Re: [OSL | CCIE_Voice] Access list for cue traffic marking
Hello, you can use something like this: access-list 101 permit tcp host a.b.c.d any eq 2748 ! class-map match-all cti-qbe match access-group 101 ! policy-map cti-qbe class cti-qbe set dscp af31 bandwidth 20 ! interface Serial0/1 service-policy output cti-qbe On Sun, Jul 7, 2013 at 6:06 AM, Piyush Jain jainpiyush2...@ymail.comwrote: Hi Guys, I am trying to understand how we can mark CUE traffic on HQ Switch to implement LAN QOS. I have come up with the below solution. ip access-list extended name CUE permit tcp host 142.100.64.12 host 142.1.66.253 eq 2748 class-map match-any CUE-CLASS match access group name CUE policy-map CUE-POLICY class CUE-CLASS set ip dhcp CS3 int fa 1/0/4 description * CONNECTED TO SUB CUCM *** service policy input CUE-POLICY In above config, 142.100.64.12 is SUB CUCM, 142.1.66.253 is CUE on SC router. Explanation: Since we are applying service policy in incoming direction on switch port connected to CUCM, so the source port number (of CUCM) can be anything but destination port number (i.e for CUE) should be 2748 (JTAPI port). Any advice or inputs are most welcome. Cheers !! Piyush Jain ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Access list for cue traffic marking
Guys , Get the biggest relief in your life. If you see this CUE QOS question just give it up. No one has ever scored that CUE Switch QOS and many people tried different things. My only advice give it up completely and never waste ur time or energy solving it. That particular lab is very long and if you have 2 hours left then try to play with it and enjoy. Knowing that the guys who passed this lab still didn't score that question in particular. In order for that question to be solved that needs to be consulted to a very knowledgable Routing and Switching . SP and Voice simultaneously even though the Cisco grading would be different than the real realistic world. To conclude , Never waste ur time or energy solve this stupid question trust me. Your passing score is 80% and this stupid question could be about 4% of the whole test. I know for fact that every minor mark counts in the total but its really up to the destiny. To me CCIE Test is no longer a test that you are real knowledgable or not. I definitely believe 100% CCIE test is like a gambling game , Jackpot or a roulette in LAS VEGAS. Don't have the faith that this thing is graded fairly with a standard. On 7 July 2013 02:25, LorenzLGRC lorenzl...@gmail.com wrote: Hello, you can use something like this: access-list 101 permit tcp host a.b.c.d any eq 2748 ! class-map match-all cti-qbe match access-group 101 ! policy-map cti-qbe class cti-qbe set dscp af31 bandwidth 20 ! interface Serial0/1 service-policy output cti-qbe On Sun, Jul 7, 2013 at 6:06 AM, Piyush Jain jainpiyush2...@ymail.comwrote: Hi Guys, I am trying to understand how we can mark CUE traffic on HQ Switch to implement LAN QOS. I have come up with the below solution. ip access-list extended name CUE permit tcp host 142.100.64.12 host 142.1.66.253 eq 2748 class-map match-any CUE-CLASS match access group name CUE policy-map CUE-POLICY class CUE-CLASS set ip dhcp CS3 int fa 1/0/4 description * CONNECTED TO SUB CUCM *** service policy input CUE-POLICY In above config, 142.100.64.12 is SUB CUCM, 142.1.66.253 is CUE on SC router. Explanation: Since we are applying service policy in incoming direction on switch port connected to CUCM, so the source port number (of CUCM) can be anything but destination port number (i.e for CUE) should be 2748 (JTAPI port). Any advice or inputs are most welcome. Cheers !! Piyush Jain ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Cue call failed in srst mode
Hi folks, My cue is working fine in normal mode. If i switch to srst mode it failed and busy tone. Dialpeer and codec g711 , sip-ua ip show correct. any idea what to tshoot and command to check? K ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Cue call failed in srst mode
Do you have the voicemail command under telephony-service? Hath Rc On Jul 7, 2013, at 11:04 AM, Karen Johnson karen.johnson...@yahoo.ca wrote: Hi folks, My cue is working fine in normal mode. If i switch to srst mode it failed and busy tone. Dialpeer and codec g711 , sip-ua ip show correct. any idea what to tshoot and command to check? K From: sanity insanity networksanitytoinsan...@gmail.com; To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com; Subject: [OSL | CCIE_Voice] CME srst best practices.. Sent: Sat, Jul 6, 2013 4:29:43 PM hi Guys, In srst I use the following config... telephony-service srst mode auto-provision all srst dn line-mode octo 1)Do I also need to configure srst dn template srst ephone template ? 2)what are best practices for setting up the cue in srst mode ? If possible include details of.. -mwi -Xfer to VM - button 6 of phone 1 is pressed -MJ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Cue call failed in srst mode
