Re: [OSL | CCIE_Voice] CAC RSVP Not enough bandwidth tip
Thanks suresh and all , Really this is what I have faced. Thanks again. Ravi On Fri, Aug 2, 2013 at 6:07 AM, Amdo Ngawa datapack...@gmail.com wrote: Suresh Bhandari's link is helpful Check if this helps: http://sureshbhandari.com.np/rsvp-configuration-and-errors/ Amdo On Tue, Jul 30, 2013 at 12:31 AM, ie ravindra ieravin...@gmail.comwrote: Hi Amdo, I have faced the same thing when I am in the real lab all local site calls went failed. But every thing correct. I can't understand the logic behind of that. Let me explain some workaround I did. I changed the location of Site C to Hub none in the lab in my lab day. then local calls goes out without issue. so try like this. create different location for Site A , Site B , and Site C. other than hub_none and Assign it to respective sites and assign required bandwidth. Then let me know what happens. I guess the problem is with hub none location. But let me know the results. Thanks, Ravi, On Mon, Jul 29, 2013 at 7:13 PM, Amdo Ngawa datapack...@gmail.comwrote: Hi Folks: I had been having trouble with CAC RSVP lately. Once I configured CAC RSVP between two sites, the calls between the two sides failed with error *Not enough bandwidth'* Checked my configuration thoroughly. Locations CAC configured; mrg and mrgls proper, mtp profiles fine; sccp and dspfarm created and registered with CUCM; all good to go. Found suggestions online, but most talked about proper configuration which I had already done. However, there was one quirky suggestion that I tried: Assuming CAC RSVP is between HQ and other site, I removed the hq-rsvp-mtp from the mrg-hq and inserted a default sub or pub (mtp_2,mtp_1) and saved. Thereafter I removed the default mtp from mrg-hq and reinserted the hq-mtp-rsvp and saved the changes and reset. For good measure, I clicked the resync-bandwidth for for both sites in the Location section (SettingsLocation) The calls started to work. show ip rsvp reservation and sh ip rsvp int showed output that I wanted. Thanks, Amdo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CAC RSVP Not enough bandwidth tip
all, only assign to phones for Location.. DO not need to put to DP or others port. I will create problem K From: ie ravindra ieravin...@gmail.com To: Amdo Ngawa datapack...@gmail.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Friday, August 2, 2013 7:29:25 AM Subject: Re: [OSL | CCIE_Voice] CAC RSVP Not enough bandwidth tip Thanks suresh and all , Really this is what I have faced. Thanks again. Ravi On Fri, Aug 2, 2013 at 6:07 AM, Amdo Ngawa datapack...@gmail.com wrote: Suresh Bhandari's link is helpful Check if this helps: http://sureshbhandari.com.np/rsvp-configuration-and-errors/ Amdo On Tue, Jul 30, 2013 at 12:31 AM, ie ravindra ieravin...@gmail.com wrote: Hi Amdo, I have faced the same thing when I am in the real lab all local site calls went failed. But every thing correct. I can't understand the logic behind of that. Let me explain some workaround I did. I changed the location of Site C to Hub none in the lab in my lab day. then local calls goes out without issue. so try like this. create different location for Site A , Site B , and Site C. other than hub_none and Assign it to respective sites and assign required bandwidth. Then let me know what happens. I guess the problem is with hub none location. But let me know the results. Thanks, Ravi, On Mon, Jul 29, 2013 at 7:13 PM, Amdo Ngawa datapack...@gmail.com wrote: Hi Folks: I had been having trouble with CAC RSVP lately. Once I configured CAC RSVP between two sites, the calls between the two sides failed with errorNot enough bandwidth' Checked my configuration thoroughly. Locations CAC configured; mrg and mrgls proper, mtp profiles fine; sccp and dspfarm created and registered with CUCM; all good to go. Found suggestions online, but most talked about proper configuration which I had already done. However, there was one quirky suggestion that I tried: Assuming CAC RSVP is between HQ and other site, I removed the hq-rsvp-mtp from the mrg-hq and inserted a default sub or pub (mtp_2,mtp_1) and saved. Thereafter I removed the default mtp from mrg-hq and reinserted the hq-mtp-rsvp and saved the changes and reset. For good measure, I clicked the resync-bandwidth for for both sites in the Location section (SettingsLocation) The calls started to work. show ip rsvp reservation and sh ip rsvp int showed output that I wanted. Thanks, Amdo ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.com/ Are you a CCNP or CCIE and looking for a job? Check out http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CAC RSVP Not enough bandwidth tip
