Re: [OSL | CCIE_Voice] unity and SRST wired problem , not the classic bug question!
Hi Vik, The 4082032220 is CTI route point in CCM, the CTI route point solution works only if I am disabling isdn outgoing ie redirectin-number under serial interface 0/2/0:23, If I am enbaling isdn outgoing ie redirect-number, then the CTI solution is not working. Could please let me know the above solution is right or I am missing some thing. --- On Wed, 14/1/09, Vik Malhi vma...@ipexpert.com wrote: From: Vik Malhi vma...@ipexpert.com Subject: Re: [OSL | CCIE_Voice] unity and SRST wired problem , not the classic bug question! To: mmailb...@yahoo.com, jeremy co jeremy.coo...@gmail.com, ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Date: Wednesday, 14 January, 2009, 12:34 PM In your lab what is 4082032220? It should be a RP with a VM Prof Mask = 3001 Call Fwd to VM. -- Vik Malhi – CCIE #13890, CCSI #31584 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Balamurugan Singaram mmailb...@yahoo.com Reply-To: mmailb...@yahoo.com Date: Mon, 12 Jan 2009 21:33:19 -0800 (PST) To: jeremy co jeremy.coo...@gmail.com, ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com, Vik Malhi vma...@ipexpert.com Subject: Re: [OSL | CCIE_Voice] unity and SRST wired problem , not the classic bug question! Hi Vik, For SRST voice mail follow the CTI route point solution it, but till I am facing the redirect number problem. THE CTI debug is paste below, could you please let me know your suggestion please Best is solution to upgrade the IOS in home lab ? HQ# *Jan 11 04:14:13.417: ISDN Se0/3/0:23 Q931: TX - SETUP pd = 8 callref = 0x000F Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98383 Exclusive, Channel 3 Facility i = 0x9F8B0100A10F020101020100800748512D32303031 Protocol Profile = Networking Extensions 0xA10F020101020100800748512D32303031 Component = Invoke component Invoke Id = 1 Operation = CallingName Name presentation allowed Name = HQ-2001 Progress Ind i = 0x8083 - Origination address is non-ISDN Display i = 'HQ-2001' Calling Party Number i = 0x0081, '2001' Plan:Unknown, Type:Unknown Called Party Number i = 0x80, '19723033001' Plan:Unknown, Type:Unknown *Jan 11 04:14:13.457: ISDN Se0/3/0:23 Q931: RX - CALL_PROC pd = 8 callref = 0x 800F Channel ID i = 0xA98383 Exclusive, Channel 3 *Jan 11 04:14:13.517: ISDN Se0/3/0:23 Q931: RX - ALERTING pd = 8 callref = 0x8 00F Progress Ind i = 0x8188 - In-band info or appropriate now available *Jan 11 04:14:18.549: ISDN Se0/3/0:23 Q931: RX - SETUP pd = 8 callref = 0x0181 Bearer Capability i = 0x9090A2 Standard = CCITT Transfer Capability = 3.1kHz Audio Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Facility i = 0x9F8B0100A10F020101020100800748512D32303031 Protocol Profile = Networking Extensions 0xA10F020101020100800748512D32303031 Component = Invoke component Invoke Id = 1 Operation = CallingName Name presentation allowed Name = HQ-2001 Progress Ind i = 0x8083 - Origination address is non-ISDN Display i = 'HQ-2001' Calling Party Number i = 0x0081, '2001' Plan:Unknown, Type:Unknown Called Party Number i = 0xA1, '4082032220' Plan:ISDN, Type:National Redirecting Number i = 0x7FE0FF, '3001' Plan:Reserved, Type:Reserved *Jan 11 04:14:18.577: ISDN Se0/3/0:23 Q931: TX - CALL_PROC pd = 8 callref = 0x --- On Tue, 13/1/09, Vik Malhi vma...@ipexpert.com wrote: From: Vik Malhi vma...@ipexpert.com Subject: Re: [OSL | CCIE_Voice] unity and SRST wired problem , not the classic bug question! To: jeremy co jeremy.coo...@gmail.com, ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Date: Tuesday, 13 January, 2009, 12:30 AM I don’t get any RDNIS so you are doing much better than me. I think this the RDNIS with SRST has bugs that are fixed in 12.4(7). What IOS are you using? -- Vik Malhi – CCIE #13890, CCSI #31584 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: jeremy co jeremy.coo...@gmail.com Date: Mon, 12 Jan 2009 21:51:57 +1100 To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] unity and SRST wired
Re: [OSL | CCIE_Voice] unity and SRST wired problem , not the classic bug question!
