[OSL | CCIE_Voice] Please help me !!!!!!!!!!
Dear all , Can any body help me solving my problem , its not working what to do , scenario is as following primary link ethernet , secondary link isdn static routing intersting traffic cannot be generated from branch i need to use isdn interface as soon as ehternet mpls (prmary ) link goes down. uff do know what to do. Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] stuck in problem.............
Dear All, I don't it right place to ask but i am stuck please help me I am stuck in configuration i am trying to configure isdn bri at branch at pri at HO. but primary link is mpls on HO and branch . routing is static . so need to have IP SLA i have configured IP sla and my secondary routes comes on branch but no traffic goes . I have tired all thing but fail . some problems -- 1) my interesting doesn't fire isdn . i try isdn test call then secondary routes comes up . but no traffic goes call remains active till i try to ping HO (but request time out) 2) primary route doesn't come up when i disconnect isdn call. what to do don't know stuck in there ... Please help me in this situatjion following is my configuration on HO and branch HO config - track 123 ip sla 1 reachability interface Dialer1 ip address 10.130.253.254 255.255.255.0 encapsulation ppp no ip mroute-cache dialer in-band dialer idle-timeout 999 dialer map ip 10.130.253.252 name Router_Alambagh broadcast dialer load-threshold 1 either dialer-group 1 end ip sla 1 icmp-echo 10.70.105.62 source-interface GigabitEthernet0/1 frequency 30 ip sla schedule 1 life forever start-time now ip route 10.2.1.64 255.255.255.192 10.70.104.153 track 123 ip route 10.2.1.128 255.255.255.192 10.70.104.153 track 123 ip route 10.2.1.64 255.255.255.192 10.130.253.252 100 ip route 10.2.1.128 255.255.255.192 10.130.253.252 100 Branch- interface Dialer1 ip address 10.130.253.252 255.255.255.0 encapsulation ppp dialer in-band dialer map ip 10.130.253.254 name HO-Rtr broadcast 2320635 dialer-group 1 no cdp enable ppp multilink hold-queue 300 in end interface BRI0/0/0 ip address negotiated encapsulation ppp dialer string 2459955 dialer load-threshold 125 either dialer-group 1 isdn switch-type basic-net3 isdn point-to-point-setup end ip sla 1 icmp-echo 10.70.104.154 source-ip 10.70.105.62 tag isdn frequency 180 ip sla schedule 1 life forever start-time now access-list 11 permit 10.2.1.136 access-list 11 permit 10.2.1.131 access-list 11 permit 10.2.1.134 dialer-list 1 protocol ip list 11 ip route 0.0.0.0 0.0.0.0 10.70.105.61 track 123 ip route 0.0.0.0 0.0.0.0 10.130.253.254 100 Warm Reagrds Akbar ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] bad problem in configuring isdn pri
Dear Graham , I am calling remote device , i am trying to call on the same router where pri is terminated. with command isdn test call interface serial0/1/0:15 but getting the error no route to destination while debugging isdn standard and q321 . I tried google that says This cause indicates that the called party cannot be reached because the network through which the call has been routed does not serve the destination desired. This cause is supported on a network dependent basis. Regards On Fri, Jul 23, 2010 at 12:52 PM, Graham Hopkins wrote: > Do you have access to the device you are calling ? > Are you sure it is setup and ready to receive the call ? > Call it from a handset - you should hear it ring even if the call cannot > complete as it's ISDN end to end > > The problem may be with the provider but it could also be with the > terminating device > > Graham > > On 23 Jul 2010, at 06:37, Akbar Ali wrote: > > Dear Bo , > > i am pri only for backup of mpls link , but first i am trying to test my > link from router itself. > but getting error that says no route to destination . provider is not ready > to accept that this is their problem. > > > Regards > > Akbar > > On Thu, Jul 22, 2010 at 4:55 PM, Bo Gao wrote: > >> Do you need to set isdn incoming-voice