Re: [OSL | CCIE_Voice] lab - 6

[Bartosz Sokolowski]

You are wrong.
Early Offer requires MTP. CCM doesn't care how you provide MTP.
It's possible to configure software MTP in IOS with G711 or G729. If we
consider software MTP it's G711 *or* (not and!) G729. If you use hardware
MTP on IOS it's G711 and/or G729.
-- 
Regards,
Bartosz

2011/11/21 Peter Jeff 

> But early offer required MTP hardware if i am nt wrong
>
>  *From:* Mohamed Hassan 
> *To:* Abel ... 
> *Cc:* "ccie_voice@onlinestudylist.com" 
> *Sent:* Monday, November 21, 2011 12:28 PM
>
> *Subject:* Re: [OSL | CCIE_Voice] lab - 6
>
>  SIP Early offer it is IOS command, it is equal to the configuration of
> fast start on CUCM
>
>
> http://www.cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-sipsip.html#wp1351645
>
> It can be configured globally
> SUMMARY STEPS
> *1. **enable*
> *2. **configure terminal*
> *3. **voice service voip*
> *4. **allow*-*connections sip*
> *5. **early-offer forced*
> *6. **exit*
>
>
> *and it can be configured under dial-peer*
>  SUMMARY STEPS
> *1. **enable*
> *2. **configure terminal*
> *3. **dial-peer voice 1 voip*
> *4. **voice-class sip early-offer forced*
> *5. **exit*
>
>
> On Mon, Nov 21, 2011 at 2:48 AM, Abel ...  wrote:
>
> Well, the DHCP issue can be done easy if you look 5 minutes on 
> cisco.comdocumentation, by Early offer what you mean? no interdigit timeout?
>
>
> On Sun, Nov 20, 2011 at 2:22 PM, datucha123 datucha123 <
> datucha...@gmail.com> wrote:
>
> Do you mean under the DHCP configuration, that such question has been on
> the exam?
>
> What do you mean under the SIP early offer? or MGCP TS?
>
>
>
>
>  On Sun, Nov 20, 2011 at 8:24 PM, Peter Jeff wrote:
>
> Hi Guys,
>
> It was my 5th attempt and i got lab 6 frustration is on peak everytime i
> went for the lab i get new lab
>
> From last 2 months all my JR guys passed in dubai bec they got lab 3 and
> lab 4 in Dubai since last 2 months i saw lot of guys cleared from dubai
>
> Now lab 6 i am so so so frustrated its all new
>
> Configure the local Cisco router R3 as DHCP server to provide ip add  for
> SC from local subnet , MAke sure SCPH1 get ip add 142.102.66.11 and SCPH2
> shld be 142.102.66.12 YOU ARE ALLOWED TO CREATE ONE DHCP POOL FOR ALL SC
> PHONES
>
> SIP early offer , MGCP TS which some different issue.
>
> best of luck guys my Christmas will go bad this time as no dates available
> in Dubai now. Its my bad sunday
>
> Regards
> Jeff
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com 
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com 
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com 
>
>
>
>
> --
> Engineer / Mohamed Rabea
> Unified communication engineer
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] WB1 LAB 9A BACD: Call Redirect after 90 Sec. not working

[Bartosz Sokolowski]

Hi,

Change "param max-time-call-retry 9" to "param max-time-call-retry 90" and
it should work as expected.
If you set parameter value which is out of range (I think 60 is
minimum for param
max-time-call-retry) it uses default value.
-- 
Regards,
Bartosz

2011/10/4 Robert Schuknecht 

> Hi, 
>
> ** **
>
> In WB 1 Question 9.2 asks us that in incoming call, into the AA 3500,
> should be redirected to 3001 after 90 Sec. of Ringing. I configured the BACD
> according to the PG but the call will be redirected after approx.. 3 Min and
> not after 90 Sec.
>
> ** **
>
> Here is the relevant configuration:
>
> ** **
>
> ** **
>
> application
>
> service queue flash://bacdprompts/app-b-acd-2.1.2.2.tcl
>
>   param queue-len 15
>
>   param aa-hunt10 3006
>
>   param number-of-hunt-grps 2
>
>   param aa-hunt2 3210
>
>   param queue-manager-debugs 1
>
> !
>
> service aa1 flash://bacdprompts/app-b-acd-aa-2.1.2.2.tcl
>
>   paramspace english index 1
>
>   param aa-pilot 3500
>
>   param number-of-hunt-grps 2
>
>   param handoff-string aa1
>
>   paramspace english language en
>
>   param welcome-prompt _bacd_welcome.au
>
>   param call-retry-timer 15
>
>   param service-name queue
>
>   paramspace english location flash://bacdprompts/
>
>   param second-greeting-time 60
>
>   param max-time-vm-retry 2
>
>   param voice-mail 3001
>
>   param max-time-call-retry 9
>
> ** **
>
> Any help is appreciated!
>
> ** **
>
> /Robert
>
> ** **
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Using "Builtin:" B-ACD files ?

[Bartosz Sokolowski]

Hi,

Don't know how is it going to be on the lab but built-in BACD works fine on
IOS 12.4(20)T and 12.4(22)T in my lab.
-- 
Regards,
Bartosz


2011/9/29 ccielabrat 

> Can anyone let me know if they have been able to use the "Built-In" b-acd
> tcl scripts ?
>
> You can see both app-b-acd and app-b-acd-aa are available internal to the
> IOS by running
> "Show call application voice summary"
>
> I'm not able to get them to work properly and wanted to find out if it
> should be possible in case they expect to use the "built-in" versions on the
> lab.
>
>
> Thanks
> LabRat
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Regarding MVA, got error "Your call cannot be completed as dial..."

