Re: [OSL | CCIE_Voice] FW: PSTN Gateway Backbone GK configuration
Thanks Marwa, I got the same at the below mentioned location. Seeing the configuration, I found that translation-profile is applied under voice-ports, however NO translation-profile is created; just seeing translation-rules??? Any advice! -Shadab From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of marwa Sent: Wednesday, October 22, 2008 3:51 PM To: Shadab Abbasi (moabbasi); ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] FW: PSTN Gateway Backbone GK configuration Hello, You can find the initial configurations for all the devices in the Proctor Labs support forum: http://proctorlabs.com/forum/ To access the forum, simply create a Proctor Labs account, which is free of charge, and use those credentials to enter the support forum. You'll find the configs you're looking for in the Voice FAQ section. Marwa - Original Message - From: Shadab Abbasi (moabbasi) mailto:[EMAIL PROTECTED] To: ccie_voice@onlinestudylist.com Sent: Wednesday, October 22, 2008 10:54 AM Subject: [OSL | CCIE_Voice] FW: PSTN Gateway Backbone GK configuration Hello Experts, I am setting up my LAB planning to run PSTN GW Backbone (PSTN) - GK on the same router (2821) Can someone help me out with the configuration or sample? Regards, Shadab
Re: [OSL | CCIE_Voice] FW: PSTN Gateway Backbone GK configuration
hello, here is the conf in the attachment Eng./ Marwa Ahmed , M.Sc. Systems Engineering of Egypt (S.E.E) CCVP Cisco IP Communications Support Specialist CCNP Senior Customer Support Engineer Tel : +2 02 22921100 Fax : +2 02 22901673 e-mail : [EMAIL PROTECTED] - Original Message - From: Shadab Abbasi (moabbasi) To: marwa ; ccie_voice@onlinestudylist.com Sent: Wednesday, October 22, 2008 12:36 PM Subject: RE: [OSL | CCIE_Voice] FW: PSTN Gateway Backbone GK configuration Thanks Marwa, I got the same at the below mentioned location. Seeing the configuration, I found that translation-profile is applied under voice-ports, however NO translation-profile is created; just seeing translation-rules??? Any advice! -Shadab From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of marwa Sent: Wednesday, October 22, 2008 3:51 PM To: Shadab Abbasi (moabbasi); ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] FW: PSTN Gateway Backbone GK configuration Hello, You can find the initial configurations for all the devices in the Proctor Labs support forum: http://proctorlabs.com/forum/ To access the forum, simply create a Proctor Labs account, which is free of charge, and use those credentials to enter the support forum. You'll find the configs you're looking for in the Voice FAQ section. Marwa - Original Message - From: Shadab Abbasi (moabbasi) To: ccie_voice@onlinestudylist.com Sent: Wednesday, October 22, 2008 10:54 AM Subject: [OSL | CCIE_Voice] FW: PSTN Gateway Backbone GK configuration Hello Experts, I am setting up my LAB planning to run PSTN GW Backbone (PSTN) - GK on the same router (2821) Can someone help me out with the configuration or sample? Regards, Shadab All - a few have asked what our default configs look like - they are the same for every lab and have a base level of IP connectivity. This does NOT mean that every L3 interface is necessarily created for you - some are your responsibility to create. This goes also for L2 VLANs - they may be created - but not applied or trunked to the router for L3 routing - again the candidate's responsibility. ALSO PLEASE NOTE: This configuration is based on the IP Addressing Scheme akin to all IPexpert Voice products. Also note that these base configs are specific to Pod 25 (so as to correlate with this posting here: http://proctorlabs.com/forum/showflat.php?Cat=Board=VFAQNumber=23583page=0view=collapsedsb=5o=fpart=1 )- so if you are using this for your own lab please be aware that the 2nd octet of your IP address will change depending on the Pod number you choose as your home pod. --- ** BEGIN HQ Router *** --- ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname P25-HQ-RTR ! boot-start-marker boot system flash:c2800nm-adventerprisek9_ivs-mz.124-3g.bin boot-end-marker ! logging buffered 51200 warnings ! no aaa new-model ! resource policy ! network-clock-participate wic 0 network-clock-select 1 T1 0/0/0 ip subnet-zero ! ! ip cef ! ! no ip domain lookup ! ! voice-card 0 no dspfarm ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! controller T1 0/0/0 description ** Connected to PSTN-WAN Controller T1 0/1/0 for T1 Data ** framing esf linecode b8zs channel-group 0 timeslots 