I just ran into this today. You have jtapi triggers built in cue. They need to be there for ccm integration, but also make sure you set the ccn trigger under sip if using CLI configuration. If you are using web interface under the triggers, check the box for srst. Brian On Jul 7, 2013 2:34 PM, Karen Johnson karen.johnson...@yahoo.ca wrote: Hi folks, My cue is working fine in normal mode. If i switch to srst mode it failed and busy tone. Dialpeer and codec g711 , sip-ua ip show correct. any idea what to tshoot and command to check? K -- * From: * sanity insanity networksanitytoinsan...@gmail.com; * To: * ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com; * Subject: * [OSL | CCIE_Voice] CME srst best practices.. * Sent: * Sat, Jul 6, 2013 4:29:43 PM hi Guys, In srst I use the following config... telephony-service srst mode auto-provision all srst dn line-mode octo 1)Do I also need to configure srst dn template srst ephone template ? 2)what are best practices for setting up the cue in srst mode ? If possible include details of.. -mwi -Xfer to VM - button 6 of phone 1 is pressed -MJ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Changing CUCM IP address on Cisco Presence
on CUPS goto system cucm publisher and change the publisher ip address for sure it will reset all the services, but will change the ip address. hope thats what you were looking for. Regards, -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Daniel Gomez Sent: Sunday, July 07, 2013 9:38 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Changing CUCM IP address on Cisco Presence Hello, Does anybody know if there's any guide showing the procedure to change CUCM IP address on a presence server. CUCM IP address has to change and therefore we need to change it on presence server. Regards, Daniel Gómez Quijada danie...@gmail.com Sent from my iPhone ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Cue call failed in srst mode
Yes___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Access list for cue traffic marking
Hi, Forgive me to chime in and most likely this won't answer the original question outright. Hesham's response is fairly inspiring in a way. It inspires me think a lot harder about this area. - Take another closer look at what is available, it is intriguing to see Layer 3 information such as IP Address header is now being inspected at a Layer 2 port through access-list and MQC. This is similar to the fact that Switch are now able to mare/re-mark DSCP which is at the IP header level. In all cases, it is likely to be a very simple IP header inspection and won't be able to do the full Layer 7 inspection. - Traffic classification when apply to Switch port, it will be subject to being [1] a very simply packet filtering tool such as access-list [2] different based on the direction.i.e. access-list to catch incoming traffic to device connecting to the switch vs the access-list to catch outgoing traffic from that device is going to be asymmetric. - If I would want to test the knowledge of traffic flow, while I can put the actual wording of the requirement differently, the core of the question would be Do you know all or some of the *incoming* traffic that flow from such as such to the rest of the infrastructure OR to a certain component of the infrastructure? With a simple twist, the question can be slightly changed to ask. Do you know all or some of the *outgoing* traffic that flow from such as such to the rest of the infrastructure OR to a certain component of the infrastructure? Now, replace such as such with: - CUCM Publisher - CUCM Subscriber - CUE - CUC Server - UCCX Server - CUPS Server - H323 Gateways - H323 Gatekeepers - IOS-based Media Resources - DHCP Server - TFTP Server - IP Phones - Attendant Console workstation - Agent Desktop workstation - CUPC Client Based on these basic ingredient, I guess someone can make a large set of exam bank out of it. This sort of question will be hard to crack if someone comes across a variation of it for the first time in the lab.It would be even harder to crack if someone try to memorize a set of access-list without really understand why it is the way it is. i.e. when to use access-list 101 tcp any any host