[OSL | CCIE_Voice] RE : BUG ????? QoS with MLP LFI

2011-02-21 Thread Friderich Claude 
and imagine a similar question during the lab and Proctor reboots your routers 
before testing your config.
you gonna get a zero not only for the QoS question because the branch router 
will not be accessible anymore  

I tried with different ios but what I know is that during the lab they should 
use the IOS 12.4(20)T2
and see below 12.4(24)T2, same behaviour 

Regards,

Claude
 Message d'origine
De: Ilya Rubinchik [mailto:ilya.rubinc...@followmars.com]
Date: mar. 2/22/2011 5:32
À: Friderich Claude; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Objet : RE: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI
 
I saw the same multiple times. Checked all configs with R&S CCIE sitting near, 
but nothing helped.
Probably it's just IOS issue. ?


--
Best regards,
Ilya Rubinchik
Chief UC Engineer
Mars Solutions Ltd.

Skype: im_citius
Mob: +998 (97) 712-8456
Office: +998 (71) 290-7364

From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Friderich Claude
Sent: Tuesday, February 22, 2011 1:42 AM
To: Miron Kobelski; Roger Källberg; ccieid...@gmail.com
Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI

Hello guys,

First, thanks a lot guys for your reply.

For Miron,

Respecting your different steps, it works and virtual-access becomes up 
immediately ?
But after rebooting the routers, down again ?

I have configured the MLP LFI manually instead of  using auto-qos ..  The same 
behavior . reboot .. Protocol down

Finally, Miron a quicker step while  conserving auto qos config on each site :
interface Serial0/1/0.1 point-to-point
bandwidth 768
ip ospf mtu-ignore
snmp trap link-status
no  frame-relay interface-dlci 102 ppp Virtual-Template100 wing steps :

interface Serial0/1/0
shutdown
no ip address
encapsulation frame-relay IETF
frame-relay traffic-shaping
frame-relay lmi-type ansi
ip rsvp bandwidth

and no shut and frame-relay again of course

For Roger and ccieid1ot, hereby my config if you have any comments, don't 
hesitate

Thanks in advance,

Regards

Claude Friderich
PreSales Support
[ccvp_voice_sm]
NETCORE PSF S.A.
49 rue du Baerendall
B.P.65 L-8201 Mamer
Téléphone: 31 33 80-407
Fax: 31 33 80 8-407
GSM: 621 303 616
E-mail: cfrider...@netcore.lu

From: Miron Kobelski [mailto:findko...@gmail.com]
Sent: lundi 21 février 2011 17:30
To: Friderich Claude
Cc: ccie_voice-boun...@onlinestudylist.com; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI

Claude,

I've seen this happen. What I'd recommend:

sh run (to keep old config)
no frame-relay interface-dlci X (to remove all fr config)
shut interface (to remove DLCIs learned from the FR switch)
frame-relay interface-dlci X
no shut
auto qos ...

then, check show ppp multilink ... to verify if multilink bundles are active.

let us know... any better ideas?

regards
kobel




On Mon, Feb 21, 2011 at 16:25, Friderich Claude 
mailto:cfrider...@netcore.lu>> wrote:
Hello Guys,

Does anybody  already encountered the problem with Virtual access  ??

Let me explain ...

As I configure qos with MLP LFI between hq and br2 everything was working fine 
!!!

After rebooting, no serial access anymore between hq and br2...

With  show ip interface brief I have the following protocol state :

HQ
Interface IP-AddressOK? 
  Method   StatusProtocol
Virtual-Access1 10.10.112.1YES
TFTP up   down

BR2
Interface IP-AddressOK? 
  Method   StatusProtocol
Virtual-Access1 10.10.112.2YES
TFTP up   down

It's not the first time !!! I tried to change the IOS but in vain.  The same 
behavior with IOS 12.4(20)T2,T1  and 12.4(24)T2.

If something like this happens during the lab, what can I do   Just ask the 
proctor and tell him that I have an unexpected behavior and that I'm sure about 
the qos config ?

I have usually this type of behavior after rebooting my routers.

Any comments or solutions would be appreciated.

Regards

Claude.

Claude Friderich
PreSales Support
[ccvp_voice_sm]
NETCORE PSF S.A.
49 rue du Baerendall
B.P.65 L-8201 Mamer
Téléphone: 31 33 80-407
Fax: 31 33 80 8-407
GSM: 621 303 616
E-mail: cfrider...@netcore.lu


--

This email was Anti Virus checked.



Disclaimer

The information in this Internet e-mail is confidential and may be legally 
privileged. It is intended solely for the addressee. Access to this Internet 
e-mail by anyone else is unauthorized. If you are not the intended recipient, 
any di

Re: [OSL | CCIE_Voice] RE : BUG ????? QoS with MLP LFI

2011-02-22 Thread Stutz, Bernhard 
Why should your proctor reboot the router?

I would imagine that the proctors know about this bug otherwise nobody will 
ever solve this lab where this questions comes up with (if they really reboot 
the routers) and I think that should make them mindful.

 

Von: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] Im Auftrag von Friderich Claude
Gesendet: Dienstag, 22. Februar 2011 07:07
An: Ilya Rubinchik; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Betreff: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI

 

and imagine a similar question during the lab and Proctor reboots your routers 
before testing your config.
you gonna get a zero not only for the QoS question because the branch router 
will not be accessible anymore 

I tried with different ios but what I know is that during the lab they should 
use the IOS 12.4(20)T2
and see below 12.4(24)T2, same behaviour 

Regards,

Claude
 Message d'origine
De: Ilya Rubinchik [mailto:ilya.rubinc...@followmars.com]
Date: mar. 2/22/2011 5:32
À: Friderich Claude; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Objet : RE: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI

I saw the same multiple times. Checked all configs with R&S CCIE sitting near, 
but nothing helped.
Probably it's just IOS issue. ?


--
Best regards,
Ilya Rubinchik
Chief UC Engineer
Mars Solutions Ltd.

Skype: im_citius
Mob: +998 (97) 712-8456
Office: +998 (71) 290-7364

From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Friderich Claude
Sent: Tuesday, February 22, 2011 1:42 AM
To: Miron Kobelski; Roger Källberg; ccieid...@gmail.com
Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI

Hello guys,

First, thanks a lot guys for your reply.

For Miron,

Respecting your different steps, it works and virtual-access becomes up 
immediately ?
But after rebooting the routers, down again ?