Suresh Bhandari's link is helpful Check if this helps: http://sureshbhandari.com.np/rsvp-configuration-and-errors/ Amdo On Tue, Jul 30, 2013 at 12:31 AM, ie ravindra ieravin...@gmail.com wrote: Hi Amdo, I have faced the same thing when I am in the real lab all local site calls went failed. But every thing correct. I can't understand the logic behind of that. Let me explain some workaround I did. I changed the location of Site C to Hub none in the lab in my lab day. then local calls goes out without issue. so try like this. create different location for Site A , Site B , and Site C. other than hub_none and Assign it to respective sites and assign required bandwidth. Then let me know what happens. I guess the problem is with hub none location. But let me know the results. Thanks, Ravi, On Mon, Jul 29, 2013 at 7:13 PM, Amdo Ngawa datapack...@gmail.com wrote: Hi Folks: I had been having trouble with CAC RSVP lately. Once I configured CAC RSVP between two sites, the calls between the two sides failed with error *Not enough bandwidth'* Checked my configuration thoroughly. Locations CAC configured; mrg and mrgls proper, mtp profiles fine; sccp and dspfarm created and registered with CUCM; all good to go. Found suggestions online, but most talked about proper configuration which I had already done. However, there was one quirky suggestion that I tried: Assuming CAC RSVP is between HQ and other site, I removed the hq-rsvp-mtp from the mrg-hq and inserted a default sub or pub (mtp_2,mtp_1) and saved. Thereafter I removed the default mtp from mrg-hq and reinserted the hq-mtp-rsvp and saved the changes and reset. For good measure, I clicked the resync-bandwidth for for both sites in the Location section (SettingsLocation) The calls started to work. show ip rsvp reservation and sh ip rsvp int showed output that I wanted. Thanks, Amdo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CAC RSVP Not enough bandwidth tip
Hi Folks: I had been having trouble with CAC RSVP lately. Once I configured CAC RSVP between two sites, the calls between the two sides failed with error *Not enough bandwidth'* Checked my configuration thoroughly. Locations CAC configured; mrg and mrgls proper, mtp profiles fine; sccp and dspfarm created and registered with CUCM; all good to go. Found suggestions online, but most talked about proper configuration which I had already done. However, there was one quirky suggestion that I tried: Assuming CAC RSVP is between HQ and other site, I removed the hq-rsvp-mtp from the mrg-hq and inserted a default sub or pub (mtp_2,mtp_1) and saved. Thereafter I removed the default mtp from mrg-hq and reinserted the hq-mtp-rsvp and saved the changes and reset. For good measure, I clicked the resync-bandwidth for for both sites in the Location section (SettingsLocation) The calls started to work. show ip rsvp reservation and sh ip rsvp int showed output that I wanted. Thanks, Amdo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CAC RSVP Not enough bandwidth tip
Hi Amdo, I have faced the same thing when I am in the real lab all local site calls went failed. But every thing correct. I can't understand the logic behind of that. Let me explain some workaround I did. I changed the location of Site C to Hub none in the lab in my lab day. then local calls goes out without issue. so try like this. create different location for Site A , Site B , and Site C. other than hub_none and Assign it to respective sites and assign required bandwidth. Then let me know what happens. I guess the problem is with hub none location. But let me know the results. Thanks, Ravi, On Mon, Jul 29, 2013 at 7:13 PM, Amdo Ngawa datapack...@gmail.com wrote: Hi Folks: I had been having trouble with CAC RSVP lately. Once I configured CAC RSVP between two sites, the calls between the two sides failed with error *Not enough bandwidth'* Checked my configuration thoroughly. Locations CAC configured; mrg and mrgls proper, mtp profiles fine; sccp and dspfarm created and registered with CUCM; all good to go. Found suggestions online, but most talked about proper configuration which I had already done. However, there was one quirky suggestion that I tried: Assuming CAC RSVP is between HQ and other site, I removed the hq-rsvp-mtp from the mrg-hq and inserted a default sub or pub (mtp_2,mtp_1) and saved. Thereafter I removed the default mtp from mrg-hq and reinserted the hq-mtp-rsvp and saved the changes and reset. For good measure, I clicked the resync-bandwidth for for both sites in the Location section (SettingsLocation) The calls started to work. show ip rsvp reservation and sh ip rsvp int showed output that I wanted. Thanks, Amdo ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