[Bartosz Sokolowski]

Im my opinion if there is ANN message played the problem is within CCM not
GW but I may be wrong :)
-- 
Regards,
Bartosz

2011/8/10 Brian Mulgrew 

> Hi - can you send on output for debugs isdn q931 and voice dialpeer?
>
> hth
>
> On Wed, Aug 10, 2011 at 2:14 AM, Vincent Lyu  wrote:
>
>> hi Bartosz,
>>
>> All of this based on one default CSS and partition.
>>
>> VincentLyu
>>
>>
>>
>> On Wed, Aug 10, 2011 at 1:54 AM, Bartosz Sokolowski <
>> ibartosz.sokolow...@gmail.com> wrote:
>>
>>> Where did you put MVA number (which partition) configured in Ccm's Media
>>> menu? Is it accesible via RDP css?
>>>
>>> --
>>> Pozdr,
>>> Bartek
>>>
>>> Dnia 9 sie 2011 o godz. 18:07 Vincent Lyu 
>>> napisał(a):
>>>
>>> Hi Expert,
>>>
>>>
>>>
>>> when i setup the mobile voice access features in cucm7, I heard "Your
>>> call cannot be completed as dial..." instead of 2-stage dialing response
>>> when i called in from outside, anyone meet this issue before?
>>>
>>>
>>>
>>>
>>>voice service voip
>>>
>>>
>>>  allow h323 to h323
>>>
>>>
>>>
>>>application
>>>
>>> service mva  <http://cucm_ip:8080/ccmivr/pages/IVRMainpage.vxml>
>>> http://cucm_ip:8080/ccmivr/pages/IVRMainpage.vxml
>>>
>>>
>>>
>>>dial-peer voice 3999 pots
>>>
>>> service mva
>>>
>>> incoming called-number 3999
>>>
>>> direct-inward-dial
>>>
>>>
>>>
>>>dial-peer voice 13999 voip
>>>
>>> destionation-pattern 3999
>>>
>>> session target ipv4:cucm_ip
>>>
>>> dtmf-relay h245-alphanumeric
>>>
>>> codec g711ulaw
>>>
>>> -
>>>
>>>  2811(config)#do sh call appli voice mva
>>>
>>> Script Name : MVA
>>>
>>>URL  : 
>>> http://cucm_ip<http://cucm_ip:8080/ccmivr/pages/IVRMainpage.vxml>
>>> :8080/ccmivr/pages/IVRMainpage.vxml
>>>
>>>Type : Service
>>>
>>>State: Registered
>>>
>>>Life : Configured
>>>
>>>Exec Instances: 0
>>>
>>>
>>> Script Code Begin:
>>>
>>> 
>>>
>>> VXML Application MVA
>>>
>>> URL=http://cucm_ip<http://cucm_ip:8080/ccmivr/pages/IVRMainpage.vxml>
>>> :8080/ccmivr/pages/IVRMainpage.vxml
>>>
>>> Security Level: not trusted
>>>
>>> 0 incoming calls
>>>
>>> 0 calls handed off to it
>>>
>>> 0 call transfers initiated
>>>
>>> 0 pages loaded,  0 successful
>>>
>>> 0 prompt play attempts, 0 successful
>>>
>>> 0 recorded messages
>>>
>>>
>>>
>>> The VXML Script is:
>>>
>>> --
>>>
>>> 
>>>
>>> 
>>>
>>>
>>>
>>>
>>>   
>>>
>>>
>>> 
>>>
>>>   >> src="http://cucm_ip<http://cucm_ip:8080/ccmivr/pages/IVRMainpage.vxml>
>>> :8080/ccmivr/IVRGetAudioFile.do?srcdir=en_US&file=1.au"/>
>>>
>>> 
>>>
>>> 
>>>
>>> 
>>>
>>>
>>> 
>>>
>>> 
>>>
>>>
>>> 
>>>
>>>>> next="http://cucm_ip<http://cucm_ip:8080/ccmivr/pages/IVRMainpage.vxml>:8080/ccmivr/IVRCalleridLookup.do"
>>> method="get" namelist="remotedest srcdir"/>
>>>
>>> 
>>>
>>>
>>>
>>> 
>>>
>>>
>>>   
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>   .
>>>
>>>   >> type="digits?minlength=1;maxlength=50">
>>>
>>>  
>>>
>>>   >> src="http://cucm_ip<http://cucm_ip:8080/ccmivr/pages/IVRMainpage.vxml>
>>> :8080/ccmivr/IVRGetAudioFile.do?srcdir=en_US&file=3.au"/>
>>>
>>>  
>>>
>>>
>>>  
>>>
>>>
>>>  
>>>
>>>
>>>  
>>>
>>>
>>>  
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> 
>>>
>>>
>>>
>>>
>>>
>>> 
>>>
>>>
>>>>> next="http://cucm_ip<http://cucm_ip:8080/ccmivr/pages/IVRMainpage.vxml>1:8080/ccmivr/IVRCalleridLookup2.do"
>>> method="get" namelist="dest srcdir accessCount"/>
>>>
>>>  
>>>
>>>
>>>   
>>>
>>>
>>>
>>>
>>> 
>>>
>>>
>>>
>>> 
>>>
>>>
>>> VincentLyu
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training, please
>>> visit <http://www.ipexpert.com>www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> <http://www.PlatinumPlacement.com>www.PlatinumPlacement.com
>>>
>>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] VWIC2-2MFT-G703 for voice lab

[Bartosz Sokolowski]

Hi!