I have configured the MLP LFI manually instead of  using auto-qos ..  The same 
behavior . reboot .. Protocol down

Finally, Miron a quicker step while  conserving auto qos config on each site :
interface Serial0/1/0.1 point-to-point
bandwidth 768
ip ospf mtu-ignore
snmp trap link-status
no  frame-relay interface-dlci 102 ppp Virtual-Template100 wing steps :

interface Serial0/1/0
shutdown
no ip address
encapsulation frame-relay IETF
frame-relay traffic-shaping
frame-relay lmi-type ansi
ip rsvp bandwidth

and no shut and frame-relay again of course

For Roger and ccieid1ot, hereby my config if you have any comments, don't 
hesitate

Thanks in advance,

Regards

Claude Friderich
PreSales Support
[ccvp_voice_sm]
NETCORE PSF S.A.
49 rue du Baerendall
B.P.65 L-8201 Mamer
Téléphone: 31 33 80-407
Fax: 31 33 80 8-407
GSM: 621 303 616
E-mail: cfrider...@netcore.lu<mailto:cfrider...@netcore.lu>

From: Miron Kobelski [mailto:findko...@gmail.com]
Sent: lundi 21 février 2011 17:30
To: Friderich Claude
Cc: ccie_voice-boun...@onlinestudylist.com; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI

Claude,

I've seen this happen. What I'd recommend:

sh run (to keep old config)
no frame-relay interface-dlci X (to remove all fr config)
shut interface (to remove DLCIs learned from the FR switch)
frame-relay interface-dlci X
no shut
auto qos ...

then, check show ppp multilink ... to verify if multilink bundles are active.

let us know... any better ideas?

regards
kobel




On Mon, Feb 21, 2011 at 16:25, Friderich Claude 
mailto:cfrider...@netcore.lu>> wrote:
Hello Guys,

Does anybody  already encountered the problem with Virtual access  ??

Let me explain ...

As I configure qos with MLP LFI between hq and br2 everything was working fine 
!!!

After rebooting, no serial access anymore between hq and br2...

With  show ip interface brief I have the following protocol state :

HQ
Interface IP-AddressOK? 
  Method   StatusProtocol
Virtual-Access1 10.10.112.1YES
TFTP up   down

BR2
Interface IP-AddressOK? 
  Method   StatusProtocol
Virtual-Access1 10.10.112.2YES
TFTP up   down

It's not the first time !!! I tried to change the IOS but in vain.  The same 
behavior with IOS 12.4(20)T2,T1  and 12.4(24)T2.

If something like this happens during the lab, what can I do   Just ask the 
proctor and tell him that I have an unexpected behavior and that I'

Re: [OSL | CCIE_Voice] RE : BUG ????? QoS with MLP LFI

2011-02-22 Thread Friderich Claude 
It's the case for routing switching. They commonly reboot the routers.
 
But I don't know if they do the same for Voice 
 
Regards
 
Claude Friderich
PreSales Support
 
NETCORE PSF S.A.
49 rue du Baerendall
B.P.65 L-8201 Mamer
Téléphone: 31 33 80-407
Fax: 31 33 80 8-407
GSM: 621 303 616
E-mail: cfrider...@netcore.lu <mailto:cfrider...@netcore.lu> 
 
From: Stutz, Bernhard [mailto:st...@pandacom.de] 
Sent: mardi 22 février 2011 10:52
To: Friderich Claude; Ilya Rubinchik; Miron Kobelski; Roger Källberg; 
ccieid...@gmail.com
Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Subject: AW: [OSL | CCIE_Voice] RE : BUG ????? QoS with MLP LFI
 
Why should your proctor reboot the router?
I would imagine that the proctors know about this bug otherwise nobody will 
ever solve this lab where this questions comes up with (if they really reboot 
the routers) and I think that should make them mindful.
 
Von: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] Im Auftrag von Friderich Claude
Gesendet: Dienstag, 22. Februar 2011 07:07
An: Ilya Rubinchik; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Betreff: [OSL | CCIE_Voice] RE : BUG ????? QoS with MLP LFI
 
and imagine a similar question during the lab and Proctor reboots your routers 
before testing your config.
you gonna get a zero not only for the QoS question because the branch router 
will not be accessible anymore 

I tried with different ios but what I know is that during the lab they should 
use the IOS 12.4(20)T2
and see below 12.4(24)T2, same behaviour 

Regards,

Claude
 Message d'origine
De: Ilya Rubinchik [mailto:ilya.rubinc...@followmars.com]
Date: mar. 2/22/2011 5:32
À: Friderich Claude; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Objet : RE: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI

I saw the same multiple times. Checked all configs with R&S CCIE sitting near, 
but nothing helped.
Probably it's just IOS issue. ?


--
Best regards,
Ilya Rubinchik
Chief UC Engineer
Mars Solutions Ltd.

Skype: im_citius
Mob: +998 (97) 712-8456
Office: +998 (71) 290-7364

From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Friderich Claude
Sent: Tuesday, February 22, 2011 1:42 AM
To: Miron Kobelski; Roger Källberg; ccieid...@gmail.com
Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI

Hello guys,

First, thanks a lot guys for your reply.

For Miron,

Respecting your different steps, it works and virtual-access becomes up 
immediately ?
But after rebooting the routers, down again ?

I have configured the MLP LFI manually instead of  using auto-qos ..  The same 
behavior . reboot .. Protocol down

Finally, Miron a quicker step while  conserving auto qos config on each site :
interface Serial0/1/0.1 point-to-point
bandwidth 768
ip ospf mtu-ignore
snmp trap link-status
no  frame-relay interface-dlci 102 ppp Virtual-Template100 wing steps :

interface Serial0/1/0
shutdown
no ip address
encapsulation frame-relay IETF
frame-relay traffic-shaping
frame-relay lmi-type ansi
ip rsvp bandwidth

and no shut and frame-relay again of course

For Roger and ccieid1ot, hereby my config if you have any comments, don't 
hesitate

Thanks in advance,

Regards

Claude Friderich
PreSales Support
[ccvp_voice_sm]
NETCORE PSF S.A.
49 rue du Baerendall
B.P.65 L-8201 Mamer
Téléphone: 31 33 80-407
Fax: 31 33 80 8-407
GSM: 621 303 616
E-mail: cfrider...@netcore.lu<mailto:cfrider...@netcore.lu>

From: Miron Kobelski [mailto:findko...@gmail.com]
Sent: lundi 21 février 2011 17:30
To: Friderich Claude
Cc: ccie_voice-boun...@onlinestudylist.com; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI

Claude,

I've seen this happen. What I'd recommend:

sh run (to keep old config)
no frame-relay interface-dlci X (to remove all fr config)
shut interface (to remove DLCIs learned from the FR switch)
frame-relay interface-dlci X
no shut
auto qos ...

then, check show ppp multilink ... to verify if multilink bundles are active.

let us know... any better ideas?

regards
kobel




On Mon, Feb 21, 2011 at 16:25, Friderich Claude 
mailto:cfrider...@netcore.lu>> wrote:
Hello Guys,

Does anybody  already encountered the problem with Virtual access  ??

Let me explain ...

As I configure qos with MLP LFI between hq and br2 everything was working fine 
!!!

After rebooting, no serial access anymore between hq and br2...

With  show ip interface brief I have the following protocol state :

HQ
Interface IP-AddressOK? 
  Method   StatusProtoc

Re: [OSL | CCIE_Voice] RE : BUG ????? QoS with MLP LFI

2011-02-22 Thread mihal caro 
Hi there

Yes they can reboot the router at anytime you have to explain the issue to
proctor, however he is not going to help you. I had similar issues here
and I found out that the Serial Interface was fake. I replaced the serial
module with Cisco orginal and it worked.



 regards.



