[OSL | CCIE_Voice] B-Channel Maintenance not working properly
Hi List, during my last Remote-Rack Sessions i noticed that the B-Channel Maintenance Status Parameter is not workking properly. Always when i configured it and restartet the CCM Srevice and the Gateway itself, it is working for some calls. And suddenly the Gateway is trying to call out over the not available B-Channels I configured the Maintenance Status the following ways: 1) S0/ds...@sda000332333241=0001 2) S0/ds...@sda000332333241 = 0001 But both of them did not work. What am i doing wrong here? /Robert
Re: [OSL | CCIE_Voice] B-Channel Maintenance not working properly
When you try this again what does Perfmon tell you the service of the channels? 0, 1, 2, 3? On Sun, Feb 22, 2009 at 11:07 AM, Robert Schuknecht rschukne...@gmx.dewrote: Hi List, during my last Remote-Rack Sessions i noticed that the B-Channel Maintenance Status Parameter is not workking properly. Always when i configured it and restartet the CCM Srevice and the Gateway itself, it is working for some calls. And suddenly the Gateway is trying to call out over the not available B-Channels I configured the Maintenance Status the following ways: 1) S0/ds...@sda000332333241=0001 2) S0/ds...@sda000332333241 = 0001 But both of them did not work. What am i doing wrong here? /Robert
Re: [OSL | CCIE_Voice] B-Channel Maintenance not working properly
Did you check off status polling on the device config for the circuit? On Feb 22, 2009, at 12:10 PM, Ryan Trauernicht wrote: When you try this again what does Perfmon tell you the service of the channels? 0, 1, 2, 3? On Sun, Feb 22, 2009 at 11:07 AM, Robert Schuknecht rschukne...@gmx.de wrote: Hi List, during my last Remote-Rack Sessions i noticed that the B-Channel Maintenance Status Parameter is not workking properly. Always when i configured it and restartet the CCM Srevice and the Gateway itself, it is working for some calls. And suddenly the Gateway is trying to call out over the not available B-Channels I configured the Maintenance Status the following ways: 1) S0/ds...@sda000332333241=0001 2) S0/ds...@sda000332333241 = 0001 But both of them did not work. What am i doing wrong here? /Robert
Re: [OSL | CCIE_Voice] B-Channel Maintenance not working properly
I've battled with this service parameter for over 5 years. It doesn't work properly- I would use Top-Down with a fractional PRI. But if you are trying to get it working you must ensure that you Enable Status Poll on the gateway page. Also- you could try including a space after every 4 bits (although I'm told that is not necessary, that is what I have always done since the example show this). So try this : (+ Enable Status Poll). S0/ds...@sda000332333241=0001 -- Vik Malhi CCIE #13890, CCSI #31584 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Robert Schuknecht rschukne...@gmx.de Date: 22 Feb 2009 18:07:17 +0100 To: OSL Group ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] B-Channel Maintenance not working properly Hi List, during my last Remote-Rack Sessions i noticed that the B-Channel Maintenance Status Parameter is not workking properly. Always when i configured it and restartet the CCM Srevice and the Gateway itself, it is working for some calls. And suddenly the Gateway is trying to call out over the not available B-Channels I configured the Maintenance Status the following ways: 1) S0/ds...@sda000332333241=0001 2) S0/ds...@sda000332333241 = 0001 But both of them did not work. What am i doing wrong here? /Robert
Re: [OSL | CCIE_Voice] B-Channel Maintenance not working properly
Agreed! It does not work well at all. I typically will have calls incoming / outgoing the 6608 PRI and make a call 1 hour later to find that the call fails. After a fitting Microsoft salute (reset), the call goies through... Scott Hardesty | Solutions Engineer | MidAtlantic | Presidio Networked Solutions 7601 Ora Glen Drive, Suite 100, Greenbelt, MD 20770 | mailto:sharde...@presidio.com D: 301.313.2041 | C: 443.789.1219 | http://www.presidio.com/ -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Vik Malhi Sent: Sunday, February 22, 2009 12:33 PM To: Robert Schuknecht; OSL Group Subject: Re: [OSL | CCIE_Voice] B-Channel Maintenance not working properly I've battled with this service parameter for over 5 years. It doesn't work properly- I would use Top-Down with a fractional PRI. But if you are trying to get it working you must ensure that you Enable Status Poll on the gateway page. Also- you could try including a space after every 4 bits (although I'm told that is not necessary, that is what I have always done since the example show this). So try this : (+ Enable Status Poll). S0/ds...@sda000332333241=0001 -- Vik Malhi - CCIE #13890, CCSI #31584 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Robert Schuknecht rschukne...@gmx.de Date: 22 Feb 2009 18:07:17 +0100 To: OSL Group ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] B-Channel Maintenance not working properly Hi List, during my last Remote-Rack Sessions i noticed that the B-Channel Maintenance Status Parameter is not workking properly. Always when i configured it and restartet the CCM Srevice and the Gateway itself, it is working for some calls. And suddenly the Gateway is trying to call out over the not available B-Channels I configured the Maintenance Status the following ways: 1) S0/ds...@sda000332333241=0001 2) S0/ds...@sda000332333241 = 0001 But both of them did not work. What am i doing wrong here? /Robert