The G703 version of the card can be used in a voice lab without any problems
byt with some gotchas :(
I was using it in PSTN-WAN router. The problem is that G703 card is not
supported by CCM MGCP call-agent. The H323 on IOS supports them and they are
working fine. Configuration is similar to "regural" E1/T1 card.
-- 
Regards,
Bartosz

2011/8/8 Le Minh Khoi 

>  This is Feature Comparison from cisco.com. But I'm not sure can use
> this card for my home lab.
>
> http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8028d2db.html
>
> *Table 2.* Cisco MFT VWIC2 Card Feature Comparison
>   Part Number Ports T1 Support E1 Support Unstructured E1 (G.703) Support Data
> Support WIC Mode Voice Support VIC Mode Drop-and-Insert Multiplexing
>   VWIC2-1MFT-T1/E1
> 1
>  Yes
>  Yes
>  No
>  Yes
>  Yes
>  Yes*
>   VWIC2-2MFT-T1/E1
> 2
>  Yes
>  Yes
>  No
>  Yes
>  Yes
>  Yes
>   VWIC2-1MFT-G703
> 1
>  Yes
>  Yes
>  Yes
>  Yes
>  Yes
>  Yes*
>   VWIC2-2MFT-G703
> 2
>  Yes
>  Yes
>  Yes
>  Yes
>  Yes
>  Yes
>   Thanks
>
> On 8/8/2011 1:20 PM, Ccie wrote:
>
> Does it support E1/T1 voice config? I don't think so!!
>
>
>
> On 8 Aug 2011, at 04:30, Le Minh Khoi  
>  wrote:
>
>
>  Hi all,
> I'm building a voice home lab. I can borrow some  routers  and Vwic card from 
> my company.
> Can  i use VWIC2-2MFT-G703 for voice lab?
> Regards,
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] UCCX Prompt

[Bartosz Sokolowski]

Hi,

If you checked all prompts in CCX and didn't find it's probably not there :)
The only "default" prompt I know which ends with "will be with you shortly"
is BACD's "en_bacd_allagentsbusy.au"
Maybe that is what you are lookin for?
-- 
Regards,
Bartosz

2011/7/5 

>  Hi Experts,
>
> I am looking for a prompt which says "All of our representatives are busy
> at this time please stay on the line someone will be with you shortly"
>
> The default ICD propmt plays a queue prompt which says" All of our
> representatives are busy at this time, your call is very important to us,
> please stay on the onlien your call will behandled in the order it was
> received"
>
> can you help me find out where i can find the below prompt:
>
> "All of our representatives are busy at this time please stay on the line
> someone will be with you shortly"
>
> I browsed through WFAVVID---PromptsSystem---G711ulawICD
> WFAVVID---PromptsSystem---G711ulawICM
>
> Both these two paths do not have the above mentioned prompt which ends with
> "will be with you shortly"
>
> Please suggest...
>
>
>
>
> * Please do not print this email unless it is absolutely necessary. *
>
> The information contained in this electronic message and any attachments to
> this message are intended for the exclusive use of the addressee(s) and may
> contain proprietary, confidential or privileged information. If you are not
> the intended recipient, you should not disseminate, distribute or copy this
> e-mail. Please notify the sender immediately and destroy all copies of this
> message and any attachments.
>
> WARNING: Computer viruses can be transmitted via email. The recipient
> should check this email and any attachments for the presence of viruses. The
> company accepts no liability for any damage caused by any virus transmitted
> by this email.
>
> www.wipro.com
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] mva partial match does not work

[Bartosz Sokolowski]

Hi,

Partial match is very buggy in CM 7.0 and it doesn't work in general :)
Search list archive for this matter. It was discussed something like a month
ago. There were even CCM traces provided showing it's a bug.
-- 
Regards,
Bartosz

2011/6/3 "Farkas Péter" 

> Gents,
>
> I have a H323 gw only for PSTN and RD is 10 digits. PSTN also sends this
> ten digits. If complete match is configured MVA recognizes RD and asks only
> for PIN. However if I set partial match with any number of digit MVA always
> requires RD to be given.
>
> I have already restarted both CM and MVA services.
>
> Could you advice how to resolve and why partial match does not work but
> complete does?
>
> Peter
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] NTP on the lab

[Bartosz Sokolowski]

Hi,

Any good way to figure out if any timezone has summer time using resources
available on the lab?
As I live in Europe I really don't know how it looks in Asia for example...
-- 
Regards,
Bartosz

2011/6/3 Roig Borrell, Francesc Xavier 

>  Hi,
>
>
>
> For US you need configure
>
>
>
> HQ
>
> Ntp server xx.xx.xx.xx
>
> Clock timezone pst -8
>
> Clock summertime pst recurring
>
>
>
> For Honkong
>
> Ntp server xx.xx.xx.xx
>
> Clock timezone hkg 8
>
> <<< Do no use recurring,  China does not have savelight
>
>
>
> Verify the time the phones get checking the real time and the timezones
>
>
>
> http://www.worldtimeserver.com/
>
>
>
>
>
>
>
>
>
>
>
>
>
> Francesc Xavier Roig Borrell
>
> Network Senior Consultant
>
> Integración de Sistemas y Tecnología
>
> C/Santander, 49-51
>
> Barcelona 08020
>
> Tel. Fijo: (+34) 934965108 ext 64697
>
> Tel. Móvil / Fax: (+34) 647 32 21 55 (24697) / (+34) 934965161
>
> email: francesc.ro...@tecnocom.es
>
> http://www.tecnocom.es
>
>
>
> *Por favor, antes de imprimir este mensaje, asegúrate de que es necesario.
> Ayudemos a cuidar el medio ambiente*
>
> *Este mensaje puede contener información confidencial o privilegiada. Si
> le ha llegado por error, rogamos no haga uso del mismo, avise al remitente y
> bórrelo. **Consulte **aviso 
> legal
> *
> *This message may contain confidential or privileged information. If it
> has been sent to you in error, please do not use it, notify the sender of
> the error and delete it. **See **legal 
> notice
> *
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
<>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CME diap-peer question

[Bartosz Sokolowski]