On 22 February 2011 09:52, Stutz, Bernhard  wrote:

>  Why should your proctor reboot the router?
>
> I would imagine that the proctors know about this bug otherwise nobody will
> ever solve this lab where this questions comes up with (if they really
> reboot the routers) and I think that should make them mindful.
>
>
>
> *Von:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *Im Auftrag von *Friderich Claude
> *Gesendet:* Dienstag, 22. Februar 2011 07:07
> *An:* Ilya Rubinchik; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
>
> *Cc:* ccie_voice@onlinestudylist.com;
> ccie_voice-boun...@onlinestudylist.com
> *Betreff:* [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI
>
>
>
> and imagine a similar question during the lab and Proctor reboots your
> routers before testing your config.
> you gonna get a zero not only for the QoS question because the branch
> router will not be accessible anymore 
>
> I tried with different ios but what I know is that during the lab they
> should use the IOS 12.4(20)T2
> and see below 12.4(24)T2, same behaviour 
>
> Regards,
>
> Claude
>  Message d'origine
> De: Ilya Rubinchik 
> [mailto:ilya.rubinc...@followmars.com
> ]
> Date: mar. 2/22/2011 5:32
> À: Friderich Claude; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
> Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
> Objet : RE: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI
>
> I saw the same multiple times. Checked all configs with R&S CCIE sitting
> near, but nothing helped.
> Probably it's just IOS issue. ?
>
>
> --
> Best regards,
> Ilya Rubinchik
> Chief UC Engineer
> Mars Solutions Ltd.
>
> Skype: im_citius
> Mob: +998 (97) 712-8456
> Office: +998 (71) 290-7364
>
> From: ccie_voice-boun...@onlinestudylist.com [
> mailto:ccie_voice-boun...@onlinestudylist.com]
> On Behalf Of Friderich Claude
> Sent: Tuesday, February 22, 2011 1:42 AM
> To: Miron Kobelski; Roger Källberg; ccieid...@gmail.com
> Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
> Subject: Re: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI
>
> Hello guys,
>
> First, thanks a lot guys for your reply.
>
> For Miron,
>
> Respecting your different steps, it works and virtual-access becomes up
> immediately ?
> But after rebooting the routers, down again ?
>
> I have configured the MLP LFI manually instead of  using auto-qos ..  The
> same behavior . reboot .. Protocol down
>
> Finally, Miron a quicker step while  conserving auto qos config on each
> site :
> interface Serial0/1/0.1 point-to-point
> bandwidth 768
> ip ospf mtu-ignore
> snmp trap link-status
> no  frame-relay interface-dlci 102 ppp Virtual-Template100 wing steps :
>
> interface Serial0/1/0
> shutdown
> no ip address
> encapsulation frame-relay IETF
> frame-relay traffic-shaping
> frame-relay lmi-type ansi
> ip rsvp bandwidth
>
> and no shut and frame-relay again of course
>
> For Roger and ccieid1ot, hereby my config if you have any comments, don't
> hesitate
>
> Thanks in advance,
>
> Regards
>
> Claude Friderich
> PreSales Support
> [ccvp_voice_sm]
> NETCORE PSF S.A.
> 49 rue du Baerendall
> B.P.65 L-8201 Mamer
> Téléphone: 31 33 80-407
> Fax: 31 33 80 8-407
> GSM: 621 303 616
> E-mail: 
> cfrider...@netcore.lu<mailto:cfrider...@netcore.lu
> >
>
> From: Miron Kobelski [mailto:findko...@gmail.com ]
> Sent: lundi 21 février 2011 17:30
> To: Friderich Claude
> Cc: ccie_voice-boun...@onlinestudylist.com; ccie_voice@onlinestudylist.com
> Subject: Re: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI
>
> Claude,
>
> I've seen this happen. What I'd recommend:
>
> sh run (to keep old config)
> no frame-relay interface-dlci X (to remove all fr config)
> shut interface (to remove DLCIs learned from the FR switch)
> frame-relay interface-dlci X
> no shut
> auto qos ...
>
> then, check show ppp multilink ... to verify if multilink bundles are
> active.
>
> let us know... any better ideas?
>
> regards
> kobel
>
>
>
>
> On Mon, Feb 21, 2011 at 16:25, Friderich Claude  mailto:cfrider...@netcore.lu >> wrote:
> Hello Guys,
>
> Does anybody  already encountered the problem with Virtual access  ??
>
> Let me explain ...
>

Re: [OSL | CCIE_Voice] RE : BUG ????? QoS with MLP LFI

2011-02-22 Thread Stutz, Bernhard 
Okay then we have to trust that they all use Cisco original equip at their labs 
or make sure to have a Cisco original interface available at the remote site 
wherever it is ;-)

 

Von: mihal caro [mailto:mihalc...@gmail.com] 
Gesendet: Dienstag, 22. Februar 2011 12:00
An: Stutz, Bernhard
Cc: Friderich Claude; Ilya Rubinchik; Miron Kobelski; Roger Källberg; 
ccieid...@gmail.com; ccie_voice@onlinestudylist.com; 
ccie_voice-boun...@onlinestudylist.com
Betreff: Re: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI

 

Hi there

 

Yes they can reboot the router at anytime you have to explain the issue to 
proctor, however he is not going to help you. I had similar issues here and I 
found out that the Serial Interface was fake. I replaced the serial module with 
Cisco orginal and it worked. 

 

 

 

 regards.



 

On 22 February 2011 09:52, Stutz, Bernhard  wrote:



Why should your proctor reboot the router?

I would imagine that the proctors know about this bug otherwise nobody will 
ever solve this lab where this questions comes up with (if they really reboot 
the routers) and I think that should make them mindful.

 

Von: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] Im Auftrag von Friderich Claude
Gesendet: Dienstag, 22. Februar 2011 07:07
An: Ilya Rubinchik; Miron Kobelski; Roger Källberg; ccieid...@gmail.com 


Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com

Betreff: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI 

 

and imagine a similar question during the lab and Proctor reboots your routers 
before testing your config.
you gonna get a zero not only for the QoS question because the branch router 
will not be accessible anymore 

I tried with different ios but what I know is that during the lab they should 
use the IOS 12.4(20)T2
and see below 12.4(24)T2, same behaviour 

Regards,

Claude
 Message d'origine
De: Ilya Rubinchik [mailto:ilya.rubinc...@followmars.com]
Date: mar. 2/22/2011 5:32
À: Friderich Claude; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Objet : RE: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI

I saw the same multiple times. Checked all configs with R&S CCIE sitting near, 
but nothing helped.
Probably it's just IOS issue. ?


--
Best regards,
Ilya Rubinchik
Chief UC Engineer
Mars Solutions Ltd.

Skype: im_citius
Mob: +998 (97) 712-8456
Office: +998 (71) 290-7364

From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Friderich Claude
Sent: Tuesday, February 22, 2011 1:42 AM
To: Miron Kobelski; Roger Källberg; ccieid...@gmail.com
Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI

Hello guys,

First, thanks a lot guys for your reply.

For Miron,

Respecting your different steps, it works and virtual-access becomes up 
immediately ?
But after rebooting the routers, down again ?