voice on D channel? >> >> >> >> >> >> On Thu, Jul 22, 2010 at 2:49 AM, Akbar Ali wrote: >> >>> Dear all , >>> >>> I am getting unexpected error while configuring isdn pri E1 , that i am >>> not able to understand >>> as provider says everything is right from their side what to do please >>> help me. >>> following is my configuration and errors also ... >>> >>> i tried self test on pri... >>> >>> controller E1 0/1/0 >>> pri-group timeslots 1-31 >>> description +BSNL PRI+ >>> interface Serial0/1/0:15 >>> no ip address >>> encapsulation ppp >>> dialer rotary-group 1 >>> dialer-group 1 >>> isdn switch-type primary-net5 >>> no peer default ip address >>> ppp authentication chap >>> >>> interface Dialer1 >>> ip address 10.130.253.254 255.255.255.0 >>> encapsulation ppp >>> no ip mroute-cache >>> dialer in-band >>> dialer idle-timeout 9 >>> dialer map ip 10.130.253.252 name FIS_HCBLROUTER broadcast >>> dialer load-threshold 1 either >>> dialer-group 1 >>> >>> >>> HO-Rtr#sh log >>> Syslog logging: enabled (0 messages dropped, 105 messages rate-limited, >>> 0 flushes, 0 overruns, xml disabled, filtering disabled) >>> No Active Message Discriminator. >>> >>> No Inactive Message Discriminator. >>> >>> Console logging: level debugging, 55360 messages logged, xml >>> disabled, >>> filtering disabled >>> Monitor logging: level debugging, 0 messages logged, xml disabled, >>> filtering disabled >>> Buffer logging: level debugging, 55463 messages logged, xml >>> disabled, >>> filtering disabled >>> Logging Exception size (4096 bytes) >>> Count and timestamp logging messages: disabled >>> Persistent logging: disabled >>> Trap logging: level informational, 741 message lines logged >>> Log Buffer (4096 bytes): >>> *Jul 22 09:05:01.697: ISDN Se0/1/0:15 Q921: User RX <- RRp sapi=0 tei=0 >>> nr=16 >>> *Jul 22 09:05:01.701: ISDN Se0/1/0:15 Q921: User TX -> RRf sapi=0 tei=0 >>> nr=16 >>> *Jul 22 09:05:11.697: ISDN Se0/1/0:15 Q921: User RX <- RRp sapi=0 tei=0 >>> nr=16 >>> *Jul 22 09:05:11.697: ISDN Se0/1/0:15 Q921: User TX -> RRf sapi=0 tei=0 >>> nr=16 >>> *Jul 22 09:05:21.697: ISDN Se0/1/0:15 Q921: User TX -> RRp sapi=0 tei=0 >>> nr=16 >>> *Jul 22 09:05:21.701: ISDN Se0/1/0:15 Q921: User RX <- RRp sapi=0 tei=0 >>> nr=16 >>> *Jul 22 09:05:21.701: ISDN Se0/1/0:15 Q921: User TX -> RRf sapi=0 tei=0 >>> nr=16 >>> *Jul 22 09:05:21.705: ISDN Se0/1/0:15 Q921: User RX <- RRf sapi=0 tei=0 >>> nr=16 >>> *Jul 22 09:05:31.697: ISDN Se0/1/0:15 Q921: User RX <- RRp sapi=0 tei=0 >>> nr=16 >>> *Jul 22 09:05:31.697: ISDN Se0/1/0:15 Q921: User TX -> RRf sapi=0 tei=0 >>> nr=16 >>> *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENT: UserIdle: callid 0x80B9 >>> received IS >>> DN_
Re: [OSL | CCIE_Voice] bad problem in configuring isdn pri
Dear Bo , i am pri only for backup of mpls link , but first i am trying to test my link from router itself. but getting error that says no route to destination . provider is not ready to accept that this is their problem. Regards Akbar On Thu, Jul 22, 2010 at 4:55 PM, Bo Gao wrote: > Do you need to set isdn incoming-voice voice on D channel? > > > > > > On Thu, Jul 22, 2010 at 2:49 AM, Akbar Ali wrote: > >> Dear all , >> >> I am getting unexpected error while configuring isdn pri E1 , that i am >> not able to understand >> as provider says everything is right from their side what to do please >> help me. >> following is my configuration and errors also ... >> >> i tried self test on pri... >> >> controller E1 0/1/0 >> pri-group timeslots 1-31 >> description +BSNL PRI+ >> interface Serial0/1/0:15 >> no ip address >> encapsulation ppp >> dialer rotary-group 1 >> dialer-group 1 >> isdn switch-type primary-net5 >> no peer default ip address >> ppp authentication chap >> >> interface Dialer1 >> ip address 10.130.253.254 255.255.255.0 >> encapsulation ppp >> no ip mroute-cache >> dialer in-band >> dialer idle-timeout 9 >> dialer map ip 10.130.253.252 name FIS_HCBLROUTER broadcast >> dialer load-threshold 