1-24 ! ! ! ! ! interface Loopback0 ip address 172.25.100.1 255.255.255.0 ip ospf network point-to-point ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0:0 no ip address encapsulation frame-relay IETF frame-relay lmi-type ansi ! interface Serial0/0/0:0.1 point-to-point description ** Frame Relay PVC to BR1 Site ** ip address 162.25.101.1 255.255.255.0 ip ospf mtu-ignore frame-relay interface-dlci 201 ! interface Serial0/0/0:0.2 point-to-point description ** Frame Relay PVC to BR2 Site ** ip address 162.25.102.1 255.255.255.0 ip ospf mtu-ignore frame-relay interface-dlci 202 ! router ospf 1 log-adjacency-changes network 10.25.100.0 0.0.0.255 area 0 network 10.25.200.0 0.0.0.255 area 0 network 162.25.101.0 0.0.0.255 area 0 network 162.25.102.0 0.0.0.255 area 0 network 172.25.100.0 0.0.0.255 area 0 ! ip classless ! ! ip http server ip http authentication local no ip http secure-server ! ! ! ! ! control-plane ! ! ! ! ! ! ! ! ! ! gatekeeper shutdown ! ! line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 no login transport input telnet line vty 5 15 privilege level 15 no login transport input telnet ! scheduler allocate
Re: [OSL | CCIE_Voice] FW: PSTN Gateway Backbone GK configuration
I am using the below config, it is working for me, try it: - isdn switch-type primary-ni ! voice-card 0 no dspfarm ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! controller E1 0/2/0 pri-group timeslots 1-3,16 ! controller T1 0/3/0 framing esf linecode b8zs pri-group timeslots 1-3,24 ! controller T1 0/3/1 framing esf linecode b8zs pri-group timeslots 1-3,24 ! ! ! ! ! ! interface Serial0/2/0:15 no ip address isdn switch-type primary-ni isdn protocol-emulate network isdn incoming-voice voice no cdp enable ! interface Serial0/3/0:23 no ip address isdn switch-type primary-ni isdn protocol-emulate network isdn incoming-voice voice no cdp enable ! interface Serial0/3/1:23 no ip address isdn switch-type primary-ni isdn protocol-emulate network isdn incoming-voice voice no cdp enable ! ! voice-port 0/2/0:15 ! voice-port 0/3/0:23 ! voice-port 0/3/1:23 ! ! ! ! ! dial-peer voice 10 pots destination-pattern 915535 incoming called-number . port 0/3/0:23 ! dial-peer voice 11 pots destination-pattern 902773 port 0/3/1:23 ! dial-peer voice 12 pots destination-pattern 01176 incoming called-number . port 0/2/0:15 ! ! ! ! telephony-service load 7960-7940 P00403020214 max-ephones 4 max-dn 12 ip source-address 192.168.41.1 port 2000 create cnf-files version-stamp 7960 Feb 19 2007 15:52:07 max-conferences 8 gain -6 ! ! ephone-dn 1 number 911 ! ! ephone-dn 2 number 0119876543210 ! ! ephone-dn 3 number 902463 ! ! ephone-dn 4 number 916435 ! ! ephone-dn 5 number 212555 ! ! ephone 1 mac-address button 1:1 2:2 3:3 4:4 5:5 For the conection beteen PSTN router and your gw you need to create a crossover cable to connect the E1 / T1 make the connection as follows: 14 25 41 52 Regards, Bala. --- On Wed, 22/10/08, Shadab Abbasi (moabbasi) [EMAIL PROTECTED] wrote: From: Shadab Abbasi (moabbasi) [EMAIL PROTECTED] Subject: Re: [OSL | CCIE_Voice] FW: PSTN Gateway Backbone GK configuration To: marwa [EMAIL PROTECTED], ccie_voice@onlinestudylist.com Date: Wednesday, 22 October, 2008, 4:06 PM Thanks Marwa, I got the same at the below mentioned location. Seeing the configuration, I found that translation-profile is applied under voice-ports, however NO translation-profile is created; just seeing translation-rules??? Any advice! -Shadab From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of marwa Sent: Wednesday, October 22, 2008 3:51 PM To: Shadab Abbasi (moabbasi); ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] FW: PSTN Gateway Backbone GK configuration Hello, You can find the initial configurations for all the devices in the Proctor Labs support forum: http://proctorlabs.com/forum/ To access the forum, simply create a Proctor Labs account, which is free of charge, and use those credentials to enter the support forum. You'll find the configs you're looking for in the Voice FAQ section. Marwa - Original Message - From: Shadab Abbasi (moabbasi) To: ccie_voice@onlinestudylist.com Sent: Wednesday, October 22, 2008 10:54 AM Subject: [OSL | CCIE_Voice] FW: PSTN Gateway Backbone GK configuration Hello Experts, I am setting up my LAB planning to run PSTN GW Backbone (PSTN) – GK on the same router (2821) Can someone help me out with the configuration or sample? Regards, Shadab Get your preferred Email name! Now you can @ymail.com and @rocketmail.com. http://mail.promotions.yahoo.com/newdomains/aa/