I have configured the MLP LFI manually instead of  using auto-qos ..  The same 
behavior . reboot .. Protocol down

Finally, Miron a quicker step while  conserving auto qos config on each site :
interface Serial0/1/0.1 point-to-point
bandwidth 768
ip ospf mtu-ignore
snmp trap link-status
no  frame-relay interface-dlci 102 ppp Virtual-Template100 wing steps :

interface Serial0/1/0
shutdown
no ip address
encapsulation frame-relay IETF
frame-relay traffic-shaping
frame-relay lmi-type ansi
ip rsvp bandwidth

and no shut and frame-relay again of course

For Roger and ccieid1ot, hereby my config if you have any comments, don't 
hesitate

Thanks in advance,

Regards

Claude Friderich
PreSales Support
[ccvp_voice_sm]
NETCORE PSF S.A.
49 rue du Baerendall
B.P.65 L-8201 Mamer
Téléphone: 31 33 80-407
Fax: 31 33 80 8-407
GSM: 621 303 616
E-mail: cfrider...@netcore.lu<mailto:cfrider...@netcore.lu>

From: Miron Kobelski [mailto:findko...@gmail.com]
Sent: lundi 21 février 2011 17:30
To: Friderich Claude
Cc: ccie_voice-boun...@onlinestudylist.com; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI

Claude,

I've seen this happen. What I'd recommend:

sh run (to keep old config)
no frame-relay interface-dlci X (to remove all fr config)
shut interface (to remove DLCIs learned from the FR switch)
frame-relay interface-dlci X
no shut
auto qos ...

then, check show ppp multilink ... to verify if multilink bundles are active.

let us know... any better ideas?

regards
kobel




On Mon, Feb 21, 2011 at 16:25, Friderich Claude 
mailto:cfrider...@netcore.lu>> wrote:
Hello Guys,

Does anybody  already encountered the problem with Virtual access  ??

Let me explain ...

As I configure qos with MLP LFI between hq and br2 everything was working fine 
!!!

After rebooting, no serial access anymore between hq and br2...

With  show ip inte

Re: [OSL | CCIE_Voice] RE : BUG ????? QoS with MLP LFI

2011-02-22 Thread Ilya Rubinchik 
Just runned into this issue on my today vRack.
Again MLP interface stopped to work after BR1 router reboot.

`sh frame map’ command on HQ states that pvc is in Deleted state, but it PSTN 
and BR1 router it was in Active.
Rebooting PSTN and HQ routers didn’t helped.
Tried to recreate the pvc subinterface, but nope again.

IOS versions was exactly the same on all routers, 124-20.T1.
So I cannot say this is IOS incompatibility.

This is not my first wasted voucher because of this error.

Can guys from PLabs help or explain something?

Thanks in advance

--
Best regards,
Ilya Rubinchik
Chief UC Engineer
Mars Solutions Ltd.

Skype: im_citius
Mob: +998 (97) 712-8456
Office: +998 (71) 290-7364

From: mihal caro [mailto:mihalc...@gmail.com]
Sent: Tuesday, February 22, 2011 4:00 PM
To: Stutz, Bernhard
Cc: Friderich Claude; Ilya Rubinchik; Miron Kobelski; Roger Källberg; 
ccieid...@gmail.com; ccie_voice@onlinestudylist.com; 
ccie_voice-boun...@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI

Hi there

Yes they can reboot the router at anytime you have to explain the issue to 
proctor, however he is not going to help you. I had similar issues here and I 
found out that the Serial Interface was fake. I replaced the serial module with 
Cisco orginal and it worked.



 regards.



On 22 February 2011 09:52, Stutz, Bernhard 
mailto:st...@pandacom.de>> wrote:
Why should your proctor reboot the router?
I would imagine that the proctors know about this bug otherwise nobody will 
ever solve this lab where this questions comes up with (if they really reboot 
the routers) and I think that should make them mindful.

Von: 
ccie_voice-boun...@onlinestudylist.com<mailto:ccie_voice-boun...@onlinestudylist.com>
 
[mailto:ccie_voice-boun...@onlinestudylist.com<mailto:ccie_voice-boun...@onlinestudylist.com>]
 Im Auftrag von Friderich Claude
Gesendet: Dienstag, 22. Februar 2011 07:07
An: Ilya Rubinchik; Miron Kobelski; Roger Källberg; 
ccieid...@gmail.com<mailto:ccieid...@gmail.com>

Cc: ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com>; 
ccie_voice-boun...@onlinestudylist.com<mailto:ccie_voice-boun...@onlinestudylist.com>
Betreff: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI


and imagine a similar question during the lab and Proctor reboots your routers 
before testing your config.
you gonna get a zero not only for the QoS question because the branch router 
will not be accessible anymore 

I tried with different ios but what I know is that during the lab they should 
use the IOS 12.4(20)T2
and see below 12.4(24)T2, same behaviour 

Regards,

Claude
 Message d'origine
De: Ilya Rubinchik [mailto:ilya.rubinc...@followmars.com]
Date: mar. 2/22/2011 5:32
À: Friderich Claude; Miron Kobelski; Roger Källberg; 
ccieid...@gmail.com<mailto:ccieid...@gmail.com>
Cc: ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com>; 
ccie_voice-boun...@onlinestudylist.com<mailto:ccie_voice-boun...@onlinestudylist.com>
Objet : RE: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI

I saw the same multiple times. Checked all configs with R&S CCIE sitting near, 
but nothing helped.
Probably it's just IOS issue. ?


--
Best regards,
Ilya Rubinchik
Chief UC Engineer
Mars Solutions Ltd.

Skype: im_citius
Mob: +998 (97) 712-8456
Office: +998 (71) 290-7364

From: 
ccie_voice-boun...@onlinestudylist.com<mailto:ccie_voice-boun...@onlinestudylist.com>
 [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Friderich Claude
Sent: Tuesday, February 22, 2011 1:42 AM
To: Miron Kobelski; Roger Källberg; 
ccieid...@gmail.com<mailto:ccieid...@gmail.com>
Cc: ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com>; 
ccie_voice-boun...@onlinestudylist.com<mailto:ccie_voice-boun...@onlinestudylist.com>
Subject: Re: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI

Hello guys,

First, thanks a lot guys for your reply.

For Miron,

Respecting your different steps, it works and virtual-access becomes up 
immediately ?
But after rebooting the routers, down again ?

I have configured the MLP LFI manually instead of  using auto-qos ..  The same 
behavior . reboot .. Protocol down

Finally, Miron a quicker step while  conserving auto qos config on each site :
interface Serial0/1/0.1 point-to-point
bandwidth 768
ip ospf mtu-ignore
snmp trap link-status
no  frame-relay interface-dlci 102 ppp Virtual-Template100 wing steps :

interface Serial0/1/0
shutdown
no ip address
encapsulation frame-relay IETF
frame-relay traffic-shaping
frame-relay lmi-type ansi
ip rsvp bandwidth

and no shut and frame-relay again of course

For Roger and ccieid1ot, hereby my config if you have any comments, don't 
hesitate

Thanks in advance,

Regards

Claude Friderich
PreSales Support
[ccvp_voice_sm]
NETCORE PSF S.A.
49 rue du Baerendall
B.P.65 L-8201 Mamer
Téléphone: 31 33 80-407
Fax: 31 33 80 8

Re: [OSL | CCIE_Voice] RE : BUG ????? QoS with MLP LFI

2011-02-22 Thread George Goglidze 
Could we maybe write EEM script???

that would check if MLP is down, and do the necessary steps to bring it up?
It's a bit of overreaction I think, because the Proctors are probably very
much aware of the problem.