In your lab what is 4082032220? It should be a RP with a VM Prof Mask = 3001 Call Fwd to VM. -- Vik Malhi CCIE #13890, CCSI #31584 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Balamurugan Singaram mmailb...@yahoo.com Reply-To: mmailb...@yahoo.com Date: Mon, 12 Jan 2009 21:33:19 -0800 (PST) To: jeremy co jeremy.coo...@gmail.com, ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com, Vik Malhi vma...@ipexpert.com Subject: Re: [OSL | CCIE_Voice] unity and SRST wired problem , not the classic bug question! Hi Vik, For SRST voice mail follow the CTI route point solution it, but till I am facing the redirect number problem. THE CTI debug is paste below, could you please let me know your suggestion please Best is solution to upgrade the IOS in home lab ? HQ# *Jan 11 04:14:13.417: ISDN Se0/3/0:23 Q931: TX - SETUP pd = 8 callref = 0x000F Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98383 Exclusive, Channel 3 Facility i = 0x9F8B0100A10F020101020100800748512D32303031 Protocol Profile = Networking Extensions 0xA10F020101020100800748512D32303031 Component = Invoke component Invoke Id = 1 Operation = CallingName Name presentation allowed Name = HQ-2001 Progress Ind i = 0x8083 - Origination address is non-ISDN Display i = 'HQ-2001' Calling Party Number i = 0x0081, '2001' Plan:Unknown, Type:Unknown Called Party Number i = 0x80, '19723033001' Plan:Unknown, Type:Unknown *Jan 11 04:14:13.457: ISDN Se0/3/0:23 Q931: RX - CALL_PROC pd = 8 callref = 0x 800F Channel ID i = 0xA98383 Exclusive, Channel 3 *Jan 11 04:14:13.517: ISDN Se0/3/0:23 Q931: RX - ALERTING pd = 8 callref = 0x8 00F Progress Ind i = 0x8188 - In-band info or appropriate now available *Jan 11 04:14:18.549: ISDN Se0/3/0:23 Q931: RX - SETUP pd = 8 callref = 0x0181 Bearer Capability i = 0x9090A2 Standard = CCITT Transfer Capability = 3.1kHz Audio Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Facility i = 0x9F8B0100A10F020101020100800748512D32303031 Protocol Profile = Networking Extensions 0xA10F020101020100800748512D32303031 Component = Invoke component Invoke Id = 1 Operation = CallingName Name presentation allowed Name = HQ-2001 Progress Ind i = 0x8083 - Origination address is non-ISDN Display i = 'HQ-2001' Calling Party Number i = 0x0081, '2001' Plan:Unknown, Type:Unknown Called Party Number i = 0xA1, '4082032220' Plan:ISDN, Type:National Redirecting Number i = 0x7FE0FF, '3001' Plan:Reserved, Type:Reserved *Jan 11 04:14:18.577: ISDN Se0/3/0:23 Q931: TX - CALL_PROC pd = 8 callref = 0x --- On Tue, 13/1/09, Vik Malhi vma...@ipexpert.com wrote: From: Vik Malhi vma...@ipexpert.com Subject: Re: [OSL | CCIE_Voice] unity and SRST wired problem , not the classic bug question! To: jeremy co jeremy.coo...@gmail.com, ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Date: Tuesday, 13 January, 2009, 12:30 AM I don¹t get any RDNIS so you are doing much better than me. I think this the RDNIS with SRST has bugs that are fixed in 12.4(7). What IOS are you using? -- Vik Malhi CCIE #13890, CCSI #31584 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: jeremy co jeremy.coo...@gmail.com Date: Mon, 12 Jan 2009 21:51:57 +1100 To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] unity and SRST wired problem , not the classic bug question! Hi, I tried to set up SRST and unity scenario. Here is the problem unity--HQ ---pstn-BR1 (SRST) 2001 3001 2001 call 3001 and CFNA redirect call to unity via pstn , redirecting number works fine but only 8 digits passed to unity Here is the out put of debug isdn on HQ when call forwarded to unity. HQ :499-202-2 BR1 :899-303-3XXX voice pilot number : 2229 Mar 11 20:01:40.060: ISDN Se0/0:23 Q931: RX - SETUP pd = 8 callref = 0x008E Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit
[OSL | CCIE_Voice] unity and SRST wired problem , not the classic bug question!