Hi,

Config provided is good. If it goes via dial-peer 1 instead of dial-peer 3
the problem is at BR1 site.
Check incomming dial-peer on BR1 etc.
Use "voice iec syslog" on CME and BR1. It may indicate where the problem is.
Search the list archive on how to use "voice iec" feature.
-- 
Regards,
Bartosz

2011/6/2 Randall Crumm 

> HI,
> I have a question.
> Say I have a CME and have a dial-peer for intl calls that goies out local
> GW
> I also need two dial-peers(1 backupo) to route calls through Gatekeeper@HQ,
> 1st choice, or through the branch 1 gw as a backup.
>
> I get calls to work through the GK but when it is down my calls go through
> dial-peer 1 instead of dial-peer 3
>
> My question is how is how do make sure the call goes though dial-peer 3 and
> not dial-peer 1
>
>
> (leaving some info out)
>
> dial-peer voice 1 pots - local gw
> dest-pattern 900T
> prefix 00
> port0/0/0:15
>
> dial-peer voice 2 voip
> dest-patt 9001212T
> session target ras
>
> dial-peer voice 3 voip
> dest-pattern 9001212T
> session target br1
> pref 1
>
>
> thanks
> randall
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] drop packets from 3750 output queue 2

[Bartosz Sokolowski]

Hi,

Ingress or egress??
My quess it to put COS 4 into different threshold than COS 6 and 7 and for
egress tune queue-set assigned to the interface.
I assume that auto qos was run before.

*! put cos 4 in Q2 threshold 1
*mls qos srr-queue output cos-map q 2 t 1 4

*! tune dscp to queue map as it has precedence over cos to queue map if maps
are inconsistent
*mls qos srr-queue output dscp-map q 2 t 1 32

*! configure queue-set 2 with threshold 1 set to 60%
*mls qos queue-set output 2 threshold 2 60 100 100 400

*! assign queue-set 2 to the interface
*int f0/2
 queue-set 2

Any comments welcome :)
-- 
Regards,
Bartosz



2011/6/2 adam compton 

> I have a switch qos item I am not sure how to address:
>
> When queue 2 reaches 60% capacity COS 4 packets should be dropped.
>
> COS 4,6,7 is mapped to queue 2.  any ideas?
>
> Adam Compton
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] frame-relay traffic-shaping on the test

[Bartosz Sokolowski]

Hi,

In my opinion if you have such scanario you should use "class based frts"
which does not require frame-relay traffice-shaping command on physical
interface.
So you can configure shaping for one PVC not affecting the other.
-- 
Best regards,
Bartosz

2011/6/1 adam compton 

> So I have a question as it pertains to the test.  If I use auto qos on the
> Serial interfaces of the HQ and SiteB routers, frame-relay traffic shaping
> will be enabled.  I know it will use the bandwidth that you configure for
> shaping.  I also understand on the HQ router, the link to SiteC would
> default to 56k in frame-relay traffic shaping.  Let's assume nothing is
> asked for QOS on the SiteC connection.
>
> My instinct is to configure the bandwith on the SITE C link to 1544 so that
> the link will not be affected.  Am I using the correct value for this
> scenario?
>
> Adam Compton
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] 3750 or 3560

[Bartosz Sokolowski]

Hi,

>From the voice lab perspective both switches are exactly the same.
It's NOT true that auto qos behaves differently.
Auto qos may be IOS version/feature set dependent.
I'm using c3560-advipservicesk9-mz.122-46.SE and don't have any problems
described by others.
-- 
Regards,
Bartosz

2011/6/1 josh west 

> I need a switch for my lab and ideally would like to have a 3750 but from
> what I am reading the 3560 is very similar for what is needed on the voice
> lab. Can anyone confirm this or tell me what a 3750 has that the 3560 does
> not.
>
> Thanks in advanced.
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Problems invoking ios transcoders

[Bartosz Sokolowski]

Hi,

If your MRG/MRGL config  is correct (CTI Ports have access to xcoder
resource) then it must work. Check if you have g729r8 codec in your dsp
profile on IOS. By default this codec is missing.
-- 
Regards,
Bartosz

2011/5/22 Karim Hany 

> Hi All,
>
> I have problem with invoking transcoder. I registered two IOS transcoders
> one for HQ & BR1 both are registered to CCM. The goal is BR1 should be able
> to call ICD pilot (CRS uses codec G711 only) number on HQ using codec G729.
> But it always fail to invoke transcoder at HQ and call fails and I get a
> fast busy tone. Call from HQ to ICD is ok because no transcoder is needed.
> However, when i call from BR1 to HQ via PSTN, the call gets through and I
> can hear the welcoming prompt.
>
> I've also tried to associate BR1 xcoder with HQ IOS MRG/MRGL which is
> assigned to HQ DP as if it's a local resource but still not working.
>
> Any idea on what could be the problem or misconfiguration.
>
> Appreciate your advice and inputs.
>
> Thanks
>
> Regards,
>
> Karim
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Avoid MGCP bind using wrong IP during initial association

[Bartosz Sokolowski]

Hi,

If I experience such thing I do "sh run | i mgcp" and then use notepad and
quick c&p the following:

no mgcp
no mgcp bind control source-interface Loopback0
no mgcp bind media source-interface Loopback0
mgcp bind control source-interface Loopback0
mgcp bind media source-interface Loopback0
mgcp
-- 
Regards,
Bartosz

2011/5/22 Cristobal Priego 

> When I have had the same problem reload is the solution
>
> Enviado desde mi iPhone
>
> El May 22, 2011, a las 1:28, Ki Wi  escribió:
>
>  Anyone faced this weird issue?
>>
>> Sometimes even with "mgcp bind" command specified, it will bind to ccm
>> using wrong ip address. What's the solution to resolve it?
>>
>> For me, i will just reboot the router but it waste quite a few minutes.
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Unity Connection Voice View

[Bartosz Sokolowski]