Regards,

On Tue, Feb 22, 2011 at 9:52 AM, Stutz, Bernhard  wrote:

>  Why should your proctor reboot the router?
>
> I would imagine that the proctors know about this bug otherwise nobody will
> ever solve this lab where this questions comes up with (if they really
> reboot the routers) and I think that should make them mindful.
>
>
>
> *Von:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *Im Auftrag von *Friderich Claude
> *Gesendet:* Dienstag, 22. Februar 2011 07:07
> *An:* Ilya Rubinchik; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
>
> *Cc:* ccie_voice@onlinestudylist.com;
> ccie_voice-boun...@onlinestudylist.com
> *Betreff:* [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI
>
>
>
> and imagine a similar question during the lab and Proctor reboots your
> routers before testing your config.
> you gonna get a zero not only for the QoS question because the branch
> router will not be accessible anymore 
>
> I tried with different ios but what I know is that during the lab they
> should use the IOS 12.4(20)T2
> and see below 12.4(24)T2, same behaviour 
>
> Regards,
>
> Claude
>  Message d'origine
> De: Ilya Rubinchik 
> [mailto:ilya.rubinc...@followmars.com
> ]
> Date: mar. 2/22/2011 5:32
> À: Friderich Claude; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
> Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
> Objet : RE: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI
>
> I saw the same multiple times. Checked all configs with R&S CCIE sitting
> near, but nothing helped.
> Probably it's just IOS issue. ?
>
>
> --
> Best regards,
> Ilya Rubinchik
> Chief UC Engineer
> Mars Solutions Ltd.
>
> Skype: im_citius
> Mob: +998 (97) 712-8456
> Office: +998 (71) 290-7364
>
> From: ccie_voice-boun...@onlinestudylist.com [
> mailto:ccie_voice-boun...@onlinestudylist.com]
> On Behalf Of Friderich Claude
> Sent: Tuesday, February 22, 2011 1:42 AM
> To: Miron Kobelski; Roger Källberg; ccieid...@gmail.com
> Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
> Subject: Re: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI
>
> Hello guys,
>
> First, thanks a lot guys for your reply.
>
> For Miron,
>
> Respecting your different steps, it works and virtual-access becomes up
> immediately ?
> But after rebooting the routers, down again ?
>
> I have configured the MLP LFI manually instead of  using auto-qos ..  The
> same behavior . reboot .. Protocol down
>
> Finally, Miron a quicker step while  conserving auto qos config on each
> site :
> interface Serial0/1/0.1 point-to-point
> bandwidth 768
> ip ospf mtu-ignore
> snmp trap link-status
> no  frame-relay interface-dlci 102 ppp Virtual-Template100 wing steps :
>
> interface Serial0/1/0
> shutdown
> no ip address
> encapsulation frame-relay IETF
> frame-relay traffic-shaping
> frame-relay lmi-type ansi
> ip rsvp bandwidth
>
> and no shut and frame-relay again of course
>
> For Roger and ccieid1ot, hereby my config if you have any comments, don't
> hesitate
>
> Thanks in advance,
>
> Regards
>
> Claude Friderich
> PreSales Support
> [ccvp_voice_sm]
> NETCORE PSF S.A.
> 49 rue du Baerendall
> B.P.65 L-8201 Mamer
> Téléphone: 31 33 80-407
> Fax: 31 33 80 8-407
> GSM: 621 303 616
> E-mail: 
> cfrider...@netcore.lu<mailto:cfrider...@netcore.lu
> >
>
> From: Miron Kobelski [mailto:findko...@gmail.com ]
> Sent: lundi 21 février 2011 17:30
> To: Friderich Claude
> Cc: ccie_voice-boun...@onlinestudylist.com; ccie_voice@onlinestudylist.com
> Subject: Re: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI
>
> Claude,
>
> I've seen this happen. What I'd recommend:
>
> sh run (to keep old config)
> no frame-relay interface-dlci X (to remove all fr config)
> shut interface (to remove DLCIs learned from the FR switch)
> frame-relay interface-dlci X
> no shut
> auto qos ...
>
> then, check show ppp multilink ... to verify if multilink bundles are
> active.
>
> let us know... any better ideas?
>
> regards
> kobel
>
>
>
>
> On Mon, Feb 21, 2011 at 16:25, Friderich Claude  mailto:cfrider...@netcore.lu >> wrote:
> Hello Guys,
>
> Does anybody  already encountered the problem with Virtual access  ??
>
> Let me explain ...
>
> As I configure qos with MLP LFI b

Re: [OSL | CCIE_Voice] RE : BUG ????? QoS with MLP LFI

2011-02-22 Thread George Goglidze 
he probably meant the cabling rather than the actual interfaces...

On Tue, Feb 22, 2011 at 5:19 PM, Friderich Claude wrote:

>  Hi Caro,
>
>
>
> What do you mean by Cisco Original ?
>
>
>
> Regards
>
> Claude
>
>
>
> *Claude Friderich*
>
> *PreSales Support*
>
> *[image: ccvp_voice_sm]***
>
> *NETCORE PSF S.A.***
>
> 49 rue du Baerendall
>
> B.P.65 L-8201 Mamer
>
> Téléphone: 31 33 80-407
>
> Fax: 31 33 80 8-407
>
> GSM: 621 303 616
>
> E-mail: cfrider...@netcore.lu
>
>
>
> *From:* mihal caro [mailto:mihalc...@gmail.com]
> *Sent:* mardi 22 février 2011 12:00
> *To:* Stutz, Bernhard
> *Cc:* Friderich Claude; Ilya Rubinchik; Miron Kobelski; Roger Källberg;
> ccieid...@gmail.com; ccie_voice@onlinestudylist.com;
> ccie_voice-boun...@onlinestudylist.com
> *Subject:* Re: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI
>
>
>
> Hi there
>
>
>
> Yes they can reboot the router at anytime you have to explain the issue to
> proctor, however he is not going to help you. I had similar issues here
> and I found out that the Serial Interface was fake. I replaced the serial
> module with Cisco orginal and it worked.
>
>
>
>
>
>
>
>  regards.
>
>
>
>
>
> On 22 February 2011 09:52, Stutz, Bernhard  wrote:
>
> Why should your proctor reboot the router?
>
> I would imagine that the proctors know about this bug otherwise nobody will
> ever solve this lab where this questions comes up with (if they really
> reboot the routers) and I think that should make them mindful.
>
>
>
> *Von:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *Im Auftrag von *Friderich Claude
> *Gesendet:* Dienstag, 22. Februar 2011 07:07
> *An:* Ilya Rubinchik; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
>
>
> *Cc:* ccie_voice@onlinestudylist.com;
> ccie_voice-boun...@onlinestudylist.com
>
> *Betreff:* [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI
>
>
>
> and imagine a similar question during the lab and Proctor reboots your
> routers before testing your config.
> you gonna get a zero not only for the QoS question because the branch
> router will not be accessible anymore 
>
> I tried with different ios but what I know is that during the lab they
> should use the IOS 12.4(20)T2
> and see below 12.4(24)T2, same behaviour 
>
> Regards,
>
> Claude
>  Message d'origine
> De: Ilya Rubinchik 
> [mailto:ilya.rubinc...@followmars.com
> ]
> Date: mar. 2/22/2011 5:32
> À: Friderich Claude; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
> Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
> Objet : RE: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI
>
> I saw the same multiple times. Checked all configs with R&S CCIE sitting
> near, but nothing helped.
> Probably it's just IOS issue. ?
>
>
> --
> Best regards,
> Ilya Rubinchik
> Chief UC Engineer
> Mars Solutions Ltd.
>
> Skype: im_citius
> Mob: +998 (97) 712-8456
> Office: +998 (71) 290-7364
>
> From: ccie_voice-boun...@onlinestudylist.com [
> mailto:ccie_voice-boun...@onlinestudylist.com]
> On Behalf Of Friderich Claude
> Sent: Tuesday, February 22, 2011 1:42 AM
> To: Miron Kobelski; Roger Källberg; ccieid...@gmail.com
> Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
> Subject: Re: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI
>
> Hello guys,
>
> First, thanks a lot guys for your reply.
>
> For Miron,
>
> Respecting your different steps, it works and virtual-access becomes up
> immediately ?
> But after rebooting the routers, down again ?
>
> I have configured the MLP LFI manually instead of  using auto-qos ..  The
> same behavior . reboot .. Protocol down
>
> Finally, Miron a quicker step while  conserving auto qos config on each
> site :
> interface Serial0/1/0.1 point-to-point
> bandwidth 768
> ip ospf mtu-ignore
> snmp trap link-status
> no  frame-relay interface-dlci 102 ppp Virtual-Template100 wing steps :
>
> interface Serial0/1/0
> shutdown
> no ip address
> encapsulation frame-relay IETF
> frame-relay traffic-shaping
> frame-relay lmi-type ansi
> ip rsvp bandwidth
>
> and no shut and frame-relay again of course
>
> For Roger and ccieid1ot, hereby my config if you have any comments, don't
> hesitate
>
> Thanks in advance,
>
> Regards
>
> Claude Friderich
> PreSales Support
> [ccvp_voice_sm]
> NETCORE PSF S.A.
> 49 rue du Baerendall
> B.P.65 L-8201 Mamer
> Téléphone: 31 33 80-407
> Fax: 31 33 80 8-407
> GSM: 621 303 616

