of course voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip h323 ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 ! voice class h323 1 h225 timeout tcp establish 3 h225 timeout setup 3
interface Vlan100 description ***Voice Vlan*** ip address VLAN100IP 255.255.255.0 ip pim dense-mode h323-gateway voip interface h323-gateway voip bind srcaddr VLAN100IP voice-port 0/1/0 no battery-reversal no comfort-noise connection plar opx XXXX caller-id enable ! voice-port 0/1/1 no battery-reversal no comfort-noise connection plar opx XXXX caller-id enable ! voice-port 0/1/2 no battery-reversal no comfort-noise connection plar opx XXXX caller-id enable ! voice-port 0/1/3 no battery-reversal no comfort-noise connection plar opx XXXX caller-id enable ! dial-peer voice 1 pots description ** FXO pots dial-peer ** incoming called-number . port 0/1/0 ! dial-peer voice 2 pots description ** FXO pots dial-peer ** incoming called-number . port 0/1/1 ! dial-peer voice 3 pots description ** FXO pots dial-peer ** incoming called-number . port 0/1/2 ! dial-peer voice 4 pots description ** FXO pots dial-peer ** incoming called-number . port 0/1/3 ! dial-peer voice 100 voip preference 2 destination-pattern .T session target ipv4:172.30.55.11 voice-class codec 1 voice-class h323 1 dtmf-relay h245-signal h245-alphanumeric no vad ! dial-peer voice 5 pots translation-profile outgoing STRIP9 preference 1 destination-pattern .T port 0/1/0 ! dial-peer voice 6 pots translation-profile outgoing STRIP9 preference 1 destination-pattern .T port 0/1/1 ! dial-peer voice 7 pots translation-profile outgoing STRIP9 preference 1 destination-pattern .T port 0/1/2 ! dial-peer voice 8 pots translation-profile outgoing STRIP9 preference 1 destination-pattern .T port 0/1/3 ! ! ! Thank you very much On 16 June 2013 09:14, Bill Lake <whl...@gmail.com> wrote: > Do you think sharing your config might help? > > > On Sun, Jun 16, 2013 at 10:51 AM, Hesham Abdelkereem < > heshamcentr...@gmail.com> wrote: > >> Dear All. >> >> I have configured H323 Gateway to use the 4 FXO ports on the router with >> CUCM. >> When I call in to the POTS line sometimes its working perfectly and >> sometimes when I call in it give me like a faxtone and i hear no voice then >> I drop the call and call again it works. >> Also , There is a big delay to reach the PLAR number. >> >> Do you have any ideas how to fix that? >> >> >> Many Thanks, >> Hesham >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com