x.x.x.x 2000 vs access-list 101 tcp host x.x.x.x 2000 any any. I don't dispute the probability of unreasonableness of the grading process itself, but this could also be a sound explanation of why it is very hard to crack. Regards, --Somphol. On Sun, Jul 7, 2013 at 8:38 PM, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Guys , Get the biggest relief in your life. If you see this CUE QOS question just give it up. No one has ever scored that CUE Switch QOS and many people tried different things. My only advice give it up completely and never waste ur time or energy solving it. That particular lab is very long and if you have 2 hours left then try to play with it and enjoy. Knowing that the guys who passed this lab still didn't score that question in particular. In order for that question to be solved that needs to be consulted to a very knowledgable Routing and Switching . SP and Voice simultaneously even though the Cisco grading would be different than the real realistic world. To conclude , Never waste ur time or energy solve this stupid question trust me. Your passing score is 80% and this stupid question could be about 4% of the whole test. I know for fact that every minor mark counts in the total but its really up to the destiny. To me CCIE Test is no longer a test that you are real knowledgable or not. I definitely believe 100% CCIE test is like a gambling game , Jackpot or a roulette in LAS VEGAS. Don't have the faith that this thing is graded fairly with a standard. On 7 July 2013 02:25, LorenzLGRC lorenzl...@gmail.com wrote: Hello, you can use something like this: access-list 101 permit tcp host a.b.c.d any eq 2748 ! class-map match-all cti-qbe match access-group 101 ! policy-map cti-qbe class cti-qbe set dscp af31 bandwidth 20 ! interface Serial0/1 service-policy output cti-qbe On Sun, Jul 7, 2013 at 6:06 AM, Piyush Jain jainpiyush2...@ymail.comwrote: Hi Guys, I am trying to understand how we can mark CUE traffic on HQ Switch to implement LAN QOS. I have come up with the below solution. ip access-list extended name CUE permit tcp host 142.100.64.12 host 142.1.66.253 eq 2748 class-map match-any CUE-CLASS match access group name CUE policy-map CUE-POLICY class CUE-CLASS set ip dhcp CS3 int fa 1/0/4 description * CONNECTED TO SUB CUCM *** service policy input CUE-POLICY In above config, 142.100.64.12 is SUB CUCM, 142.1.66.253 is CUE on SC router. Explanation: Since we are applying service policy in incoming direction on switch port connected to CUCM, so the source port number (of CUCM) can be anything but destination port number (i.e for CUE) should be 2748 (JTAPI port). Any advice or inputs are most welcome.
Re: [OSL | CCIE_Voice] Access list for cue traffic marking
Maybe I am missing something so please forgive me, and to recap, the question was LAN QoS and CUE (not WAN).The example below (which is pretty much out of the SRND) will correctly mark the traffic, but only going out the serial port. It seems to me that you would want to mark the traffic inbound from the CUE module to the router in which it resides so that no matter how the traffic exits the router it will be handled correctly. Can you mark the traffic as it leaves the AIM module and is passed to the router? As far as the policy map on the serial port, wouldn't we want to see all traffic correctly prioritized not just the CTI-QBE to answer the question correctly if we were to look at the WAN QoS?I assume for traffic leaving on an LAN port to a switch, the switch would have the appropriate trust statements and since we marked on the packets as they transition from the AIM to the router prioritization and re-marking would not be an issue?Steve Original Message Subject: Re: [OSL | CCIE_Voice] Access list for cue traffic marking From: LorenzLGRC lorenzl...@gmail.com Date: Sun, July 07, 2013 5:25 am To: Piyush Jain jainpiyush2...@ymail.com Cc: "ccie_voice@onlinestudylist.com" ccie_voice@onlinestudylist.com Hello,you can use something like this:access-list 101 permit tcp host a.b.c.d any eq 2748 ! class-map match-all cti-qbe match access-group 101 ! policy-map cti-qbe class cti-qbe set dscp af31 bandwidth 20 ! interface Serial0/1 service-policy output cti-qbeOn Sun, Jul 7, 2013 at 6:06 AM, Piyush Jain jainpiyush2...@ymail.com wrote: Hi Guys, I am trying to understand how we can mark CUE traffic on HQ Switch to implement LAN QOS. I have come up with the below solution. ip access-list extended name CUEpermit tcp host 142.100.64.12 host 142.1.66.253 eq 2748 class-map match-any CUE-CLASS match access group name CUE policy-map CUE-POLICYclass CUE-CLASS set ip dhcp CS3 int fa 1/0/4description * CONNECTED TO SUB CUCM *** service policy input CUE-POLICY In above config, 142.100.64.12 is SUB CUCM, 142.1.66.253 is CUE on SC router.Explanation: Since we are applying service policy in incoming direction on switch port connected to CUCM, so the source port number (of CUCM) can be anything but destination port number (i.e for CUE) should be 2748 (JTAPI port). Any advice or inputs are most welcome.Cheers !!Piyush Jain ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Cue call failed in srst mode
