Re: [OSL | CCIE_Voice] no DTMF Relay to UC via PSTN during HA (testing AAR)
Hi Vignesh, Would it be possible to make a test call from PSTN phone too?Is the result different than call made from SiteB PH2/PH3? Also it might be worth checking the "dtmf-relay" settings on relevant VoIP dial-peer(s) on SiteA GW too. Regards, --Somphol. On Wed, Jan 22, 2014 at 9:49 PM, Vignesh Sethuraman wrote: > Hello Mark, > > yes, I do have *mgcp dtmf-relay voip codec all mode out-of-band.* > > Thanks, > Viki > > > > > On Tue, Jan 21, 2014 at 8:57 PM, Mark Thrash (marthras) < > marth...@cisco.com> wrote: > >> Do you have the command >> >> Mgcp dtmf codec all out >> >> In your mgcp config >> >> From: Vignesh Sethuraman >> Date: Tuesday, January 21, 2014 at 1:51 PM >> To: ccievoice >> Subject: [OSL | CCIE_Voice] no DTMF Relay to UC via PSTN during HA >> (testing AAR) >> >> Hello All, >> >> Unity Connection not recognizing the password (no DTMF) when the call >> is routed as following during a high availability situation. >> >> SiteB PH2/PH3 ---> MGCP T1 Port of SiteB GW > My PSTN GW (use to switch >> call between all sites via pots dialpeers) -> SiteA H323 GW -> CUCM >> SUB > Unity Connection. >> >> * The Unity Connection is playing Message -- Enter you PIN >> * Unity Connection recognizes SiteB PH2 is a registered user's number , so >> asks for password >> * When pressing password unity connection does not recognize that any key >> is pressed >> >> I am facing the same issue as mentioned in the below link but I am using >> Skinny integration of CUC to CUCM. >> http://onlinestudylist.com/archives/ccie_voice/2013-August/085101.html >> >> >> Please let me know what I am missing. >> >> Thanks, >> Viki >> >> >> >> >> >> > > ___ > Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: > > iPexpert on YouTube: www.youtube.com/ipexpertinc > ___ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
Re: [OSL | CCIE_Voice] no DTMF Relay to UC via PSTN during HA (testing AAR)
Hello Mark, yes, I do have *mgcp dtmf-relay voip codec all mode out-of-band.* Thanks, Viki On Tue, Jan 21, 2014 at 8:57 PM, Mark Thrash (marthras) wrote: > Do you have the command > > Mgcp dtmf codec all out > > In your mgcp config > > From: Vignesh Sethuraman > Date: Tuesday, January 21, 2014 at 1:51 PM > To: ccievoice > Subject: [OSL | CCIE_Voice] no DTMF Relay to UC via PSTN during HA > (testing AAR) > > Hello All, > > Unity Connection not recognizing the password (no DTMF) when the call > is routed as following during a high availability situation. > > SiteB PH2/PH3 ---> MGCP T1 Port of SiteB GW > My PSTN GW (use to switch > call between all sites via pots dialpeers) -> SiteA H323 GW -> CUCM > SUB > Unity Connection. > > * The Unity Connection is playing Message -- Enter you PIN > * Unity Connection recognizes SiteB PH2 is a registered user's number , so > asks for password > * When pressing password unity connection does not recognize that any key > is pressed > > I am facing the same issue as mentioned in the below link but I am using > Skinny integration of CUC to CUCM. > http://onlinestudylist.com/archives/ccie_voice/2013-August/085101.html > > Please let me know what I am missing. > > Thanks, > Viki > > > > > > ___ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
Re: [OSL | CCIE_Voice] no DTMF Relay to UC via PSTN during HA (testing AAR)
Do you have the command Mgcp dtmf codec all out In your mgcp config From: Vignesh Sethuraman mailto:sethuvign...@gmail.com>> Date: Tuesday, January 21, 2014 at 1:51 PM To: ccievoice mailto:ccie_voice@onlinestudylist.com>> Subject: [OSL | CCIE_Voice] no DTMF Relay to UC via PSTN during HA (testing AAR) Hello All, Unity Connection not recognizing the password (no DTMF) when the call is routed as following during a high availability situation. SiteB PH2/PH3 ---> MGCP T1 Port of SiteB GW > My PSTN GW (use to switch call between all sites via pots dialpeers) -> SiteA H323 GW -> CUCM SUB > Unity Connection. * The Unity Connection is playing Message -- Enter you PIN * Unity Connection recognizes SiteB PH2 is a registered user's number , so asks for password * When pressing password unity connection does not recognize that any key is pressed I am facing the same issue as mentioned in the below link but I am using Skinny integration of CUC to CUCM. http://onlinestudylist.com/archives/ccie_voice/2013-August/085101.html Please let me know what I am missing. Thanks, Viki ___ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
[OSL | CCIE_Voice] no DTMF Relay to UC via PSTN during HA (testing AAR)
Hello All, Unity Connection not recognizing the password (no DTMF) when the call is routed as following during a high availability situation. SiteB PH2/PH3 ---> MGCP T1 Port of SiteB GW > My PSTN GW (use to switch call between all sites via pots dialpeers) -> SiteA H323 GW -> CUCM SUB > Unity Connection. * The Unity Connection is playing Message -- Enter you PIN * Unity Connection recognizes SiteB PH2 is a registered user's number , so asks for password * When pressing password unity connection does not recognize that any key is pressed I am facing the same issue as mentioned in the below link but I am using Skinny integration of CUC to CUCM. http://onlinestudylist.com/archives/ccie_voice/2013-August/085101.html Please let me know what I am missing. Thanks, Viki ___ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