Re: [OSL | CCIE_Voice] RE : BUG ????? QoS with MLP LFI

2011-02-22 Thread mihal caro 
The interfaces

90% of the WIC-1T interfaces that are on ebay are  fake they don't come from
Cisco but from china cloned.So maybe you are working on a fake ones. I have
Cisco WIC-1T original and they all work after reboot.

regards

On 22 February 2011 17:19, Friderich Claude  wrote:

>  Hi Caro,
>
>
>
> What do you mean by Cisco Original ?
>
>
>
> Regards
>
> Claude
>
>
>
> *Claude Friderich*
>
> *PreSales Support*
>
> *[image: ccvp_voice_sm]***
>
> *NETCORE PSF S.A.***
>
> 49 rue du Baerendall
>
> B.P.65 L-8201 Mamer
>
> Téléphone: 31 33 80-407
>
> Fax: 31 33 80 8-407
>
> GSM: 621 303 616
>
> E-mail: cfrider...@netcore.lu
>
>
>
> *From:* mihal caro [mailto:mihalc...@gmail.com]
> *Sent:* mardi 22 février 2011 12:00
> *To:* Stutz, Bernhard
> *Cc:* Friderich Claude; Ilya Rubinchik; Miron Kobelski; Roger Källberg;
> ccieid...@gmail.com; ccie_voice@onlinestudylist.com;
> ccie_voice-boun...@onlinestudylist.com
> *Subject:* Re: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI
>
>
>
> Hi there
>
>
>
> Yes they can reboot the router at anytime you have to explain the issue to
> proctor, however he is not going to help you. I had similar issues here
> and I found out that the Serial Interface was fake. I replaced the serial
> module with Cisco orginal and it worked.
>
>
>
>
>
>
>
>  regards.
>
>
>
>
>
> On 22 February 2011 09:52, Stutz, Bernhard  wrote:
>
> Why should your proctor reboot the router?
>
> I would imagine that the proctors know about this bug otherwise nobody will
> ever solve this lab where this questions comes up with (if they really
> reboot the routers) and I think that should make them mindful.
>
>
>
> *Von:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *Im Auftrag von *Friderich Claude
> *Gesendet:* Dienstag, 22. Februar 2011 07:07
> *An:* Ilya Rubinchik; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
>
>
> *Cc:* ccie_voice@onlinestudylist.com;
> ccie_voice-boun...@onlinestudylist.com
>
> *Betreff:* [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI
>
>
>
> and imagine a similar question during the lab and Proctor reboots your
> routers before testing your config.
> you gonna get a zero not only for the QoS question because the branch
> router will not be accessible anymore 
>
> I tried with different ios but what I know is that during the lab they
> should use the IOS 12.4(20)T2
> and see below 12.4(24)T2, same behaviour 
>
> Regards,
>
> Claude
>  Message d'origine
> De: Ilya Rubinchik 
> [mailto:ilya.rubinc...@followmars.com
> ]
> Date: mar. 2/22/2011 5:32
> À: Friderich Claude; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
> Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
> Objet : RE: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI
>
> I saw the same multiple times. Checked all configs with R&S CCIE sitting
> near, but nothing helped.
> Probably it's just IOS issue. ?
>
>
> --
> Best regards,
> Ilya Rubinchik
> Chief UC Engineer
> Mars Solutions Ltd.
>
> Skype: im_citius
> Mob: +998 (97) 712-8456
> Office: +998 (71) 290-7364
>
> From: ccie_voice-boun...@onlinestudylist.com [
> mailto:ccie_voice-boun...@onlinestudylist.com]
> On Behalf Of Friderich Claude
> Sent: Tuesday, February 22, 2011 1:42 AM
> To: Miron Kobelski; Roger Källberg; ccieid...@gmail.com
> Cc: ccie_voice@onlinestudylist.com; ccie_voice-boun...@onlinestudylist.com
> Subject: Re: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI
>
> Hello guys,
>
> First, thanks a lot guys for your reply.
>
> For Miron,
>
> Respecting your different steps, it works and virtual-access becomes up
> immediately ?
> But after rebooting the routers, down again ?
>
> I have configured the MLP LFI manually instead of  using auto-qos ..  The
> same behavior . reboot .. Protocol down
>
> Finally, Miron a quicker step while  conserving auto qos config on each
> site :
> interface Serial0/1/0.1 point-to-point
> bandwidth 768
> ip ospf mtu-ignore
> snmp trap link-status
> no  frame-relay interface-dlci 102 ppp Virtual-Template100 wing steps :
>
> interface Serial0/1/0
> shutdown
> no ip address
> encapsulation frame-relay IETF
> frame-relay traffic-shaping
> frame-relay lmi-type ansi
> ip rsvp bandwidth
>
> and no shut and frame-relay again of course
>
> For Roger and ccieid1ot, hereby my config if you have any comments, don't
> hesitate
>
> Thanks in advance,
>
> Regards
>
> Claude Friderich
> PreSales Support
>

Re: [OSL | CCIE_Voice] RE : BUG ????? QoS with MLP LFI

2011-02-22 Thread ShinGei Yong 
Hi Caro,

So what you're trying to said is that,this MLP LFI issue could be
potentially caused by the non-genuine WIC instead
of an IOS bugs?

