255.255.255.255 Service-Engine0/0 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Clocking for GW
hi folks, when we were asked to do below : what is the right command and verification? Take clocking for Layer 1 from Network side. Your PRI clocking of layer 2 should be user side. Ktks___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] All Labs Table and Proctor Labs Vlahs
In setting up my sessions I've noticed the it doesn't appear that when you pre-load the configuration the proctor labs vlans match up with the vlan naming convention as to what's in the all labs table on the ipexpert site. Such as in all labs table hq server vlan is 30, but on preloaded config vlan is 103. Ip subnet matches up but vlan ID does not. Is this by design? If so, should I chang the vlan tag in the actual lab? Thanks, Alex ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] L2 overhead for QoS
Thanks, there is note from Mark Snow in one of these links that clears it up. Moreover, Cisco360 labs are using 10 bytes for frf.12 (including crc). Aman Kapuria From: Somphol Boonjing [mailto:somp...@gmail.com] Sent: Friday, 28 June 2013 3:57 PM To: Kapuria, Aman Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] L2 overhead for QoS Hi Aman, In case this help, the topic seems to be discussed before. E.g. in the following thread. - http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg06632.html - http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg31952.html Regards, --Somphol. On Fri, Jun 28, 2013 at 10:10 AM, Kapuria, Aman aman.kapu...@team.telstra.commailto:aman.kapu...@team.telstra.com wrote: Anyone? Aman From: Kapuria, Aman Sent: Wednesday, 26 June 2013 3:31 PM To: ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com Subject: L2 overhead for QoS Hi All, What L2 overhead do you use for frf.12 and MLP when you calculate number of calls over a link? Different providers have different approach around this. QoS SRND says Frame Relay adds 4 bytes of Layer 2 overhead; Frame Relay with FRF.12 adds 8 bytes. With frf.12 voice packets don't get fragmented, so do you use 4 bytes for your calculation or 12 or some other number? For those who have done this in lab and got 100% for QoS, can they please advise what value they used? Thanks in advance Aman ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.comhttp://www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.comhttp://www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] All Labs Table and Proctor Labs Vlahs
i think they try to mimic exam vlan From: Alex Pishko alexpis...@yahoo.com To: CCIE Lab Study List ccie_voice@onlinestudylist.com Sent: Sunday, June 30, 2013 6:38:23 PM Subject: [OSL | CCIE_Voice] All Labs Table and Proctor Labs Vlahs In setting up my sessions I've noticed the it doesn't appear that when you pre-load the configuration the proctor labs vlans match up with the vlan naming convention as to what's in the all labs table on the ipexpert site. Such as in all labs table hq server vlan is 30, but on preloaded config vlan is 103. Ip subnet matches up but vlan ID does not. Is this by design? If so, should I chang the vlan tag in the actual lab? Thanks, Alex ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] max session conference and xcode
hi folks, when we configure conference and transcode. - what is the max session count based on ? I assume for transcode is the cti port for UCCX and CUE, any other consideration? - how about for the conference session ? tks K___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] OWLE load from proctorlab
Hi Karen, Loopback 0 subnet mask is /32 so it's only one host. If you want to test this idea, try using another interface like voice vlan interface or a new loopback interface with /24 mask. For changing the ip address of the cue after it's been up, I think you need to reload the cue. I haven't experiment this myself but this is what I hear and one time reload for this is enough. I remember one time in proctor labs , I couldn't reach R3 lo0 as the ntp server during the cue wizard and I had to reload the cue once , then it worked. Regards. Khaled Date: Sun, 30 Jun 2013 16:26:23 -0700 From: karen.johnson...@yahoo.ca Subject: Re: [OSL | CCIE_Voice] OWLE load from proctorlab To: khaled_sah...@hotmail.com; ccie_voice@onlinestudylist.com hi khalid, do u mean when i change mask of loopback 0 , it will fix the issue too ? - what is the right procedure to do after change the ip address os service-engine 0/0 do i need to do ser ser 0/0 reload or ser ser 0/0 reset so that CUE can pick up the new ip address ? i heard we need to do 2 times due to the bug in CUE , is that true? tks K From: khaled Saholy khaled_sah...@hotmail.com To: Karen Johnson karen.johnson...@yahoo.ca; CCIE Study ccie_voice@onlinestudylist.com Sent: Sunday, June 30, 2013 2:31:22 PM Subject: RE: [OSL | CCIE_Voice] OWLE load from proctorlab Hi Karen, You can use the other loopback 1 address (10.10.115.0/24) . The problem is related to the mask. int lo 1 ip add 10.10.115.1 255.255.255.0 ip ospf net point-to-po int ser 0/0 ip unnum lo 1 service-modul ip add 10.10.115.2 255.255.255.0 service-module ip default-gateway 10.10.115.1 no sh ip route 10.10.115.2 255.255.255.255 ser0/0 Regards. Khaled Date: Sun, 30 Jun 2013 12:52:56 -0700 From: karen.johnson...@yahoo.ca To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] OWLE load from proctorlab hi all, i load OWLE Wb 1 from proctorlab in my session. Here is config they load, but my CUE is not reachable from HQ and other site. (however is reachble to SC only) . is there tshoot they inject or what i miss here? --- interface Loopback0 ip address 10.10.110.3 255.255.255.255 ip ospf network point-to-point end interface Service-Engine0/0 ip unnumbered Loopback0 service-module ip address 10.10.110.253 255.255.255.0 service-module ip default-gateway 10.10.110.3 end ip route 10.10.110.253 255.255.255.255 Service-Engine0/0 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Single Alert in RTMT for MGCP when PRI Channel is Down
Dear Experts, I would like to configure a single alert when MGCP PRI Channel is down to be sent to a specific email. I know how to configure it by going to RTMT --- Alert Central -- MGCPDCHANNEL is down --- Set Alert/Propertis but I don't know how to make a single alert to avoid excessive e-mail? Kindly , Please advise Thanks, Hesham ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] IPCC extension not showing in CUCM a nd also not showing rmcm user
guys, anyone using proctor lab and use this issue? iPCC extension not showing... rmcm not showing under cucm? how can fix it? -- Thanks Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
