Re: [OSL | CCIE_Voice] Lab 4 AB GK registration problem
Hi Mike,
I'm noticing from your initial debugs that the 156.26.1.70:1719 ip
address/port the one confirming the GRQ message from BR2-RTR
***
value RasMessage ::= gatekeeperConfirm :
{
requestSeqNum 126
protocolIdentifier { 0 0 8 2250 0 4 }
gatekeeperIdentifier {"PL"}
rasAddress ipAddress :
{
ip '*9C1A0146*'H
port *1719*
}
}
After the Angel's suggestion this should have been corrected, so would you
please send the same debugs now from both routers? plus a show gatek zone
status, also I see that you are not pinging from the br2 l0 interface but
the closest to hq l0 interface (which might be the serial interface), please
try to use ping with options to verify that loopbacks can see each other,
Thanks!,
On Thu, Mar 11, 2010 at 2:24 PM, Mike Peterson wrote:
> Hi Angel,
>
> Thanks for helping me out with this GK issue. Yes indeed the GW doesn't
> receive the message , that is why we are seeing GRQ and GCF.
> I do have full connectivity b/w HQ/BR2/PUB/SUB .
> Below are the ping's you sugested to post.
>
> Thanks a lot in advance for your time and help.
>
> HQ#ping 192.21.66.254->from HQ to loopback of BR2
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 192.21.66.254, timeout is 2 seconds:
> !
> Success rate is 100 percent (5/5), round-trip min/avg/max = 1/5/12 ms
> HQ#
>
>
> BR2-RTR#ping 192.21.64.254-->from BR2 to loopback of HQ
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 192.21.64.254, timeout is 2 seconds:
> !
> Success rate is 100 percent (5/5), round-trip min/avg/max = 8/14/32 ms
> BR2-RTR#
>
>
>
>
>
> HQ#ping 192.168.0.11 >from HQ to CUCM PUB
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 192.168.0.11, timeout is 2 seconds:
> !
> Success rate is 100 percent (5/5), round-trip min/avg/max = 1/4/8 ms
>
>
>
> HQ#ping 192.168.0.12 -> from HQ to CUCM SUB
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 192.168.0.12, timeout is 2 seconds:
> !
> Success rate is 100 percent (5/5), round-trip min/avg/max = 16/25/40 ms
> HQ#
>
>
> BR2-RTR#ping 192.168.0.11 ->from BR2 CUCM PUB
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 192.168.0.11, timeout is 2 seconds:
> !
> Success rate is 100 percent (5/5), round-trip min/avg/max = 16/27/44 ms
>
>
> BR2-RTR#ping 192.168.0.12---> from BR2 to CUCM SUB
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 192.168.0.12, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 20/40/52 ms
> BR2-RTR#
>
>
>
> --
> *From:* Angel Perez **
> *Sent:* Thu, March 11, 2010 1:17:17 PM
> *Subject:* RE: [OSL | CCIE_Voice] Lab 4 AB GK registration problem
>
> Just to verify, can you ping hq loo 0 192.21.64.254 from br2? And br2 loop
> 192.21.66.254 from hq?
>
> It looks like br2 gw ask for registration GRQ, and then gk try to confirm
> GCF but the gw can't recieve the message
>
> hth
> --
> Date: Thu, 11 Mar 2010 08:54:30 -0800
>
>
> Subject: Re: [OSL | CCIE_Voice] Lab 4 AB GK registration problem
>
> Hi All,
>
> I did tried your suggestion (to add loopback IP address :
> zone local PL cisco.com 192.21.64.254 ) which does make sense but it
> doesn't work.
> I took a look at "deb ras" and I am seeing only GRQ (a message sent by
> endpoint to GK ) and GCF (A reply from gatekeeper to endpoint
> which indicates the transport address of the gatekeeper RAS channel) and I
> am not seeing GRJ (the reject the endpoint request for registration) so
> something I am missing or I am hitting a BUG!
> The "deb gatekeeper main 19" or "deb h225 asn1" still doesn't give me a
> clue of why GK is failing to register.
>
> Once again thanks for your time and help.