Hi, I tried to set up SRST and unity scenario. Here is the problem unity--HQ ---pstn-BR1 (SRST) 2001 3001 2001 call 3001 and CFNA redirect call to unity via pstn , redirecting number works fine but only 8 digits passed to unity Here is the out put of debug isdn on HQ when call forwarded to unity. HQ :499-202-2 BR1 :899-303-3XXX voice pilot number : 2229 Mar 11 20:01:40.060: ISDN Se0/0:23 Q931: RX - SETUP pd = 8 callref = 0x008E Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Calling Party Number i = 0x2181, '4992022002' Plan:ISDN, Type:National Called Party Number i = 0xA1, '499209' Plan:ISDN, Type:National Redirecting Number i = 0xFF, '8993033001' Plan:Reserved, Type:Reserved I can see from call viewer in unity : dialed numbercalling number forwarding 930330014992022002 93033001 So why only 8 digits pass to ccm? Jeremy
Re: [OSL | CCIE_Voice] unity and SRST wired problem , not the classic bug question!
I don¹t get any RDNIS so you are doing much better than me. I think this the RDNIS with SRST has bugs that are fixed in 12.4(7). What IOS are you using? -- Vik Malhi CCIE #13890, CCSI #31584 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: jeremy co jeremy.coo...@gmail.com Date: Mon, 12 Jan 2009 21:51:57 +1100 To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] unity and SRST wired problem , not the classic bug question! Hi, I tried to set up SRST and unity scenario. Here is the problem unity--HQ ---pstn-BR1 (SRST) 2001 3001 2001 call 3001 and CFNA redirect call to unity via pstn , redirecting number works fine but only 8 digits passed to unity Here is the out put of debug isdn on HQ when call forwarded to unity. HQ :499-202-2 BR1 :899-303-3XXX voice pilot number : 2229 Mar 11 20:01:40.060: ISDN Se0/0:23 Q931: RX - SETUP pd = 8 callref = 0x008E Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Calling Party Number i = 0x2181, '4992022002' Plan:ISDN, Type:National Called Party Number i = 0xA1, '499209' Plan:ISDN, Type:National Redirecting Number i = 0xFF, '8993033001' Plan:Reserved, Type:Reserved I can see from call viewer in unity : dialed numbercalling number forwarding 930330014992022002 93033001 So why only 8 digits pass to ccm? Jeremy
Re: [OSL | CCIE_Voice] unity and SRST wired problem , not the classic bug question!
Hi Vik, For SRST voice mail follow the CTI route point solution it, but till I am facing the redirect number problem. THE CTI debug is paste below, could you please let me know your suggestion please Best is solution to upgrade the IOS in home lab ? HQ# *Jan 11 04:14:13.417: ISDN Se0/3/0:23 Q931: TX - SETUP pd = 8 callref = 0x000F Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98383 Exclusive, Channel 3 Facility i = 0x9F8B0100A10F020101020100800748512D32303031 Protocol Profile = Networking Extensions 0xA10F020101020100800748512D32303031 Component = Invoke component Invoke Id = 1 Operation = CallingName Name presentation allowed Name = HQ-2001 Progress Ind i = 0x8083 - Origination address is non-ISDN Display i = 'HQ-2001' Calling Party Number i = 0x0081, '2001' Plan:Unknown, Type:Unknown Called Party Number i = 0x80, '19723033001' Plan:Unknown, Type:Unknown *Jan 11 04:14:13.457: ISDN Se0/3/0:23 Q931: RX - CALL_PROC pd = 8 callref = 0x 800F Channel ID i = 0xA98383 Exclusive, Channel 3 *Jan 11 04:14:13.517: ISDN Se0/3/0:23 Q931: RX - ALERTING pd = 8 callref = 0x8 00F Progress Ind i = 0x8188 - In-band info or appropriate now available *Jan 11 04:14:18.549: ISDN Se0/3/0:23 Q931: RX - SETUP pd = 8 callref = 0x0181 Bearer Capability i = 0x9090A2 Standard = CCITT Transfer Capability = 3.1kHz Audio Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Facility i = 0x9F8B0100A10F020101020100800748512D32303031 Protocol Profile = Networking Extensions 0xA10F020101020100800748512D32303031 Component = Invoke component Invoke Id = 1 Operation = CallingName Name presentation allowed Name = HQ-2001 Progress Ind i = 0x8083 - Origination address is non-ISDN Display i = 'HQ-2001' Calling Party Number i = 0x0081, '2001' Plan:Unknown, Type:Unknown Called Party Number i = 0xA1, '4082032220' Plan:ISDN, Type:National Redirecting Number i = 0x7FE0FF, '3001' Plan:Reserved, Type:Reserved *Jan 11 04:14:18.577: ISDN Se0/3/0:23 Q931: TX - CALL_PROC pd = 8 callref = 0x --- On Tue, 13/1/09, Vik Malhi vma...