shingei

On Wed, Feb 23, 2011 at 3:22 AM, mihal caro  wrote:

>
> The interfaces
>
> 90% of the WIC-1T interfaces that are on ebay are  fake they don't come
> from Cisco but from china cloned.So maybe you are working on a fake ones. I
> have Cisco WIC-1T original and they all work after reboot.
>
> regards
>
>
> On 22 February 2011 17:19, Friderich Claude  wrote:
>
>>  Hi Caro,
>>
>>
>>
>> What do you mean by Cisco Original ?
>>
>>
>>
>> Regards
>>
>> Claude
>>
>>
>>
>> *Claude Friderich*
>>
>> *PreSales Support*
>>
>> *[image: ccvp_voice_sm]***
>>
>> *NETCORE PSF S.A.***
>>
>> 49 rue du Baerendall
>>
>> B.P.65 L-8201 Mamer
>>
>> Téléphone: 31 33 80-407
>>
>> Fax: 31 33 80 8-407
>>
>> GSM: 621 303 616
>>
>> E-mail: cfrider...@netcore.lu
>>
>>
>>
>> *From:* mihal caro [mailto:mihalc...@gmail.com]
>> *Sent:* mardi 22 février 2011 12:00
>> *To:* Stutz, Bernhard
>> *Cc:* Friderich Claude; Ilya Rubinchik; Miron Kobelski; Roger Källberg;
>> ccieid...@gmail.com; ccie_voice@onlinestudylist.com;
>> ccie_voice-boun...@onlinestudylist.com
>> *Subject:* Re: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI
>>
>>
>>
>> Hi there
>>
>>
>>
>> Yes they can reboot the router at anytime you have to explain the issue to
>> proctor, however he is not going to help you. I had similar issues here
>> and I found out that the Serial Interface was fake. I replaced the serial
>> module with Cisco orginal and it worked.
>>
>>
>>
>>
>>
>>
>>
>>  regards.
>>
>>
>>
>>
>>
>> On 22 February 2011 09:52, Stutz, Bernhard  wrote:
>>
>> Why should your proctor reboot the router?
>>
>> I would imagine that the proctors know about this bug otherwise nobody
>> will ever solve this lab where this questions comes up with (if they really
>> reboot the routers) and I think that should make them mindful.
>>
>>
>>
>> *Von:* ccie_voice-boun...@onlinestudylist.com [mailto:
>> ccie_voice-boun...@onlinestudylist.com] *Im Auftrag von *Friderich Claude
>> *Gesendet:* Dienstag, 22. Februar 2011 07:07
>> *An:* Ilya Rubinchik; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
>>
>>
>> *Cc:* ccie_voice@onlinestudylist.com;
>> ccie_voice-boun...@onlinestudylist.com
>>
>> *Betreff:* [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI
>>
>>
>>
>> and imagine a similar question during the lab and Proctor reboots your
>> routers before testing your config.
>> you gonna get a zero not only for the QoS question because the branch
>> router will not be accessible anymore 
>>
>> I tried with different ios but what I know is that during the lab they
>> should use the IOS 12.4(20)T2
>> and see below 12.4(24)T2, same behaviour 
>>
>> Regards,
>>
>> Claude
>>  Message d'origine
>> De: Ilya Rubinchik 
>> [mailto:ilya.rubinc...@followmars.com
>> ]
>> Date: mar. 2/22/2011 5:32
>> À: Friderich Claude; Miron Kobelski; Roger Källberg; ccieid...@gmail.com
>> Cc: ccie_voice@onlinestudylist.com;
>> ccie_voice-boun...@onlinestudylist.com
>> Objet : RE: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI
>>
>> I saw the same multiple times. Checked all configs with R&S CCIE sitting
>> near, but nothing helped.
>> Probably it's just IOS issue. ?
>>
>>
>> --
>> Best regards,
>> Ilya Rubinchik
>> Chief UC Engineer
>> Mars Solutions Ltd.
>>
>> Skype: im_citius
>> Mob: +998 (97) 712-8456
>> Office: +998 (71) 290-7364
>>
>> From: ccie_voice-boun...@onlinestudylist.com [
>> mailto:ccie_voice-boun...@onlinestudylist.com]
>> On Behalf Of Friderich Claude
>> Sent: Tuesday, February 22, 2011 1:42 AM
>> To: Miron Kobelski; Roger Källberg; ccieid...@gmail.com
>> Cc: ccie_voice@onlinestudylist.com;
>> ccie_voice-boun...@onlinestudylist.com
>> Subject: Re: [OSL | CCIE_Voice] BUG ? QoS with MLP LFI
>>
>> Hello guys,
>>
>> First, thanks a lot guys for your reply.
>>
>> For Miron,
>>
>> Respecting your different steps, it works and virtual-access becomes up
>> immediately ?
>> But after rebooting the routers, down again ?

Re: [OSL | CCIE_Voice] RE : BUG ????? QoS with MLP LFI

2011-02-24 Thread bkvalent...@gmail.com 
Are you using frts or mqc based shaping?   I believe I saw this behaviour when 
trying to use mqc based shaping. 

- Reply message -
From: "Ilya Rubinchik" 
Date: Thu, Feb 24, 2011 12:16 am
Subject: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI
To: "Friderich Claude" , "ShinGei Yong" 
, "mihal caro" , 
"ccie_voice@onlinestudylist.com" 

Thanks for clarification, will try it today.

But you mean, that MPL, which is very common technology in the RL, just cannot 
come-up automagically after router reboots?
It sounds strange. ☺


--
Best regards,
Ilya Rubinchik
Chief UC Engineer
Mars Solutions Ltd.

Skype: im_citius
Mob: +998 (97) 712-8456
Office: +998 (71) 290-7364

From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Friderich Claude
Sent: Thursday, February 24, 2011 1:28 AM
To: ShinGei Yong; mihal caro; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI

Guys,

My Lab is 100 percent Cisco  guarantee


After making more tests, I can confirm that :

If I only reboot  a couple of times BR2 router, virtual access becomes up after 
each reboot

But rebooting a couple of times HQ router,  the virtual access is going to be 
down after each reboot

Conclusion:
On HQ, Just have to put the command line 
and shut the Serial interface  0/1/0 and put the command   and no shut  to make it work again


Hope this can help you during the real lab …  Think it’s the easiest solution 
to make it work …. Have to keep this in mind ☺
And again, thanks to all for your remarks and suggestions

Regards

Claude.

Claude Friderich
PreSales Support
[ccvp_voice_sm]
NETCORE PSF S.A.
49 rue du Baerendall
B.P.65 L-8201 Mamer
Téléphone: 31 33 80-407
Fax: 31 33 80 8-407
GSM: 621 303 616
E-mail: cfrider...@netcore.lu<mailto:cfrider...@netcore.lu>

From: ShinGei Yong [mailto:shingei.y...@gmail.com]
Sent: mercredi 23 février 2011 06:40
To: mihal caro; Friderich Claude; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI

Hi Caro,

So what you're trying to said is that,this MLP LFI issue could be potentially 
caused by the non-genuine WIC instead
of an IOS bugs?

shingei
On Wed, Feb 23, 2011 at 3:22 AM, mihal caro 
mailto:mihalc...@gmail.com>> wrote:

The interfaces

90% of the WIC-1T interfaces that are on ebay are  fake they don't come from 
Cisco but from china cloned.So maybe you are working on a fake ones. I have 
Cisco WIC-1T original and they all work after reboot.

regards

On 22 February 2011 17:19, Friderich Claude 
mailto:cfrider...@netcore.lu>> wrote:
Hi Caro,

What do you mean by Cisco Original ?

