Re: [OSL | CCIE_Voice] CUE signaling QOS on switch
the way 3750 packet forwarding by using asic which is different from ios router dose, as a result the cli is not supported , use 'show mls qos xxx stat' instead.-ikizoo Date: Wed, 17 Apr 2013 14:46:40 -0700 From: kamina.j...@yahoo.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] CUE signaling QOS on switch on one of the practice lab the need is to police the signaling packets to and from CUE inbound into the HQ switch to 32 kbps and then remark the DSCP to 0. I built up the config below but dont see any packets matched on the show policy-map interface command. CUE IP is 10.1.6.253 . CUCM IP is 10.10.210.10 (pub) and 10.10.210.11 (sub) .is the access list built correctly? access-list 110 permit tcp host 10.1.6.253 any eq 2748 ! class-map match-all CUE-SIGNAL match access-group 110 ! policy-map CUEMAP class cti-qbe set dscp af31 bandwidth 20 ! interface Fa0/1/0 description HQ-ROUTER-INTERFACE service-policy input CUEMAP mls qosmls qos map cos 0 8 16 24 32 46 48 56mls qos map policed-dscp 24 26 to 8 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CUE signaling QOS on switch
Dears, So the above access list is correct ?? CUE signaling traffic only used this port ? 2748 Is there any document showed the used port for the CUE traffic ?? On Thu, Apr 18, 2013 at 12:46 AM, Jack Kamina wrote: > on one of the practice lab the need is to police the signaling packets to > and from CUE inbound into the HQ switch to 32 kbps and then remark the DSCP > to 0. I built up the config below but dont see any packets matched on the > show policy-map interface command. CUE IP is 10.1.6.253 . CUCM IP is > 10.10.210.10 (pub) and 10.10.210.11 (sub) .is the access list built > correctly? > > access-list 110 permit tcp host *10.1.6.253* any eq 2748 > > ! > > class-map match-all CUE-SIGNAL > > match access-group 110 > > ! > > policy-map CUEMAP > > class cti-qbe > > set dscp af31 > > bandwidth 20 > > ! > > interface Fa0/1/0 > > description HQ-ROUTER-INTERFACE > > service-policy input CUEMAP > > > mls > qos > mls qos map cos 0 8 16 24 32 46 48 56 > mls qos map policed-dscp 24 26 to 8 > > > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com