1 either >> dialer-group 1 >> >> >> HO-Rtr#sh log >> Syslog logging: enabled (0 messages dropped, 105 messages rate-limited, >> 0 flushes, 0 overruns, xml disabled, filtering disabled) >> No Active Message Discriminator. >> >> No Inactive Message Discriminator. >> >> Console logging: level debugging, 55360 messages logged, xml disabled, >> filtering disabled >> Monitor logging: level debugging, 0 messages logged, xml disabled, >> filtering disabled >> Buffer logging: level debugging, 55463 messages logged, xml disabled, >> filtering disabled >> Logging Exception size (4096 bytes) >> Count and timestamp logging messages: disabled >> Persistent logging: disabled >> Trap logging: level informational, 741 message lines logged >> Log Buffer (4096 bytes): >> *Jul 22 09:05:01.697: ISDN Se0/1/0:15 Q921: User RX <- RRp sapi=0 tei=0 >> nr=16 >> *Jul 22 09:05:01.701: ISDN Se0/1/0:15 Q921: User TX -> RRf sapi=0 tei=0 >> nr=16 >> *Jul 22 09:05:11.697: ISDN Se0/1/0:15 Q921: User RX <- RRp sapi=0 tei=0 >> nr=16 >> *Jul 22 09:05:11.697: ISDN Se0/1/0:15 Q921: User TX -> RRf sapi=0 tei=0 >> nr=16 >> *Jul 22 09:05:21.697: ISDN Se0/1/0:15 Q921: User TX -> RRp sapi=0 tei=0 >> nr=16 >> *Jul 22 09:05:21.701: ISDN Se0/1/0:15 Q921: User RX <- RRp sapi=0 tei=0 >> nr=16 >> *Jul 22 09:05:21.701: ISDN Se0/1/0:15 Q921: User TX -> RRf sapi=0 tei=0 >> nr=16 >> *Jul 22 09:05:21.705: ISDN Se0/1/0:15 Q921: User RX <- RRf sapi=0 tei=0 >> nr=16 >> *Jul 22 09:05:31.697: ISDN Se0/1/0:15 Q921: User RX <- RRp sapi=0 tei=0 >> nr=16 >> *Jul 22 09:05:31.697: ISDN Se0/1/0:15 Q921: User TX -> RRf sapi=0 tei=0 >> nr=16 >> *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENT: UserIdle: callid 0x80B9 >> received IS >> DN_CALL (0x0) >> *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENTd: UserIdle: Call to 2320635 at >> 64 Kb >> /s >> *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENTd: isdn_get_guid: Cannot >> allocate a G >> UID (5) >> *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENT: process_pri_call: call id >> 0x80B9, n >> umber 2320635, Guid 0026F91065D9, speed 64, call type DATA, redial No, CSM >> call >> No, pdata No >> *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENTd: process_pri_call: No name in >> GTD >> *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENTd: fill_cid_table_voice: Don't >> know c >> alling number for redial. >> *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENTd: fill_cid_table_voice: >> Created entr >> y call_id 0x80B9, speed 64, remote 2320635, calling >> *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENTd: Packet to CC Data >> *Jul 22 09:05:41.433: 4D000180B91604030800101804000300 >> *Jul 22 09:05:41.433: FF700900013233323036333504030800 >> *Jul 22 09:05:41.433: 101803000300 >> *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENTd: calltrkr_setup_received: >> isdn_info >> =1732177424l, call_id=0x80B9 ORIGINATE >> *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENTd: calltrkr_setup_received: >> calltrack >> er disabled >> *Jul 22 09:05:41.433: ISDN Se0/1/0:15 Q931: Sending SETUP
[OSL | CCIE_Voice] bad problem in configuring isdn pri
Dear all , I am getting unexpected error while configuring isdn pri E1 , that i am not able to understand as provider says everything is right from their side what to do please help me. following is my configuration and errors also ... i tried self test on pri... controller E1 0/1/0 pri-group timeslots 1-31 description +BSNL PRI+ interface Serial0/1/0:15 no ip address encapsulation ppp dialer rotary-group 1 dialer-group 1 isdn switch-type primary-net5 no peer default ip address ppp authentication chap interface Dialer1 ip address 10.130.253.254 255.255.255.0 encapsulation ppp no ip mroute-cache dialer in-band dialer idle-timeout 9 dialer map ip 10.130.253.252 name FIS_HCBLROUTER broadcast dialer load-threshold 1 either dialer-group 1 HO-Rtr#sh log Syslog logging: enabled (0 messages dropped, 105 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled) No