>
> Kind Regards,
>
> Mike
>
>
> Note: This is the change I made:
>
> gatekeeper
> zone local PL cisco.com 192.21.64.254
> zone prefix PL 1... gw-priority 10 gk-trunk_2
> zone prefix PL 1... gw-priority 9 gk-trunk_1
> zone prefix PL 1... gw-priority 0 BR2-RTR
> zone prefix PL 5... gw-priority 10 gk-trunk_2
> zone prefix PL 5... gw-priority 9 gk-trunk_1
> zone prefix PL 5... gw-priority 0 BR2-RTR
> no shutdown
> !
>
>
>
>
> --
> Compartir tus mejores FOTOS es fácil en Messenger ¡
Re: [OSL | CCIE_Voice] Lab 4 AB GK registration problem
Hi Angel, Thanks for helping me out with this GK issue. Yes indeed the GW doesn't receive the message , that is why we are seeing GRQ and GCF. I do have full connectivity b/w HQ/BR2/PUB/SUB . Below are the ping's you sugested to post. Thanks a lot in advance for your time and help. HQ#ping 192.21.66.254->from HQ to loopback of BR2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.21.66.254, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/5/12 ms HQ# BR2-RTR#ping 192.21.64.254-->from BR2 to loopback of HQ Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.21.64.254, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 8/14/32 ms BR2-RTR# HQ#ping 192.168.0.11 >from HQ to CUCM PUB Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.0.11, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/4/8 ms HQ#ping 192.168.0.12 -> from HQ to CUCM SUB Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.0.12, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 16/25/40 ms HQ# BR2-RTR#ping 192.168.0.11 ->from BR2 CUCM PUB Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.0.11, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 16/27/44 ms BR2-RTR#ping 192.168.0.12---> from BR2 to CUCM SUB Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.0.12, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 20/40/52 ms BR2-RTR# From: Angel Perez Sent: Thu, March 11, 2010 1:17:17 PM Subject: RE: [OSL | CCIE_Voice] Lab 4 AB GK registration problem Just to verify, can you ping hq loo 0 192.21.64.254 from br2? And br2 loop 192.21.66.254 from hq? It looks like br2 gw ask for registration GRQ, and then gk try to confirm GCF but the gw can't recieve the message hth Date: Thu, 11 Mar 2010 08:54:30 -0800 Subject: Re: [OSL | CCIE_Voice] Lab 4 AB GK registration problem Hi All, I did tried your suggestion (to add loopback IP address : zone local PL cisco.com 192.21.64.254 ) which does make sense but it doesn't work. I took a look at "deb ras" and I am seeing only GRQ (a message sent by endpoint to GK ) and GCF (A reply from gatekeeper to endpoint which indicates the transport address of the gatekeeper RAS channel) and I am not seeing GRJ (the reject the endpoint request for registration) so something I am missing or I am hitting a BUG! The "deb gatekeeper main 19" or "deb h225 asn1" still doesn't give me a clue of why GK is failing to register. Once again thanks for your time and help. Kind Regards, Mike Note: This is the change I made: gatekeeper zone local PL cisco.com 192.21.64.254 zone prefix PL 1... gw-priority 10 gk-trunk_2 zone prefix PL 1... gw-priority 9 gk-trunk_1 zone prefix PL 1... gw-priority 0 BR2-RTR zone prefix PL 5... gw-priority 10 gk-trunk_2 zone prefix PL 5... gw-priority 9 gk-trunk_1 zone prefix PL 5... gw-priority 0 BR2-RTR no shutdown ! Compartir tus mejores FOTOS es fácil en Messenger ¡DESCUBRE cómo! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 4 AB GK registration problem