Dial peer and trigger On Jul 7, 2013, at 4:22 PM, Karen Johnson karen.johnson...@yahoo.ca wrote: Yes From: Rrcrumm rrcr...@yahoo.com; To: Karen Johnson karen.johnson...@yahoo.ca; Cc: sanity insanity networksanitytoinsan...@gmail.com; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com; Subject: Re: [OSL | CCIE_Voice] Cue call failed in srst mode Sent: Sun, Jul 7, 2013 6:49:41 PM Do you have the voicemail command under telephony-service? Hath Rc On Jul 7, 2013, at 11:04 AM, Karen Johnson karen.johnson...@yahoo.ca wrote: Hi folks, My cue is working fine in normal mode. If i switch to srst mode it failed and busy tone. Dialpeer and codec g711 , sip-ua ip show correct. any idea what to tshoot and command to check? K From: sanity insanity networksanitytoinsan...@gmail.com; To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com; Subject: [OSL | CCIE_Voice] CME srst best practices.. Sent: Sat, Jul 6, 2013 4:29:43 PM hi Guys, In srst I use the following config... telephony-service srst mode auto-provision all srst dn line-mode octo 1)Do I also need to configure srst dn template srst ephone template ? 2)what are best practices for setting up the cue in srst mode ? If possible include details of.. -mwi -Xfer to VM - button 6 of phone 1 is pressed -MJ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Access list for cue traffic marking
Steve, you absolutely make sense that traffic for cue can be marked on router (site c) on which cue module is connected when it goes out on wan link.. and then on the trunk port on hq switch we would have trust statement. However the question in lab expect us to mark the cue traffic on hq switch on the port connected to sub cucm.. so the above solution won't work.. right? Thanks and regards, Piyush Jain Sent from my android device. -Original Message- From: sbar...@mystictraveler.net To: LorenzLGRC lorenzl...@gmail.com, Piyush Jain jainpiyush2...@ymail.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Mon, 08 Jul 2013 6:23 AM Subject: RE: [OSL | CCIE_Voice] Access list for cue traffic marking Maybe I am missing something so please forgive me, and to recap, the question was LAN QoS and CUE (not WAN). The example below (which is pretty much out of the SRND) will correctly mark the traffic, but only going out the serial port. It seems to me that you would want to mark the traffic inbound from the CUE module to the router in which it resides so that no matter how the traffic exits the router it will be handled correctly. Can you mark the traffic as it leaves the AIM module and is passed to the router? As far as the policy map on the serial port, wouldn't we want to see all traffic correctly prioritized not just the CTI-QBE to answer the question correctly if we were to look at the WAN QoS? I assume for traffic leaving on an LAN port to a switch, the switch would have the appropriate trust statements and since we marked on the packets as they transition from the AIM to the router prioritization and re-marking would not be an issue? Steve Original Message Subject: Re: [OSL | CCIE_Voice] Access list for cue traffic marking From: LorenzLGRC lorenzl...@gmail.com Date: Sun, July 07, 2013 5:25 am To: Piyush Jain jainpiyush2...@ymail.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Hello, you can use something like this: access-list 101 permit tcp host a.b.c.d any eq 2748 ! class-map match-all cti-qbe match access-group 101 ! policy-map cti-qbe class cti-qbe set dscp af31 bandwidth 20 ! interface Serial0/1 service-policy output cti-qbe On Sun, Jul 7, 2013 at 6:06 AM, Piyush Jain jainpiyush2...@ymail.com wrote: Hi Guys, I am trying to understand how we can mark CUE traffic on HQ Switch to implement LAN QOS. I have come up with the below solution. ip access-list extended name CUE permit tcp host 142.100.64.12 host 142.1.66.253 eq 2748 class-map match-any CUE-CLASS match access group name CUE policy-map CUE-POLICY class CUE-CLASS set ip dhcp CS3 int fa 1/0/4 description * CONNECTED TO SUB CUCM *** service policy input CUE-POLICY In above config, 142.100.64.12 is SUB CUCM, 142.1.66.253 is CUE on SC router. Explanation: Since we are applying service policy in incoming direction on switch port connected to CUCM, so the source port number (of CUCM) can be anything but destination port number (i.e for CUE) should be 2748 (JTAPI port). Any advice or inputs are most welcome. Cheers !! Piyush Jain ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Cue call failed in srst mode