Active Message Discriminator. No Inactive Message Discriminator. Console logging: level debugging, 55360 messages logged, xml disabled, filtering disabled Monitor logging: level debugging, 0 messages logged, xml disabled, filtering disabled Buffer logging: level debugging, 55463 messages logged, xml disabled, filtering disabled Logging Exception size (4096 bytes) Count and timestamp logging messages: disabled Persistent logging: disabled Trap logging: level informational, 741 message lines logged Log Buffer (4096 bytes): *Jul 22 09:05:01.697: ISDN Se0/1/0:15 Q921: User RX <- RRp sapi=0 tei=0 nr=16 *Jul 22 09:05:01.701: ISDN Se0/1/0:15 Q921: User TX -> RRf sapi=0 tei=0 nr=16 *Jul 22 09:05:11.697: ISDN Se0/1/0:15 Q921: User RX <- RRp sapi=0 tei=0 nr=16 *Jul 22 09:05:11.697: ISDN Se0/1/0:15 Q921: User TX -> RRf sapi=0 tei=0 nr=16 *Jul 22 09:05:21.697: ISDN Se0/1/0:15 Q921: User TX -> RRp sapi=0 tei=0 nr=16 *Jul 22 09:05:21.701: ISDN Se0/1/0:15 Q921: User RX <- RRp sapi=0 tei=0 nr=16 *Jul 22 09:05:21.701: ISDN Se0/1/0:15 Q921: User TX -> RRf sapi=0 tei=0 nr=16 *Jul 22 09:05:21.705: ISDN Se0/1/0:15 Q921: User RX <- RRf sapi=0 tei=0 nr=16 *Jul 22 09:05:31.697: ISDN Se0/1/0:15 Q921: User RX <- RRp sapi=0 tei=0 nr=16 *Jul 22 09:05:31.697: ISDN Se0/1/0:15 Q921: User TX -> RRf sapi=0 tei=0 nr=16 *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENT: UserIdle: callid 0x80B9 received IS DN_CALL (0x0) *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENTd: UserIdle: Call to 2320635 at 64 Kb /s *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENTd: isdn_get_guid: Cannot allocate a G UID (5) *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENT: process_pri_call: call id 0x80B9, n umber 2320635, Guid 0026F91065D9, speed 64, call type DATA, redial No, CSM call No, pdata No *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENTd: process_pri_call: No name in GTD *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENTd: fill_cid_table_voice: Don't know c alling number for redial. *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENTd: fill_cid_table_voice: Created entr y call_id 0x80B9, speed 64, remote 2320635, calling *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENTd: Packet to CC Data *Jul 22 09:05:41.433: 4D000180B91604030800101804000300 *Jul 22 09:05:41.433: FF700900013233323036333504030800 *Jul 22 09:05:41.433: 101803000300 *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENTd: calltrkr_setup_received: isdn_info =1732177424l, call_id=0x80B9 ORIGINATE *Jul 22 09:05:41.433: ISDN Se0/1/0:15 EVENTd: calltrkr_setup_received: calltrack er disabled *Jul 22 09:05:41.433: ISDN Se0/1/0:15 Q931: Sending SETUP callref = 0x0126 call ID = 0x80B9 switch = primary-net5 interface = User *Jul 22 09:05:41.433: ISDN Se0/1/0:15 Q921: User TX -> INFO sapi=0 tei=0, ns=16 nr=16 *Jul 22 09:05:41.433: ISDN Se0/1/0:15 Q931: SETUP pd = 8 callref = 0x0126 Bearer Capability i = 0x8890 Standard = CCITT Transfer Capability = Unrestricted Digital Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA9839F Exclusive, Channel 31 Called Party Number i = 0x81, '2320635' Plan:ISDN, Type:Unknown *Jul 22 09:05:41.445: ISDN Se0/1/0:15 Q921: User RX <- RR sapi=0 tei=0 nr=17 *Jul 22 09:05:41.453: ISDN Se0/1/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=16 nr=17 *Jul 22 09:05:41.453: ISDN Se0/1/0:15 Q931: RELEASE_COMP pd = 8 callref = 0x812 6 Cause i = 0x829F - Normal, unspecified *Jul 22 09:05:41.453: ISDN Se0/1/0:15 Q921: User TX -> RR sapi=0 tei=0 nr=17 *Jul 22 09:05:41.453: ISDN EVENTd: cc_clear_free_list freeing 0x673576E0 *Jul 22 09:05:41.453: ISDN Se0/1/0:15 EVENT: process_rxstate: ces/callid 1/0x80B 9 calltype 1 CALL_REJECTION *Jul 22 09:05:41.453: ISDN Se0/1/0:15 EVENTd: process_rxstate: cause=0x1F (31), cause_present=1 *Jul 22 09:05:41.453: ISDN Se0/1/0:15 EVENT: process_rxstate: ces/callid 1/0x80B 9 calltype 1 CALL_CLEARED *Jul 22 09:05:41.453: ISDN Se0/1/0:15 EVENTd: proc