Hi,

I don't think it's possible to make CUC PhoneView to work similar to CUE
VioceView Service.
-- 
Regards,
Bartosz

2011/5/16 bruno 

>   hello all,
>
> I have Voice View working great but in Cisco CME with *Unity* Express I
> think
> this feature can be accessed by a service. With *Unity* *Connection* the
> only
> way I see to access this is to dial into *unity*, put in password, choose
> option 5 and then select the way you want the messages to be viewed. Is
> there a way to make this a service???
>
> Best Regards,
> bruno
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] VoiceMail (Exam result FAILED)

[Bartosz Sokolowski]

Hi,

I'm sorry for you :(
Maybe you've integrated VM not in a way they asked? Eg used SCCP for CUC but
they were looking for SIP?
-- 
Regards,
Bartosz

2011/5/13 Naoufal Kerboute 

>  Hi guys,
>
>
>
> I failed, and I got 19% in voicemail, and I was sure that everything is ok,
> mailbox created with the password 12345 (as asked in the exam), forward to
> VM after 20s for all phones, MWI was working I’ve checked that many times.
> For CUE the same thing MWI and mailbox working, What could be wrong?
>
>
>
> Until now I’m sure that I’ve tested voicemail (MWI, mailbox, password),
> users imported from CUCM as requested.
>
>
>
> Any ideas?**
>
> * *
>
> *Naoufal*
>
>
> *
> * This Communication is Private & Confidential. This message and any
> attachments may contain information that is privileged and / or confidential
> and is the property of MHD InfoTech LLC. *
> * It is intended solely for the person to whom it is addressed. If you are
> not the intended recipient, you are hereby notified that you are not
> authorized to read, print, retain copy, disseminate, distribute, or *
> * use this message & any attachments or any part thereof. If you have
> received this message in error, please notify the sender immediately and
> delete the message and any attachments from your system. *
>
> *
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] partial match MVA

[Bartosz Sokolowski]

Hi,

It was H323 not MGCP + hairpinning.
Anyway thanks for interesting suggestion :)
-- 
Regards,
Bartosz

2011/5/8 Miron Kobelski 

> Doies your gateway use H.323 or MGCP + H.323 hairpinning?
> If the latter is the case, then you have expected behaviour. workaround is
> to use translation patterns or add internal extension as remote destination.
> search the list archieve for more information.
>
> best regards
> kobel;
>
> On Sun, May 8, 2011 at 07:53, donny f  wrote:
>
>> hi exp,
>>
>> I tried to config :   MVA partial match.
>>
>> - I have specify RD : 408-555-7890
>> - And I call from PSTN (555-7890)  to extension 5002
>> - Service parameter  "Matching CallerID : Partial"  &  Number of Digit  :
>> 7 "
>>
>>  however it still prompt me for "Remote Dest Number" and "Pin" ?
>> what I have missed here ? (I have restart the MVA service and UCM)
>>
>>
>> tks
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] partial match MVA

[Bartosz Sokolowski]

Hi,

ANI from a GW is the calling number observed via deb isdn q931 and in traces
provided. It was incomming call to CCM.
RDP number was +447976852817 (vol 2 LAB 7 UK mobile). I tried to compare
last 6 digits only but it failed.
It was failing no matter how many digits were set in "Number of Digits for
Caller ID Partial Match"
-- 
Regards,
Bartosz

2011/5/8 Moataz Mamdouh 

> what is the ANI sent from the PSTN ?
> Is it the same as your RD ?
>
>
> Best Regards ,
>
> Moataz Mamdouh Tolba
> CCIE # 26129 (Voice)
>
> -Original Message-
> From: donny f 
> Sender: ccie_voice-boun...@onlinestudylist.com
> Date: Sat, 7 May 2011 23:53:47
> To: 
> Subject: [OSL | CCIE_Voice] partial match MVA
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] partial match MVA

[Bartosz Sokolowski]

Hi,

It seems that there is a bug in some CCM versions considering partial match.
I tested 7.0.1.11000-3 and it doesn't work.
Refer to below CCM trace (CM Trace - Cisco Mobile Voice Access Service)
where partial match is enabled and number of digits was 6. Look for the
following:
* -new-code-got-callerid-as-remotedest: 07976852817
* partial match enabled
* LIKE '%07976852817'
-- 
Regards,
Bartosz


2011-02-15 14:36:46,474 INFO  [main] controller.IVRGenerateFirstPage -
[CCM_IVR]IVR First page Filename= pages/IVRMainPage.vxml

2011-02-15 14:36:46,508 INFO  [main] controller.IVRGenerateFirstPage -
[CCM_IVR]generateFirstVxmlPage():: IVR First page Filename= IVRMainpage.vxml

2011-02-15 14:36:46,509 INFO  [main] controller.IVRGenerateFirstPage -
[CCM_IVR]IVR First page done successfully

2011-04-28 11:21:14,451 DEBUG [http-8080-Processor25]
controller.IVRGetAudioFile - [CCM_IVR]:: IVR get Filename

2011-04-28 11:21:14,454 DEBUG [http-8080-Processor25]
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile()

2011-04-28 11:21:14,455 DEBUG [http-8080-Processor25]
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile() fileName = 1.au and
locale = en_US

2011-04-28 11:21:14,455 DEBUG [http-8080-Processor25]
controller.IVRGetAudioFile - [CCM_IVR]::getLocaleFile() fileName = 1.au and
locale = en_US

2011-04-28 11:21:14,456 DEBUG [http-8080-Processor25]
controller.IVRGetAudioFile - [CCM_IVR]:: getting the file now

2011-04-28 11:21:14,456 DEBUG [http-8080-Processor23]
controller.IVRCalleridLookup - [CCM_IVR]::execute(): action start

2011-04-28 11:21:14,457 DEBUG [http-8080-Processor23]
controller.IVRCalleridLookup - [CCM_IVR]::srcdir: en_US