Have you configured ccn subsystem and trigger for sip on cue? Thanks and regards, Piyush Jain Sent from my android device. -Original Message- From: Rrcrumm rrcr...@yahoo.com To: Karen Johnson karen.johnson...@yahoo.ca Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com, sanity insanity networksanitytoinsan...@gmail.com Sent: Mon, 08 Jul 2013 8:10 AM Subject: Re: [OSL | CCIE_Voice] Cue call failed in srst mode Dial peer and trigger On Jul 7, 2013, at 4:22 PM, Karen Johnson karen.johnson...@yahoo.ca wrote: Yes From: Rrcrumm rrcr...@yahoo.com; To: Karen Johnson karen.johnson...@yahoo.ca; Cc: sanity insanity networksanitytoinsan...@gmail.com; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com; Subject: Re: [OSL | CCIE_Voice] Cue call failed in srst mode Sent: Sun, Jul 7, 2013 6:49:41 PM Do you have the voicemail command under telephony-service? Hath Rc On Jul 7, 2013, at 11:04 AM, Karen Johnson karen.johnson...@yahoo.ca wrote: Hi folks, My cue is working fine in normal mode. If i switch to srst mode it failed and busy tone. Dialpeer and codec g711 , sip-ua ip show correct. any idea what to tshoot and command to check? K From: sanity insanity networksanitytoinsan...@gmail.com; To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com; Subject: [OSL | CCIE_Voice] CME srst best practices.. Sent: Sat, Jul 6, 2013 4:29:43 PM hi Guys, In srst I use the following config... telephony-service srst mode auto-provision all srst dn line-mode octo 1)Do I also need to configure srst dn template srst ephone template ? 2)what are best practices for setting up the cue in srst mode ? If possible include details of.. -mwi -Xfer to VM - button 6 of phone 1 is pressed -MJ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] will phoneview will show srst ip phones for site-b and site-c
Dear All, I am using proctor labs for my study... as my all connected all phones for hq, site-b and site-c showing in phoneview but when goes in srst for site-b and c i cant see phone working in phoneview... how can i fix it? what is solution to see phone in phoneview in srst case? -- Thanks Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Cue call failed in srst mode
dial-peer yes, trigger mean ? From: Rrcrumm rrcr...@yahoo.com To: Karen Johnson karen.johnson...@yahoo.ca Cc: sanity insanity networksanitytoinsan...@gmail.com; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Sunday, July 7, 2013 8:08:42 PM Subject: Re: [OSL | CCIE_Voice] Cue call failed in srst mode Dial peer and trigger On Jul 7, 2013, at 4:22 PM, Karen Johnson karen.johnson...@yahoo.ca wrote: Yes From: Rrcrumm rrcr...@yahoo.com; To: Karen Johnson karen.johnson...@yahoo.ca; Cc: sanity insanity networksanitytoinsan...@gmail.com; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com; Subject: Re: [OSL | CCIE_Voice] Cue call failed in srst mode Sent: Sun, Jul 7, 2013 6:49:41 PM Do you have the voicemail command under telephony-service? Hath Rc On Jul 7, 2013, at 11:04 AM, Karen Johnson karen.johnson...@yahoo.ca wrote: Hi folks,My cue is working fine in normal mode. If i switch to srst mode it failed and busy tone. Dialpeer and codec g711 , sip-ua ip show correct.any idea what to tshoot and command to check?K From: sanity insanity networksanitytoinsan...@gmail.com; To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com; Subject: [OSL | CCIE_Voice] CME srst best practices.. Sent: Sat, Jul 6, 2013 4:29:43 PM hi Guys,In srst I use the following config...telephony-servicesrst mode auto-provision allsrst dn line-mode octo1)Do I also need to configure srst dn template srst ephone template ?2)what are best practices for setting up the cue in srst mode ? If possible include details of..-mwi-Xfer to VM - button 6 of phone 1 is pressed-MJ ___For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.com/Are you a CCNP or CCIE and looking for a job? Check out http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CUPC client to play voicemail
hi Guys, How do we get our CUPC client to play voicemail and display it on the client as a red Icon? I tried many times but not see this icon. -Drake ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