Just to verify, can you ping hq loo 0 192.21.64.254 from br2? And br2 loop 192.21.66.254 from hq? It looks like br2 gw ask for registration GRQ, and then gk try to confirm GCF but the gw can't recieve the message hth Date: Thu, 11 Mar 2010 08:54:30 -0800 From: polobi...@yahoo.com To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Lab 4 AB GK registration problem Hi All, I did tried your suggestion (to add loopback IP address : zone local PL cisco.com 192.21.64.254 ) which does make sense but it doesn't work. I took a look at "deb ras" and I am seeing only GRQ (a message sent by endpoint to GK ) and GCF (A reply from gatekeeper to endpoint which indicates the transport address of the gatekeeper RAS channel) and I am not seeing GRJ (the reject the endpoint request for registration) so something I am missing or I am hitting a BUG! The "deb gatekeeper main 19" or "deb h225 asn1" still doesn't give me a clue of why GK is failing to register. Once again thanks for your time and help. Kind Regards, Mike Note: This is the change I made: gatekeeper zone local PL cisco.com 192.21.64.254 zone prefix PL 1... gw-priority 10 gk-trunk_2 zone prefix PL 1... gw-priority 9 gk-trunk_1 zone prefix PL 1... gw-priority 0 BR2-RTR zone prefix PL 5... gw-priority 10 gk-trunk_2 zone prefix PL 5... gw-priority 9 gk-trunk_1 zone prefix PL 5... gw-priority 0 BR2-RTR no shutdown ! _ ¿Quieres saber qué PC eres? ¡Descúbrelo aquí! http://www.quepceres.com/___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 4 AB GK registration problem
Hi All, I did tried your suggestion (to add loopback IP address : zone local PL cisco.com 192.21.64.254 ) which does make sense but it doesn't work. I took a look at "deb ras" and I am seeing only GRQ (a message sent by endpoint to GK ) and GCF (A reply from gatekeeper to endpoint which indicates the transport address of the gatekeeper RAS channel) and I am not seeing GRJ (the reject the endpoint request for registration) so something I am missing or I am hitting a BUG! The "deb gatekeeper main 19" or "deb h225 asn1" still doesn't give me a clue of why GK is failing to register. Once again thanks for your time and help. Kind Regards, Mike Note: This is the change I made: gatekeeper zone local PL cisco.com 192.21.64.254 zone prefix PL 1... gw-priority 10 gk-trunk_2 zone prefix PL 1... gw-priority 9 gk-trunk_1 zone prefix PL 1... gw-priority 0 BR2-RTR zone prefix PL 5... gw-priority 10 gk-trunk_2 zone prefix PL 5... gw-priority 9 gk-trunk_1 zone prefix PL 5... gw-priority 0 BR2-RTR no shutdown ! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 4 AB GK registration problem
Thank you, was working through this same problem in Volume 2 Lab 2. The gatekeeper syntax in the Proctor Guide is missing the IP address, I'm assuming is needed because HQ router is also an H323 gateway. The BR2 router could register when I specified the loopback on HQ but not the subinterface. On Wed, Mar 10, 2010 at 11:49 AM, Angel Perez wrote: > Hello: > > At the gw you have: > > h323-gateway voip id PL ipaddr 192.21.64.254 1719 > > So at the gk you may have: > > zone local PL cisco.com *192.21.64.254 * > ** > Becouse it is the gk signaling address that you are specifying > > Let us know > > -- > Date: Wed, 10 Mar 2010 09:56:03 -0800 > From: polobi...@yahoo.com > To: cciet...@gmail.com; ccie_voice@onlinestudylist.com > > Subject: Re: [OSL | CCIE_Voice] Lab 4 AB GK registration problem > > Hi CCIETalk, > > Thanks for your help and quick replay. > Please see attached the partial configs from HQ and BR2-RTR . > Yes , I do have the gateway command into gw. > The GK doesn't register even though I have IP connectivity with > CCM/HQ/BR2-RTR! I also fallow a good troubleshooting doc from Cisco : > http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a008011221e.shtml > and other docs from > Cisco.com <http://cisco.com/> plus the LAB 4A/B docs. > > Thanks again for your time and help. > > Kind regards, > > Mike > > -- > *From:* CCIETalk.com > *To:* Mike Peterson ; CCIE_VOICE online studylist < > ccie_voice@onlinestudylist.com> > *Sent:* Wed, March 10, 2010 7:06:38 AM > *Subject:* Re: [OSL | CCIE_Voice] Lab 4 AB GK registration problem > > Post your configs please > > On 3/10/10, Mike Peterson wrote: > > > > Hi all, > > > > I am working on LAB 4 A/B and I am having GK registration issuesand my GK > > couldn't register as well in > > > > > > the debugs (debug