2011-04-28 11:21:14,457 DEBUG [http-8080-Processor23]
controller.IVRCalleridLookup -
[CCM_IVR]::-new-code-got-callerid-as-remotedest: 07976852817

* ANI from gateway***

2011-04-28 11:21:14,457 DEBUG [http-8080-Processor23]
controller.IVRCalleridLookup - [CCM_IVR]::srcdir: en_US
sessionid:7F3B87AB3547DE93DE6AA993C6CC2E72

2011-04-28 11:21:14,457 DEBUG [http-8080-Processor23]
controller.IVRCalleridLookup - [CCM_IVR]::remotedest: 07976852817
sessionid:7F3B87AB3547DE93DE6AA993C6CC2E72

2011-04-28 11:21:14,458 DEBUG [http-8080-Processor23]
controller.IVRCalleridLookup - [CCM_IVR]::Host: 10.10.210.10:8080

2011-04-28 11:21:14,458 DEBUG [http-8080-Processor23]
controller.IVRCalleridLookup - [CCM_IVR]::Content-Type
application/x-www-form-urlencoded

2011-04-28 11:21:14,458 DEBUG [http-8080-Processor23]
controller.IVRCalleridLookup - [CCM_IVR]::Connection: close

2011-04-28 11:21:14,459 DEBUG [http-8080-Processor23]
controller.IVRCalleridLookup - [CCM_IVR]::Accept: text/vxml, text/x-vxml,
application/vxml, application/x-vxml, application/voicexml,
application/x-voicexml, text/plain, text/html, audio/basic, audio/wav,
multipart/form-data, application/octet-stream

2011-04-28 11:21:14,459 DEBUG [http-8080-Processor23]
controller.IVRCalleridLookup - [CCM_IVR]::User-Agent: Cisco-IOS-C2800NM/12.4

2011-04-28 11:21:14,459 DEBUG [http-8080-Processor23] util.IVRDBInterface -
[CCM_IVR]<--- getUserIdFromRemoteDestination- DB Query -->   remoteDest  =
07976852817

2011-04-28 11:21:14,460 DEBUG [http-8080-Processor23] util.IVRDBInterface -
[CCM_IVR] new code

2011-04-28 11:21:14,462 DEBUG [http-8080-Processor23] util.IVRDBInterface -
[CCM_IVR]<--- isPartialMatchEnabled --DB Query -->   sql:  = select
paramValue from processconfig where paramName ='RemDestCallerIDMatchType'
and tkService ='0'

2011-04-28 11:21:14,486 DEBUG [http-8080-Processor23] util.IVRDBInterface -
[CCM_IVR]<--- isPartialMatchEnabled --DB Query -->
RemDestCallerIDMatchType:  = 1

2011-04-28 11:21:14,487 DEBUG [http-8080-Processor23] util.IVRDBInterface -
[CCM_IVR]<--- getUserIdFromRemoteDestination()  -- partial match enabled

2011-04-28 11:21:14,487 DEBUG [http-8080-Processor23] util.IVRDBInterface -
[CCM_IVR]<--- getUserIdFromRemoteDestination()  --DB Query -->   sql:  =
select destination , fkdevice_remotedestinationtemplate , fkdevice_dualmode
, fkdevice_mobilesmartclient from remotedestination where destination LIKE
'%07976852817'

*compare RDP with ANI, should be LIKE 852817 (6 digits) but the whole number
is compared***

2011-04-28 11:21:14,490 DEBUG [http-8080-Processor23] util.IVRDBInterface -
[CCM_IVR]<--- getUserIdFromRemoteDestination -- FAILED: Fetch statement
failed: No current row


2011/5/8 donny f 

> hi exp,
>
> I tried to config :   MVA partial match.
>
> - I have specify RD : 408-555-7890
> - And I call from PSTN (555-7890)  to extension 5002
> - Service parameter  "Matching CallerID : Partial"  &  Number of Digit  : 7
> "
>
>  however it still prompt me for "Remote Dest Number" and "Pin" ?
> what I have missed here ? (I have restart the MVA service and UCM)
>
>
> tks
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>

Re: [OSL | CCIE_Voice] Vpim Testing in Home lab

[Bartosz Sokolowski]

Hi,

Thanks,for the link.
It works, I mean I got the demo license but unfortunately VPIM still doen't
work :(
When I was installing the license I got:
"A license tag in a license file was found to be invalid. Tag
LicVPIMisLicensed in file CXN1EVAL20110507082911621.lic is not supported.
This tag will be ignored, but the remainder of the license file will be
processed. If you believe the tag in this file should be valid, please
contact support personnel."

-- 
Regards,
Bartosz


2011/5/7 Bill Lake 

> Not completely sure if this still works but I think you can use a demo
> license for 90 days.
>
>
> https://tools.cisco.com/SWIFT/Licensing/PrivateRegistrationServlet?DemoKeys=Y
>
>
>
> On Sat, May 7, 2011 at 7:17 AM, amit batra  wrote:
>
>> Hello Everyone
>>
>> i know a lot of people study for CCIE Voice using their own hardware (
>> I am doing the same).
>>
>> I was just wondering that how people practice VPIM ? I use same version of
>> CUCM and unity as shown in Vik's video's..
>>
>> When ever i try to configure VPIM i get license violation error message ..
>>
>> Is there any workaround ? or i will need to buy license for that ??
>>
>> Any advice on that ?
>>
>> Thanks in advance.
>>
>> Regards
>> Amit
>>
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] More troubleshooting in the exam - How to use Internal Error Codes with CLI

[Bartosz Sokolowski]

Hi

If you enable logging to a IOS buffer you can easily get IEC.
Just put:
logging buffered 256000 ! 256000 is buffer size in bytes I believe
voice iec syslog