Regards
Claude

Claude Friderich
PreSales Support
[ccvp_voice_sm]
NETCORE PSF S.A.
49 rue du Baerendall
B.P.65 L-8201 Mamer
Téléphone: 31 33 80-407
Fax: 31 33 80 8-407
GSM: 621 303 616
E-mail: cfrider...@netcore.lu<mailto:cfrider...@netcore.lu>

From: mihal caro [mailto:mihalc...@gmail.com<mailto:mihalc...@gmail.com>]
Sent: mardi 22 février 2011 12:00
To: Stutz, Bernhard
Cc: Friderich Claude; Ilya Rubinchik; Miron Kobelski; Roger Källberg; 
ccieid...@gmail.com<mailto:ccieid...@gmail.com>; 
ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com>; 
ccie_voice-boun...@onlinestudylist.com<mailto:ccie_voice-boun...@onlinestudylist.com>
Subject: Re: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI

Hi there

Yes they can reboot the router at anytime you have to explain the issue to 
proctor, however he is not going to help you. I had similar issues here and I 
found out that the Serial Interface was fake. I replaced the serial module with 
Cisco orginal and it worked.



 regards.



On 22 February 2011 09:52, Stutz, Bernhard 
mailto:st...@pandacom.de>> wrote:
Why should your proctor reboot the router?
I woG5___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] RE : BUG ????? QoS with MLP LFI

2011-02-24 Thread Ilya Rubinchik 
Yes, this is MQC.
As per lab requirements – class-based WAN marking and policing.


--
Best regards,
Ilya Rubinchik
Chief UC Engineer
Mars Solutions Ltd.

Skype: im_citius
Mob: +998 (97) 712-8456
Office: +998 (71) 290-7364

From: bkvalent...@gmail.com [mailto:bkvalent...@gmail.com]
Sent: Thursday, February 24, 2011 5:27 PM
To: Ilya Rubinchik; Friderich Claude; ShinGei Yong; mihal caro; 
ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI

Are you using frts or mqc based shaping?   I believe I saw this behaviour when 
trying to use mqc based shaping.

- Reply message -
From: "Ilya Rubinchik" 
Date: Thu, Feb 24, 2011 12:16 am
Subject: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI
To: "Friderich Claude" , "ShinGei Yong" 
, "mihal caro" , 
"ccie_voice@onlinestudylist.com" 

Thanks for clarification, will try it today.

But you mean, that MPL, which is very common technology in the RL, just cannot 
come-up automagically after router reboots?
It sounds strange. ☺


--
Best regards,
Ilya Rubinchik
Chief UC Engineer
Mars Solutions Ltd.

Skype: im_citius
Mob: +998 (97) 712-8456
Office: +998 (71) 290-7364

From: 
ccie_voice-boun...@onlinestudylist.com<mailto:ccie_voice-boun...@onlinestudylist.com>
 
[mailto:ccie_voice-boun...@onlinestudylist.com]<mailto:[mailto:ccie_voice-boun...@onlinestudylist.com]>
 On Behalf Of Friderich Claude
Sent: Thursday, February 24, 2011 1:28 AM
To: ShinGei Yong; mihal caro; 
ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com>
Subject: Re: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI

Guys,

My Lab is 100 percent Cisco  guarantee


After making more tests, I can confirm that :

If I only reboot  a couple of times BR2 router, virtual access becomes up after 
each reboot

But rebooting a couple of times HQ router,  the virtual access is going to be 
down after each reboot

Conclusion:
On HQ, Just have to put the command line 
and shut the Serial interface  0/1/0 and put the command   and no shut  to make it work again


Hope this can help you during the real lab …  Think it’s the easiest solution 
to make it work …. Have to keep this in mind ☺
And again, thanks to all for your remarks and suggestions

Regards

Claude.

Claude Friderich
PreSales Support
[ccvp_voice_sm]
NETCORE PSF S.A.
49 rue du Baerendall
B.P.65 L-8201 Mamer
Téléphone: 31 33 80-407
Fax: 31 33 80 8-407
GSM: 621 303 616
E-mail: 
cfrider...@netcore.lu<mailto:cfrider...@netcore.lu<mailto:cfrider...@netcore.lu%3cmailto:cfrider...@netcore.lu>>

From: ShinGei Yong 
[mailto:shingei.y...@gmail.com]<mailto:[mailto:shingei.y...@gmail.com]>
Sent: mercredi 23 février 2011 06:40
To: mihal caro; Friderich Claude; 
ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com>
Subject: Re: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI

Hi Caro,

So what you're trying to said is that,this MLP LFI issue could be potentially 
caused by the non-genuine WIC instead
of an IOS bugs?

shingei
On Wed, Feb 23, 2011 at 3:22 AM, mihal caro 
mailto:mihalc...@gmail.com<mailto:mihalc...@gmail.com%3cmailto:mihalc...@gmail.com>>>
 wrote:

The interfaces

90% of the WIC-1T interfaces that are on ebay are  fake they don't come from 
Cisco but from china cloned.So maybe you are working on a fake ones. I have 
Cisco WIC-1T original and they all work after reboot.

regards

On 22 February 2011 17:19, Friderich Claude 
mailto:cfrider...@netcore.lu<mailto:cfrider...@netcore.lu%3cmailto:cfrider...@netcore.lu>>>
 wrote:
Hi Caro,

What do you mean by Cisco Original ?

Regards
Claude

Claude Friderich
PreSales Support
[ccvp_voice_sm]
NETCORE PSF S.A.
49 rue du Baerendall
B.P.65 L-8201 Mamer
Téléphone: 31 33 80-407
Fax: 31 33 80 8-407
GSM: 621 303 616
E-mail: 
cfrider...@netcore.lu<mailto:cfrider...@netcore.lu<mailto:cfrider...@netcore.lu%3cmailto:cfrider...@netcore.lu>>

From: mihal caro 
[mailto:mihalc...@gmail.com<mailto:mihalc...@gmail.com>]<mailto:[mailto:mihalc...@gmail.com%3cmailto:mihalc...@gmail.com%3e]>
Sent: mardi 22 février 2011 12:00
To: Stutz, Bernhard
Cc: Friderich Claude; Ilya Rubinchik; Miron Kobelski; Roger Källberg; 
ccieid...@gmail.com<mailto:ccieid...@gmail.com<mailto:ccieid...@gmail.com%3cmailto:ccieid...@gmail.com>>;
 
ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com%3cmailto:ccie_voice@onlinestudylist.com>>;
 
ccie_voice-boun...@onlinestudylist.com<mailto:ccie_voice-boun...@onlinestudylist.com<mailto:ccie_voice-boun...@onlinestudylist.com%3cmailto:ccie_voice-boun...@onlinestudylist.com>>
Subject: Re: [OSL | CCIE_Voice] RE : BUG ? QoS with MLP LFI

Hi there

Yes they can reboot the router at anytime you have to explain the issue to 
proctor, however he is not going to help you. I had similar issues here