Re: Unidentified subject!

2002-03-14 Thread Joerg Schilling

From: Bob [EMAIL PROTECTED]

CDrtools 1.11a17

[root@herakleion zim]# uname -a
Linux herakleion.purplefrog.com 2.4.7-10 #1 Thu Sep 6 17:27:27 EDT 2001 i686 unknown
[root@herakleion zim]# cat /etc/redhat-release 
Red Hat Linux release 7.2 (Enigma)


  I'm having poor luck re-writing CD-RWs.

  I almost always get errors when burning to CD-RW media.  I can
rarely record a full image.  I have succeeded with fresh (un-recorded)
CD-RWs, and once with a used CD-RW.  Failures happen whether I am
actively using the machine or not (I can go to bed with an image
burning, and wake up to a failure message and a disk whose tail end is
un-readable)

  I have burned two successful CD-Rs, and one coaster.


  Other non-critical problems:

  This is a Dell Inspiron 8100 laptop, and the stinking CD drive is on
the same IDE controller as the hard drive.  While blanking or
fixating, the machine is unable to access the hard drive, and any
program which attempts to access the hard drive will freeze until the
blanking operation is complete.  For a blank=all, I have time to go to
lunch.  While recording data, I can read mail, surf and do other
stuff, though.

  I have not yet attempted a cdrecord from single-user mode (no
daemons running).


[root@herakleion zim]# ~thoth/src/cdrtools-1.11/cdrecord/OBJ/i686-linux-cc/cdrecord 
blank=fast dev=0,0,0 speed=0 -v zim2.iso 
Cdrecord 1.11a17 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.19
Using libscg version 'schily-0.6'
atapi: 1
Device type: Removable CD-ROM
Version: 0
Response Format: 1
Vendor_info: 'MATSHITA'
Identifikation : 'UJDA330 '
Revision   : '1.50'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Drive buf size : 1359872 = 1328 KB
FIFO size  : 4194304 = 4096 KB
Track 01: data  588 MB
Total size: 675 MB (66:57.73) = 301330 sectors
Lout start: 676 MB (66:59/55) = 301330 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Reference speed: 2
  Is not unrestricted
  Is erasable
  ATIP start of lead in:  -11745 (97:25/30)
  ATIP start of lead out: 359363 (79:53/38)
  speed low: 0 speed high: 4
  power mult factor: 4 6
  recommended erase/write power: 5
  A2 values: 00 00 00
Disk type:Phase change
Manuf. index: 40
Manufacturer: INFODISC Technology Co., Ltd.
Blocks total: 1166730 Blocks current: 1166730 Blocks remaining: 865400
Starting to write CD/DVD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
/home/thoth/src/cdrtools-1.11/cdrecord/OBJ/i686-linux-cc/cdrecord: OPC failed.
Blanking PMA, TOC, pregap
Blanking time:   90.729s
Performing OPC...
Starting new track at sector: 0
Track 01: 308 of 588 MB written (fifo 100%) 
2.1x./home/thoth/src/cdrtools-1.11/cdrecord/OBJ/i686-linux-cc/cdrecord: Input/output 
error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 02 69 75 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 03 00 02 89 DE 0C 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 166366 (valid) 
cmd finished after 0.208s timeout 40s

Try to clean the lens, stop smoking (if you do), use different media
or let the drive be repaired.

Jörg

 EMail:[EMAIL PROTECTED] (home) Jörg Schilling D-13353 Berlin
   [EMAIL PROTECTED]   (uni)  If you don't have iso-8859-1
   [EMAIL PROTECTED]   (work) chars I am Jorg Schilling
 URL:  http://www.fokus.gmd.de/usr/schilling   ftp://ftp.fokus.gmd.de/pub/unix
 
 FOKUS at CeBIT Hall 11, A14 - BerliOS at CeBIT Hall 11 D11 (Future Market)
 
 Meet me at CeBIT in Hall 11 D11 on the BerliOS booth - www.berlios.de


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]




[no subject]

2002-03-14 Thread Frans J King







-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]




Re: CD-RW mayhem

2002-03-14 Thread Bill Mudd


I just did a blank=all at speed=4. It took 18min.

   I may have to buy another brand and see if it treats me better.

I used a Memorex CD-RW disc (Platinum 650mb 4x rewrite speed). Definitely 
not a high quality disc.

   Are you saying that you can do a blank=all without having all
accesses to the HD block until the blank is complete?

No. It did tie up access to the HD. Some programs worked some froze up 
until the blanking completed.

   Can anyone confirm or deny this same-channel IDE issue I'm having
with blanking and fixating?

My configuration is IDE ch. 2 = HD as master  CD-RW drive as slave. But 
while access to the HD is poor with this configuration the blank=all 
still works. I just did it twice. And it has never failed to work in the 
past. Changing your configuration to having the CD-RW drive on a channel 
not shared by a HD will probably only solve the HD access problem not the 
failure to blank problem. Your failure to get blank=all to work 
consistantly sounds like it might be a CD-RW drive problem.

Bill



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]