If something goes wrong you'll get syslog in buffer.
To see it: show logging

I just tested it :)
-- 
Regards,
Bartosz

2011/5/7 Bill Lake 

> You will see the IEC errors at other points in your troubleshooting.
> You can then use those for your purposes.
>
> I believe realtime is only supported with syslog
>
> On Sat, May 7, 2011 at 5:36 AM, Roig Borrell, Francesc Xavier
>  wrote:
> > Hi all,
> >
> >
> >
> > As the current exam has more troubleshooting requirement I was reviewing
> > “Cisco IOS Voice Troubleshooting and Monitoring Guide, Release 12.4T”
> >
> >
> >
> > There is a very feature “Cisco VoIP Internal Error Codes” that gives
> great
> > information about  why a gateway or gatekeeper release or refuse a call
> or a
> > call attempt, and for example, can clearly can detail the problem of a
> codec
> > mismatch or address resolution like this way
> >
> >
> >
> >
> >
> > Router# show voice iec description 1.1.128.1.5.0
> >
> >
> >
> > IEC Version:1
> >
> > Entity:1 (Gateway)
> >
> > Category:128 (Destination address resolution failure)
> >
> > Subsystem:1 (CCAPI)
> >
> > Error:5 (No dial peer match)
> >
> > Diagnostic Code:0
> >
> >
> >
> >
> >
> >
> http://www.cisco.com/en/US/docs/ios/voice/monitor/configuration/guide/vt_voip_err_cds_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1037799
> >
> >
> >
> > However, It seems we need a syslog server. I have not been able to get
> the
> > IECs just using CLI. Does anyone know how to do it? This would be
> absolutely
> > very helpful in the exam!
> >
> >
> >
> > Thanks in advance,
> >
> > Francesc
> >
> >
> >
> > ___
> > For more information regarding industry leading CCIE Lab training, please
> > visit www.ipexpert.com
> >
> > Are you a CCNP or CCIE and looking for a job? Check out
> > www.PlatinumPlacement.com
> >
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] 7975 Firmware file not loading

[Bartosz Sokolowski]

Hi Ashar,

Just wanted to share that "timezone problem" is a known bug in CCM 7.1x -
please refer to BugToolkit for CSCtc53574
The solution is to use "marked" timezones in CCM Date/Time group but it's
not true for all cases. I used Europe/Praque and have different time on 3911
than on 7962s and 7911s. I changed do Europe/Amsterdam and worked as
expected.
-- 
Best regards,
Bartosz

2010/4/14 Ashar Siddiqui 

>  Hi all,
>
> One of our customer had an issue with his 3x 7975 phones. The phones are
> showing an incorrect time (they are showing GMT) while all other phones in
> the same device pool are showing correct time BST (GMT+1). I looked at the
> display debugs of the phone and found that its looking for the firmware file
> SCCP-7975-sccp.8-3-4SR1. This file is at TFTP and the device pack is also 
> cmterm-devicepack6.0.1.1102-1which
> is fine. The phone cannot get the firmware from TFTP. I even upgraded the
> firmware to cmterm-7975-sccp.8-5-2.cop.sgn but phone is still looking for
> the old file. The device default is reflecting the new file and I also
> mentioned the phone load at the device as well but phone is not searching
> for new firmware. Did factory reset etc but no joy. Anyone who coan throw
> some light on this please?
>
> --
> Thanks,
> Ashar Siddiqui
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Services where to host? Pub or Sub?

[Bartosz Sokolowski]

Hello,

A question regarding services of any kind like Personal Address Book, Extension 
Mobility etc.
I can configure any server in a cluster to host services. In real world I 
prefer to put one of the subscribers to host such services. If the server goes 
down I can quickly reconfigure the service to another sub or even pub by 
changing the URL. If the service is to be put on Pub and the server goes down 
there is nothing we can do about it - no URL reconfig possible.
Is this rule of putting services on sub is good or bad for the LAB?
-- 
Best regards,
Bartosz Sokolowski


--
Doladuj w promocji telefon!
Sprawdz >> http://link.interia.pl/f1f18

Re: [OSL | CCIE_Voice] Callmanager to unity integration problem

[Bartosz Sokolowski]

Hello,Remember one important thing.On Unity side default CallManager Device name prefix is "CiscoUM1-VI" and unity atomatically adds port number to that eg. 1,2,3 and so on.On CCM side default port name prefix is "CiscoUM1" and CCM adds "-VIx" suffix for that, where x is a port number (1,2,3 and so on).Maybe that's the issue?-- Best regards,Bartosz SokolowskiHi Mike,I can ping from both sidesDefault setting is used, Device names is displayed like Cisco-UM1-VI1I checked service activation page and all of services is runningI deleted integration, and create it again but again during installation I couldn't verify it.
So still same error msg.Any idea?Jeremy



--

Znajdź mieszkanie w Twoim regionie!

kliknij >>> http://link.interia.pl/f1f19

Re: [OSL | CCIE_Voice] Help Needed: cannot define port numbers for Cisco unity 4.0 callmanager cluster intigration.

[Bartosz Sokolowski]

Hello,Check if UnityInstall is a Unity admin (I think defaut it is not). Remember UnityInstall must be a Unity subscriber to become Unity Admin.Login to SA interface, go to Subscribers. Load UnityInstall account and check Class of service. Default for admin is {Default Administrator}.Next go to Subscribers | Class of service then System Access and verify if "Cisco Unity Administrator application access " is checked.-- Best regards,Bartosz Sokolowskijeremy co napisał(a):Hi,

What u mean by logging in as admin? I already logged in with
"unityinstall" account to windows and also I think this account is used
to access SA page, IE don't ask me about user & pass just logged me
automatically.

