of course
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
h323
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
!
voice class h323 1
h225 timeout tcp establish 3
h225 timeout setup 3
interface Vlan100
description ***Voice Vlan***
ip address VLAN100IP 255.255.255.0
ip pim dense-mode
h323-gateway voip interface
h323-gateway voip bind srcaddr VLAN100IP
voice-port 0/1/0
no battery-reversal
no comfort-noise
connection plar opx
caller-id enable
!
voice-port 0/1/1
no battery-reversal
no comfort-noise
connection plar opx
caller-id enable
!
voice-port 0/1/2
no battery-reversal
no comfort-noise
connection plar opx
caller-id enable
!
voice-port 0/1/3
no battery-reversal
no comfort-noise
connection plar opx
caller-id enable
!
dial-peer voice 1 pots
description ** FXO pots dial-peer **
incoming called-number .
port 0/1/0
!
dial-peer voice 2 pots
description ** FXO pots dial-peer **
incoming called-number .
port 0/1/1
!
dial-peer voice 3 pots
description ** FXO pots dial-peer **
incoming called-number .
port 0/1/2
!
dial-peer voice 4 pots
description ** FXO pots dial-peer **
incoming called-number .
port 0/1/3
!
dial-peer voice 100 voip
preference 2
destination-pattern .T
session target ipv4:172.30.55.11
voice-class codec 1
voice-class h323 1
dtmf-relay h245-signal h245-alphanumeric
no vad
!
dial-peer voice 5 pots
translation-profile outgoing STRIP9
preference 1
destination-pattern .T
port 0/1/0
!
dial-peer voice 6 pots
translation-profile outgoing STRIP9
preference 1
destination-pattern .T
port 0/1/1
!
dial-peer voice 7 pots
translation-profile outgoing STRIP9
preference 1
destination-pattern .T
port 0/1/2
!
dial-peer voice 8 pots
translation-profile outgoing STRIP9
preference 1
destination-pattern .T
port 0/1/3
!
!
!
Thank you very much
On 16 June 2013 09:14, Bill Lake wrote:
> Do you think sharing your config might help?
>
>
> On Sun, Jun 16, 2013 at 10:51 AM, Hesham Abdelkereem <
> heshamcentr...@gmail.com> wrote:
>
>> Dear All.
>>
>> I have configured H323 Gateway to use the 4 FXO ports on the router with
>> CUCM.
>> When I call in to the POTS line sometimes its working perfectly and
>> sometimes when I call in it give me like a faxtone and i hear no voice then
>> I drop the call and call again it works.
>> Also , There is a big delay to reach the PLAR number.
>>
>> Do you have any ideas how to fix that?
>>
>>
>> Many Thanks,
>> Hesham
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