@ipexpert.com wrote: From: Vik Malhi vma...@ipexpert.com Subject: Re: [OSL | CCIE_Voice] unity and SRST wired problem , not the classic bug question! To: jeremy co jeremy.coo...@gmail.com, ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Date: Tuesday, 13 January, 2009, 12:30 AM I don’t get any RDNIS so you are doing much better than me. I think this the RDNIS with SRST has bugs that are fixed in 12.4(7). What IOS are you using? -- Vik Malhi – CCIE #13890, CCSI #31584 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: jeremy co jeremy.coo...@gmail.com Date: Mon, 12 Jan 2009 21:51:57 +1100 To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] unity and SRST wired problem , not the classic bug question! Hi, I tried to set up SRST and unity scenario. Here is the problem unity--HQ ---pstn-BR1 (SRST) 2001 3001 2001 call 3001 and CFNA redirect call to unity via pstn , redirecting number works fine but only 8 digits passed to unity Here is the out put of debug isdn on HQ when call forwarded to unity. HQ :499-202-2 BR1 :899-303-3XXX voice pilot number : 2229 Mar 11 20:01:40.060: ISDN Se0/0:23 Q931: RX - SETUP pd = 8 callref = 0x008E Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Calling Party Number i = 0x2181, '4992022002' Plan:ISDN, Type:National Called Party Number i = 0xA1, '499209' Plan:ISDN, Type:National Redirecting Number i = 0xFF, '8993033001' Plan:Reserved, Type:Reserved I can see from call viewer in unity : dialed number calling number forwarding 93033001 4992022002 93033001 So why only 8 digits pass to ccm? Jeremy Get your preferred Email name! Now you can @ymail.com and @rocketmail.com. http://mail.promotions.yahoo.com/newdomains/aa/
Re: [OSL | CCIE_Voice] unity and SRST wired problem , not the classic bug question!
I have the same problem in IOS 12.13 and later, could please let me know the workaround for this. --- On Tue, 13/1/09, Vik Malhi vma...@ipexpert.com wrote: From: Vik Malhi vma...@ipexpert.com Subject: Re: [OSL | CCIE_Voice] unity and SRST wired problem , not the classic bug question! To: jeremy co jeremy.coo...@gmail.com, ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Date: Tuesday, 13 January, 2009, 12:30 AM I don’t get any RDNIS so you are doing much better than me. I think this the RDNIS with SRST has bugs that are fixed in 12.4(7). What IOS are you using? -- Vik Malhi – CCIE #13890, CCSI #31584 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE RS Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: jeremy co jeremy.coo...@gmail.com Date: Mon, 12 Jan 2009 21:51:57 +1100 To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] unity and SRST wired problem , not the classic bug question! Hi, I tried to set up SRST and unity scenario. Here is the problem unity--HQ ---pstn-BR1 (SRST) 2001 3001 2001 call 3001 and CFNA redirect call to unity via pstn , redirecting number works fine but only 8 digits passed to unity Here is the out put of debug isdn on HQ when call forwarded to unity. HQ :499-202-2 BR1 :899-303-3XXX voice pilot number : 2229 Mar 11 20:01:40.060: ISDN Se0/0:23 Q931: RX - SETUP pd = 8 callref = 0x008E Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Calling Party Number i = 0x2181, '4992022002' Plan:ISDN, Type:National Called Party Number i = 0xA1, '499209' Plan:ISDN, Type:National Redirecting Number i = 0xFF, '8993033001' Plan:Reserved, Type:Reserved I can see from call viewer in unity : dialed number calling number forwarding 93033001 4992022002 93033001 So why only 8 digits pass to ccm? Jeremy New Email names for you! Get the Email name you#39;ve always wanted on the new @ymail and @rocketmail. Hurry before someone else does! http://mail.promotions.yahoo.com/newdomains/aa/