So I assumed that I logged in to unity as an admin already.If I'm wrong plz correct me.By the way , I tried EAdmin , Unity Admin as well same result.I used grantaccessunity tool before, to assign privilege to new created account , but unityinstall, Eadmin, Unityadmin already has privilege , So Why I need to assign privilege to them again?
I tought taht I logged as admin to unity by using one of these accounts already( unityinstall, Eadmin, Unityadmin) Am I wrong?

Regards,

JeremyOn Mon, Sep 22, 2008 at 12:03 AM, Bartosz Soko?owski <[EMAIL PROTECTED]> wrote:
Hello Jeremy,

> when I add cluster under , Telephone Integration Manager , then I could
> not modify port configuration since it was disabled.so cannot add port
> numbers.
>
> I got this error when I want to open " Telephone Integration Manager" :
>
> "Some information will not be modifiable because either a connection
> could not be established to the unity server or your user id is not
> configured as a Unity Administrator"
>
> I logged in by unityinstall account and use demo license for unity.
>
> So how can I modify ports on unity?

The error message states exactly what the problem is. Probably you are using
wrong account for UTIM. The problem is that your Windows account must have
an associated Unity subscriber that has Unity administrative rights.
In other words login to Unity (to WinOS) using an account which is Unity
admin (for SA/WWW interface), eg UnityAdmin, Eadmin or whatever you have
chosen during the installation. If you can't (windows says that interactive
login is not allowed) add this user to local administrators windows group.
You can also try Diagnostic Tool | Grant Unity Access.
--
Best regards,
Bartosz Sokolowski

--
Doladuj telefon szybko i bezpiecznie.
Sprawdz >>  http://link.interia.pl/f1f02





--

>> Sprawdz swoja najblizsza przyszlosc!

>> http://link.interia.pl/f1f0b   

Re: [OSL | CCIE_Voice] Unity Call Queueing

[Bartosz Sokolowski]

Hi Stephen,

> Try the following as a starter, it can be enhanced for a more friendly
> interaction, by adding a call handler. It will queue the call and
> continually try the extension.
> 
> Create subscriber - SC x2003
> Subscriber->greetings - set 'after greeting' to 'Attempt transfer for SC'
   ^^^
That was it. I forgot to click 'Attempt to trasfer' it a window where you 
choose Subscriber.
Many thanks! The solution works fine.
-- 
Bartosz Sokolowski


--
Gdzie warto jechac na urlop? Sprawdz!
kliknij >>> http://link.interia.pl/f1e32

Re: [OSL | CCIE_Voice] Unity Call Queueing

[Bartosz Sokolowski]

Basically I'd like to use Unity for queueing, the problem is I don't  
know how to force Unity to queue call if it is directed to a busy  
number from CCM. It works only if I call Unity and then within Unity I  
call busy number.
I tried to send a call to a call handler after subscriber greeting and  
then in call handler send it back to subscriber via supervise call  
transfer but it doesn't work :(. I mean the only option available is  
"leave a message", no option to choose holding.

--
Bartosz Sokolowski


Without using an external application such as Contact Center  
Express, the
only way you could queue the call on CallManager is using the  
Attendant
Console Hunt Group functionality. You would have to put the  
subscribers you
want to queue calls into a Hunt Group and have an AC Pilot  
Number(s). It
would be quite painful if you wanted to roll this out to a large  
number of

subscribers, but just for John at ext 101 it would be ok.


Vik Malhi - CCIE #13890
Senior Technical Instructor - IPexpert, Inc.

Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: [EMAIL PROTECTED]

Join our free online support and peer group communities:
http://www.IPexpert.com/communities

IPexpert - The Global Leader in Self-Study, Classroom-Based, Video- 
On-Demand
and Audio Certification Training Tools for the Cisco CCIE R&S Lab,  
CCIE
Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE  
Storage

Lab Certifications.


-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bartosz
Sokolowski
Sent: Friday, June 13, 2008 9:20 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Unity Call Queueing

Hello,

I'd like to configure Unity in such way that if I call busy subscriber
directly I'd like the call to be queued waiting for subscriber to  
become

available.
So for example if I call John at 101 I hear something like "John is  
busy, if

you want to wait press 1".
For now this functionality works only if I call Unity at pilot  
number eg.
199 and then within Unity call subscriber extension 101. If I call  
directly

101 I only hear something like "Sorry John is not available, leave a
message".
Anyone has an idea how to queue calls without calling Unity pilot  
number?

--
Best regards,
Bartosz Sokolowski



--
Jeste¶ Polakiem i mieszkasz za granica? Sprawdz!
kliknij >>> http://link.interia.pl/f1e38

[OSL | CCIE_Voice] Unity Call Queueing

[Bartosz Sokolowski]

Hello,

I'd like to configure Unity in such way that if I call busy subscriber directly 
I'd like the call to be queued waiting for subscriber to become available.
So for example if I call John at 101 I hear something like "John is busy, if 
you want to wait press 1".
For now this functionality works only if I call Unity at pilot number eg. 199 
and then within Unity call subscriber extension 101. If I call directly 101 I 
only hear something like "Sorry John is not available, leave a message".
Anyone has an idea how to queue calls without calling Unity pilot number?
-- 
Best regards,
Bartosz Sokolowski

--
Tania telefonia internetowa!
Sprawdz >>>  http://link.interia.pl/f1e2e

[OSL | CCIE_Voice] What versions of Unity Express and MSFC software should we expect on LAB exam?

[Bartosz Sokolowski]

Hello everyone,

I'm preparing my lab for voice CCIE and basically I'm not sure what software 
should I put on Unity Express and MSFC card on C6500. Cisco doesn't state that 
on lab equipment page 
(http://www.cisco.com/web/learning/le3/ccie/voice/lab_equipment.html)
Any suggestions?
-- 
Best regards,
Bartek


--
Podbij Dziki Zachod!Gra strategiczna online
Sprawdz >>> http://link.interia.pl/f1dff