RAS and debug h225 ans1...) there is no reference > about > > this gateway trying to register on gatekeeper and this debugs on the > > gateway nothing shows up at all (it's empty).Also, I can ping from HQ and > > BR2-RTR each other as well CUCM. > > > > Any ideas will be very appreciated. > > debug gatekeeper main 10 > > debug h225 asn1 > > debug ras > > Please see the attached debug file. > > > > Thanks a lot in advance. > > > > Kind Regards, > > > > Mike > > > > > > > > > > -- > Sent from my mobile device > > www.ccietalk.com > > > -- > Actualízate gratis al nuevo Internet Explorer 8 y navega más > seguro<http://www.microsoft.com/spain/windows/internet-explorer/default.aspx> > > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- -Shikamaru ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 4 AB GK registration problem
Hello: At the gw you have: h323-gateway voip id PL ipaddr 192.21.64.254 1719 So at the gk you may have: zone local PL cisco.com 192.21.64.254 Becouse it is the gk signaling address that you are specifying Let us know Date: Wed, 10 Mar 2010 09:56:03 -0800 From: polobi...@yahoo.com To: cciet...@gmail.com; ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Lab 4 AB GK registration problem Hi CCIETalk, Thanks for your help and quick replay. Please see attached the partial configs from HQ and BR2-RTR . Yes , I do have the gateway command into gw. The GK doesn't register even though I have IP connectivity with CCM/HQ/BR2-RTR! I also fallow a good troubleshooting doc from Cisco : http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a008011221e.shtml and other docs from Cisco.com plus the LAB 4A/B docs. Thanks again for your time and help. Kind regards, Mike From: CCIETalk.com To: Mike Peterson ; CCIE_VOICE online studylist Sent: Wed, March 10, 2010 7:06:38 AM Subject: Re: [OSL | CCIE_Voice] Lab 4 AB GK registration problem Post your configs please On 3/10/10, Mike Peterson wrote: > > Hi all, > > I am working on LAB 4 A/B and I am having GK registration issuesand my GK > couldn't register as well in > > > the debugs (debug RAS and debug h225 ans1...) there is no reference about > this gateway trying to register on gatekeeper and this debugs on the > gateway nothing shows up at all (it's empty).Also, I can ping from HQ and > BR2-RTR each other as well CUCM. > > Any ideas will be very appreciated. > debug gatekeeper main 10 > debug h225 asn1 > debug ras > Please see the attached debug file. > > Thanks a lot in advance. > > Kind Regards, > > Mike > > > > -- Sent from my mobile device www.ccietalk.com _ Escucha a quienes ya han probado Windows 7 ¡Hazlo aquí! http://www.sietesunpueblodeexpertos.com/index_windows7.html___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 4 AB GK registration problem
Hi CCIETalk, Thanks for your help and quick replay. Please see attached the partial configs from HQ and BR2-RTR . Yes , I do have the gateway command into gw. The GK doesn't register even though I have IP connectivity with CCM/HQ/BR2-RTR! I also fallow a good troubleshooting doc from Cisco : http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a008011221e.shtml and other docs from Cisco.com plus the LAB 4A/B docs. Thanks again for your time and help. Kind regards, Mike From: CCIETalk.com To: Mike Peterson ; CCIE_VOICE online studylist Sent: Wed, March 10, 2010 7:06:38 AM Subject: Re: [OSL | CCIE_Voice] Lab 4 AB GK registration problem Post your configs please On 3/10/10, Mike Peterson wrote: > > Hi all, > > I am working on LAB 4 A/B and I am having GK registration issuesand my GK > couldn't register as well in > > > the debugs (debug RAS and debug h225 ans1...) there is no reference about > this gateway trying to register on gatekeeper and this debugs on the > gateway nothing shows up at all (it's empty).Also, I can ping from HQ and > BR2-RTR each other as well CUCM. > > Any ideas will be very appreciated. > debug gatekeeper main 10 > debug h225 asn1 > debug ras > Please see the attached debug file. > > Thanks a lot in advance. > > Kind Regards, > > Mike > > > > -- Sent from my mobile device www.ccietalk.com HQ# relevant info pertain to GK registration issue voice service voip h323 no call service stop sip bind control source-interface FastEthernet0/0.102 bind media source-interface FastEthernet0/0.102 ! ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 interface Loopback0 ip address 192.21.64.254 255.255.255.0 .. dial-peer voice 911 pots destination-pattern 911 no digit-strip ! dial-peer voice 1 pots incoming called-number . direct-inward-dial ! dial-peer voice 91212 pots destination-pattern 91212T forward-digits 10 ! dial-peer voice 5000 voip destination-pattern 2123945... voice-class codec 1 session protocol sipv2 session target ipv4:192.168.0.12 incoming called-number . dtmf-relay rtp-nte no vad ! dial-peer voice 5001 voip preference 1 destination-pattern 2123945... voice-class codec 1 session protocol sipv2 session target ipv4:192.168.0.11 dtmf-relay rtp-nte no vad ! ! ! sip-ua retry invite 2 timers trying 300 ! ! gatekeeper zone local PL cisco.com zone prefix PL 1... gw-priority 10 gk-trunk_2 zone prefix PL 1... gw-priority 9 gk-trunk_1 zone prefix PL 1... gw-priority 0 BR2-RTR zone prefix PL 5... gw-priority 10 gk-trunk_2 zone prefix PL 5... gw-priority 9 gk-trunk_1 zone prefix PL 5... gw-priority 0 BR2-RTR no shutdown ! ! HQ#sh gatek end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - Total number of active registrations = 0 HQ#sh gatek gw-type-prefix GATEWAY TYPE PREFIX TABLE = ccielab1-HQ# HQ#ping 192.168.0.11 > CUCM PUB Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.0.11, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/4/8 ms HQ#ping 192.21.66.254 --> loop 0 of BR2-RTR Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.21.66.254, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/5/16 ms HQ#ping 192.168.0.12 ->CUCM SUB Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.0.12, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 16/25/40 ms HQ# BR2-RTR# config pertain to GK registration voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip h323 no call service stop sip bind control source-interface FastEthernet0/0 bind media source-interface FastEthernet0/0 registrar server expires max 600 min 60 ! ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 ! ! ! voice class h323 1 h225 timeout tcp establish 3 interface Loopback0 ip address 192.21.66.254 255.255.255.0 h323-gateway voip interface h323-gateway voip id PL ipaddr 192.21.64.254 1719 h323-gateway voip h323-id BR2-RTR h323-gateway voip tech-prefix 3 h323-gateway voip bind srcaddr 192.21.66.254 ! dial-peer voice 1 voip voice-class codec 1 incoming called-number . ! dial-peer voice 100 pots incoming called-number . direct-inward-dial ! dial-peer voice 901134 pots destination-pattern 901134T port 2/0:23 ! dial-peer
Re: [OSL | CCIE_Voice] Lab 4 AB GK registration problem
Hi All, Thank you for your help in advance. Please see attached the HQ and BR2-RTR partial config. The GK doesn't register even though I have IP connectivity with CCM/HQ/BR2-RTR! I also fallow a troubleshooting doc from Cisco : http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a008011221e.shtml plus the LAB 4A/B docs. Kind Regards, Mike HQ# relevant info pertain to GK registration issue voice service voip h323 no call service stop sip bind control source-interface FastEthernet0/0.102 bind media source-interface FastEthernet0/0.102 ! ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 interface Loopback0 ip address 192.21.64.254 255.255.255.0 .. dial-peer voice 911 pots destination-pattern 911 no digit-strip ! dial-peer voice 1 pots incoming called-number . direct-inward-dial ! dial-peer voice 91212 pots destination-pattern 91212T forward-digits 10 ! dial-peer voice 5000 voip destination-pattern 2123945... voice-class codec 1 session protocol sipv2 session target ipv4:192.168.0.12 incoming called-number . dtmf-relay rtp-nte no vad ! dial-peer voice 5001 voip preference 1 destination-pattern 2123945... voice-class codec 1 session protocol sipv2 session target ipv4:192.168.0.11 dtmf-relay rtp-nte no vad ! ! ! sip-ua retry invite 2 timers trying 300 ! ! gatekeeper zone local PL cisco.com zone prefix PL 1... gw-priority 10 gk-trunk_2 zone prefix PL 1... gw-priority 9 gk-trunk_1 zone prefix PL 1... gw-priority 0 BR2-RTR zone prefix PL 5... gw-priority 10 gk-trunk_2 zone prefix PL 5... gw-priority 9 gk-trunk_1 zone prefix PL 5... gw-priority 0 BR2-RTR no shutdown ! ! HQ#sh gatek end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - Total number of active registrations = 0 HQ#sh gatek gw-type-prefix GATEWAY TYPE PREFIX TABLE = ccielab1-HQ# HQ#ping 192.168.0.11 > CUCM PUB Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.0.11, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/4/8 ms HQ#ping 192.21.66.254 --> loop 0 of BR2-RTR Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.21.66.254, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/5/16 ms HQ#ping 192.168.0.12 ->CUCM SUB Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.0.12, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 16/25/40 ms HQ# BR2-RTR# config pertain to GK registration voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip h323 no call service stop sip bind control source-interface FastEthernet0/0 bind media source-interface FastEthernet0/0 registrar server expires max 600 min 60 ! ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 ! ! ! voice class h323 1 h225 timeout tcp establish 3 interface Loopback0 ip address 192.21.66.254 255.255.255.0 h323-gateway voip interface h323-gateway voip id PL ipaddr 192.21.64.254 1719 h323-gateway voip h323-id BR2-RTR h323-gateway voip tech-prefix 3 h323-gateway voip bind srcaddr 192.21.66.254 ! dial-peer voice 1 voip voice-class codec 1 incoming called-number . ! dial-peer voice 100 pots incoming called-number . direct-inward-dial ! dial-peer voice 901134 pots destination-pattern 901134T port 2/0:23 ! dial-peer voice 3000 voip translation-profile outgoing 3000 destination-pattern 3000 voice-class codec 1 voice-class h323 1 session target ipv4:192.168.0.12 dtmf-relay h245-alphanumeric no vad ! dial-peer voice 3001 voip translation-profile outgoing 3000 preference 1 destination-pattern 3000 voice-class codec 1 voice-class h323 1 session target ipv4:192.168.0.10 dtmf-relay h245-alphanumeric no vad ! dial-peer voice 999 pots translation-profile outgoing 8digitANI destination-pattern 999 port 2/0:23 forward-digits 3 ! dial-peer voice 15 voip destination-pattern [15]... voice-class codec 1 session target ras tech-prefix 1# no vad ! ! gateway timer receive-rtp 300 BR2-RTR# sh gateway H.323 ITU-T Version: 4.0 H323 Stack Version: 0.1 H.323 service is up Gateway BR2-RTR is not registered to any gatekeeper Alias list (CLI configured) H323-ID BR2-RTR Alias list (last RCF) is empty H323 resource thresholding is Disabled BR2-RTR# BR2-RTR# BR2-RTR#ping 192.21.64.254-->loop of HQ Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.21.64.254, timeout is
Re: [OSL | CCIE_Voice] Lab 4 AB GK registration problem
Post your configs please On 3/10/10, Mike Peterson wrote: > > Hi all, > > I am working on LAB 4 A/B and I am having GK registration issuesand my GK > couldn't register as well in > > > the debugs (debug RAS and debug h225 ans1...) there is no reference about > this gateway trying to register on gatekeeper and this debugs on the > gateway nothing shows up at all (it's empty).Also, I can ping from HQ and > BR2-RTR each other as well CUCM. > > Any ideas will be very appreciated. > debug gatekeeper main 10 > debug h225 asn1 > debug ras > Please see the attached debug file. > > Thanks a lot in advance. > > Kind Regards, > > Mike > > > > -- Sent from my mobile device www.ccietalk.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
